Equipment Access Rack For Millwork And In Wall

The Middle Atlantic AXS-Series shall be constructed of the following materials: top, base, caster brackets, and horizontal braces shall be 13-gauge steel with black powder coat finish, rack uprights shall be 11-gauge steel rackrail with tapped 10-32 mounting holes in universal EIA spacing.

The AXS rackrail shall be finished in black e-coat with marked rackspaces, top and bottom trim panels shall be 11-gauge aluminum with a black brushed and anodized finish. Cable carrier shall be constructed of the following materials: cable carrier and lower hinges shall be constructed of 16-gauge steel, center hinge shall be constructed of 10-gauge steel and cable carrier shall be finished in a black powder coat.

→ Pull-out frame rack saves time & reduces labor.
→ Frame heights range from 10 sp. (17.5") or 15 sp. (26.25") to 43 sp. (75.25").
→ Available in 16", 20" or 26" depths.
→ 650 lb. weight capacity with proper distribution.
→ Mechanically interlocking corner for exceptional strength.
→ Heavy-duty 13-gauge steel top & bottom.
→ 2 pairs fixed-position 11-gauge threaded 10-32 front & rear rackrail.
→ Cable Management Tray provides additional capacity for large cable bundles.
→ Brush Gasket fills unsightly gaps that may appear between the rack and custom millwork (requires a rough-in width of 19-5/8").
→ Finished in a durable black powder coat.

Available in 2 extension lengths

25" or 48".