(discontinued) Watec WAT-240VIVID 1/4-inch Color Camera

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

This item has been replaced with WAT-240E


Searching for a super minature camera? The Watec WAT-240 VIVID comes in two models: WAT-240-vivid NTSC and the WAT 240 vivid PAL with various lenses available.

Functional settings on the WAT240 VIVID can be set as desired by using the Active Visual Mate(Option) White balance control, Electronic iris, AGC Back light compensation.

Camera Holder

WAT-240VIVID Specications

Pick-up element 1/4 inch interline transfer CCD image sensor
Number of total pixels 811(H) × 507(V)(NTSC), 795(H) × 595(V)(PAL)
Number of effective pixels 768(H) × 494(V)(NTSC), 752(H) × 582(V)(PAL)
Unit cell size 4.9μm(H) × 5.6μm(V)(NTSC), 5.0μm(H) × 4.77μm(V)(PAL)
Imaging system Ye, Cy, Mg, and G complementary color mosaic filters on chip
Synchronizing system Internal
Scanning system 2:1 interlace
Video output Composite video, 1Vp-p, 75ohm Unbalanced
Resolution(Horizontal) More than 450TVL (Center)
Minimum illumination 0.7 lx.(F2.0)
S/N ratio More than 50dB (AGC=6dB, γ=1.0)
AE (Auto-exposure) 1/60 - 1/100000 sec.(NTSC), 1/50 - 1/100000 sec.(PAL)
White balance ATW (2500K - 9500K)
AGC 6 - 30dB
Gamma correction γ≒0.45
Back light compensation ON
Power supply DC 6V±10%
Power consumption 0.99W (165mA)
Operating temperature -10°C ~ 50°C (w/o condensation)
Storage temperature -30°C ~ 70°C (w/o condensation)
Operating / Storage humidity Less than 95% RH
Lens mount M13 P=1.0
Standard lenses G3.8(Glass f3.8 F2.0) / P3.7(Pinhole f3.7 F4.5)
Weight 27g (G3.8)

*Miniature pinhole lenses cannot be interchanged with miniature glass lenses and vis-a-vis.

facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.