Search
http://www.avsupply.com/images/logos/kramer-logo.gif

Kramer

Kramer Sierra Video Audio Video Equipment
Video & Computer Signal Processing Solutions

Categories:

Showing All 473 Products...
rc-78r.jpg
Kramer: rc-78r

8 Button Room Controller

The RC−78R is an eight−button configurable room controller for multimedia rooms. It controls audio components, video components and other room facilities such as lights...

rc-116.jpg
Kramer: rc-ir3

IR Remote Control

The RC−IR3 is an infrared wireless remote control unit for all Kramer IR controllable switchers. The remote can switch up to 96x96 inputs and

sid-dp.jpg
Kramer: sid-dp

DP DGKat TP Step-In Module

The SID−DP is a DGKat™ twisted pair transmitter and step−in commander for DisplayPort and unbalanced stereo audio signals. The unit includes a...

616r-t.jpg
Kramer: 616r-t

DVI Optical Trans & Receiver

The 616T and 616R are a small and lightweight, detachable fiber optic transmitter and receiver pair. They transmit uncompressed resolutions of up to WQXGA...

614r-t.jpg
Kramer: 614r-t

DVI Optical Trans & Receiver

The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at...

tp575.jpg
Kramer: tp-575

1:2 HDMI Twisted Pair Receiver & Transceiver

The TP−575 is a DGKat™ twisted pair line driver for HDMI over twisted pair signals. The unit receives a twisted pair signal and outputs both an HDMI and twisted pair...

tp582r.jpg
Kramer: tp-582r

HDMI Twisted Pair Receiver

The TP−582R is a high−quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI...

tp582t.jpg
Kramer: tp-582t

HDMI Twisted Pair Transmitter

The TP−582T is a high−quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects...

fc340.jpg
Kramer: fc-340

3G HD−SDI Scan Converter

The FC−340 is a broadcast−quality video scaler, audio embedder/de−embedder and scan converter for digital video signals up to 3G HD−SDI. The unit inputs an SDI...

vs-88hn.jpg
Kramer: vs-88hn

8x8 HDMI Matrix Switcher

The VS−88HN is a high−performance matrix switcher for HDMI signals. It reclocks and equalizes the signal and can route any input to any or all outputs...

rc116.jpg
Kramer: rc-116

8-Button Controller

The RC-116 is a presentation controller for twisted pair transmitters. The unit can switch up to 16 sources that are interconnected in series through looping inputs to a single...

vs-88hdcpxl.jpg
Kramer: vs-88hdcpxl

8x8 DVI (HDCP) Matrix Switcher

The VS−88HDCPxl is a high−performance matrix switcher for DVI and HDMI signals on a DVI−D connector. It reclocks and equalizes the signal and can route any input to...

vs-401usb.jpg
Kramer: vs-401usb

4x1 USB 2.0 Switcher

The VS−401USB is a high−quality 4x1 USB switcher. It accepts up to four USB devices and switches the selected device to the

tp574.jpg
Kramer: tp-574

HDMI Twisted Pair Receiver

The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair...

vp-200k.jpg
Kramer: vp-200k

1:2 High Resolution UXGA Distribution Amplifier

The VP200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The VP 200K takes one input, provides correct buffering and...

Input    1 UXGA on an 15-pin HD connector
Outputs    2 UXGA on 15-pin HD connectors
Max. Output level    2.2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.03%
pt-120.jpg
Kramer: pt-120

Computer Graphics Video Over Twisted Pair Receiver

The PT120 is a twisted pair receiver for computer graphics video signals. The PT 120 converts a twisted pair signal from a PT-110 transmitter (or other compatible...

Input    1 RJ-45 connector
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output level    1.5Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    2.9% (worst case)
vp-728.jpg
Kramer: vp-728

9-Input ProScale Presentation Scaler/Switcher

Inputs    4 x universal Y/CV, Pb/C, Pr (composite, s-Video and component) 1 Vpp/75Ω on RCA connectors; 2 x UXGA on a 15-pin HD connector (VGA through UXGA); 2 x HDMI connectors; 1 x USB connector; For each universal input there is a corresponding (unbalanced) audio stereo input (1V nom/25kΩ minimum) and digital stereo S/PDIF input (32kHz to 96kHz sample frequency/75Ω) on RCA connectors; For each UXGA input there is a corresponding (unbalanced) audio stereo input on a 3.5mm mini jack connector
Outputs    1 HDMI connector; 1 UXGA format on a 15-pin HD connector; 1 unbalanced audio stereo output (1V nom/50Ω) on RCA connectors; 1 digital stereo S/PDIF output (32kHz to 96kHz sample frequency/75Ω) on an RCA connector
Compliance with HDMI Standard    Supports HDMI and HDCP
Output Resolution    Native HDMI, 640x480x60Hz, 640x480x75Hz, 800x600x50Hz, 800x600x60Hz, 800x600x75Hz, 1024x768x50Hz, 1024x768x60Hz, 1024x768x75Hz, 1280x768x50Hz, 1280x768x60Hz, 1280x720x60Hz, 1280x800x60Hz, 1280x1024x50Hz, 1280x1024x60Hz, 1280x1024x75Hz, 1366x768x50Hz, 1366x768x60Hz, 1400x1050x50Hz, 1400x1050x60Hz, 1600x1200x50Hz, 1600x1200x60Hz, 1680x1050x60Hz, 1920x1080x60Hz, 1920x1200x60Hz, 480px60Hz, 576px60Hz, 720px50Hz, 720px60Hz, 1080ix50Hz, 1080ix60Hz, 1080px50Hz, 1080px60Hz, 720x480x59.94Hz, 1280x720x59.94Hz, 1920x1080ix59.94Hz, 1920x1080x23.98Hz, 1920x1080x29.97Hz, 1920x1080x59.94Hz or custom
Control    Front panel buttons/OSD, IR remote control, RS-232 on a 9-pin D-sub connector
vp-419xl.jpg
Kramer: vp-419xl

Video To Computer Graphics Video/HDTV ProScale Digital Scaler

The VP-419xl is a high-performance digital scaler for composite, s-Video and component (480i/576i) video signals. The VP 419xl scales a video input to a...

Input    1 VGA/SVGA/XGA/SXGA on a 15-pin HD (F) connector; 1 composite video on an RCA connector; 1 component video (Y, Cb, Cr) on RCA connectors;>br> 1 s-Video on a 4-pin connector
Output    1 RGB/YPbPr on a 15-pin HD (F) connector
Output Resolution    VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), HDTV: 480p, 576p, 720p, 1080i
Output Refresh Rate    60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions
Controls    Front panel buttons and infrared remote for menu driven OSD control
tp-122.jpg
Kramer: tp-122

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver
The TP-121 and TP122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video...
Input    1 RJ-45 line in connector
Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Max. Resolution    WUXGA & 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
900xl.jpg
Kramer: 900xl

Stereo Audio Power Amplifier

The 900-xl is a high-performance power amplifier for line level stereo audio signals. The 900 xl accepts unbalanced audio signals on either of two RCA or 3.5mm...

Inputs    1 unbalanced stereo audio on a 3.5mm mini jack connector; 1 unbalanced stereo audio on RCA connectors
Output    1 stereo differential speaker output
Output Power    2x10W (4Ω)
Input Sensitivity    460mV
Output Music Power    2x40W (4Ω)
vp-420.jpg
Kramer: vp-420

Computer Graphics & HDTV Digital Scaler

The VP-420 is a high-performance digital scaler for computer graphics video and HDTV signals. VP 420 scales the input up or down to a selectable computer graphics...

Input    1 PC/HD on a 15-pin HD connector, RGBHV/YPbPr
Output    1 PC/HD on a 15-pin HD connector, RGBHV/YPbPr
Output Resolutions    PC: VGA, SVGA, XGA, 1280x800, UXGA, SXGA, WXGA, SXGA , WXGA , WSXGA, WUXGA; HDTV: 480p, 576p, 720p @50/60Hz, 1080p @50/60Hz, 1080i @50/60Hz
Output Refresh Rate    60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions
Processing Delay    3 frames
rc-8ir.jpg
Kramer: rc-8ir

8-Button Universal Room Controller With IR Learning

The RC8iR is an 8-button room controller for multimedia rooms. The RC 8iR controls audio components, video components and other room facilities such as lights and...

Ports    2 RS-232 on terminal block connectors, 1 RS-485 on terminal block connectors, 1 Ethernet RJ-45 port, 2 IR
Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 2 IR emitters on terminal block connectors (for RC-6IR and RC-8IR)
Power Source    12V DC, 155mA
Dimensions    6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
vp-4x4k.jpg
Kramer: vp-4x4k

4x4 Computer Graphics Video & Balanced Stereo Audio Matrix Switcher

The VP4x4K is a high-performance matrix switcher for computer graphics video signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. The VP...

Inputs    4 UXGA on 15-pin HD connectors; 4 unbalanced stereo audio signals on 3.5mm mini jacks
Outputs    4 UXGA on 15-pin HD connectors;4 balanced stereo audio signals on 5-pin terminal block connectors
Max. Output Level    Video: 2.2Vpp; Audio: >15Vpp
Bandwidth (-3dB)    Video: 400MHz; Audio: 19kHz
Diff. Gain    0.07%
tp-45.jpg
Kramer: tp-45

Component Video Or Computer Graphics Video With Audio Over Twisted Pair Transmitter
The TP45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The...
Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vp-506.jpg
Kramer: vp-506

Video Scan Converter

The VP−506 is a high−quality scan converter for down−scaling DVI, computer graphics (VGA) and component video (YPbPr) to PAL or NTSC video. It supports VGA up to...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
sid-dvi.jpg
Kramer: sid-dvi

DVI DGKat TP Step-In Module

The SID−DVI is a DGKat™ twisted pair transmitter and step−in commander for DVI and unbalanced stereo audio signals. The unit includes a “Step−In”...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vp-505.jpg
Kramer: vp-505

3G HD-SDI Scan Converter

The VP−505 is a high−performance scan converter for digital video signals up to 3G HD−SDI. The unit de−embeds the audio to unbalanced stereo audio and...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vp-501n.jpg
Kramer: vp-501n

Video Scan Converter

The VP−501N is a scan converter for computer graphics and HDTV component video signals. It converts the input up to UXGA (1600x1200) and HDTV (1080p) to composite and...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vp-482.jpg
Kramer: vp-482

HDMI to 3G HD−SDI Scaler

The VP−482 is a high−performance digital scaler for HDMI signals. It up− and down−scales the input to two SDI, HD−SDI or 3G HD−SDI signals and...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vp-481.jpg
Kramer: vp-481

Presentation Scaler/Switcher

The VP−481 is a high−performance digital scaler for DVI signals. The unit embeds S/PDIF or stereo audio into the video and up− or down−scales to two SDI,...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vs-44hdcp.jpg
Kramer: vs-44hdcp

4x4 DVI Matrix Switcher

The VS−44HDCP is a high−quality, HDCP compliant 4x4 DVI matrix switcher. It reclocks and equalizes the signals and can route any of the four DVI/HDMI (over DVI−I...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vp-438.jpg
Kramer: vp-438

Presentation Scaler/Switcher

The VP−438 is a high−performance presentation scaler/switcher for HDMI, computer graphics, composite video and component video signals. It scales the video, embeds the...

Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
vm-2n.jpg
Kramer: vm-2n

1:2 Composite Video & Stereo Audio Distribution Amplifier

VM-2N: 1:2 Composite Video & Stereo Audio Distribution Amplifier The VM-2N is a high-performance distribution amplifier for composite or SDI video and unbalanced...

Input    1 Composite Video - DC Coupled, 1Vpp/75Ω on A BNC Connector; 1 Balanced Stereo/Mono Audio - 4dB/50kΩ on RCA Connectors
Output    2 Composite Video - 1Vpp/75Ω on BNC Connectors; 2 Balanced Stereo/Mono Audio - 4dB/50Ω on RCA Connectors
Max. Audio Level (-3dB)    22dB
Video Bandwidth    Exceeding 400MHz
Audio Bandwidth    >100kHz (1dB)
vm-30av.jpg
Kramer: vm-30av

1:3 Composite Video & Stereo Audio Distribution Amplifier

The VM-30AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. VM 30AV provides controls to compensate for signal losses...

