Call Now: 1-800-284-2288 |
(discontinued)USB over Twisted Pair Extender |
|
|
This product has been discontinued. Recommended replacement USB-EXT-2
The Crestron® USB over Twisted Pair Extender (USB-EXT) delivers reliable USB signal extension for use in a boardroom, classroom, auditorium, command center, or residence. Without any special setup or configuration, the USB-EXT enables wire runs up to 100 meters (330 feet) over a single, low-cost twisted-pair cable[1].
Available Configurations Include:
USB-EXT-DM-LOCAL | USB over Ethernet Extender with Routing, Host Module |
USB-EXT-DM-REMOTE | USB over Ethernet Extender with Routing, 4-Port Device Module |
USB-EXT features include:
Communications | ||
Link | USB extension up to 330 ft (100 m) over UTP or STP cable[1] | |
USB Device Support | USB 1.1 and 2.0 compatible including 1.5 Mb/s low speed, 12 Mb/s full speed, and 480 Mb/s high-speed devices[2] | |
USB Hub Support | Any signal chain may include up to 3 USB hubs plus one USB-EXT[2] | |
Maximum USB Devices | 14 USB devices, or 3 USB hubs with 11 USB devices | |
USB Host Support | EHCI (USB 2.0) and OHCI/UHCI (USB 1.1) | |
Connectors – Local Extender | ||
Ground | (1) M2 threaded hole; Accepts an M2 type screw to provide a chassis ground lug |
|
DC IN 24V@1A | (1) 2.1 mm barrel DC power jack; 24 Volt DC power input (power pack included) |
|
USB | (1) USB Type B female (cable included); USB 2.0 device port for connection to the USB host interface |
|
Link | (1) 8-pin RJ45 female, connects to Link port on the Remote Extender[1] | |
Connectors – Remote Extender | ||
USB | (2) USB Type A female, USB 2.0 host ports; For connection of USB mice, keyboards, game controllers, cameras, mobile devices, printers, memory, hubs, and other USB devices[2]; Available Power: 500 mA @ 5 Volts DC per port |
|
Ground | (1) M2 threaded hole; Accepts an M2 type screw to provide a chassis ground lug |
|
Link | (1) 8-pin RJ45 female, connects to Link port on the Local Extender[1] | |
Indicators – Local Extender | ||
Power | (1) Blue LED, indicates operating power supplied via local power pack | |
Link | (1) Green LED, indicates a valid Link connection to the Remote Extender | |
Host | (1) Green LED, indicates a valid connection to the USB host | |
Activity | (1) Amber LED, indicates data activity on the Link interface | |
Indicators – Remote Extender | ||
USB | (2) Green/orange dual-color LEDs, green indicates a valid USB device connection and orange indicates a current draw in excess of 500 mA at the respective USB port | |
Power | (1) Blue LED, indicates operating power supplied from the Local Extender via the Link connection | |
Link | (1) Green LED, indicates a valid Link connection to the Local Extender | |
Host | (1) Green LED, indicates a valid connection to the USB host at the Local Extender | |
Activity | (1) Amber LED, indicates data activity on the Link interface | |
Power Requirements | ||
Power Pack | 1 Amp @ 24 Volts DC 600 mA @ 100-240 Volts AC, 50/60 Hz power pack (included)[3] | |
Environmental | ||
Temperature | 32° to 122°F (0° to 50°C) | |
Humidity | 20% to 80% RH (non-condensing) | |
Enclosure (Typical of 2) | ||
Construction | Metal, black finish | |
Dimensions (Typical of 2) | ||
Height | 1.02 in (26 mm) | |
Width | 3.94 in (100 mm) | |
Depth | 2.99 in (76 mm) |
usb-ext.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|