Search

SDI To Multi-Format Analog Video Format Converter & Processor

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The FC7402 is a format converter for SDI (SMPTE 259M) signals. The FC 7402 converts an SDI video signal to composite video, s-Video (Y/C), and RGB/component (RGsB or YUV) video.

→ Non-volatile Memory
→ Front Panel Lockout

→ Input 1 SDI: SMPTE 259M, ITU-R BT.601 (CCIR-601), 75Ω on a BNC connector
→ Outputs 1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (luma), 0.3Vpp/75Ω (chroma) on a 4-pin connector; 1 component: RGB/Y, R-Y, B-Y (1V, 0.7V, 0.7V/75Ω) on BNC connectors; 1 SDI (reclocked): SMPTE 259M, ITU-R BT.601 (CCIR-601) 75Ω on a BNC connector
→ Resolution 10-bit
→ Bandwidth (-3dB) 5.7MHz
→ Non-Linearity /-1.0%
→ Diff. Gain 0.11% (NTSC)
→ Diff. Phase 0.33Deg (NTSC)
→ K-Factor 0.3%
→ S/N Ratio 67dB unweighted
→ Y/C Delay <20ns
→ Equalization >125m for Belden 8281 cable
→ Control RS-232 and front panel: brightness, contrast, color (saturation and separate U, V), hue, and sharpness; front panel lock
→ Power Source 230V AC, 50/60Hz, (115V AC, USA) 13.8VA
→ Dimensions 19" x 7" x 1U W, D, H, rack mountable
→ Weight 2.6kg (5.7lbs) approx
→ Accessories Power cord
→ Bandwidth 5.7MHz (-3dB)
→ Multi-Standard PAL (B/D/G/H/I/Combination-N), SECAM, NTSC (3.58/4.43)
→ NTSC Decoding Options With or without 7.5IRE setup (pedestal)
→ ProcAmp Control Brightness, contrast color (saturation), sharpness, and hue (NTSC Only)
→ Color Space RGB & YUV (selectable)
→ Control Front panel and RS-232 (Windows®-based software is included)
→ Color Bar Generator Built-in color bar generator with timing referenced to SDI Input
→ Looping Input Reclocked and equalized
→ Standard 19" Rack Mount Size 1U

 

fc-7402.pdfspec sheet


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.