Inputs    1 Video, 1 Vpp/75Ω on an RCA Connector; 1 Audio Stereo, 1Vpp/70kΩ on RCA Connectors
Outputs    3 Video, 1 Vpp/75Ω on RCA Connectors; 3 Audio Stereo, 1Vpp/150Ω on RCA Connectors
Max. Output Level    Video: 2Vpp; Audio: 5.4Vpp
Bandwidth (-3dB)    Video: 430MHz, Audio: 100kHz
Diff. Gain    0.04%
vm-30avb.jpg
Kramer: vm-30avb

1:3 Composite Video & Stereo Audio Distribution Amplifier

The VM-30AVB is a compact distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 30AVB provides controls to compensate for...

Inputs    1 Video, 1 Vpp/75Ω on A BNC Connector; 1 Audio Stereo, 1Vpp/70kΩ on RCA Connectors
Outputs    3 Video, 1 Vpp/75Ω on BNC Connectors; 3 Audio Stereo, 1Vpp/150Ω on RCA Connectors
Max. Output Level    Video: 2Vpp; Audio: 5.4Vpp
Bandwidth (-3dB)    Video: 430MHz, Audio: 100kHz
Diff. Gain    0.04%
103av.jpg
Kramer: 103av

1:3 Composite Video & Stereo Audio Distribution Amplifier

The 103-AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. The 103 AVtakes one input, provides correct buffering and...

Inputs    1 Composite Video, 1Vpp/75Ω on an RCA Connector; 1 Unbalanced Stereo Audio, 1Vpp/33kΩ, on 3.5 Mm Mini Jack
Outputs    3 Composite Video, 1Vpp/75Ω on RCA Connectors; 3 Unbalanced Stereo Audio, 1Vpp/150Ω on 3.5mm Mini Jacks
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    320MHz
Audio Bandwidth (-3dB)    20kHz
vm-5s.jpg
Kramer: vm-5s

1:5 Composite Video & Stereo Audio Distribution Amplifier

The VM-5S is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 5S takes one input, provides correct...

Input    1 Video AC/DC Coupled (Internal Jumper), Looping 1Vpp/75Ω on BNC Connectors with Rear Termination Switch; 1 Balanced Stereo/Mono Audio, Up to 21v/50kΩ on RCA Connectors
Outputs    5 Video, 1Vpp/75Ω on BNC Connectors; 5 Balanced Stereo/Mono Audio, Up to 21v/220Ω on RCA Connectors
Max. Video Output    1.7Vpp
Video Bandwidth (-3dB)    340MHz
Audio Bandwidth(-3dB)    20kHz
vm-5arii.jpg
Kramer: vm-5arii

1:5 Composite Video & Stereo Audio Distribution Amplifier

The VM-5ARII is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 5ARII provides controls to...

Inputs    1 Video, Composite or Single Component, Looping, 1Vpp/75Ω on BNC Connectors with Termination Switch; 1 Unbalanced Stereo Audio Looping, 4dB/50kΩ on RCA Connectors
Outputs    5 Video, Composite or Single Component, 1Vpp/75Ω on BNC Connectors; 5 Unbalanced Stereo Audio, 4dB/150Ω, 27Vpp Max. on RCA Connectors
Max. Output Level    Video 2.2Vpp; Audio 27Vpp
Video Bandwidth(-3dB)    360MHz
Audio Bandwidth(-3dB)    60kHz
vm-10xl.jpg
Kramer: vm-10xl

1:10 Composite Video & Stereo Audio Distribution Amplifier

The VM10xl is a state of the art, broadcast quality 1:10 distribution amplifier for composite or SDI video signals with unbalanced stereo or balanced mono audio. The VM...

Inputs    1 Composite Video, Looping, 1Vpp/75Ω with Termination Switch on BNC Connectors. 2 Balanced Stereo/Mono Audio, Looping, 1Vpp/50kΩ on RCA Connectors
Outputs    10 Composite Video, 1Vpp/75Ω on BNC Connectors. 10 Balanced Stereo/Mono Audio, 1Vpp/50Ω on RCA Connectors
Max. Output Level    Video: 1.6Vpp; Audio: 26.5Vpp
Bandwidth (-3dB)    Video 360MHz; Audio 100kHz
Diff. Gain    0.07%
vm-20arii.jpg
Kramer: vm-20arii

1:20 Composite Video & Stereo Audio Distribution Amplifier

The VM20ARII is a multi-format, high-performance distribution amplifier that can also be configured for composite video and unbalanced stereo audio signals. The...

Inputs    4 Video, Looping, 1Vpp/75Ω on BNC Connectors with Termination Switches; 4 Unbalanced Stereo
Outputs    Video: 20 (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5) 1Vpp/75Ω on BNC Connectors; Audio: 20 (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5) Stereo or Balanced Mono, 4dBu/50Ω, 27Vpp Max. on RCA Connectors
Video Bandwidth(-3dB)    430MHz
Audio Bandwidth(-3dB)    110kHz
Diff. Gain    0.06%
101l.jpg
Kramer: 101l

1:1 Composite Video Line Amplifier
The 101-L is a high-performance line amplifier for composite video signals. The 101 L provides controls to compensate for signal loss inherent in long cable...
Input    1 Composite Video on A Bnc Connector, 1vpp/75Ω
Output    1 Composite Video on A Bnc Connector, 1vpp/75Ω
Max. Output Level    2.5vpp
Bandwidth    500mhz
Diff. Gain    0.03%
vm-92.jpg
Kramer: vm-92

9 Channel Multi-Mode Video Distribution Amplifier

The VM-92 is a high-performance multimode distribution amplifier for composite, s- Video (Y/C), component (YUV), and RGBS video signals. The VM-92 can also be...

Inputs    9 Independent Channels 1vpp/75Ω on Bnc Connectors
Outputs    9x2 Independent Channels 1vpp/75Ω on Bnc Connectors; 9 Loops (1 Per Channel) 1vpp/75Ω on Bnc Connectors
Max. Output Level    3.3vpp
Bandwidth (-3db)    500mhz
Diff. Gain    0.03%
pt-102vn.jpg
Kramer: pt-102vn

1:2 Composite Video Distribution Amplifier

The PT102VN is a distribution amplifier for composite video or SDI signals. The PT 102VN takes one input, provides correct buffering and isolation and distributes...

Inputs    1 Video, 1Vpp/75Ω on A BNC Connector
Outputs    2 Video, 1Vpp/75Ω on BNC
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    430MHz
Diff. Gain    0.05%
pt-103v.jpg
Kramer: pt-103v

1:3 Composite Video Distribution Amplifier

The PT103V is a composite video distribution amplifier. The PT 103V takes one input, provides correct buffering and isolation and distributes the signal to three...

Input    1 Video, 1Vpp/75Ω on an RCA Connector
Outputs    3 Video, 1Vpp/75Ω on RCA Connectors
Max. Output Level    1.9Vpp
Bandwidth (-3dB)    407MHz
Diff. Gain    0.04%
vm-3vn.jpg
Kramer: vm-3vn

1:3 Composite Video Distribution Amplifier

The VM-3VN is a distribution amplifier for composite video signals. The VM-3VN takes one input, provides correct buffering and isolation and distributes the...

Input    1 Composite Video on A BNC Connector
Outputs    3 Composite Video on BNC Connectors
Max. Output Level    1.8Vpp
Bandwidth (-3dB)    430MHz
Diff Gain    0.12%
123vxl.jpg
Kramer: 123vxl

1:3 Composite Video Differential Line Amplifier

The 123-Vxl is a high-performance line amplifier for composite or SDI video signals. The 123 Vxl includes controls and circuitry to compensate for signal losses...

Input    1 Looping Video, Differential, 1Vpp/75Ω on A BNC Connector
Outputs    3 Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    1.7Vpp
Bandwidth (-3dB)    425MHz
Diff. Gain    0.5%
104ln.jpg
Kramer: 104ln

1:4 Composite Video Differential Line Amplifier

The 104-LN is a high-performance line amplifier for composite or SDI video signals. The 104 LN includes differential circuitry to help eliminate noise often found...

Input    1 Video, Differential, 1Vpp/75Ω, on A BNC Connector
Outputs    4 Composite Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    1.6Vpp
Bandwidth (-3dB)    423MHz
Diff. Gain    0.22%
105v.jpg
Kramer: 105v

1:5 Composite Video Distribution Amplifier

The 105-V is a high-performance distribution amplifier for composite video signals. The 105 V takes one input, provides correct buffering and isolation and...

Input    1 Video, 1Vpp/75Ω on an RCA Connector
Outputs    5 Video, 1Vpp/75Ω on RCA Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    400MHz
Diff. Gain    0.1%
105vb.jpg
Kramer: 105vb

1:5 Composite Video Distribution Amplifier

The 105-VB is a high-performance distribution amplifier for composite video signals. The 105 VB takes one input, provides correct buffering and isolation and...

Input    1 Composite Video, 1Vpp/75Ω on A BNC Connector
Outputs    5 Composite Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    400MHz
Diff. Gain    0.1%
vm-50v.jpg
Kramer: vm-50v

1:5 Composite Video Distribution Amplifier

The VM-50V is a high-performance distribution amplifier for composite or SDI signals. The VM 50V takes one input, provides correct buffering and isolation, and...

Input    1 Video, Looping, 1Vpp/75Ω on BNC Connectors With A Termination Switch
Outputs    5 Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    480MHz
Diff. Gain    0.05%
vm-51.jpg
Kramer: vm-51

1:5 Composite Video Distribution Amplifier

The VM-51 is a high-performance distribution amplifier for composite or SDI video signals. The VM 51 takes one input, provides correct buffering and isolation and...

Input    1 Video, 1Vpp/75Ω on A BNC Connector
Outputs    5 Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    2.3Vpp/75Ω
Bandwidth (-3dB)    420MHz
Diff. Gain    0.05%
vm-1045.jpg
Kramer: vm-1045

1:5 Component Video Distribution Amplifier

The VM1045 is a high-performance distribution amplifier for component video signals. The VM 1045 can be configured as a four 1:5 composite video, two 1:5 s-Video...

Inputs    4x1 Video Inputs, 1Vpp/75Ω on BNC Connectors with Loop
Outputs    4x5 Video Outputs, 1Vpp/75Ω on BNC Connectors
Max. Output Level    2.7Vpp
Bandwidth (-3dB)    415MHz
Diff. Gain    0.03%
vm-80v.jpg
Kramer: vm-80v

1:8 Composite Video Distribution Amplifier

The VM-80V is a high-performance distribution amplifier for composite or SDI signals. The VM 80V can also be configured as a 1:4 DA for s-Video (Y/C) signals and...

Inputs    2 Video: 1Vpp/75Ω on BNC Connectors With Termination Switches
Outputs    2x4 Video, 1Vpp/75Ω on BNC Connectors
Max. Output    2Vpp
Video Bandwidth (-3dB)    330MHz
Diff. Gain    0.12%
vm-1010.jpg
Kramer: vm-1010

1:10 Composite Video Distribution Amplifier
The VM1010 is a high-performance distribution amplifier for composite video. The VM 1010 can also be configured as a 1:5 distribution amplifier for s-Video (Y/C)...
Inputs    2 Composite/Component Video, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
Outputs    2x5 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    1.8Vpp
Video Bandwidth (-3dB)    235MHz
Diff. Gain    0.2%
vm-1021.jpg
Kramer: vm-1021

1:20 Composite Video Distribution Amplifier

The VM1021 is a high-performance distribution amplifier for composite or SDI video signals. The VM 1021 provides controls to compensate for signal losses inherent...

Input    1 Composite Video Or A Single Component, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
Outputs    20 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.1%
Diff. Phase    0.07deg
vm-25.jpg
Kramer: vm-25

1:25 Composite Video Distribution Amplifier

The VM25 is a high-performance distribution amplifier for composite video signals. The VM 25 takes one input, provides correct buffering and isolation, and...

Input    1 Composite Video, Looping on an RCA Connector
Outputs    25 Composite Video on RCA Connectors, 1 Loop on an RCA Connector
Max. Output Level    1.7Vpp
Bandwidth (-3dB)    430MHz
Diff. Gain    0.08%
vm-3sn.jpg
Kramer: vm-3sn

1:3 S-Video Distribution Amplifier

The VM-3SN is a high-performance distribution amplifier for s-Video (Y/C) signals. The VM 3SN takes one s-Video input and distributes the signal to three...

