XGA Black & White Gigabit Ethernet Camera

The Hitachi KPF83GV is single CCD type camera which utilized the progressive scan CCD image sensor with square pixel for XGA format of 1/3-inch. By adoption of a Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by using hub or switcher, construction of multiple camera system can be easily performed.

The KP F83GV 1/3-inch 800,000 pixels square lattice progressive scan CCD achieve a high resolution of 1024(H) x 768(V) (XGA). High-speed serial interface Gigabit Ethernet supported and direct connection is possible to PC by the diameter cable of thin as compared with parallel output. Cable length can be extended to maximum 100m without hub and switcher. Based on industrial camera interface standard GigE Vision, a maximum of 1 Gbps high speed data transmit is available and suitable for image processing. An external trigger signal input can be used to capture an image at desired timing for instantview or processing. The software trigger via a Gigabit Ethernet cable and the hardware trigger can deal with all trigger signals.

Imaging device	1/3-inch progressive scan interline CCD (with on-chip microlenses)
Total number of pixels	1077(H) x 788(V)
No. of effective pixels	1034(H) x 779(V)
Unit cell size	4.65(H) x 4.65(V) um (Square pixel)
Scanning system	Progressive scan
Frame rate	36 fps (for all image format)
Sync system	Internal/external
Lens mount	C mount
Interface	Gigabit Ethernet
Protocol	GigE Vision compliant
Transfer rate	1 Gbit per second
Image format	Mono 8/10bit
Image size	1024(H) x 768(V)
External sync signal	VD output: 5Vp-p plus minus 0.3V; Strobe out: 5Vp-p plus minus 0.3V
Standard sensitivity	2000lx F5.6
Electric shutter speed	Auto (AES) / Manual (VARIABLE); From 10 second to approx. 1/100,000 second
External trigger shutter	Mode Fixed shutter; One trigger; VD Sync
Input	Via Gigabit Ethernet cable (Software trigger) 12-pin connector (Hardware trigger)
Input level	5Vp-p plus minus 1V
Auto Exposure (ALC	Auto level control): Adjustable for video level
Gain	Auto / Manual (0dB to 18dB)
Gamma	OFF / ON
Sharpness	Adjustable
Brightness	Adjustable
Power supply	DC 12V plus minus 1V
Power consumption	Approx. 3.2W (DC 12V)
Note	If operated continuously, be sure to use at less than 40 ℃(104F) for long term stable performance.
Storage	-20°C to 60°C / 20 to 90 %RH
Vibration endurance	68.65 m/s2 or less (10 to 200Hz, 30 minutes each on XYZ axes)(Do not subject to strong vibration for long periods of time.)
Shock endurance	490.3 m/s2 or less (vertical, horizontal, once each face)
External dimensions	44(W) x 29(H) x 72(D) mm (not including lens and protrusions)
Mass	Approx. 140g (without lens)
Camera remote	Gigabit Ethernet control
Supplied equipment	Camera CD-ROM (Operation manual / Driver soft)
Optional accessories	LAN cable (Enhanced category 5 or Category 6)