By: Kramer
Video & Computer Signal Processing Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
HDMI Twisted Pair Transmitter

The TP−582T is a high−quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS−232 and IR input signals to an HDBaseT twisted pair signal. The TP−582R converts the HDBaseT twisted pair signal back to Ethernet 100BaseT, RS−232, IR and two HDMI outputs, and de−embeds the audio to S/PDIF and TOSLINK® audio outputs.

TP-582T features include:

  • Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).

  • HDBaseT Technology.

  • HDTV Compatible.

  • HDCP Compliance.

  • HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC.

  • 3D Pass-Through.

  • EDID PassThru - Passes EDID signals between the source and display.

  • Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS−232 interface, allowing status requests and control of the destination unit.

  • Ethernet Interface - Passes 100BaseT.

  • System Range - Signals of up to 6.75Gbps (up to 1080p@60Hz 36−bit) over a range of up to 130m (430ft) when using BC−HDKat6a cables.

  • Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BCP−DGKat724 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.

  • Control - Front panel and contact closure switching.

  • Indicators - Status LEDs for input selection, output, link and power.

  • Compact MegaTOOLS® - 2 units can be rack mounted side−by−side in a 1U rack space with the optional universal rack adapter.

INPUTS: 2 HDMI connectors, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ−45 connector, 1 RS−232 on a 9−pin D−sub connector, 1 remote contact closure on a terminal block connector.
OUTPUT: 1 HDBaseT RJ−45 connector.
MAX. DATA RATE: 6.75Gbps (2.25Gbps per graphic channel).
DIMENSIONS: 18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H.
WEIGHT: 0.6kg (1.4lbs).
OPTIONS: RK−T2B 19” rack mount.

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.