Input    1 composite video on a BNC connector
Outputs    3 composite video on BNC connectors
Max. Output Level    1.8Vpp
Bandwidth (-3dB)    135MHz
DIFF Gain    0.12%
vm-2c.jpg
Kramer: vm-2c

1:2 Component Video Distribution Amplifier

The VM-2C is a high-performance distribution amplifier for component Video (RGB/YUV) signals. The VM-2C takes one input, provides correct buffering and isolation...

Input    1 component video (Y, PB/CB, PR/CR, or Y, U, V) on RCA connectors, 1Vpp/75Ω
Outputs    2 component video (Y, PB/CB, PR/CR, or Y, U, V) on RCA connectors, 1Vpp/75Ω
Max. Output level    2.4Vpp
Bandwidth (-3dB)    510MHz
Diff. Gain    0.03%
vm-50ca.jpg
Kramer: vm-50ca

1:5 Component Video, S/PDIF & Stereo Audio Distribution Amplifier

The VM-50CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. The VM 50CA takes one input of...

Inputs    1 component video (Y, Pb/Cb, Pr/Cr); 1Vpp/0.7Vpp, 75Ω on 3 RCA connectors; 1 digital audio (S/PDIF) 75Ω on an RCA connector; 1 unbalanced stereo audio 50kΩ, 4dBu on 2 RCA connectors
Outputs    5 component video (Y, Pb/Cb, Pr/Cr) 1Vpp/0.7Vpp, 75Ω on 15 RCA connectors; 5 digital audio (S/PDIF) on 5 RCA connectors; 5 unbalanced stereo audio 150O, 4dBu on 10 RCA connectors
Max. Output Level    Video 2.3Vpp; Audio 1.8Vpp (S/PDIF); 22dBu (analog)
Bandwidth (-3dB)    Video 400MHz, Fully Loaded; Audio 350MHz (S/PDIF); 40kHz (analog)
Diff. Gain    0.08%
vm-100cb.jpg
Kramer: vm-100cb

1:10 Component Video Distribution Amplifier

The VM-100CB is a high-performance distribution amplifier for component video signals. The VM-100CB takes one input, provides correct buffering and isolation, and...

Input    1 component video (Y, Pb/Cb, Pr/Cr), looping on BNC connectors
Outputs    10 component video (Y, Pb/Cb, Pr/Cr) on BNC connectors
Max. Output level    2.2Vpp
Bandwidth (-3dB)    450MHz
Diff. Gain    0.03%
vp-123.jpg
Kramer: vp-123

1:3 RGBHV Computer Graphics Video Distribution Amplifier

The VP-123 is a high-performance amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP 123 takes one...

Input    1x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors; H Sync and V Sync, TTLlevel
Output    3x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors 3 x H Sync, V Sync TTL level on BNC connectors
Bandwidth (-3dB)    450MHz
Max. Output Level    2.1Vpp/75Ω (R, G, B)
Diff. Gain    0.13%
vp-123v.jpg
Kramer: vp-123v

1:3 RGBHV Computer Graphics Video Distribution Amplifier

The VP-123V is a high-performance amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP 123V takes one...

Input    1x3 component/RGB/composite video, 1Vpp/75Ω on a 15-pin HD (F) connector; H Sync and V Sync, TTL level
Output    3x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors 3 x H Sync, V Sync TTL level on BNC connectors
Bandwidth (-3dB)    450MHz
Max. Output Level    2.1Vpp/75Ω (R, G, B)
Diff. Gain    0.13%
vm-1055.jpg
Kramer: vm-1055

1:5 RGBHV Video Distribution Amplifier

The VM1055 is a high-performance distribution amplifier for RGBHV video signals. The VM 1055 provides correct buffering and isolation and distributes the signal...

Inputs    1x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors, (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
Outputs    5x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    300MHz
Diff. Gain    0.1%
vp-10.jpg
Kramer: vp-10

1:10 RGBHV Video Distribution Amplifier

The VP10 is a high-performance distribution amplifier for RGBHV video signals. The VP10 provides correct buffering and isolation and distributes the signal to all...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
tp133.jpg
Kramer: tp-133

VGA/A/DATA TP Transmitter

The TP−133 is a high−performance, extended range twisted pair transmitter for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
tp126xl.jpg
Kramer: tp-126xl

XGA Twisted Pair Receiver

The TP−126xl is an extended range twisted pair receiver for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. The unit...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
tp125xl.jpg
Kramer: tp-125xl

XGA Twisted Pair Transmitter

The TP−125xl is an extended range twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. It...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
tp122xl.jpg
Kramer: tp-122xl

VGA/A Twisted Pair Receiver

The TP−122xl is a high−performance twisted pair receiver for computer graphics video and unbalanced stereo audio signals. It converts the twisted pair input signal to...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
tp-122xl.jpg
Kramer: tp-122n

XGA & Audio TPair Receiver

The TP−122N is a twisted pair receiver for computer graphics video, unbalanced stereo and S/PDIF audio signals. The unit receives a twisted pair signal from the...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
vm-5hdxln.jpg
Kramer: vm-5hdxln

1:5 3G HD-SDI DA

The VM−5HDxln is a high−performance distribution amplifier for 3G HD−SDI signals. The unit takes one input, provides reclocking and equalization, and distributes...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
vm-2dh.jpg
Kramer: vm-2dh

DP to DVI/HDMI Converter

The VM−2DH is a converter for DisplayPort signals. The unit inputs a DisplayPort signal that it converts to HDMI and DVI

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
vp-2l.jpg
Kramer: vp-2l

1:1 Computer Graphics Video Line Amplifier

The VP2L is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP2L provides controls to...

Input    1 UXGA on a 15-pin HD (F) connector
Output    1 UXGA on a 15-pin HD (F) connector
Max. Output level    1.5Vpp
Resolution    Up to UXGA
Diff. Gain    2.7%
vp-111k.jpg
Kramer: vp-111k

1:1 Computer Graphics Video Line Amplifier

The VP-111K is a high-performance line driver for signals exceeding UXGA. The VP 111K provides controls to compensate for signal losses inherent in long cable...

Input    1 XGA, looping on a 15-pin HD connector
Outputs    1 XGA on a 15-pin HD connector
Max Output Level    2.2Vpp
Bandwidth (-3dB)    500MHz
Diff. Gain    0.05%
vp-2k.jpg
Kramer: vp-2k

1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier

The VP2K is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The...

Inputs    Video 1 UXGA on a 15-pin HD (F) connector; Audio 1 audio stereo on RCA connectors
Outputs    Video 2 UXGA on 15-pin HD (F) connectors; Audio 2 audio stereo on RCA connectors
Max. Output Level    Video 2.2Vpp; Audio 6.8Vpp
Bandwidth (–3dB)    Video 380MHz; Audio >100kHz
Diff. Gain    0.03%
vp-32k.jpg
Kramer: vp-32k

3x1:2 Computer Graphics Video & Stereo Audio Switcher

The VP32K is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA, and balanced stereo audio. The VP 32K...

Inputs    3 UXGA on 15-pin HD connectors; 3 balanced stereo audio 10kΩ on 5-pin terminal block connectors
Outputs    2 UXGA on 15-pin HD connectors; 2 balanced stereo audio on 5-pin terminal block connectors
Max. Output level    Video 2.3Vpp; Audio 6.8Vpp
Bandwidth (-3dB)    Video 420MHz; Audio >100kHz
Diff. Gain    0.03%
vp-200dxl.jpg
Kramer: vp-200dxl

1:2 Computer Graphics Video Differential Line Amplifier

The VP-200Dxl is a high-performance differential line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP...

Input    Analog red, green, blue signals - 0.7Vpp/75Ω, H & V sync, TTL level, on a 15-pin HD (F) connector
Outputs    2 analog red, green, blue signals - 0.7Vpp/75Ω, H & V syncs, TTL level, on 15-pin HD (F) connectors
Bandwidth (-3dB)    400MHz
Diff. Gain    0.17%
Diff. Phase    0.1Deg
vp-200ak.jpg
Kramer: vp-200ak

1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier

The VP-200AK is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and stereo audio signals. The VP...

Inputs    1 XGA on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini jack
Outputs    2 UXGA on 15-pin HD (F) connectors; 2 unbalanced stereo audio on 3.5mm mini jacks; 2 balanced stereo audio on detachable 5-pin terminal blocks
Max. Output Level    Video 2.0Vpp; Audio 7.2Vpp
Bandwidth (-3dB)    Video 510MHz; Audio >100kHz
Diff. Gain    0.55%
vp-200xln.jpg
Kramer: vp-200xln

1:2 Computer Graphics Video Line & Distribution Amplifier

The VP200xln is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP200xln...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    2 XGA on 15-pin HD (F) connectors
Max. Output level    2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.05%
tp-202.jpg
Kramer: tp-202

Computer Graphics Video Over Twisted Pair Branching Receiver

The TP-202 is a twisted pair branching receiver for computer graphics video signals with resolutions from VGA up to UXGA and higher or HDTV signals. The TP 202...

Input    1 CAT 5 on an RJ-45 connector
Output    1 CAT 5 on an RJ-45 connector; 2 XGA on 15-pin HD (F) connectors
Diff. Gain (PAIR)    2.8%
K-Factor    0.1%
Max. Resolution    WUXGA & 1080p
tp-210.jpg
Kramer: tp-210

1:10 Computer Graphics Video Over Twisted Pair Transmitter With Dual 15-pin HD Outputs

The TP-210 is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The TP 210...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    2 XGA on 15-pin HD (F) connectors; 10 CAT 5 on RJ-45 connectors
Max. Output level    1.9Vpp/1.6Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 2.5% (CAT 5)
vp-300thd.jpg
Kramer: vp-300thd

1:2 Computer Graphics Video & HDTV Distribution Amplifier & Twisted Pair Transmitter

The VP-300THD is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher as well as HDTV. The...

Input    1 XGA on a 15-pin HD connector
Outputs    2 XGA on 15-pin HD connectors; 1 twisted pair on an RJ-45 connector
Max. Output level    2.3Vpp (XGA), 1.4Vpp (CAT 5)
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 2.6% (CAT 5)
vp-222k.jpg
Kramer: vp-222k

2x1:2 Computer Graphics Video Switcher

The VP222K is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. The VP 222K switches one of two inputs to...

Inputs    2 UXGA on 15-pin HD connectors
Outputs    2 UXGA on 15-pin HD connectors
Video Bandwidth (-3db)    415mhz
Diff. Gain    <0.02%
Diff. Phase    <0.02Deg
tp-210a.jpg
Kramer: tp-210a

1:10 Computer Graphics Video, Audio & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-210A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals and stereo or S/PDIF audio signals. The...

Inputs    1 UXGA video on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 RS-232 with 1 RxD line on a terminal block connector
Outputs    10 twisted pairs on RJ-45 connectors, 2 UXGA on 15-pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini jacks, 2 S/PDIF on RCA connectors, 2 RS-232 with 2 TxD lines on terminal block connectors
Max. Output Level    Video 1.6V; Audio 2.3V
Power Outputs    12V DC 0.5A max via each RJ-45 output (PINs 4, 5)
Max. Resolution    UXGA & 1080p
vp-3xl.jpg
Kramer: vp-3xl

1:3 Computer Graphics Video Distribution Amplifier

The VP3xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP3xl...

Input    1 VGA/UXGA input on a 15-pin HD (F) connector
Output    3 VGA/UXGA on 15-pin HD (F) connectors
Bandwidth (-3dB)    375MHz
Max. Output Level    1.9Vpp
Diff. Gain    0.12%
vp-300k.jpg
Kramer: vp-300k

1:3 Computer Graphics Video Distribution Amplifier

The VP-300K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The VP-300K takes one input, provides correct...

Input    1 UXGA on an 15-pin HD connector
Outputs    3 UXGA on 15-pin HD connectors
max. output level    2.2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.03%
vp-4xl.jpg
Kramer: vp-4xl

1:4 Computer Graphics Video Distribution Amplifier

The VP4xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP4xl...

Input    1 VGA/UXGA input on a 15-pin HD (F) connector
Output    4 VGA/UXGA on 15-pin HD (F) connectors
Bandwidth (-3dB)    375MHz
Max. Output level    1.9Vpp
Diff. Gain    0.12%
vp-400k.jpg
Kramer: vp-400k

1:4 Computer Graphics Video Distribution Amplifier

The VP-400K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The VP 400K takes one input, provides correct...

