Call Now: 1-800-284-2288 |
3-Series Control System |
|
|
|
|
The Crestron PRO3 presents a new benchmark in control system technology. Featuring the 3-Series™ control engine, the PRO3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable. The PRO3 features an enhanced feature set including a front panel color LCD display, built-in control card expansion slots, and a dedicated Control Subnet port.
PRO3 features include:
- Next generation control system
- 3-Series™ Control Engine — substantially faster and more powerful than other control systems
- Exclusive modular programming architecture
- Onboard 1GB RAM & 4GB Flash memory
- Expandable storage up to 1TB
- Rear panel memory card slot
- High-speed USB 2.0 host port
- Industry-standard Ethernet and Cresnet® wired communications
- Control Subnet — provides a dedicated local network for Crestron® devices
- XPanel with Smart Graphics™ computer and Web based control
- iPhone®, iPad®, Android™, and Samsung Smart TV® control app support
- Crestron Fusion™ Enterprise Management Software support
- SNMP support
- Two RS-232/422/485 COM ports with hardware and software handshaking
- Four RS-232 COM ports with software handshaking only
- 8 IR/serial, 8 relay, and 8 Versiport I/O ports
- Three built-in 3-Series™ control card expansion slots
- Native BACnet®/IP support[2]
- IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections[4]
- Installer setup via front panel, Crestron Toolbox™ or Internet Explorer®[3]
- Backwards compatible to run existing SIMPL programs
- Full Unicode (multi-language) support
- Increased network throughput and security
- Secure access though Active Directory integration or standalone account management
- Hardware level security using 802.1x authentication
- IIS v.6.0 Web Server
- IPv6 ready
- Front panel color LCD display for setup and diagnostics
- Front panel USB computer console port
- 2-space rack-mountable
| Control Engine | ||
| 3-Series™; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs | ||
| Memory | ||
| SDRAM | 1 GB | |
| Flash | 4 GB | |
| Memory Card | supports SD™ and SDHC™ cards up to 32 GB | |
| External Storage | support USB mass storage devices up to 1 TB | |
| Communications | ||
| Ethernet | 10/100/1000 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; industry-standard TCP/IP stack; UDP/IP; CIP; DHCP; SSL; IEEE 802.1X; SNMP; BACnet®/IP[2]; IPv4 or IPv6; Active Directory authentication; IIS v.6.0 Web Server; SMTP e-mail client; installer setup via Crestron Toolbox™ or MSIE[3] | |
| Control Subnet | 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode | |
| Cresnet® | Cresnet master mode | |
| USB | Supports USB HID and USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port | |
| RS-232/422/485 | For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 | |
| IR/Serial | Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
| Connectors & Card Slots | ||
| S1 – S3 | (3) 3-Series™ control card expansion slots | |
| COM 1 – 2 | (2) 5-pin 3.5mm detachable terminal blocks; Bidirectional RS-232/422/485 ports[4]; Up to 115.2k baud; hardware and software handshaking support |
|
| COM 3 – 6 | (4) 3-pin 3.5mm detachable terminal blocks; Bidirectional RS-232 ports[4]; Up to 115.2k baud; software handshaking support |
|
| IR - SERIAL OUTPUT 1 – 8 | (2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
|
| RELAY OUTPUT 1 – 8 | (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
|
| LAN | (1) 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port[4]; Connects to the customer's LAN |
|
| CONTROL SUBNET | (1) 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port[4]; Provides a dedicated local network for Crestron devices |
|
| USB | (1) USB Type A female; USB 2.0 port for storage devices |
|
| MEMORY | (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion |
|
| I/O 1 – 8 | (1) 9-pin 3.5mm detachable terminal block comprising (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k ohms with pull-up resistor disabled; Programmable 5 Volts, 2k ohms pull-up resistor per pin |
|
| NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices[4]; See "Power Requirements" for additional specifications |
|
| 100-240V~2.4A 50/60Hz | (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included |
|
| G | (1) 6-32 screw, chassis ground lug | |
| COMPUTER (front) | (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only |
|
| LCD Display | ||
| Display Type | TFT active matrix color LCD | |
| Size | 2.8 inch (72 mm) diagonal | |
| Resolution | 320 x 240 pixels | |
| Functions | Displays configuration menus, control port activity, and other system information | |
| Controls & Indicators | ||
| PWR | (1) Green LED, indicates operating power supplied from AC line | |
| NET | (1) Amber LED, indicates communication with the Cresnet system | |
| MSG | (1) Red LED, indicates control system has generated an error message | |
| HW-R | (1) Recessed pushbutton for hardware reset | |
| SW-R | (1) Recessed pushbutton for software reset | |
| CNPS FAULT | (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication | |
| SLOT 1 – 3 | (3) Green LEDs, indicate control cards are inserted in the corresponding slots | |
| Nav Pad | (1) 5-way navigation pad for menu navigation and parameter adjustment | |
| HOME | (1) pushbutton, returns to the home menu | |
| BACK | (1) pushbutton, steps menu back one level | |
| LAN (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity | |
| CONTROL SUBNET (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity | |
| Power Requirements | ||
| Main Power | 2.4 Amps @ 100-240 Volts AC, 50/60 Hz | |
| Available Cresnet Power | 75 Watts (3.125 Amps @ 24 Volts DC) | |
| Environmental | ||
| Temperature | 41° to 113°F (5° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | 45 BTU/Hr with no Cresnet devices, no control cards; 71 BTU/Hr with full Cresnet load, no control cards; See individual control card spec sheets for additional specifications |
|
| Enclosure | ||
| Chassis | Metal, black finish, vented top and sides | |
| Faceplate | Extruded metal, black finish, polycarbonate label overlay | |
| Mounting | Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 3.47 in (89 mm) without feet | |
| Width | 17.28 in (439 mm), 19.00 in (483 mm) with rack ears | |
| Depth | 10.13 in (258 mm) | |
| Weight | ||
| 5.0 lb (2.3 kg) | ||
| pro3.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.