New 1080p Cased HD Camera, SDI Output

• 1080p HD Resolution

• 1/2.8" CMOS Sensor

• HD-SDI Direct Connect to Monitor Output

Imager

1/2.8" 230Mega pixel CMOS (SONY: IMX136), Rolling Shutter

Active Picture Element

1936 (H) x 1096(V)

HD Active Picture Element

1920 (H) x 1080 (V)

Optical Size

5.44 (H) x 3.09 (V) mm

Cell Size

2.8 (H) x 2.8 (V) µm

Scanning Method

Progressive

Minimum Scene Illumination

TBD

Sync System

Internal

Video Output

-

- DVI Model

DVI 1.0 conformity RGB, 1080P60,1080P59.94, 1080P50, 1080P30,1080P29.97, 1080P25, 720P60, 720P59.94, 720P50 (Defalut:1080P60)

- SDI Model

3G-SDI(SMPTE424M Compliant), 4:2:2 YCbCr 10bit 1080P60/59.94/50 HD-SDI (SMPTE292M Compliant) 4:2:2 YCbCr 10bit 1080P30/29.97/25 720P60/59.94/50

ALC

Can be configured via the UART communication with auto electronic shutter and AGC

Shutter Speed

Adjustable shutter speed via the UART communication (AEE)　　(Default: Auto)

- Extended

Extend shutter frame unit (Up to2.55 sec)

- High Speed

Up to 1/10,000 seconds

Gain

AGC or Fixed gain selectable via the UART communication 0 to 45 dB

Gamma

Selectable gamma through 5 preset (one preset is manual, / 0.45 / 0.6 / 0.8 / 1) Selectable gamma via the UART communication (Default: manual)

White Balance

Auto white balance / manual white balance / push to set white balance Selectable white balance via the UART (Default: Auto white balance)

Wide Dynamic Range

Wide Dynamic Range OFF/ON (Defalut:OFF) WDR enable via the UART communication

Mirror Image

Normal image / horizontal flip / vertical flip / horizontal vertical flip(180 degree rotation) Default: Normal image

Picture Modes

8 user preset mode, Normal picture mode or pseudo color mode can be selectable Selectable picture mode via the UART communication (Default: Preset 0)

Line Generator

Both horizontal and vertical with all available colors (Line number: 2) Adjustable thickness via the UART communication ( Default: Disable)

Shadow Mask Generator

Both horizontal and vertical with shading level adjustment via the UART communication( Default: Disable)

Freeze Image

Selectable Live image or freeze image via the UART communication

Communication

+3.3V UART communication via 3.5Φ stereo jack （Baud rate: 38,400bps, 19,200bps, 9,600bps

Character Generator

Built-in character generation function via the UART communication

Pixel Blemish Collection

Support

Power

- Input Voltage

+9 to +15 Vdc (Typical: +12 Vdc)

- Consumption

4.4W(preliminary)

Dimensions

40 (W) x 40 (H) x 51.1(D) mm (Excluding the connector)

Optical Filter

IR cut filter with OPLF

Material

Aluminum (AC)

Lens Mount

C mount (Recommendation F: more than 2.0))

Interface Connector

- Video Output

DVI Output：HDMI connector,SDI Output：BNC connector

- Power Input

+9 to +15 Vdc (Typical: +12 Vdc)

- External Control

3.5Φ stereo jack with SW board

- Communication

3.5Φ stereo jack

Weight

Approximately 116g

Operating Temperature

-0 to 40 deg. C

Storage Temperature

-30 to 65 deg. C

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each)

Shock

Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55022 (Class B)

RoHS

RoHS compliance