Input    1 UXGA on an 15-pin HD connector
Outputs    4 UXGA on 15-pin HD connectors
Max. Output Level    2.2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.03%
vp-5r.jpg
Kramer: vp-5r

1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier

The VP5R is a high-performance distribution amplifier for computer graphics video signals on a twisted pair cable. The VP5R takes one twisted pair input and...

Input    1 RJ-45 connector
Outputs    5 XGA on 15-pin HD connectors
Bandwidth (-3dB)    445MHz
Max. Output level    1.4Vpp
Max. Resolution    WUXGA & 1080p
vp-5xl.jpg
Kramer: vp-5xl

1:5 Computer Graphics Video Distribution Amplifier

The VP5xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP5xl...

Input    1 VGA/UXGA input on a 15-pin HD (F) connector
Output    5 VGA/UXGA on 15-pin HD (F) connectors
Bandwidth (-3dB)    375MHz
Max. Output Level    1.9Vpp
Diff. Gain    0.12%
vp-6a.jpg
Kramer: vp-6a

1:6 Computer Graphics Video & Audio Distribution Amplifier With Twisted Pair Transmitter

The VP6A is a high-performance computer graphics video distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA with balanced or...

Inputs    Video 1 XGA on a 15-pin HD (F) connector; Audio 1 unbalanced stereo audio on a 3.5mm mini jack; 1 balanced stereo audio on a 5-pin terminal block connector
Outputs    Video 6 XGA on 15-pin HD (F) connectors; 1 RJ-45 connector; Audio 6 unbalanced stereo audio on 3.5mm mini jacks; 6 balanced stereo audio on 5-pin terminal block connectors
Max. Output Level    Video 1.7Vpp; Audio 26Vpp
Bandwidth (-3dB)    Video 500MHz (15-pin HD); Audio >100kHz
Diff. Gain    0.09%
vp-6xln.jpg
Kramer: vp-6xln

1:6 Computer Graphics Video Distribution Amplifier

The VP6xlN is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP6xlN takes one input,...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    6 XGA on 15-pin HD (F) connectors
Max. Output level    1.7Vpp
Bandwidth    500MHz
Diff. Gain    0.09%
vp-8k.jpg
Kramer: vp-8k

1:8 Computer Graphincs Video Distribution Amplifier

The VP8K is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP8K takes one input,...

Input    1 VGA/UXGA on a 15-pin HD (F) connector
Outputs    8 VGA/UXGA on 15-pin HD (F) connectors
Max. Output level    2.2Vpp
Bandwidth (–3dB)    370MHz
Diff. Gain    0.05%
vp-108.jpg
Kramer: vp-108

1:8 Computer Graphics Video & Balanced Stereo Audio Distribution Amplifier

The VP-108 is a high-performance computer graphics video amplifier for computer graphics signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. The...

Inputs    1 XGA input, looping, on 15-pin HD (F) connectors; 1 balanced audio 4dBu 100kΩ on detachable terminal block connectors
Outputs    8 XGA on 15-pin HD (F) connectors; 8 balanced audio 4dBu/50O on detachable terminal block connectors
Max. Output Level    Video 1.5Vpp, Audio 25Vpp
Bandwidth (-3dB)    Video 400MHz, Audio 100kHz
Diff. Gain    0.03%
vp-12nhd.jpg
Kramer: vp-12nhd

1:12 Computer Graphics Video & HDTV Distribution Amplifier With 3 Twisted Pair Transmitters

The VP12NHD is a high-performance distribution amplifier for computer graphics video signals. The VP12NHD takes one input, provides correct buffering and...

Input    1 UXGA on a 15-pin HD (F) connector
Outputs    12 UXGA on 15-pin HD (F) connectors; 3 RJ-45 OUT connectors
Max. Output level    1.7Vpp
Bandwidth (-3dB)    330MHz (UXGA)
Max. Resolution    Up to UXGA
tp-102hd.jpg
Kramer: tp-102hd

Computer Graphics Video & HDTV Over Twisted Pair Transmitter

The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 102HD converts a computer graphics video or HDTV signal on a...

Input    1 XGA/HD on a 15-pin HD (F) connector
Outputs    2 RJ-45 connectors
Max. Output Level    1.7Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.75%
tp-104hd.jpg
Kramer: tp-104hd

1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-104HD is a twisted pair transmitter for computer graphics signals. The TP 104HD converts a computer graphics video signal into four twisted pair...

Input    1 VGA/UXGA on a 15-pin HD connector
Outputs    4 RJ-45 OUT connectors
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    3.2%
tp-105hd.jpg
Kramer: tp-105hd

1:2 Twisted Pair Line Driver & Distribution Amplifier

The TP-105HD is a line driver and distribution amplifier for analog video over twisted pair signals. The TP 105HD takes a twisted pair input and distributes it to...

Input    1 RJ-45 connector
Outputs    2 RJ-45 connectors
Max Output Level    1.6Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain (PAIR)    1.2%
tp-112hd.jpg
Kramer: tp-112hd

1:2 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-112HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 112HD converts a computer graphics video or HDTV signal on a...

Input    1 XGA/HD on a 15-pin HD (F) connector
Outputs    2 twisted pair on RJ-45 connectors
Max. Output Level    1.7Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    4%
tp-114.jpg
Kramer: tp-114

1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-114 is a high-performance distribution amplifier for computer graphics video or HDTV signals. The TP 114 converts a computer graphics video or HDTV signal...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    1 XGA on a 15-pin HD (F) connector; 4 twisted pair on RJ-45 OUT connectors
Max. Output Level    1.8Vpp (XGA), 1.6Vpp (CAT 5)
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 7% (CAT 5)
tp-205a.jpg
Kramer: tp-205a

1:5 Computer Graphics Video, Audio, & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-205A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals, and stereo or S/PDIF audio signals. The...

Input    Computer graphics video and looping computer graphics video on 15-pin HD connectors, unbalanced stereo audio on a 3.5mm mini jack, S/PDIF on an RCA connector, RS-232 on a terminal block connector
Outputs    5 RJ-45 connectors
Max. Output Level    Video: 1V; Audio: 2.3V
Max. Resolution    WUXGA & 1080p
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-305a.jpg
Kramer: tp-305a

1:5 Computer Graphics Video, Audio & RS-232 Twisted Pair Receiver & Distribution Amplifier

The TP-305A is a high-performance twisted pair receiver for computer graphics video, audio and RS-232 signals. The TP 305A takes one twisted pair input and...

Input    1 LINE IN on an RJ-45 connector
Outputs    5 LINE OUT on RJ-45 connectors; 1 UXGA video output on a 15-pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 S/PDIF output on an RCA connector; 1 RS-232 on a 2-pin terminal block connector
Max. Output Level    Video: 1.6V; Audio: 2.3V
Power Outputs    12V DC, 0.5A max via each RJ-45 output (pins 4, 5)
Max. Resolution    WUXGA & 1080p
pt-102an.jpg
Kramer: pt-102an

1:2 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

Input    1 unbalanced stereo audio on a 3.5mm mini jack
Outputs    2 unbalanced stereo audio on 3.5mm mini jacks
Max. Output Level    5Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    85dB @1kHz
vm-3an.jpg
Kramer: vm-3an

1:3 Balanced Stereo Audio Distribution Amplifier

The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The VM-3AN takes one stereo input and distributes the signal to three...

Input    1 balanced audio stereo on 5-pin terminal block
Outputs    3 balanced audio stereo on 5-pin terminal blocks
Max. Output Level    Audio: 18.5Vpp
Bandwidth (-3dB)    >100 kHz
S/N Ratio    90dB @1kHz
4x4a.jpg
Kramer: 4x4a

4x1:4 Stereo Audio Switcher
The 4x4-A is a high-performance switcher for stereo audio signals. The 4x4 A switches any one of four input signals simultaneously to four identical outputs.
Inputs    4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks
Outputs    4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks
Max Output Level    5.2Vpp ( 7dBu)
Audio Bandwidth (-3dB)    100kHz
S/N Ratio    90dB
105a.jpg
Kramer: 105a

1:5 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

Input    1 unbalanced stereo/balanced mono, 1Vpp/33k#8486; on a 3.5mm mini jack
Outputs    5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks
Max. Output    5Vpp
Audio Bandwidth (-3dB)    20kHz
S/N Ratio    80dB unweighted
vm-50an.jpg
Kramer: vm-50an

1:5 Balanced & Unbalanced Stereo Audio Distribution Amplifier

The VM-50AN is a high-performance distribution amplifier for balanced and unbalanced stereo audio signals. The VM 50AN takes one balanced or unbalanced stereo...

Inputs    1 balanced stereo audio, 4dBu/50kΩ on a detachable terminal block connector; 1 unbalanced stereo audio, 1Vpp/50kΩ on a 3.5mm mini jack. Balanced/Unbalanced input selection
Output    5 balanced stereo audio, 4dBu/50Ω on detachable terminal block connectors; 5 unbalanced stereo audio, 1Vpp/470Ω on 3.5mm mini jacks
Max. Output Level    >24dBm
Bandwidth (-3dB)    40kHz; fully loaded
S/N Ratio    84dB, unweighted
vm-80a.jpg
Kramer: vm-80a

1:8 Balanced Stereo Audio Distribution Amplifier

The VM-80A is a high-performance distribution amplifier for balanced stereo audio signals. The VM 80A can also be configured as two 1: 4 DAs.

Inputs    2 balanced stereo audio 4dBu, 100kΩ on terminal block connectors
Outputs    8 (or 2 x 4) balanced stereo audio, 4dBu, 50Ω on terminal block connectors
Max. Audio output    20Vpp
Audio Bandwidth (-3dB)    20kHz
Gain Range    0.2 to 5.8dB (4 trimmers, 2 for each input channel)
vm-1110xl.jpg
Kramer: vm-1110xl

1:10 Balanced Mono Audio Distribution Amplifier

The VM1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1110xl can also be configured as a 1: 5...

Inputs    2 balanced stereo audio 4dBu/50kΩ on XLR (F) connectors
Outputs    10 balanced stereo audio 4dBu/50Ω on XLR (M) connectors
Max. Output Level    23.8Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    89.3dB
vm-1120.jpg
Kramer: vm-1120

1:10 Balanced Stereo Audio Distribution Amplifier

The VM1120 is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1120 can also be configured as a 1:20...

Inputs    2 balanced stereo or 4 balanced mono audio 4dBu/50kΩ on XLR (F) connectors
Outputs    10 balanced stereo or 20 balanced mono audio 4dBu/50Ω on XLR (M) connectors
Max. Output Level    23.8Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    89.3dB
vm-1610.jpg
Kramer: vm-1610

1:10 Balanced Stereo Audio Distribution Amplifier

The VM1610 is a high-performance distribution amplifier for balanced stereo signals. The VM 1610 can also be configured as two 1:5 balanced stereo audio...

Inputs    2 balanced stereo audio 4dBu, 50kΩ on detachable terminal blocks
Outputs    10 (or 2x5) balanced stereo audio 4dBu, 50Ω on detachable terminal blocks
Audio Bandwidth (-3dB)    >100kHz
Max. Audio Output    18Vpp
Gain Range    0.5dB to 9.5dB (4 trimmers, 2 for each input channel)
106.jpg
Kramer: 106

1:2 Microphone Line & Distribution Amplifier

The 106 is a high-quality distribution amplifier for balanced mono microphone signals. The 106 takes one dynamic or condenser microphone input and distributes the...

input    1 balanced mono microphone on a 3-pin terminal block connector
Outputs    2 balanced mono line outputs on 3-pin terminal block connectors
Max. Output Level    27Vpp (22dBu)
Bandwidth    >40kHz
S/N Ratio    81dB
104r.jpg
Kramer: 104r

1:4 RF Distribution Amplifier

The 104-R is a high-performance distribution amplifier for RF signals. The 104 R takes one RF (CATV/MATV) signal and distributes it to four identical outputs.

