Passive 10-inch 2-Way Loudspeaker

Featuring legendary Mackie sound quality and durability, the lightweight C Series 2-way Precision Passive loudspeakers deliver optimum performance in portable PA, stage monitor and permanent installation applications. The Mackie C-200 is a full-range portable loudspeaker providing high-output, ultra-wide dispersion and low-distortion performance in a compact, composite molded enclosure. A heat-treated titanium compression driver directs pristine highs through an exponential high-frequency waveguide, allowing for ultra-wide dispersion of highs and mids. This allows the C 200 to deliver clear, smooth sound to audience members up to 45° off axis.

The custom-designed high-power 10-inch woofer with a 2-inch voice coil allows the driver to run cooler, delivering consistent performance even after long hours of use at near peak volumes. The crossover in the C200 is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C-200 loudspeakers offer natural sound at all volume levels.

The center of gravity, handle locations, handle design, position of fly-points and ease of use have been ergonomically designed. There is also an integrated pole mount on the bottom of the cabinet and a weather-resistant steel grille. The asymmetrical trapezoidal cabinet has been designed to provide an ideal floor monitoring position. The cabinet is constructed of high-pressure injected polypropylene. The enclosure features reinforcement ribbing and structural strengthening resulting in a strong, super-rigid design providing ideal acoustical characteristics.

→ Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
→ Wide, even dispersion pattern means everyone in the audience hears great sound
→ Asymmetrical cabinet design for best acoustical response
→ Integrated low-impedance compensated crossover and transducer protection
→ Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
→ 500W peak power handling at 8 ohms
→ Passive version of the best-selling SRM350

Acoustic Performance
Frequency Response (–3 dB)	89 Hz-20 kHz
Frequency Range (–10 dB)	59 Hz-22 kHz
Max SPL long-term	118 dB @ 1 m
Low-Frequency Crossover Type	6 dB / octave, time offset corrected
High-Frequency Crossover Type	12 dB / octave
Crossover Point	1800 Hz
Audio
Input / Thru Connector Type	Speakon™-style NL-4 jack; 1/4" TS jack
Input Impedance	8 ohms
Power Handling
RMS	200 watts
Music	350 watts
Peak	500 watts
Operating Temperature Range	–10° C to 45° C (14° F to 113° F)
Low-Frequency Transducer
Diameter	10 in / 250 mm
Voice Coil Diameter	2 in / 51 mm
Magnet Material	Ferrite
High-Frequency Transducer
Diaphragm Diameter	1.4 in / 36 mm
Diaphragm Material	Heat treated titanium
Horn Exit Diameter	1 in / 24.5 mm
Horn Design
Type	Conical and Exponential
Mouth Size	12 in / 305 mm (W) x 7 in / 178 mm (H)
Horizontal Coverage	90° (1 kHz - 20 kHz)
Vertical Coverage	80° (1 kHz - 20 kHz)
Safety Features
Driver Protection	Dynamic protection for compression driver
Construction Features
Basic Design	Asymmetrical Trapezoidal
Material	Polypropylene
Finish	Black, textured finish
Handles	One on right side, one on top
Grille	Perforated metal with weather-resistant coating
Physical Properties (packaged product)
Height	21.5 in / 546 mm
Width	13.2 in / 335 mm
Depth	12.4 in / 315 mm
Shipping Weight	30.0 lb / 13.6 kg
Physical Properties (product)
Height	20.8 in / 527 mm
Width	13.1 in / 333 mm
Depth	12.3 in / 311 mm
Net Weight	26.0 lb / 11.8 kg
Mounting Methods	Floor mount, pole mount, or fly via optional bracket
Three setup configurations	pole mount, flyable and wedge