2MP Monochrome Progressive Scan CCD HDTV-Format Camera, Camera Link Interface

The JAI RM-2030CL is a compact, high-resolution (2 Megapixels) HDTV-format monochrome progressive scan CCD camera with a wide-screen field of view (FOV) of 1920 x 1080 pixels. The camera features a dual-tap front-end, automatic channel balancing, Camera Link digital output, and a frame rate of 32 fps at full resolution. A single-tap mode at 16 fps is user selectable. The RM 2030CL features the Kodak KAI-2093 1" CCD imager for high image quality and sensitivity.

The RM2030CL delivers an outstanding signal-to-noise ratio of >57 dB in typical operation. A high performance front-end provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). The camera has a flexible programmable shutter capable of speeds from 1/32 to 1/16,000 second in one-line increments of 27.5 μs. Other advanced features include defective pixel compensation, and a PIV mode.

Camera parameters can be uploaded from the PC to the RM-2030CL camera. Once these parameters are stored in EEPROMs, an instantaneous change from one setting to another can be done with a delay of a few frames in between.

Some of the functions that can be controlled by these parameters are: manual, async and pulse-width control shuttering; save, load and report settings; and channel auto balancing.

A non-RoHS version of this camera with lead processing (TM-2030CL) is also available for quantity orders.

A GigE Vision version of this camera is also available.
 

→ 1" progressive scan IT CCD imager (KAI-2093)
→ 1920(H) x 1080(V) pixels (HDTV format)
→ 7.4 μm square pixels
→ 32 fps in dual-tap mode
→ SW selectable single-tap mode @ 16 fps
→ 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
→ Digital Camera Link output and analog output
→ Full-frame shutter to 1/16,000 sec.
→ Asynchronous reset, no-delay, pulse width control shutter
→ Defective pixel compensation
→ PIV (particle imaging velocimetry) mode
→ Automatic channel balancing
→ GUI or serial commands for external control