Input    1 RF, 0.5Vpp/75Ω (max.) on an "F" type connector
Outputs    4 RF, 0.5Vpp/75Ω (max.) on "F" type connectors
Bandwidth    40MHz to 3000MHz ( /-3dB)
Coupling    AC
RF Gain    6dB typical across band
vm-2hdcpxl.jpg
Kramer: vm-2hdcpxl

1:2 DVI Distribution Amplifier

The VM-2HDCPxl is an HDCP compliant distribution amplifier for DVI-D signals with resolutions up to and including WUXGA and 1080p. The VM-2HDCPxl reclocks and...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Outputs    2 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
Compliance with Standards    Supports DVI 1.1 and HDCP
Max. Resolution    Up to WUXGA (1920x1200), 1080p
Bandwidth    2.25Gbps
vm-12hdcp.jpg
Kramer: vm-12hdcp

1:12 HDCP Compliant DVI Distribution Amplifier

The VM12HDCP is an HDCP-compliant distribution amplifier for DVI-D signals with resolution up to 1080p or UXGA. The VM 12HDCP reclocks and equalizes the signal...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
Outputs    12 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
Bandwidth    1.65Gbps
Controls    SELECT and READ buttons for selecting and storing EDID information
Power Source    100-240V AC, 50/60Hz, 11VA
vm-2hd.jpg
Kramer: vm-2hd

1:2 HD-SDI Video Distribution Amplifier

The VM-2HD is a high-performance distribution amplifier for HD-SDI signals. The VM-2HD takes one input, provides reclocking and equalization and distributes the...

Input    1 SMPTE-259M/292M/344M SDI, 75Ω on a BNC connector
Outputs    2 equalized and reclocked SMPTE-259M/292M/344M outputs 75Ω on BNC connectors
Maximum Data Rate    1.485Gbps
Max. Output Level    800mVpp/75Ω
Coupling    AC
vm-2hdxl.jpg
Kramer: vm-2hdxl

1:2 3G HD-SDI Distribution Amplifier

The VM-2HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM-2HDxl takes one input, provides reclocking and equalization and...

Input    1 SMPTE-259M/292M/344M/424M serial video, 75Ω on a BNC connector
Outputs    2 equalized and reclocked SMPTE-259M/292M/344M/424M outputs 75Ω on BNC connectors
Maximum Data Rate    2.97Gbps
Max. Output Level    800mVpp/75Ω
Coupling    AC
vm-22hd.jpg
Kramer: vm-22hd

Dual-Mode 1:2 HD-SDI Distribution Amplifier

The VM22HD is a high-performance distribution amplifier for HD-SDI and dual link HD-SDI signals. The VM 22HD can be configured as two 1:2 distribution amplifier,...

Inputs    2 SMPTE-259M, 344M, 292M, 372M serial video, 75Ω on a BNC connector
Ouptuts    4 equalized and reclocked SMPTE-259M, 344M, 292M, 372M outputs, 75Ω on BNC connectors
Max. Output Level    800mVpp/75Ω
Max. Baud Rate    1.485Gbps
Power Source    12VDC, 250mA
vm-4hdxl.jpg
Kramer: vm-4hdxl

1:4 3G HD-SDI Video Distribution Amplifier

The VM-4HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 4HDxl takes one input, provides reclocking and equalization and...

Input    1 SMPTE-259M/292M/344M/424M serial video 75Ω on a BNC connector
Outputs    4 equalized and reclocked SMPTE-259M/292M/344M/424M outputs 75Ω on BNC
Maximum Data Rate    2.97Gbps
Max. Output Level    800mVpp/75Ω
Coupling    AC
rc-63al.jpg
Kramer: rc-63al

6-Button Room Controller With Analog Volume Knob & LCD Group Labels

The RC63AL is a 6-button room controller with an analog volume knob for multimedia rooms. The RC 63AL functions either as a standalone controller or as part of...

Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1
Source   
Fuse    500mA, FSMD 2920
Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
rc-63dl.jpg
Kramer: rc-63dl

6-Button Room Controller With Digital Volume Knob & LCD Group Labels

The RC63DL is a 6-button room controller with a digital volume knob for multimedia rooms. The RC 63DL is part of the SummitView ™ system to control audio...

Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
Power Source    12V DC, 140mA
Fuse    500mA, FSMD 2920
Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
rc-2.jpg
Kramer: rc-2

Wall Plate - RS-232 Controller

The RC2 is a 2-button controller that sends a series of RS-232 commands with the push of a button. The RC 2 operates serial devices such as projectors, displays &...

Ports    1 RS-232 on a terminal block connector
Power Source    12V DC, 40mA
Dimensions    7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
Accessories    Power supply
rc-2c.jpg
Kramer: rc-2c

Wall Plate - RS-232 & IR Controller

The RC2C is a 2-button controller that sends a series of RS-232 or IR commands with the push of a button. The RC 2C operates serial or IR-controlled devices such...

Ports    1 RS-232 on a terminal block connector; IR OUT on a terminal block connector
Power Source    12V DC, 40mA
Dimensions    7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
Accessories    Power supply
rc-6ir.jpg
Kramer: rc-6ir

6-Button Universal Room Controller With IR Learning

The RC6iR is a 6-button room controller for multimedia rooms. The RC 6iR controls audio components, video components, and other room facilities such as lights and...

Ports    2 RS-232 on terminal block connectors; 1 RS-485 on terminal block connectors; 1 Ethernet RJ-45 port
Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 2 IR emitters on terminal block connectors
Power Source    12V DC, 155mA
Dimensions    6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H
Weight    0.3kg (0.67lbs) approx
fc-10eth.jpg
Kramer: fc-10eth

RS-232/RS-485 To Ethernet Converter

The FC10ETH is a bi-directional RS-232 or RS-485 to Ethernet control signal converter. The FC-10ETH allows two RS-232 (or one RS-232 and one RS-485) controllable...

Ethernet Interface    10/100BaseT Ethernet
Serial Interfaces    2 RS-232 connectors, signals: RX, TX, RTS, CTS, ground on 9-pin D-sub (M) ports; 1 RS-485 on a detachable terminal block connector
Network Protocols    ICMP, ARP (ping), TCP, UDP
Power Source    12V DC, <80mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
vp-43xl.jpg
Kramer: vp-43xl

RS-232/RS-485/RS-422 Format Converter

The VP43xl is a bi-directional converter between RS-232, RS-485, and RS-422 formats. Input data into the VP 43xl, any format, is converted to the other two...

Input/Output    RS-232 IN on 9-pin D-sub (F), RS-232 OUT on 9-pin D-sub (M) compliant to TIA/EIA-232-F. RS-485 on 3 wires detachable terminal block compliant to TIA/EIA-485-A. RS-422 on 9-pin D-sub (F) compliant to TIA/EIA-422-B
Baud Rates    1200, 2400, 9600, 19200, 38400
Format    1 start bit, 8 data bits, 1 stop bit
Display    Power ON LED
Power Source    12V DC, 80mA
401c.jpg
Kramer: 401c

S-Video To Composite Video Format Converter

The 401-C is a high-performance format converter for s-Video (Y/C) signals. The 401 C converts an s-Video input to two composite and two s-Video (Y/C) outputs...

Input    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
Outputs    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors
Max. Output Level    1.4Vpp
Video Bandwidth (-3dB)    160MHz (Y)
Non-Linearity    0.05%
401dn.jpg
Kramer: 401dn

Composite Video To S-Video Format Converter

The 401-DN is a high-performance format converter for composite video signals. The 401 DN converts a composite video input to an s-Video (Y/C)

Input    1 composite video, 1Vpp/75Ω on a BNC connector
Output    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
Video Bandwidth    3.5MHz
Diff. Gain    0.8%
Diff. Phase    0.1Deg
7408.jpg
Kramer: 7408

SDI To Multi-Format Analog Video Format Converter & Processor

The 7408 is a format converter for SDI (SMPTE 259M) signals. It converts an SDI video signal to composite video and s-Video (Y/C), or component (YUV)

Input    1 SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector
Outputs    1 reclocked SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector; 1 composite video: 1Vpp/75Ω on a BNC connector; 1 s-Video: 1Vpp, 0.3Vpp/75Ω on two BNC connectors;1 component video (Y, U and V) on three BNC connectors
Bandwidth (-3dB)    5.7MHz
Diff. Gain    <1%
Diff. Phase    <1Deg
7508.jpg
Kramer: 7508

Multi-Standard Composite Video & S-Video To SDI Format Converter

The 7508 is a multi-format converter for composite video or s-Video (Y/C) signals. It converts either PAL, SECAM, and NTSC composite or s-Video (Y/C) signals into two SDI video...

Input    1 composite video, 1Vpp/75Ω on a BNC connector; 1 s-Video, 1Vpp, 0.3Vpp/75Ω on a 4-pin connector
Output    2 SDI SMPTE-259M, ITU-R BT.601 on BNC connectors
Digital Resolution    10 bits
Bandwidth    5MHz (-0.2dB)
Signal to Noise Ratio    57dB
fc-400.jpg
Kramer: fc-400

Time Base Corrector, Synchronizer & Format Converter

The FC400 is a TBC and synchronizer for composite and s-Video (Y/C) signals. The FC 400 corrects timing errors and outputs both composite and s-Video signals...

Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4- pin connector
Video Standards    NTSC (3.58) or PAL-B (DIP-switch selectable). No standards conversion
Digital Resolution    10 bits
Bandwidth (-0.5dB)    5MHz
fc4002.jpg
Kramer: fc-4002

Analog Video Transcoder

The FC−4002 is a high−performance broadcast quality, universal video transcoder for analog video signals. It converts a composite video, s−Video (Y/C) or component...

Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4- pin connector
Video Standards    NTSC (3.58) or PAL-B (DIP-switch selectable). No standards conversion
Digital Resolution    10 bits
Bandwidth (-0.5dB)    5MHz
vm-1h4c.jpg
Kramer: vm-1h4c

1:4 HDMI TP Trans & DA

The VM−1H4C is a high−quality twisted pair distribution amplifier for HDMI signals. The unit receives serial commands and IR signals transparently via the RS−232...

Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4- pin connector
Video Standards    NTSC (3.58) or PAL-B (DIP-switch selectable). No standards conversion
Digital Resolution    10 bits
Bandwidth (-0.5dB)    5MHz
fc-7402.jpg
Kramer: fc-7402

SDI To Multi-Format Analog Video Format Converter & Processor

The FC7402 is a format converter for SDI (SMPTE 259M) signals. The FC 7402 converts an SDI video signal to composite video, s-Video (Y/C), and RGB/component (RGsB...

Input    1 SDI: SMPTE 259M, ITU-R BT.601 (CCIR-601), 75Ω on a BNC connector
Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (luma), 0.3Vpp/75Ω (chroma) on a 4-pin connector; 1 component: RGB/Y, R-Y, B-Y (1V, 0.7V, 0.7V/75Ω) on BNC connectors; 1 SDI (reclocked): SMPTE 259M, ITU-R BT.601 (CCIR-601) 75Ω on a BNC connector
Resolution    10-bit
Bandwidth (-3dB)    5.7MHz
Non-Linearity    /-1.0%
fc-7501.jpg
Kramer: fc-7501

Multi-Standard Composite Video, S-Video & Component Video To SDI Format Converter

The FC-7501 is a format converter for composite video, s-Video or component video (YUV) signals. The FC7 501 converts either PAL, SECAM, and NTSC composite video,...

Input    1 composite video: 1Vpp/75Ω (Y) looping on BNC connectors with a termination switch; 1 (B-Y): 0.7Vpp/75Ω looping on BNC connectors with a termination switch; 1 (R-Y)/C 0.7Vpp/0.3Vpp/75Ω looping on BNC connectors with a termination switch
Outputs    2 SDI on BNC connectors
Video Standards    CV, Y/C: NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L)
Bandwidth (-3dB)    6MHz
Resolution    10 bits
fc-32.jpg
Kramer: fc-32

DVI To Computer Graphics/Component/HDTV Video Format Converter

The FC32 is a high-performance format converter for DVI-D signals. The FC 32 converts (without scaling) a DVI-D input to a computer graphics or component video...

Input    1 DVI-D, 1.2Vpp on a Molex 24-pin (F) connector, DDC signal 5Vpp (TTL)
Outputs    1 VGA or YPbPr on a 15-pin HD (F) connector; YPbPr is with bi-level sync
Resolution    Up to WUXGA, 1080p
Control    Switch for RGB/YPbPr selection
Power Source    5V DC, 490mA
fc-321.jpg
Kramer: fc-321

2x1 3G HD-SDI To HDMI Format Converter

The FC321 is a high-performance format converter for 3G HD-SDI signals. The FC 321 converts one of two 3G HD-SDI signals to an HDMI output signal with the same...

