Search

adam-6050.jpg
Vicon: adam-6050

IP I/O DEVICE; allows 12 external alarm inputs and 6 outputs to any NVR

The Vicon ADAM-6050 is a I/O device that fits seamlessly into an existing ViconNet® network to allow external alarm inputs and outputs to any NVR, Workstation or Kollector DVR....

ardm-d552.jpg
Marshall Electronics: ardm-d552

Dolby-E / Dolby Digital Decoder Card for AR-DM and AR-VM1 Audio Racks

The Marshall Electronics ARDM-D552 is a Dolby E / Dolby Digital Decorder Module for Marshall Digital Audio Monitors this card is Required for multi-channel

c1-in.jpg
Bosch: c1-in

EIA 19 IN RACK FOR CNFE2MC MEDIA CONVERTER UNIT, 120-230VAC

The Bosch C1-IN Rack Mount Card Cage is used to mount the CNFE2MC/IN media converter device either on a surface or onto a rack, and is capable of holding a maximum of 14...

ce-1coax.jpg
Vicon: ce-1coax

1-channel 5000ft Coax Ethernet Extender

The Vicon CE-1COAX Extenders supports 100 Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75ohm coaxial cable. The IEEE 802.3-compliant extenders...

ce-1utp.jpg
Vicon: ce-1utp

1-channel 3000ft UTP/Twisted Pair Ethernet Extender

The Vicon CE-1UTP Extenders support 100 Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75ohm twisted pair UTP cable. The IEEE 802.3-compliant...

ce-4coax.jpg
Vicon: ce-4coax

4-channel 5000ft Coax Ethernet Extender

The Vicon CE-4COAX Extenders support 100 Mbps Ethernet as well as Pass-through Power over Ethernet (PoE) over standard 75ohm coaxial cable. The IEEE 802.3-compliant extenders also...

dfgusb2pro.jpg
The Imaging Source: DFG-USB2-PRO

NTSC/PAL Video-to-USB Converter

The Imaging Source DFG/USB2-PRO is a 2 input Video-to-USB converter. This DFG/USB2 PRO converter comes with up to 768x576 pixels and up to 30 images/second.

Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x76 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    1xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface    USB 2.0, Typ B
Color formats    UYVY, Y800
dfgusb2propcb.jpg
The Imaging Source: DFG-USB2-PROPCB

NTSC/PAL Video-to-USB Board Converter

The Imaging Source DFG/USB2-PROPCB is a 2 input Video-to-USB converter. This DFG/USB2 PROPCB converter comes with up to 768x576 pixels and up to 30...

Video formats    PAL/NTSC, RS-170/CCIR
Max resolution    PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs    1xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface    USB 2.0, Typ B
Color formats    UYVY, Y800
dtk-pvp27b.jpg
Vicon: dtk-pvp27b

FIXED CAMERA PROTECTION; power, video, BNC video

The Vicon DTK-PVP27B is a fixed Camera Surge Protection.

Protects power and video conductors in one package

5 amp, 24 V circuit protects power...

dtk-rm16nm.jpg
Vicon: dtk-rm16nm

16CH CCTV Video Surge Protector, 1U Rack Mount

The DTK-RM16NM rack mount surge protectors for CCTV video feeds are used by top security professionals. They are effective at preventing damage to DVRs and head-end equipment...

dvr-xs-dvd.jpg
Bosch: dvr-xs-dvd

DVD WRITER EXPANSION KIT (COMPATIBLE WITH THE DIVAR 3000/5000 SERIES ONLY)

The Bosch DVR-XS-DVD DVD+R/RW Writer is used with DIVAR AN 5000 Digital Video Recorders . It can be used for local archiving of recorded

dvr-xs050-a.jpg
Bosch: dvr-xs050-a

DVR STORAGE EXPANSION 500GB

The Bosch DVR-XS050-A Storage Expansion Kit (500 GB) contains a (500 GB) hard drive for Bosch 600 Series DVRs, and helps increase their storage...

ex2c.jpg
Computar: ex2c

Extender (2X) for C-Mount

Attaches between C-mount lens and camera and doubles the focal length


ex2cs.jpg
Computar: ex2cs

(End of Life) Extender (2X) for CS-Mount

This item is E.O.L.

