Teledyne FLir BFS-PGE-04S2C-CS Blackfly S Color 0.4 MP GigE Vision (Sony IMX287)

The FLIR Blackfly S Color BFS-PGE-04S2C-CS combines the newest CMOS image sensors with our new and intuitive Spinnaker software development kit. The many new advanced camera features are designed to meet your complex imaging needs and speed up development time.

The BFS-PGE-04S2C-CS is ideal for high-speed applications where frame rate is more important than resolution, or where the target area is small. The Pregius IMX287 is a 720 x 540, 1/2.9”, 6.9 μm global shutter device which that can capture high -quality images at 291 FPS. It is an ideal drop-in replacement for the ICX424 while offering higher quantum efficiency, and dynamic range, and lower read noise.

For a monochrome alternative, please see BFS-PGE-04S2M-CS

Leverage the latest CMOS sensors and new on-camera image processing features. Harness increased binning flexibility, powerful auto-exposure controls and robust color transformation tools.

Improve cycle time using advanced camera controls and programmable logic Utilize sequencer, chunk data, event notification, counters, timers and logic blocks.

Accelerate your time to market using our GenICam3 API, GUI API library, detailed API logging and comprehensive documentation.

IEEE 1588 Precision Time Protocol for accurate clock synchronization with no user oversight.

BFS-PGE-04S2C-CS

Resolution 720 x 540

Frame Rate* 291 FPS

Megapixels 0.4 MP

Chroma  Color

Sensor Sony IMX287, CMOS, 1/2.9"

Readout Method Global shutter

Pixel Size 6.9 μm

Lens Mount CS-mount

ADC 8-bit, 10-bit, and 12-bit

Minimum Frame Rate** 1 FPS

Gain Range** 0 to 47 dB

Exposure Range** 4 μs to 30 s

Acquisition Modes Continuous, Single Frame, MultiFrame

Partial Image Modes Pixel binning, decimation, ROI

Image Processing  Color correction matrix, gamma, lookup table, saturation, and sharpness

Sequencer Up to 8 sets using 2 features

Image Buffer 240 MB

User Sets 2 user configuration sets for custom camera settings

Flash Memory 6 MB non-volatile memory

Opto-isolated I/O 1 input, 1 output

Non-isolated I/O 1 bi-directional, 1 input

Auxiliary Output 3.3 V, 120 mA maximum

Interface GigE PoE

Power Requirements Power over Ethernet (PoE), or 12 V nominal(8 - 24 V) via GPIO

Power Consumption 3 W maximum (2.8 W nominal)

Dimensions/Mass 29 mm x 29 mm x 30 mm / 36 g

Machine Vision Standard Gige Vision v1.2

Compliance CE, FCC, KCC, RoHS, REACH. The ECCN for this product is: EAR099.

Temperature Operating: 0°C to 50°C Storage: -30°C to 60°C

Humidity Operating: 20%to 80%(no condensation) Storage: 30%to 95%(no condensation)

Warranty 3 years

*Frame rates are measured with Device Link Throughput Limit of 125 MBps and Acquisition Frame Rate disabled. Values are rounded down to whole numbers.

**Values are the same in binning and no binning modes.