Inputs    2 SDI, HD-SDI, 3G HD-SDI on a BNC connector
Output    1 HDMI connector
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-322.jpg
Kramer: fc-322

2x1:2 3G HD-SDI To HDMI Format Converter

The FC322 is a high-performance format converter for 3G HD-SDI signals. The FC 322 converts one of two 3G HD-SDI signals to two HDMI output signals with the same...

Inputs    2 SDI, HD-SDI, 3G HD-SDI on BNC connectors
Outputs    2 HDMI connectors
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-331.jpg
Kramer: fc-331

3G HD-SDI To HDMI Format Converter

The FC331 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 331 converts the input video format (with embedded audio) to an HDMI...

Input    1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
Outputs    1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector, 1 HDMI connector
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-332.jpg
Kramer: fc-332

3G HD-SDI To HDMI Format Converter

The FC332 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 332 converts the input video format (with embedded audio) to two HDMI...

Input    1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
Outputs    1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector; 2 HDMI connectors
Max. Data Rate    Up to 3Gbps
Standard Compliance    HDMI
Indicator LEDs    SD/HD, OUT, ON
fc-31xl.jpg
Kramer: fc-31xl

Computer Graphics Video To DVI Format Converter

The FC31xl is a high-performance format converter for computer graphics signals with resolutions up to and including WUXGA. The FC 31xl converts a computer...

Input    1 UXGA on a 15-pin HD connector
Output    1 DVI , 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Supported Resolutions    640x480 @60Hz/72Hz/75Hz/85Hz; 720x400 @70Hz/85Hz; 800x600 @56Hz/60Hz/72Hz/75Hz/85Hz; 848x480 @60Hz; 1024x768 @60Hz/72Hz/75Hz/85Hz; 1152x864 @75Hz; 1280x768 @60Hz (RB)/75Hz/85Hz; 1280x800 @60Hz; 1280x960 @60Hz/85Hz; 1280x1024 @60Hz/75Hz/85Hz; 1360x768 @60Hz; 1400x1050 @60Hz(RB)/75Hz; 1440x900 @60Hz; 1440x1050 @60Hz; 1600x1200 @60Hz; 1680x1050 @60Hz; 1920x1080 @60Hz; 1920x1200 @60Hz(RB)
DVI Bandwidth    1.65GHz
Controls    DIP-switches
vp-1.jpg
Kramer: vp-1

15-pin HD To 5 BNC Bi-directional Format Converter

The VP1 is a high-performance passive format converter for all RGBHV and 15-pin HD connector applications. The VP1 converts 15-pin HD computer graphics video...

Input    VGA/UXGA on a 15-pin HD (F) connector or RGBHV on BNC connectors
Outputs    RGBHV on BNC connectors or VGA/UXGA on a 15-pin HD connector
Max. Output Level    4Vpp/75Ω
Bandwidth (-3dB)    1800MHz (1.8GHz)
Controls    ID bit on/off
vp-100.jpg
Kramer: vp-100

Computer Graphics Video To RGB/HV/S Format Converter

The VP-100 is a high-performance format converter for computer graphics video signals. The VP 100 converts a computer graphics video signal on a 15-pin HD...

Input    Looping analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on a 15-pin HD (F) connector
Outputs    1 analog red, green (with or without composite sync), blue signals: 0.7 Vpp/75Ω; H & V syncs: TTL level (Hi-Z load) or analog level (75Ω load) on BNC connectors; composite sync: TTL levels (Hi-Z load) or analog level (75Ω load)
Video Bandwidth (-3dB)    350MHz
Diff. Gain    0.07%
Diff. Phase    0.03Deg
vp-102xl.jpg
Kramer: vp-102xl

Computer Graphics Video To RGBHV & Audio Format Converter

The VP-102xl is a high-performance format converter for computer graphics video and stereo audio signals. The VP 102xl converts a computer graphics video signal...

Input    1 UXGA on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini-jack
Output    1 RGBHV on 5 BNC connectors; 1 UXGA active loop on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini-jack
Max. Output Level    Video: 2Vpp; Audio: 6.8Vpp
Bandwidth (-3dB)    Video: 420MHz; Audio: >100kHz
Diff. Gain    0.05%
482xl.jpg
Kramer: 482xl

Balanced/Unbalanced Stereo Audio Transcoder

The 482-xl is a high-performance audio transcoder for balanced and unbalanced stereo audio signals. The 482 xl simultaneously converts balanced stereo signals to...

Input    1 unbalanced audio stereo on a 3-pin terminal block connector; 1 balanced audio stereo on a 5-pin terminal block
Output    1 balanced audio stereo on a 5-pin terminal block connector; 1 unbalanced audio stereo on a 3-pin terminal block connector
Max. Output Level    Balanced: 21dBu; unbalanced: 21dBu @max gain
Bandwidth (-3dB)    >100kHz
Controls    -57dB to 6dB (balanced to unbalanced level); -16dB to 19dB (unbalanced to balanced level)
6410n.jpg
Kramer: 6410n

Digital Audio To Balanced Stereo Audio Format Converter

Inputs    4 digital audio inputs: AES-3id on a terminal block connector; AES/EBU on a BNC connector; S/PDIF on an RCA connector; TOSLINK® optical connector
Outputs    2 analog outputs: balanced line out on detachable terminal blocks; 3.5mm headphone jack
Sample Rate Conversion    32kHz, 44.1kHz, 48kHz, 96kHz
Conversion Gain    12dB, 16dB, 20dB, 24dB
Bandwidth ( 4dBu/-3dBu)    20Hz to 22kHz
6420n.jpg
Kramer: 6420n

Balanced Stereo Audio To Digital Audio Format Converter

Input    1 analog input balanced line in (10k) on detachable terminal blocks
Outputs    4 digital audio outputs: AES-3id on a BNC connector; AES/EBU on a terminal block connector; S/PDIF on an RCA connector; TOSLINK® optical connector
Sample Rate Conversion    32kHz, 44.1kHz, 48kHz, 96kHz
Max. Input Level    11.2Vpp @1kHz
Conversion Gain    -12dB, -16dB, -20dB, -24dB
6808hdxl.jpg
Kramer: 6808hdxl

3G HD-SDI AES De-Embedder

The 6808HDxl is a high-performance audio de-embedder for 3G HD-SDI video signals. The 6808 HDxl can de-embed two selectable AES audio streams.

Input    1 SD/HD/3G HD-SDI
Outputs    1 SD/HD/3G HD-SDI, 2 AES/EBU audio on BNC connectors
Power Source    5V DC, 390mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 3.0" x 1.0") W, D, H
Weight    0.3kg (0.7lbs)
6810hdxl.jpg
Kramer: 6810hdxl

3G HD-SDI Audio Embedder & De-embedder

The 6810HDxl is a high-performance audio embedder and de-embedder for 3G HD-SDI video signals. The 6810 HDxl can embed and de-embed four AES/3id audio streams.

Inputs    1 x SD/HD/3G HD-SDI, 1 x SD/HD/3G HD-SDI loop, 4 x AES/3id on BNC connectors
Outputs    1 x SD/HD/3G HD-SDI, 4 x AES/3id on BNC connectors
Sample Rate Conversion    48kHz
Power Source    5V DC, 1.04A
Dimensions    21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H
fc-49.jpg
Kramer: fc-49

DVI & Audio To HDMI Format Converter & Audio Embedder

Input    1 DVI-D, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp; 1 S/PDIF (digital audio) on an RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 TOSLINK® optical connector
Output    HDMI connector
Compliance with HDMI Standard    Supports DVI 1.0, HDMI, and HDCP
Operation Frequency    Supports up to 1.65Gbps (UXGA, 1080p)
Controls    EDID button
711n.jpg
Kramer: 711n

Composite Video & Stereo Audio Over Twisted Pair Transmitter

The 711-N is a twisted pair transmitter for composite video and unbalanced stereo audio signals. The 711 N transmitter converts composite video and stereo audio...

Input    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
Output    1 RJ-45 CAT 5 shielded connector (LINE OUT)
Video Max. Signal Level    2.8Vpp
Audio Max. Signal Level    7.6Vpp
Video Bandwidth (-3dB)    85MHz
705xl.jpg
Kramer: 705xl

Composite Video Over Twisted Pair Branching Transmitter

The 705xl is a twisted pair transmitter for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the 706xl...

Input    1 composite video 1Vpp/75Ω on a BNC connector; 1 loop 1Vpp/75Ω on a BNC connector
Output    2 twisted pair outputs on terminal block connectors
Bandwidth (-3dB)    108MHz (-3dB)
Diff. Gain (PAIR)    0.08%
Diff. Phase (PAIR)    0.07Deg
tp-41.jpg
Kramer: tp-41

Component Video & S/PDIF Audio Over Twisted Pair Transmitter

The TP-41 is a twisted pair transmitter for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio...

Input    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
Outputs    1 RJ-45 CAT 5 shielded connector (Line Out)
Max. Output Level    Video: 2.1Vpp
Diff. Gain    0.15%
Diff. Phase    0.68Deg
tp-141.jpg
Kramer: tp-141

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

Inputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio analog 3.5mm mini jack
Outputs    1 RJ-45 OUT connector
Max. Output Level    Video = 1V; Audio = 2.5V
Bandwidth (-3dB)    Audio: 20Hz–20kHz @0.5dB
Resolution    Exceeding UXGA
tp-219hd.jpg
Kramer: tp-219hd

2x1 Computer Graphics & HDTV Video Switcher Over Twisted Pair Transmitter

The TP-219HD is a high-performance twisted pair transmitter for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to...

Inputs    2 XGA/HD on 15-pin HD (F) connectors. Input Select Button
Output    1 CAT 5 on an RJ-45 connector
Max. Output Level    1.5Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    2.3%
tp-300fw.jpg
Kramer: tp-300fw

FireWire ® Over Twisted Pair Transmitter/Receiver & Range Extender

The TP-300FW is a twisted pair transmitter or receiver for FireWire ® (IEEE 1394) signals. When used as a pair, one converts a FireWire ® signal into a twisted pair signal and...

Ports    1 serial 1394 port on a 6-pin connector, 2 CAT 5 ports on RJ-45 connectors
Transfer Rate    100Mbps
IEEE-1394 Standards    IEEE 1394a-2000, IEEE 1394-1995, IEEE 1394b-2002 at up to 100Mpbs
ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)
Power Source    12V DC, 60mA
tp-400fw.jpg
Kramer: tp-400fw

FireWire Over Twisted Pair Transmitter/Receiver & Range Extender

The TP-400FW is a twisted pair transmitter or receiver for FireWire ® (IEEE 1394) signals. When used in pairs, one converts a FireWire ® signal into a twisted pair signal and...

Ports    1 1394 port on 6-pin serial connectors, front and rear panels; 2 CAT 5 ports on RJ-45 connectors
Transfer Rate    100Mbps
IEEE-1394 Standards    IEEE 1394a-2000, IEEE 1394-1995, IEEE 1394b-2002 at up to 100Mpbs
ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC
Power Source    230V AC, 50/60Hz (115V AC, USA) 30VA
pt-571.jpg
Kramer: pt-571

HDMI Over Twisted Pair Transmitter

The PT571 is a twisted pair transmitter for HDMI signals. The PT 571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted...

Inputs    1 HDMI connector
Outputs    1 RJ-45 connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3 and HDCP
Power Source    12V DC, 250mA (transmitter and receiver together)
712n.jpg
Kramer: 712n

Composite Video & Stereo Audio Over Twisted Pair Receiver

The 712-N is a twisted pair receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair...

Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
Output    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
Video Max. Signal Level    2.8Vpp
Audio Max. Signal Level    7.6Vpp
Video Bandwidth (-3dB)    85MHz
tp-10.jpg
Kramer: tp-10

Composite Video, S-Video & Stereo Audio Over Twisted Pair Receiver With IR Repeater

The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video...

Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
Output    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector
Max. Output Level    Video: 2.6V; Audio: 4.6Vpp
Bandwidth    Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB
Non-Linearity    <0.05%
706xl.jpg
Kramer: 706xl

Composite Video Over Twisted Pair Branching Receiver

The 705xl and 706-xl are a twisted pair transmitter and receiver for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the...