 

Attaches between CS mount lens and camera and doubles the focal

exmb.007b.jpg
Bosch: exmb-007b

HEAVY--DUTY WALL BRACKET, BLACK

The Bocsh EXMB.007B is a versatile heavy-duty wall bracket with a dual pin flat plate housing platform has bolt hole arrangements to suit many Extreme CCTV camera housing models....

exmb.020b.jpg
Bosch: exmb.020b

L-BRACKET ONLY, HEAVY DUTY, BLACK

The Bosch EXMB.020B heavy duty wall bracket is designed to fit small enclosures for tight locations. The pan-adjusted bolt on the underside can also be used to hang infrared...

exmb.061.jpg
Bosch: exmb.061

SS POLE-TOP BRACKET (EX30/82/80/85)

The Bosch EXMB.061 Pole Top Bracket (4") with a symmetric design ensures balanced weight distribution and offers a clean, sleek solution for pole mounted applications. It is...

gwk1.jpg
Ganz: gwk1

Wireless Tx/RX Kit (2 Pieces)

The Ganz GWK1 GWAVE pre-configured point-to-point industrially hardened wireless Ethernet Transmission kit that allows Ethernet data to be transmitted between a client remote...

no-image.jpg
Hitachi: jpe001

4-pin Lens connector

The Hitachi JPE001 4-pin Lens connector is used for the KP-D series cameras


ju-f30.jpg
Hitachi: ju-f30

Junction Box for KP-M20 Series

The Hitachi JU-F30 Junction Box for KP-M20 Series is used for supplying power or synchronization signal to a

ju-m1a.jpg
Hitachi: ju-m1a

Junction Box for KP-M Series

The Hitachi JU-M1A Junction Box provides signal breakouts for all Hitachi KP-M series cameras it includes Video Output, Trigger A & B Inputs, Vertical & Horizontal Drive Inputs,...

kbd-rack.jpg
Bosch: kbd-rack

RACK MOUNT KIT FOR KBD-UNIVERSAL AND KBD-DIGITAL

Use Bosch's KBD-Rack Mounting Kit for Intuikey Series Keyboards to install your KBD-Universal, KBD-Digital, or KBD-MUX security controllers in a standard 19.0" (48.26 cm) rack....

ltc-8802-60.jpg
Bosch: ltc-8802-60

Monitor Expansion Bay for 8800 Matrix Switcher

The Bosch LTC 8802/60 is a monitor expansion bay designed to expand the number of available video outputs on a Bosch 8800 matrix switcher. It accepts up to eight 4-output video...

ltc-8808-00.jpg
Bosch: ltc-8808-00

Video Interconnect Panel for Allegiant System

The Bosch LTC 8808/00 is an interconnect panel that converts 32 BNC video inputs into two 16-conductor ribbon connectors for use with an Allegiant system. This panel is included...

ltc-8810-01.jpg
Bosch: ltc-8810-01

CPU MODULE FOR LTC 8800 SERIES

The LTC 8810/01 is a REP data RX module from Bosch that is specially designed to be used for the LTC 8810/01 monitor expansion bay. The  LTC...

ltc-8816-01.jpg
Bosch: ltc-8816-01

REP DATA RX MODULE, LTC 8802 SERIES

The Bosch LTC 8816/01 is a Data Receiver Module that is compatible with the LTC 8802

ltc-8821-00.jpg
Bosch: ltc-8821-00

32-Port Video Input Module for 8800 Series Matrix Switcher

The Bosch LTC 8821/00 is a 32-port video input module for use with the Bosch Allegiant 8800 matrix switcher. Up to eight of these boards can be used in a single switcher for a...

md-3ge.jpg
Marshall Electronics: md-3ge

3GSDI Input Module for Large MD Series Monitors

The Marshall Electronics MD-3GE 3G-SDI Input Module with Loop-Out attaches to the back of Marshall's 5.6" V-LCD56MD, 7" V-LCD70MD, and 9" V-LCD90MD monitors to equip them with a...

