High power strobed LED backlight, 288x72 illumination area, red, 625 nm, with collimation film in both directions

Minimum value, at max driving current, on emitting surface. Where n.a. is reported data is available upon request. Models where two currents are listed (such as LTBP240180-R) feature two separate channels. At 25°C.

Lighting specifications
Modules		6x2
Illumination area width	(mm)	288
Illumination area height	(mm)	72
Number of LEDs		576
Light color, peak wavelength		red, 625 nm
Spectral FWHM	(nm)	20
Illuminance (1)	(klux)	n.a.
Diffuser		yes
Collimation film		yes

Electrical specifications
Power supply mode		Strobe only, constant current driving
Peak power consumption	(W)	202.0
Max pulse current (2)	(A)	10.1
Typical pulse voltage	(V)	20.0
Max pulse duration	(ms)	1
Max duty-cycle	(%)	1.5
Max continuous current	(mA)	60
Estimated MTBF (3)	(hours)	> 50000
Connector		M8
Cables		CBLT003 included

Mechanical specifications
Length	(mm)	300
Width	(mm)	92
Height	(mm)	26
Mass	(g)	880
Clamping system		8x M6 threaded holes

Environmental specifications
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Operating relative humidity	(%)	20-85, non condensing
IP rating		IP40
Installation		Indoor use only

Eye safety
Risk group according to CEI EN 62471:2010		Exempt