Input    1 twisted pair input on terminal block connectors; 1 loop on terminal block connectors
Output    2 composite video 1Vpp/75Ω on BNC connectors
Bandwidth (-3dB)    108MHz (-3dB)
Diff. Gain (PAIR)    0.08%
Diff. Phase (PAIR)    0.07Deg
tp-42.jpg
Kramer: tp-42

Component Video & S/PDIF Audio Twisted Pair Receiver

The TP-42 is a twisted pair receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a...

Input    1 RJ-45 CAT 5 shielded connector (line in)
Outputs    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
Max. Output Level    Video: 2.1Vpp
Max. Resolution    1080i
Diff. Gain    0.15%
tp-124.jpg
Kramer: tp-124

Computer Graphics Video, Stereo & S/PDIF Audio & Data Over Twisted Pair Receiver

The TP-124 is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs...

Input    1 RJ-45 OUT connector
Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
tp-142.jpg
Kramer: tp-142

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

Inputs    1 RJ-45 LINE IN connector
Outputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio S/PDIF RCA connector, 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V, Audio: 2.5V
Controls    Level: –7.5dB to 4.4dB
EQ    0dB to 33dBm, (130m) @50MHz
vs-81eth.jpg
Kramer: vs-81eth

8x1 Twisted Pair Switcher

The VS81ETH is a bi-directional switcher for analog or digital signals on twisted pair cable. The VS 81ETH switches any one of eight inputs to a single output.

Inputs    8 RJ-45 CAT 5 ports
output    1 RJ-45 CAT 5 port
Bandwidth(-3dB)    3Gbps
Control    9 illuminated front panel buttons, RS-232, RS-485, contact closure, Ethernet, IR
Power Source    90-240V AC, 8VA
611t.jpg
Kramer: 611t

Composite Video Optical Transmitter

The 611-T is a high-performance fiber optic transmitter for composite video signals. The 611 T transmitter converts a composite video signal into a fiber optic...

Input    Composite video, 1Vpp/75Ω on a BNC connector
Output    Fiber optic ST connector, G62.5/125um (recommended) or G50/125um multimode fiber optic cable
Operation Distance    Up to 5km (multimode)
Video Bandwidth (-3dB)    55MHz
Diff. Gain    0.4%
611r.jpg
Kramer: 611r

Composite Video Optical Receiver

The 611T and 611-R are a high-performance fiber optic transmitter and receiver for composite video signals. The 611T transmitter converts a composite video signal into a fiber...

Input    Fiber optic ST connector
Output    Composite Video 1Vpp/75Ω on a BNC connector
Operation Distance    Up to 5km (MultiMode)
Video Bandwidth (-3dB)    55 MHz. 20 MHz
Diff. Gain    0.4%
621t.jpg
Kramer: 621t

DVI Optical Transmitter

The 621T is an optical transmitter for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the...

Input    DVI-D on a DVI-I connector
Output    4 LC optical connectors for R, G, B & Clock. 1 CAT 5 (RJ-45) for DDC and HDCP bidirectional data
Bandwidth    1.65Gbps
Power Source    12V DC, 500mA
Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
621r.jpg
Kramer: 621r

DVI Optical Receiver

The 621R is an optical receiver for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the optical...

Input    4 LC optical connectors for R, G, B & clock. 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Output    DVI-D on a DVI-I connector
Bandwidth    1.65Gbps
Power Source    12V DC, 1.25A
Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
622t.jpg
Kramer: 622t

Dual Link DVI Optical Transmitter

The 622T and 622R are optical transmitter and receivers for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an...

Input    DVI-D on a DVI-I connector
Output    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Bandwidth    3.3Gbps
Power Source    12V DC, 200mA
Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
622r.jpg
Kramer: 622r

Dual Link DVI Optical Receiver

The 622T and 622R are an optical transmitter and receiver pair for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an optical...

Input    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue, & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Output    DVI-D on a DVI-I connector
Bandwidth    3.3Gbps
Power Source    12V DC, 200mA
Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
650t.jpg
Kramer: 650t

DVI Over Coax Transmitter

The 650T is a high-performance transmitter for DVI, RS-232 and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them...

Inputs    1 DVI connector
Outputs    5 BNC connectors
Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Power Source    12V DC, 330mA
650r.jpg
Kramer: 650r

DVI Over Coax Receiver

The 650R is a high-performance receiver for DVI, RS-232, and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them back...

Inputs    5 BNC connectors
Outputs    1 DVI connector
Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Power Source    12V DC, 330mA
671t.jpg
Kramer: 671t

DVI Over Fiber Optic Transmitter

The 671T is a high-performance fiber optic transmitter for DVI signals. The 671T converts a DVI signal to light pulses that are transmitted over one single fiber...

Inputs    DVI connector
Outputs    Optical connector
Data Rate    Up to 1.65Gbps
Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
671r.jpg
Kramer: 671r

DVI Over Fiber Optic Receiver

The 671T and 671R are a high-performance fiber optic transmitter/receiver duo for DVI signals. The unit converts a DVI signal to light pulses that are transmitted over one single...

Inputs    1 optical connector
Outputs    DVI connector
Data Rate    Up to 1.65Gbps
Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
670r.jpg
Kramer: 670r

HDMI Over Fiber Optic Receiver

The 670R is a high-performance fiber optic receiver for HDMI signals. The 670R receives an optical signal from the 670T and converts the light pulses back to an...

Inputs    1 optical connector
Outputs    HDMI connector
Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
Extension Limit    1700m (>5570 feet) for 1080p/60Hz
670t.jpg
Kramer: 670t

HDMI Over Fiber Optic Transmitter

The 670T is a high-performance fiber optic transmitter for HDMI signals. The 670T converts an HDMI signal to light pulses that it transmits over one single fiber...

Inputs    HDMI connector
Outputs    1 optical connector
Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
Extension Limit    1700m (>5570 feet) for 1080p/60Hz
pt-101hdcp.jpg
Kramer: pt-101hdcp

DVI Repeater

The PT101HDCP is a line driver/repeater for DVI-D video signals. The PT 101HDCP reclocks and equalizes the signal enabling multiple units to be cascaded.
...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Output    1 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 2.25Gbps bandwidth
Power Source    5V DC, 180mA
Dimensions    6.22cm x 5.23cm x 3.20cm (2.5" x 2.1" x 1.3") W, D, H
va-256xl.jpg
Kramer: va-256xl

Audio Delay For Balanced Stereo Audio

The VA256xl is a high-performance audio delay for balanced stereo audio signals. The VA 256xl synchronizes the audio and video signals when they are out of sync....

Input    4dBu/30kΩ on a detachable terminal block connector
Outputs    4dBu/50Ω on a detachable terminal block connector
Max. Input/Output Level    12dBu balanced
Bandwidth    20Hz to 20kHz
THD Noise    <0.01%, 4dBu 1kHz
102mx.jpg
Kramer: 102mx

2 Channel Stereo Audio Mixer

The 102-MX is a high-performance 2-channel stereo audio mixer for line level and mic level audio signals. The 102 MX mixes one line level input with either a...

Inputs    Mic/line 1: 10mV/1.6kΩ, 1Vpp/10kΩ, on 6.5mm phone connector; Line 2: 1Vpp/10kΩ, stereo on RCA connectors
Outputs    Line level, stereo, up to 5.6Vpp/150Ω on RCA connectors
Bandwidth (-3dB)    100kHz
Gain Range    -12dB to 68.5dB (mic); -12dB to 8.8dB (line 1)
Diff. Phase    0.05Deg
102xl.jpg
Kramer: 102xl

2 Channel Balanced Mono Audio Mixer

The 102-xl is a high-performance 2-channel mono audio mixer for balanced line level and mic level mono audio signals. The 102 xl mixes two mono inputs and...

Inputs    2 line/mic balanced mono on XLR (F) connectors
Output    1 line/mic balanced mono on an XLR (M) connector
Max. Output Level    18Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    Line: 91.5dB Mic: 62.5dB, 1kHz
va-14.jpg
Kramer: va-14

4 Channel Balanced Audio Mixer

The VA14 is a high-performance 4-channel mixer for balanced mono audio signals on XLR connectors. The VA 14 inputs four channels of any combination of balanced...

Inputs    4 balanced audio, line or mic, on XLR (F) connectors
Outputs    2 audio, balanced on XLR (M) connectors; 1 headphone output on a 6.5mm connector
Max. Output Level    Line: 20Vpp; Phones: 4.5Vpp; Mic: 300mVpp
Bandwidth (-3dB)    >40kHz
S/N Ratio    Mic in, phones out: 45.3dB; line in, phones out: 83.3dB; line in, line out: 84.3dB;mic in, line out: 64dB
900n.jpg
Kramer: 900n

Stereo Power Amplifier (8.4 Watts Per Channel)

The 900-N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. With the 900 N, either input can deliver a speaker output of 8.4...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector
Output    1 stereo loudspeaker output on a 4-pin terminal block connector
Output Power    8.4W RMS per channel into a 4Ω load
Output Music Power    35W RMS per channel into a 4Ω load
Bandwidth (-3dB)    24kHz
901.jpg
Kramer: 901

2x1 Personal Stereo Audio Power Amplifier & Switcher

The 901 is a high-performance integrated personal stereo amplifier for unbalanced stereo signals. The 901 accepts a stereo audio signal and delivers a speaker...

Inputs    1 unbalanced stereo audio, 1Vpp/50Ω on RCA connectors; 1 mono microphone, 5mV/3.2Ω (condenser) 4.8Ω (dynamic) with a type selector, on a 6.5mm phone jack
Outputs    Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output
Max. Output Level    8Vpp at Hi-Z load (headphones)
Bandwidth (-3dB)    37kHz
S/N Ratio    74dB
903.jpg
Kramer: 903

4x1 Personal Stereo Audio Amplifier & Switcher (10W/Channel)

The 903 is a high-performance integrated personal amplifier for unbalanced stereo audio signals. The 903 allows selection between four inputs and delivers a...

Inputs    1 unbalanced stereo audio 1Vpp/50Ω on a 3.5mm mini jack; 3 unbalanced stereo audio 1Vpp/50Ω on RCA connectors
Outputs    Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in
Output Power    2x10W (4Ω)
Output Music Power    2x40W (4Ω)
Bandwidth (-3dB)    20kHz
907.jpg
Kramer: 907

Stereo Audio Power Amplifier (40 Watts Per Channel)

The 907 is a high-performance power amplifier for line-level stereo audio signals. The 907 accepts a balanced stereo audio signal on a terminal block connector...

Input    1 balanced stereo audio on a terminal block connector
Output    1 balanced stereo audio (speakers) on a terminal block connector
Output Power    40 watts per channel into 8Ω
Output Music Power    150W per channel into 8Ω
Input Sensitivity    1.2Vrms
va-8xl,jpg
Kramer: va-8xl

8-Channel Balanced Stereo Audio Amplifier

The VA-8xl is a high-performance 8 channel-balanced stereo input volume controller for balanced audio signals on terminal block connectors. The volume of each L & R stereo channel...

Input    8 balanced stereo audio 4dBu/30kΩ on detachable terminal blocks
Output    8 balanced stereo audio 4dBu/50Ω on detachable terminal blocks
Gain    -95dB to 31dB
Max. Output Level    >20dBu balanced (THD N <0.01)
Bandwidth ( - 3dB)    20Hz to 40kHz
tr-1a.jpg
Kramer: tr-1a

Balanced Mono Audio Isolation Transformer

The TR1A is a high-performance isolation transformer for balanced mono audio signals. The TR 1A completely isolates devices to eliminate hum, ground loops, and DC...

Input    1 balanced audio 4dBu/600Ω on a detachable terminal block
Output    1 balanced audio 4dBu/600Ω on a detachable terminal block
Max. Output Level    26dBu
Bandwidth (-3dB)    20Hz to 20kHz
S/N Ratio    -83dB @ 4dBu/1kHz
kds-en2t.jpg
Kramer: kds-en2t

HDMI over IP Transmitter

The KDS−EN2T is an IP−based transmitter for HDMI signals. Using JPEG2000 compression technology, the KDS−EN2T sends a visually lossless HD image...

