Multi-spectral, Prism Based 2-channel Color Camera

Imagine eyes that can both scrutinize a surface and penetrate beneath. That’s what the AD-080CL can do. Simultaneous, separate imaging of visible and NIR light through a single lens.

Think practical benefits. No more awkward 2-camera solutions. No more struggling to align images to the quarter-pixel level that the AD 080CL achieves with rock-solid reliability.

Think cost advantage. One camera doing the work of two. A smarter investment for any simultaneous above & below surface application.

The more you think about the AD080CL, the more attractive it becomes. Whether you’re inspecting currency and checks, or textiles and circuit boards, or fruit and vegetables.

The camera utilizes two prism-mounted Sony ICX204 CCDs (color and monochrome) and outputs 30 full frames/second in continuous (free-run) mode.

Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.

Several trigger modes are also available allowing random capture of individual images.

The AD-080CL performs simultaneous, separate imaging of visible and NIR light through a single lens.

The unique concept of simultaneous capture of color and Near-IR images helps solve a wide variety of inspection tasks. Surface properties are visible in the color channel while the near-IR channel detects just below the surface.

Typical applications include inspection of fruit, vegetables and produce, as well as print quality inspection of a variety of materials and packages.

→ Multi-spectral 2-channel CCD camera
→ Advanced series 2 x 1/3” progressive scan camera
→ Simultaneously captures Visible and Near-IR through the same optical path
→ 1024 (h) x 768 (v) active pixels per channel
→ 4.65 µm square pixels
→ 30 frames/second with full resolution
→ Increased frame rate with partial scan
→ Programmable exposure from 20 micro s to 33 m s
→ Pre-select and Pulse width trigger modes
→ LVAL Synchronous/-asynchronous operation (auto-detect)
→ Auto-iris lens video output allows a wider range of light
→ RGB 24-bit or Raw Bayer 10 or 8-bit output for visible
→ 10 or 8-bit output for Near-IR
→ Setup by Windows NT/2000/XP via serial communication

Sensor, Visible	1/3” color Bayer mosaic IT CCD
Sensor, Near-IR	1/3” Monochrome interline transfer CCD
Pixel Clock	33.75 MHz
Frame rate full frame	30 frames/sec.
Active area	4.76 (h) x 3.57 (v) mm
Cell size	4.65 (h) x 4.65 (v) micro m
Active pixels	1024 (h) x 768 (v)
Color visible	Raw Bayer output, or RGB 24-bit
Read-out modes, Full	1024 (h) x 768 (v) 30 fps
Read-out modes, 1/2 partial scan	1024 (h) x 384 (v) 48 fps
Read-out modes, 1/4 partial scan	1024 (h) x 192 (v) 68 fps
Read-out modes, 1/8 partial scan	1024 (h) x 96 (v) 86 fps
Sensitivity, Visible	1.4 Lux (On sensor, max. gain, shutter off, 50% video)
Sensitivity, Near-IR	0,1micro W/cm2 at 800nm (On sensor, max. gain, shutter off, 50% video)
S/N ratio	>54dB (Gain 0 dB, shutter off)
Video output, Visible	24-bits RGB or raw Bayer output
Video output, Near-IR	8 or 10 bit
Auto-iris lens video	0.7 Vp-p
Gain	-3dB to 12dB
Synchronization	Int. X-tal or ext. trigger
Inputs, Camera Link	Ext. trigger, LVDS, (CC 1)
Inputs, TTL	Ext. Trigger 4V ±2V
Outputs, Camera Link	Clk., FVAL, LVAL, Data, EEN
Outputs, TTL	XEEN
Trigger modes	Pre Select, Pulse Width
Electronic shutter, Pre-set shutter	1/30 to 1/50,000 sec. in 12 steps
Electronic shutter, Programmable exposure	0.5L to 792L (1LVAL unit)
Electronic shutter, Pulse Width Control	1,5L to 60 frames
White balance	Only for RGB 24-bits output, Gain range: -3dB to 6dB, Manual: 3000K to 6500K, One-push: 3000K to 6500K
Knee function	For 24-bit output (visible), Near-IR 8 or 10 bit Knee point, Knee slope
Control interface	Camera Link
Functions controlled by serial communication	Gain, shutter, trigger modes, read-out modes, bit depth
Indicators on rear panel	LED for power and trigger input
Operating Temperature	-5°C to 45°C
Humidity (operation)	20 - 80% non-condensing
Storage temp./humidity	-25°C to 60°C / 20 to 80%
Vibration	3 G (15Hz to 200 Hz XYZ)
Shock	50G
Regulations	CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power	12V DC ± 10% 4 W
Lens mount	C-mount (use 3CCD type with no IR filter)
Dimensions (H x W x L)	55(H) x 55(W) x 80(D) mm
Weight	400 g