mdo-3g.jpg
Marshall Electronics: mdo-3g

Dual Output 3GSDI module for MD Camera Top Monitors

The Marshall Electronics MDO-3G Dual 3G-SDI Output Module is an add-on output module for Marshall's V-LCD56MD, V-LCD70MD, and V-LCD90MD monitors. It attaches to the back of the...

mic-412-rwac.jpg
Bosch: mic-412-rwac

MIC612/412 REPLACEMENT SILICONE WIPER ASSEMBLY CLEAR (FOR WHITE AND GREY)

The Bosch MIC-412-RWAC Replacement Silicone Wiper Assembly (Clear) is an anodized aluminum wiper arm with a fixed long-life silicone wiper blade that is used as a replacement for...

navitar 1-11736.jpg
Navitar: navitar-1-11736

Zoom 7000 Locking Sleeve

The NAVITAR 1-11736 Zoom 7000 Locking Sleeve that is compatible with the Zoom 7000 close-focusing macro video

navitar 1-19847.jpg
Navitar: navitar-1-19847

76 mm Adapter Plate for Zoom 7000

The NAVITAR 1-19847 is a 76 mm Adapter Plate compatoble with the  Zoom 7000 lens.


navitar 1-63102.jpg
Navitar: navitar-1-63102

DIC Zoom Module

The NAVITAR 1-63102 DIC (Differential Interference Contrast) modules may be used on any ultra coax version (zoom or non-zoom) of the Zoom 6000. The modules work with object side...

navitar 1-63726.jpg
Navitar: navitar-1-63726

DIC Assembly Nikon-High Resolution

The NAVITAR 1-63726 (Differential Interference Contrast) modules may be used on any ultra coax version (zoom or non-zoom) of the Zoom 6000. The modules work with object side NAs...

nei-308v05-23we.jpg
Bosch: nei-308v05-23we

IP IR IMAGER, DINION 850NM, NTSC

The Bosch NEI-308V05-23WE IP IR IMAGER, DINION 850NM, NTSC with Dinion 2X imaging with wide dynamic capability to handle the most demanding lighting situations and Integrated...

nei-309v05-23we.jpg
Bosch: nei-309v05-23we

IP IR IMAGER, DINION 940NM, NTSC

The Bosch NEI-309V05-23WE IP IR IMAGER, DINION 940NM, NTSC with Variable Field Illumination technology provides unmatched low-light and no-light performance and Integrated...

or-70tl.jpg
Marshall Electronics: or-70tl

External Tally Light for 7" ORCHID Auto-Stereoscopic 3D Camera-Top

The Marshall Electronics OR-70TL External Tally Light is designed for use with the 7" ORCHID Auto-Stereoscopic 3D Camera-Top / Field

or-8ho.jpg
Marshall Electronics: or-8ho

Custom Sun Hood for OR-841

The Marshall OR-8HO Sunhood is a foldable soft sunshade designed specifically for the OR-841-HDSDI rack mountable/camera top portable field monitor. The sunshade helps reduce...

or-8rk.jpg
Marshall Electronics: or-8rk

Rackmount Kit to Mount Two OR-841 Units Side by Side

The Marshall Electronics OR-8RK Rack Mount Kit is designed for mounting (2) OR-841-HDSI LCD Monitors side by side in standard 19"

or-cp2.jpg
Marshall Electronics: or-cp2

Bundle Version of Orchid Trueye Color Probe

The Marshall Electronics OR-CP2 is the companion calibration tool for use on all Orchid monitors. The kit comes complete with everything you will need to perform LCD White Balance...

or-xdi-xlr.jpg
Marshall Electronics: or-xdi-xlr

Portable Battery-Powered 3G-SDI to HDMI Cross Converter

The ORCHID OR-XDI is a rugged and portable battery-powered HDMI to 3G-SDI / 3G-SDI to HDMI cross converter. It allows an HDMI video signal to be converted from HDMI to 3G-SDI (with audio) to feed...

