High power strobed LED backlight, 96x72 illumination area, green, 522 nm, with collimation film in both directions

Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request. Models where two currents are listed (such as LTBP240180-R) feature two separate channels. At 25°C.

Lighting specifications
Modules		2x2
Illumination area width	(mm)	96
Illumination area height	(mm)	72
Number of LEDs		192
Light color, peak wavelength		green, 522 nm
Spectral FWHM	(nm)	33
Illuminance (1)	(klux)	150
Diffuser		yes
Collimation film		yes

Electrical specifications
Power supply mode		Strobe only, constant current driving
Peak power consumption	(W)	241.9
Max pulse current (2)	(A)	7.2
Typical pulse voltage	(V)	33.6
Max pulse duration	(ms)	1
Max duty-cycle	(%)	1.5
Max continuous current	(mA)	20
Estimated MTBF (3)	(hours)	> 50000
Connector		M8
Cables		CBLT003 included

Mechanical specifications
Length	(mm)	108
Width	(mm)	92
Height	(mm)	26
Mass	(g)	542
Clamping system		4x M6 threaded holes

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
IP rating		IP40
Installation		Indoor use only

Eye safety
Risk group according to CEI EN 62471:2010		Exempt