Search

5MP C-MOS USB 3.0, B/W, w/ full triggering

Sentech - STC-MBA5MUSB3 View Larger Image (in new window)

Sentech : STC-MBA5MUSB3

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

 Sentech is proud to present the STC-MBA5MUSB3, a member of the brand new USB 3.0 camera series. The monochrome CMOS USB 3.0 camera is available in a 1/2.5" CMOS sensor with a 5MP to VGA scalable resolution and 14 to 123 FPS. This low cost, high performance camera is compatible with all standard industry drivers, and comes with the Sentech Viewing Software and SDK.

STC-MBA5MUSB3 features include:

  • 1/2.5" CMOS Sensor
  • 5 Megapixel to VGA Scalable Resolution
  • Low Cost

Image Sensor

1/2.5" 5Mpixel CMOS; (Aptina: MT9P031/12STM)

Active Picture Element

2592 (H) x 1944 (V)

Cell Size

2.2 (H) x 2.2 (V) µm

Scanning System

Progressive

Shutter Type

Rolling Shutter

Scanning Methods

Full Scanning, Variable AOI (Horizontal/Vertical)

Maximum Frame Rate

-

- 14 fps @

QSXGA (2592 x 1944)

- 21 fps @

QXGA (2048 x 1536)

- 31 fps @

UXGA (1600 x 1200)

- 42 fps @

SXGA (1280 x 1024)

- 63 fps @

XGA (1024 x 768)

- 90 fps @

SVGA (800 x 600)

- 123 fps @

VGA 6540 x 480)

Sync System

Internal

Video Output

RAW 8bit/10bit/12bit

S/N Ratio

≤ 4 Digit (Gain 0 dB)

Minimum Scene Illumination

0.3 Lux @ F1.2

ALC

Auto Shutter/ Auto Gain

Electronic Shutter

Free-run Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Edge Preset Trigger Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Pulse-width Trigger Mode: Exposure Time -- 32 µsec to unlimited (in full scanning mode)

Gain

-

- Analog

0 to 26.97 dB

- Digital

0 to 12.04 dB

Digital Clamp

0 to 255 (LSB of 12bit output)

Gamma

0.1 to 4.0 (settable with 0.1 step)

AOI Function

AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines); Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction

Binning

Horizontal 1/2, 1/4 Vertical 1/2, 1/4  *Only pixels in the horizontal direction can be added to increase the brightness.

Skipping

Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8

Mirror Image

Horizontal / Vertical / Horizontal and Vertical

Pixel Blemish Correction

Up to 64 pixels (This function is turned off at shipping.)

White Balance

N/A

Operation Mode

Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger

Frame Memory

1 frame (2592 x 1944)

Input / Output

USB 3.0 Super Speed (USB 3.0 Micro B)

Power

-

- Input Voltage

+5V (typ.) (Conform to USB Standard)

- Consumption

Less than 2.0 W

Dimensions

28 (W) x 28 (H) x 33.8 (D) mm (excluding connector)

Lens Mount

CS Mount

Optical Filter

No IR Cut Filter

Optical Center Accuracy

Positional accuracy in H and V directions: +/- 0.5 mm Rotational accuracy of H and V: +/- 0.35 deg.

Weight

Approximately 38 g

Interface Connector

USB: USB3 Micro-B USB connector; IO signal: 6pin connector (HR10A-7R-6PB or equivalent) (2 inputs / 2 outputs)

Operating Temperature

0 to 40 deg. C

Storage Temperature

-30 to 65 deg. C

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each

Shock

Acceleration 38G, half amplitude 6ms, 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011

RoHS

RoHS compliant



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.