prontor-mag-0.jpg
Schneider Optics: prontor-mag-0

Prontor Magnetic Shutter #0

This Schneider Optics Prontor Magnetic #0 shutter (p/n: 00-166020) has a 20mm thickness, a 61mm diameter, a 23mm maximum aperture, a 1.5mm minimum aperture, and a minimum...

ptst050450p.jpg
Opto Engineering: ptst050450p

Projection Pattern - Stripes

The Opto Engineering PTST050450P is a projection pattern for Opto Engineering machine vision LED pattern projectors. The PTST050450P has a stripe

no-image.jpg
Hitachi: r03p3f

3-pin power connector

The Hitachi R03P3F is a 3-pin power connector used for KP-D series cameras


umm-lcdub-rm.jpg
Bosch: umm-lcdub-rm

RACK MOUNT BRACKET, SUPPORTS DUAL 8.4-INCH AND SINGLE 8.4 TO 19-INCH

The Bosch UMM-LCDUB-RM Rack Mount Bracket, with a maximum load capacity of 20.94 lb (9.5 kg), can be used for mounting dual 8.4" (21.33 cm) and single 8.4 to 19" (21.33 to 48.26...

umm-led32-sd.jpg
Bosch: umm-led32-sd

TABLE STAND FOR UML-323 32" LED MONITOR, BLACK

The black UMM-LED32-SD UML Series Desktop Monitor Stand from Bosch is used to support the UML series 32" LED

umm-led42-sd.jpg
Bosch: umm-led42-sd

TABLE STAND FOR UML-553 AND 423 LED MONITOR

The black UMM-LED42-SD Table Stand from Bosch is designed for use with the UML-553-90 and UML-423-90 1080p LED

umm-led46-sd.jpg
Bosch: umm-led46-sd

TABLE STAND FOR UML-463, 553 AND 423 MONITOR

The Bosch UMM-LED46-SD is a table stand that is compatible with the UML-463, UML-553, and the UML-423

umm-lw-20b.jpg
Bosch: umm-lw-20b

MONITOR MOUNT, WALL, FIXED, FOR LCD MONITORS UP TO 26-INCHES

The Bosch UMM-LW-20B Monitor Wall Mount (Fixed) can be used to set up and mount VESA-compliant monitors measuring 20" (50.8cm) and smaller. You can use the UMM-LW-20B fixed wall...

umm-lw-30b.jpg
Bosch: umm-lw-30b

MONITOR MOUNT, WALL, TILT/SWIVEL, FOR LCD MONITORS 26-INCHES

The Bosch UMM-LW-30B Tilt/Swivel Wall Mount is part of the series of Universal Monitor Mounts (UMM) which accommodate VESA-compliant monitors for wall mounting....

umm-wmt-32.jpg
Bosch: umm-wmt-32

TILT WALL MOUNT FOR UML-323 32" LED MONITOR, BLACK

The black UMM-WMT-32 Tilt Wall Mount for UML323 32" LED Monitor from Bosch comes in 2 pieces, namely, a VESA-compliant mounting plate that attaches to the monitor and a V-shaped...

v-vl2122-01.jpg
Marshall Electronics: v-vl2122-01

Coaxial Video Transmitter and Receiver

The V-VL2122 is a product that can send Audio, NTSC/PAL Video and Power over a single RG59 coax cable. It works with both color and B/W cameras and monitors. It is ideal for...

v1400x-idl.jpg
Vicon: c1400x-idl

DISTRIBUTION LINE CONTROL

The V1400X-IDL Intelligent Distribution Line Control from Vicon is a device designed to facilitate and automate the management and control of your Vicon control/matrix system and...

vm100.jpg
Computar: vm100

CBC VM100 Extension Tube Kit

This CBC VM100 extension tube kit attaches between lens and camera and reduces minimum focusing distance.

The VM100 Extension Tube Kit allows to be focused on an object...

vm400.jpg
Computar: vm400

Computar VM400 Extension Tube (5mm)

The VM400 is a 5mm Adapter Ring attaches between lens and camera, which converts C-Mount Lens to CS-Mount Camera.