17-Inch 10-Bit Production Monitor

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The JVC 17" DT-V17G15 Multi-Format HD LCD Monitor is a widescreen 1080p/60/50 broadcast monitor designed with a focus on gamma, color gamut, and grayscale. Four gamma modes -- 2.2, 2.35, 2.45, and 2.6 -- are preset to accommodate varying contrast needs, and two color gamut modes -- Wide and the standard ITU-709 -- are selectable between so you can test your footage in high and low color variations. In NTSC mode, Wide covers 110% of the panel's color space.

Both color resolution and processing are at 10 bit. The monitor features an IPS panel with a 178° viewing angle and with low chromatic variation, which combined with 10-bit processing helps increase the shades of gray for smooth gradation.

A comprehensive set of connections includes two SDI inputs that each support up to 3G but that are also linked to support Dual Link input from sources not capable of 3G output.

DT-V17G15Z features include:

  • True 10-bit 1920 x 1080 IPS panel with 10-bit processing
  • Full array mercury free RGB-LED backlight
  • Wide viewing angle
  • Selectable gamma preset modes 2.2, 2.35, 2.45, 2.6
  • Two gamut modes:
    • Precise ITU-709 gamut mode (default)
    • Wide gamut mode covers 110% NTSC color space
  • 3G/Dual-link HD-SDI inputs
  • LTC, VITC, and D-VITC support
  • Waveform/Vectorscope
  • On screen marker functions
  • 16-channel audio metering
  • AC/DC Power input
Display 17.3" diagonally (44 cm)
Active matrix TFT LCD
Aspect Ratio 16:9
Effective Screen Size 14.6 x 8.2" (37.3 x 21 cm)
Resolution 1920 x 1080

640 x 480/60p/59.94p
Display Colors 1,073,000,000
Viewing Angle 178 / 178°
Brightness 300 cd/m2
Contrast Ratio 800:1
H/V Frequency (PC Signals) Horizontal: 31.469 to 75 kHz
Vertical: 48 to 65 Hz

Depending on the signal within the range of these frequencies, some signals may not be displayable. In such case, "Out of Range" will appear.
Inputs 2x 3G/HD/SD-SDI on BNC
Together they support Dual Link input from sources not capable of 3G
Individually, each supports up to 3G

1x DVI-D
HDCP compatible

1x Component on 3 BNCs

1x Composite on 2 BNCs
Shared with Composite output by bridge connection with auto termination
1 V (p-p), 75 ohms

1x Analog audio on 2 RCAs
500 mV (rms)
High impedance
Outputs 1x 3G/HD/SD-SDI BNC
Switched and re-clocked
SD (YPbPr), HD (YPbPr): SMPTE 292M
HD/3G (YPbPr, RGB): SMPTE 424M/425M with embedded audio

1x Component on 3 BNCs
SD (YPbPr), HD (PbPr)

1x Composite on 2 BNCs
Shared with Composite input by bridge connection with auto termination
1 V (p-p), 75 ohms

1x Analog audio on 2 RCAs
500 mV (rms)
Internal output: 1.0 W + 1.0 W (L/R)
SDI Standards 3G-SDI (Ready): SMPTE424M/SMPTE425M
Dual Link HD-SDI (Ready): SMPTE372M
SD-SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
Embedded Audio: SMPTE299M, SMPTE272M

Displayable 3G-SDI signals: 3G A-1 to A-4 -- Level A mapping structure 1 to 4
3G B-DS1 & B-DS2 -- Level B data stream 1 and 2
3G B-DUAL -- Level B Dual Link
External Control 1x Make/Trigger RJ-45 8-pin
2x RS-485 RJ-45 8-pin In/Out
1x RS-232C D-sub 9-pin
Operating Temperature 41 to 95°F (5 to 35°C)
Operating Humidity 20 to 80% non-condensing
Storage Temperature -4 to 140°F (-20 to 60°C)
Power Requirements AC 120/220-240 V, 50/60 Hz/DC 12-17 V
Rated Current AC: 0.6 A (120 V), 0.4A (220-240 V)
DC: 4.0 A (12-17 V)
Dimensions With stand: 16.9 x 13.8 x 7.9" (43 x 35 x 20 cm)
Without stand: 16.9 x 11.8 x 3.9" (43 x 30 x 10 cm)
Weight With stand: 15.6 lb (7 kg)
Without stand: 11.9 lb (5.4 kg)

facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.