8 Port IP Extender W/Gigabit PoE Switch Up To 600 Meters (1,960 Ft.)
|
|
By: Nitek
Video Transmission Solutions
|
The Nitek 8 Port IP Extender w/Gigabit PoE Switch
ER 8500U is a IP video multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with from 1 to 8 ET1500U Transmitter units (sold separately). ER8500 U IP ethernet network extender-PoE Inserter (EtherStretch) can quickly turn any ordinary 4 pair category network cables into a high speed network communication & PoE path. When operating over a 4 pair category network cable, extended distances of up to 600 meters (1,960 feet) can be achieved. The ER8500U ethernet extender receiver along with the ET1500U transmitters require very little installation time & absolutely no set up or configuration. The System is transparent to the network and has no IP or MAC addressing. Simply connect your network devices to the network ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power.This Etherstretch solution allows for the utilization of existing UTP infrastructure to both transmit IP cameras and other network devices and to power them over the network as well.
An internal power supply in the ER-8500U Receiver provides PoE to the system. The Etherstretch network extender system extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow.
→ Rack mounted multi-channel Etherstretch solution
→ Includes a built-in power source for all connected devices
→ Each channel is capable of 10/100 connectivity to field devices
→ Gigabit output to network
→ Remotely power and transmit IP devices over coax up to 500 meters/1,640 feet
→ Short circuit, over current and over voltage protection
→ Supports IEEE802.3af (15.4W) and IEEE802.3at (25.5W)
→ No MAC or IP addressing required
→ Variable power input 100 - 240V
→ Built-in Ethernet and PoE surge protection
Unit | Transceiver
|
Size | 1 RU x 12.7"D
|
Power Requirements | IEC380 power connector - 100-240 VAC input
|
Ethernet Connection | [1] Auto Configuring 10 / 100 RJ45 port
|
EtherStretch Link Connection | [8] RJ45 Ports
|
LED Indicators | - Link Status, Power, PoE Out, 10Mb or 100mb
|
Shipping Weight | 10 lbs.
|
Mounting | Standard rack mounting
|
Operating Temperature | 0 - 140 degrees Fahrenheit
|
Humidity | Up to 85% non-condensing
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.