Call Now: 1-800-284-2288 |
(discontinued)4K DigitalMedia 8G+ Receiver & Room Controller 100 |
|
|
This product is discontinued. Recommended replacement DM-RMC-4KZ-100-C
The DM-RMC-4K-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+™ receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232, and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to an HDBaseT certified source. Its compact, low-profile design allows the DM-RMC-4K-100-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT type twisted pair cable.[1]
DM-RMC-4K-100-C features include:
Maximum Wire Lengths | |||||
Cable Type: | DM-CBL-8G DigitalMedia 8G™ Cable |
CAT5e (or better) UTP or STP [1] |
|||
Common Resolutions |
1080p60 Full HD | 330 ft (100 m) | 330 ft (100 m) | ||
1920x1200 WUXGA | |||||
1600x1200 UXGA | |||||
2048x1080 2K DCI | |||||
2560x1440 WQHD | 230 ft (70 m) | 165 ft (50 m) | |||
2560x1600 WQXGA | |||||
3840x2160 Ultra HD | |||||
4096x2160 4K DCI | |||||
Video | |||||
Input Signal Types | DM 8G+™ (DigitalMedia™ over one CAT type twisted pair copper wire), HDBaseT® [1] | ||||
Output Signal Types | HDMI®, DVI[2] | ||||
Formats | DM 8G+, HDBaseT, & HDMI w/Deep Color, 3D, & 4K; DVI; HDCP content protection support | ||||
Maximum Resolutions | Scan Type | Maximum Resolution | Frame Rate | Color Sampling | |
Progressive | 4096x2160 4K DCI | Up to 24 Hz | 4:4:4 | ||
Progressive | 3840x2160 Ultra HD | Up to 30 Hz | 4:4:4 | ||
Progressive | 2560x1600 WQXGA | Up to 60 Hz | 4:4:4 | ||
Progressive | 4096x2160 4K DCI | Up to 60 Hz | 4:2:0 [5] | ||
Progressive | 3840x2160 Ultra HD | Up to 60 Hz | 4:2:0 [5] | ||
Interlaced | 1920x1080 1080i30 | Up to 30 Hz | 4:4:4 | ||
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz | |||||
Audio | |||||
Input Signal Types | DM 8G+, HDBaseT | ||||
Output Signal Type | HDMI | ||||
Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM | ||||
Communications | |||||
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | ||||
RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking | ||||
IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud | ||||
DigitalMedia | DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet | ||||
HDBaseT | HDCP, EDID, PoH, Ethernet | ||||
HDMI | HDCP, EDID, CEC | ||||
NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between HDMI sink and a control system | |||||
Connectors | |||||
HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[2] |
||||
COM | (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support |
||||
IR 1 – 2 | (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud |
||||
LAN | (1) 8-wire RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port |
||||
Ground | (1) 6-32 screw, chassis ground lug | ||||
DM IN | (1) 8-pin RJ45 female, shielded; DM 8G+ input, HDBaseT compliant; PoDM and PoH PD (Powered Device) port[3]; Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[1] |
||||
24VDC 0.75A MAX | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included |
||||
Controls & Indicators | |||||
HDMI OUT | (1) green LED, indicates video signal presence at the HDMI output | ||||
LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | ||||
DM IN | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence | ||||
RESET | (1) miniature recessed pushbutton, for hardware reset | ||||
SETUP | (1) red LED and (1) miniature recessed pushbutton, for Ethernet setup | ||||
24VDC | (1) green LED, indicates operating power supplied via PoDM, PoH, or local power pack | ||||
Power Requirements | |||||
Power Pack | 0.75 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included |
||||
Power over DM (PoDM) | PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[6] | ||||
Power over HDBaseT (PoH) | PoH PD (Powered Device), capable of being powered by a PoH PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[6] | ||||
Note: May be powered via power pack or PoDM/PoH, not both. | |||||
Environmental | |||||
Temperature | 32° to 104°F (0° to 40°C) | ||||
Humidity | 10% to 90% RH (non-condensing) | ||||
Heat Dissipation | 29 BTU/Hr | ||||
Enclosure | |||||
Chassis | Metal, black finish, with (2) integral mounting flanges, vented top and bottom | ||||
Mounting | Freestanding, surface mount, or attach to a single rack rail | ||||
Dimensions | |||||
Height | 6.09 in (155 mm) | ||||
Width | 5.68 in (145 mm) | ||||
Depth | 1.02 in (26 mm) | ||||
Weight | |||||
16.5 oz (468 g) |
dm-rmc-4k-100-c.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|