Compact, Indoor/Environmental, IP-Enabled Camera Enclosure

The EH20 Series is a rugged and highly reliable camera enclosure with a side-hinged lid and adjustable sun shroud designed for easy installation. Constructed from die-cast aluminum to IK10 and IP66, the EH20 Series enclosure is designed to operate in a wide range of environments and to protect electronic components in temperatures from –30° to 50°C (–22° to 122°F). The EH20 Series enclosure is designed for use with analog and IP cameras that have both fixed and variable focal length lenses (with or without auto iris operation). The side-hinged lid provides easy access to the camera sled. Two adjustable glands (PG11) on the bottom of the enclosure allow for easy installation of the power and video cables. All EH20 Series enclosures come standard with heater and blower (except EH20 and EH20-M), a cable management wall mount bracket, and sun shroud (except EH20). The enclosure can also be ordered from the factory with 110 to 230 VAC Mains, 24 VAC, or Power over Ethernet enclosure input voltage, 802.3af-compatible camera power, and appropriate heater and blower power. The EH20 Series is ideal for small- to medium-size analog and IP cameras and can be mounted to Pelco’s EM20 (feedthrough wall mount)

Recommended for use with Sarix Professional and Sarix Enhanced series cameras.

Available configurations:

EH20, Basic Model

EH20M, Includes Wall Mount bracket

EH20-2-H IncludesWall Mount, Heater, and Fan; 24 VAC

EH20-3-H Includes Wall Mount, Heater, and Fan; 110 VAC to 230 VAC

EH20-P-H Includes Wall Mount, Heater, and Fan; PoE+/HPOE

• Side Opening for Easy Access for Servicing and Installation
• High Reliability Die-Cast Construction
• Advanced Optics for Megapixel Camera Support
• Temperature Range from –30° to 50°C (–22° to 122°F)
• Meets IP66 and Type 4X Standards
• IK10 Mechanical Impact Resistance, Vandal Resistant
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• 24VAC or Power Over Ethernet (PoE) or Mains Power Models
• All Models Include Heater and Blower (Except EH20 and EH20-M)
• All Models Include Sun Shroud and Mount (Except EH20)

MECHANICAL

Camera Mounting    Single slot for adjustable camera positioning on camera sled

Camera and Lens    Size Accepts camera and lens combinations (including BNC connector) up to 22.86 x 10.16 x 7.62 cm (9.00" L x 4" W x 3.5" H)

Viewing Window    0.3 cm (0.118-inch) thick, high optic grade, soda lime glass

Viewing Area    8.89 x 7.62 cm (3.5" W x 3" H)

Cable Entry    2 x PG11 compression glands on bottom

Maximum Cable Diameters   PG11 1.00 cm (0.395 in.)

Cable Entry Holes   Both cable entry holes are 1.87 cm (0.74-inch) and will accept PG11 or 3/8-inch NPT conduit fitting as is. Will accept PG13.5 or 1/2-inch NPT fittings if the holes are enlarged to 2.22 cm (0.88-inch).

Lid Fastening  Torx security screws

ELECTRICAL

Input Power 24 VAC or POE+, HPOE, or 110 VAC–230 VAC

Input Voltage

• PoE IEEE802.3at compatible (heaters disabled), HPOE (heaters enabled), PoE output to camera
• 24 VAC ±10%, up to 30W (without camera), up to 43W (with 13W camera), 24 VAC output to camera.
• 110 VAC–230 VAC ±10%, up to 30W (without camera), up to 43W (with 13W camera), 12 VDC output to camera.

Max Power Output to Camera 13W

CERTIFICATIONS

• CE (Class A)
• ICES-003 (Class A)
• UL/cUL Listed
• UL/IEC 60950-22
• Meets Type 4X and IP66 standards
• IK10 Mechanical Impact Resistance (Mechanical enclosure only; not the front window)
• KCC
• RCM

GENERAL

Construction Die-cast aluminum, ADC10

Finish Alodine with gray polyester powder coat, RAL7047

Environment Indoor/environmental ambient temperature –30° to 50°C (–22° to 122°F) Power via PoE+ –10° to 50°C (14° to 122°F)

Unit Length

• Base 17.09 cm (6.73 in) W x 10.90 cm (4.29 in) H x 40.57 cm (15.97 in) L
• Enclosure with Sunshroud 17.09 cm (6.73 in) W x 23.96 cm (9.43 in)
• H and Wall Mount 47.14 cm (18.56 in) L