2/3" Mohochrome Progressive Scan CCD GigE Vision Camera, Non-RoHS With Lead Processing

JAI Pulnix - TM-1327GE View Larger Image (in new window)

JAI Pulnix : TM-1327GE

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The JAI TM-1327GE is a non-RoHS, with lead processing version of the RM-1327GE camera.

The TM-1327GE is a small, high-resolution (1.4 megapixels) monochrome progressive scan CCD camera with Gigabit Ethernet output and a standard frame rate of 30 frames per second. The TM 1327GE features the Sony ICX285AL CCD imager for the best image quality and full vertical/horizontal resolution of high-speed shuttered images. The TM1327GE also offers a wide dynamic range with high sensitivity over both visible and near IR portions of the spectrum, making it well suited to applications involving widely varying light conditions, specialized targeting, or inspection of blemishes or defects not easily observed in the visible spectrum.

The TM-1327GE is supported by JAI's easy-to-use SDK and Control Tool software, offering straightforward setup and full GigE Vision and GenICam compliance. The camera also integrates smoothly with a variety of third-party GigE Vision software libraries and development tools.

→ 2/3" progressive scan IT CCD (ICX285AL/ICX285AQ)
→ 1392(H) x 1040(V) @ 30 fps
→ 6.45 μm square pixels
→ Compact 51 x 51 x 85 mm housing
→ High speed point-to-point connection, up to 1Gbps
→ GigE Vision output (8-bit/10-bit selectable)
→ Gigabit Ethernet output (8-bit/10-bit selectable)
→ Near IR sensitivity and high gain CCD output
→ Maximum dynamic range control through built-in look-up table (8-bit only)
→ User-definable variable partial scan
→ Full-frame shutter to 1/21,000 sec.
→ Asynchronous reset, no-delay shutter
→ High gain CCD output and near IR sensitivity
→ Extensive software developer’s kit (SDK)

Sensor 2/3" progressive scan interline transfer CCD
Active area 8.98mm x 6.71mm
Active pixels 1392 (H) x 1040 (V)
Cell size 6.45 μm x 6.45 μm
Readout mode 1392 (H) x 1040 (V) @ 30 Hz, User-definable partial scan
Synchronization Internal/External auto switch, HD/VD, 4.0 Vp-p impedance 4.7K Ohm, VD= 30 Hz ± 5%, non-interlace, HD=31.59 kHz ± 5%
Pixel clock 55.00 MHz
S/N ratio >52 dB
Sensitivity, Mono 0.4 lux f=1.4 (no shutter) @ 30 fps,
Video output Gigabit Ethernet (8-bit/10-bit)
Gamma Programmable LUT (Gamma 1.0 std)
Shutter speed (programmable) 1/30 to 1/21,000 in increments of 31.65 μs
Lens mount C-mount (use >2/3" format lenses)
Power 12V DC ± 10%, 430 mA (typical at 25° C)
Operating temperture -10° C to 50° C
Vibration 7 Grms (10 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 51 mm x 51 mm x 85 mm
Weight 212 g (without tripod)


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.