Input    1 balanced audio 4dBu/600Ω on a detachable terminal block
Output    1 balanced audio 4dBu/600Ω on a detachable terminal block
Max. Output Level    26dBu
Bandwidth (-3dB)    20Hz to 20kHz
S/N Ratio    -83dB @ 4dBu/1kHz
tr-2a.jpg
Kramer: tr-2a

Balanced Stereo Audio Isolation Transformer

The TR-2A is a high-performance isolation transformer for balanced stereo signals. The TR-2A completely isolates devices to eliminate hum, ground loops, and DC...

Input    1 balanced stereo audio 4dBu/600Ω on detachable terminal block
Output    1 balanced stereo audio 4dBu/600Ω on detachable terminal block
Max. Output Level    26dBu
Bandwidth (-3dB)    20Hz to 20kHz
S/N Ratio    -83dBu @ 4dBu/1000Hz
tr-3.jpg
Kramer: tr-3

Video & Balanced Stereo Audio Isolation Transformer

The TR-3 is a high-performance isolation transformer for composite video and balanced stereo signals. The TR-3 provides complete isolation between devices to...

Inputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
Outputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
Insertion Loss    0.8dB (video)
Max. Output Level    Video: 4VPP/75Ω; Audio: 26dBu
Bandwidth (-3dB)    Video: <10Hz to 5.8MHz -3dB; Audio: 20Hz to 20kHz
va-1dvin.jpg
Kramer: va-1dvin

DVI EDID Emulator

The VA−1DVIN is an EDID emulator for DVI−D signals. The unit can capture an EDID setting in non−volatile memory from the output allowing convenient and reliable...

Inputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
Outputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
Insertion Loss    0.8dB (video)
Max. Output Level    Video: 4VPP/75Ω; Audio: 26dBu
Bandwidth (-3dB)    Video: <10Hz to 5.8MHz -3dB; Audio: 20Hz to 20kHz
tr-1.jpg
Kramer: tr-1

Video Isolation Transformer

The TR1 is a high-resolution isolation transformer for composite video signals. The TR 1 completely isolates devices to eliminate video hum, ground loops, and DC...

Input    1 composite video, 1Vpp/75Ω on a BNC connector
Output    1 composite video, 1Vpp/75Ω on a BNC connector
Insertion Loss    0.8dB
Max. Output Level    4 Vpp/75Ω
Bandwidth (-3dB)    5.8MHz
kds-en1.jpg
Kramer: kds-en1

H.264 HD IP Encoder

The KDS−EN1 is an H.264−based encoder for digital signals up to 3G HD−SDI, composite and component video, HDMI and balanced audio. All signals are encoded and...

Input    1 composite video, 1Vpp/75Ω on a BNC connector
Output    1 composite video, 1Vpp/75Ω on a BNC connector
Insertion Loss    0.8dB
Max. Output Level    4 Vpp/75Ω
Bandwidth (-3dB)    5.8MHz
vp-424.jpg
Kramer: vp-424

HDMI to HDMI ProScale™ Digital Scaler

The VP−424 is a high−performance digital scaler for HDMI signals. It up− or down−scales the input to a selectable resolution on an HDMI

Input    1 composite video, 1Vpp/75Ω on a BNC connector
Output    1 composite video, 1Vpp/75Ω on a BNC connector
Insertion Loss    0.8dB
Max. Output Level    4 Vpp/75Ω
Bandwidth (-3dB)    5.8MHz
tr-1yc.jpg
Kramer: tr-1yc

S-Video Isolation Transformers

The TR1-YC is a high-performance isolation transformer for s-Video (Y/C) signals. The TR-1YC provides complete isolation between devices to eliminate hum, ground...

Input    1 s-Video on a 4-pin connector
Output    1 s-Video on a 4-pin connector
Insertion Loss    0.8dB
Bandwidth (-3dB)    5.8MHz
Diff. Gain    0.12%
va-1dvin.jpg
Kramer: va-1dvin

DVI EDID Emulator
The VA1DVIN is an EDID emulator for DVI-D signals. The VA 1DVIN can capture an EDID setting in non-volatile memory from the output allowing convenient and reliable...
Input    1 x DVI dual link, DVI 1.0, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Output    1 x DVI, dual Link, DVI 1.0, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Bandwidth    3.3Gbps
Controls    Capture EDID button
Power Source    5V DC, 20mA
va-1vgan.jpg
Kramer: va-1vgan

Computer Graphics Video EDID Emulator
The VA1VGAN is an EDID emulator for computer graphics video signals. The VA 1VGAN can capture an EDID setting in non-volatile memory from the output allowing...
Input    1 XGA input on a 15-pin HD connector
Output    1 XGA output on a 15-pin HD connector
Max. Output Level    >2Vpp
Bandwidth (-3dB)    1.8GHz
Diff. Gain    0.02%
vs-4fw.jpg
Kramer: vs-4fw

4-Port FireWire® Repeater/HUB

The VS−4FW is a high−performance bidirectional hub/repeater for 6−pin FireWire ® (IEEE 1394) signals. It increases the number of ports available and/or extend the...

Ports    VS-4FW: Four 6-pin serial 1394 Ports
Transfer Rate    100/200/400Mbps
Standards    IEEE 1394-1995, P1394a
Power Source    12V DC, 200mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
vs−8fw.jpg
Kramer: vs-8fw

8-Port FireWire® Repeater/HUB

The VS−8FW is a high−performance bidirectional hub/repeater for 6−pin FireWire ® (IEEE 1394) signals. It increases the number of ports available and/or extend the...

Ports    Eight 6-pin serial 1394 Ports
Transfer Rate    100/200/400Mbps
Standards    IEEE 1394-1995, P1394a
Power Source    12V DC, 300mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
vs-30fw.jpg
Kramer: vs-30fw

3-Port FireWire ® 800 Repeater/HUB

The VS30FW is a high-performance bi-directional hub/repeater for 9-pin FireWire ® 800 (IEEE 1394b) signals. The VS 30FW increases the number of ports available...

Ports    3 bi-directional IEEE 1394b 800Mbps (S800) ports
Transfer Rate    100/200/400/800Mbps (S100, S200, S400, S800)
Standards    IEEE 1394-1995, IEEE P1394a, IEEE P1394b
Power Source    12V DC, 500mA or from the attached PC
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
810.jpg
Kramer: 810

Composite Video & S-Video Color Bar/Audio Tone Generator

The 810 is a high-performance composite video and s-Video (Y/C) color bar and 1kHz audio tone generator. The 810 outputs two composite video and one s-Video color...

Video Outputs    2 75% color bar on BNC connectors, 1Vpp/75Ω; 1 75% s-Video color bar on a 4-pin connector, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C)
Audio Outputs    1kHz, 4dBu/47Ω; balanced stereo audio on a detachable terminal block
Video S/N Ratio    75dB
Control    PAL/NTSC selector switch; audio level control (trimmer)
Line Jitter    2ns
vm-24hc.jpg
Kramer: vm-24hc

2x1:4 HDMI Switcher & DA

The VM−24HC is a high−performance switcher and distribution amplifier for HDMI signals. The unit accepts one of two HDMI inputs and distributes the selected signal to...

Video Outputs    2 75% color bar on BNC connectors, 1Vpp/75Ω; 1 75% s-Video color bar on a 4-pin connector, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C)
Audio Outputs    1kHz, 4dBu/47Ω; balanced stereo audio on a detachable terminal block
Video S/N Ratio    75dB
Control    PAL/NTSC selector switch; audio level control (trimmer)
Line Jitter    2ns
vp-794.jpg
Kramer: vp-794

Event Presentation Scaler

The VP−794 is a high−performance switcher/scaler/edge−blend & warp for analog and digital video signals developed specifically for driving large screen displays and...

Video Outputs    2 75% color bar on BNC connectors, 1Vpp/75Ω; 1 75% s-Video color bar on a 4-pin connector, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C)
Audio Outputs    1kHz, 4dBu/47Ω; balanced stereo audio on a detachable terminal block
Video S/N Ratio    75dB
Control    PAL/NTSC selector switch; audio level control (trimmer)
Line Jitter    2ns
sg-6005xl.jpg
Kramer: sg-6005xl

Multi-Standard Composite Video Black Burst, Color Bar & Audio Tone Generator

The SG6005xl is a broadcast quality black burst, color bar, sync, and audio tone generator for composite video and audio applications. The SG 6005xl outputs ten...

Inputs    1 REF (genlock), looping, 1Vpp/75Ω, on BNC connectors with a termination switch
Outputs    10 composite video on BNC connectors, globally configurable: black burst 0.3Vpp/75Ω (sync) or 1Vpp/75Ω max (color bar); 1 balanced stereo audio on 2 XLR connectors, 12dBu max; 1 unbalanced stereo audio on 2 RCA connectors, 6dBu max; 2 AES/EBU digital audio on XLR connectors, 0dBFS max; 2 AES-3id (75Ω) digital audio on BNC connectors, 0dBFS max
Video Standards    PAL, NTSC
Color Bar    8 selectable patterns
Stability    1ppm
vp-800.jpg
Kramer: vp-800

Computer Graphics Video Color Bar Generator

The VP800 is a high-performance computer graphics video color bar generator. VP 800 outputs color bars at 640x480, 800x600, 1024x768 and 1280x1024 resolutions on...

Output    Standard VGA/SXGA RGBHV signal on a 15-pin HD (F) connector
Resolutions    640x480, 60Hz; 800x600, 75Hz; 1024x768, 75Hz; 1280x1024, 74Hz
Power Source    12V DC, 200mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
Weight    0.3kg (0.66lbs) approx
vp-701xl.jpg
Kramer: vp-701xl

Computer Graphics Video & HDTV Scan Converter

The VP-701xl is a scan converter for computer graphics video signals. The VP 701xl converts computer graphics video signals up to 2048x2048 or HDTV signals up to...

Input    1 computer graphics or component HDTV on a 15 pin HD (F) connector plus loop
Output    2 CV on a BNC connector, 2 s-Video on a 4-pin connector
Input Resolution    Up to 2048x2048 (computer) and 1080p (HDTV). 24-100kHz H-Freq & 40-150Hz V-Freq
Output Standards    NTSC or PAL (selectable)
Controls    Front panel, IR, and RS-232
vp-704xl.jpg
Kramer: vp-704xl

Computer Graphics Video & HDTV Scan Converter With Video Overlay

The VP-704xl is a scan converter for computer graphics video signals. VP 704xl converts a computer graphics video signal up to 2048x2048 or an HDTV signal up to...

Input    1 computer graphics (RGB/S/HV) or component HDTV on a 15 pin HD (F) connector plus loop; 1 CV & 1 Y/C for genlock
Output    NTSC or PAL (selectable). 1 CV (BNC), 1 s-Video (4-pin) & 1 YUV/Y, R-Y, B-Y (BNCs)
Input Resolution    Up to 2048x2048 (computer) and 1080p (HDTV). 24-100kHz H-Freq & 40-150Hz V-Freq
Control    Front panel, IR, and RS-232
Power Source    100-240V AC
vp-434.jpg
Kramer: vp-434

Component & Computer Graphics Video To HDMI ProScale ™ Digital Scaler

The VP-434 is a high-performance scaler for component video and computer graphics video with unbalanced stereo audio signals. The VP 434 scales the selected video...

Input    1 UXGA on a 15-pin HD (F) connector; 1 component video on 3 RCA connectors; 1 unbalanced stereo audio on a 3.5mm mini jack connector (for the UXGA input); 1 unbalanced stereo audio (left and right) on RCA connectors, 4dBu nominal
Output    1 HDMI connector
Output Resolution    480i, 480p, 576i, 576p, 720p, 1080i, 1080p, VGA, SVGA, XGA, WXGA, SXGA, WSXGA, UXGA, WUXGA, NATIVE
Output Refresh Rate    60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions
Controls    Front panel buttons, contact closure and infrared remote for menu driven OSD control
vp-435.jpg
Kramer: vp-435

HDMI, Component & Computer Graphics Video To HDMI ProScale ™ Digital Scaler

The VP-435 is a high-quality format converter for component video, computer graphics video, HDMI video and unbalanced stereo audio signals. The VP 435 scales the...

Input    1 HDMI connector; 1 UXGA on a 15-pin HD (F) connector; 1 component video on 3 RCA connectors; 1 unbalanced stereo audio on a 3.5mm mini jack connector (for the HDMI input); 1 unbalanced stereo audio on a 3.5mm mini jack connector (for the UXGA input); 1 unbalanced stereo audio (left and right) on RCA connectors, 4dBu nominal