Sensor | 1/3" CMOS
|
Viewer Display | 1280 x 1024 max
|
Max Frame Rates (Uncompressed) | 7.5 fps @ SXGA (1280 x 1024); 12fps @ XGA (1024 x 768); 25fps @ VGA (640 x 480)
|
Sensitivity | < 2.0 Lux (50 IRE) F1.2, 3200K, lens transmission 80%, scene refl ection 75%
|
Signal to Noise Ratio | >45 dB (AGC off)
|
Gamma | 0.45 default (1.0 via software)
|
Gain Control | Automatic 36 dB (AGC default) or Fixed options via software
|
Scan Mode | Progressive scan
|
Mirror Mode | Yes (horizontal/vertical)
|
Shutter Mode | Rolling shutter
|
Control Communication | Camera control via USB bus
|
Syncronization | Internal
|
Back Light Compensation | Default on (selectible via software)
|
White Balance Mode | AWB auto white mode, Fixed modes selectable via software
|
Contour Enhancement | Default on
|
Iris Control | Electronic shutter
|
Shutter Speeds | Automatic Fixed (NTSC) 1/12 to 1/100; Fixed (PAL) 1/15 to 1/120; Video Output USB 2.0
|
Power Supply | 5VDC via USB 2.0 bus
|
Power Consumption | < 0.6W
|
Dimensions W x H x D | 50mm x 50mm x 49.6mm (without lens mount) (1.97" x 1.97" x 1.95")
|
Cable | Integrated 8.2 ft USB cable
|
Operating Temperature | -15o C ~ 55o C (5o F ~ 131o F)
|
Operating Humidity | 20% up to 93%RH
|
Storage Temperature | -25o C ~ 70o C (-13o F ~ 158o F)
|
Storage Humidity | Up to 98%RH
|
Lifetime MTBF | > 150000
|
Viewer (included) SFT-07019 | WDM device drivers; DirectX/DirectShow compliant; TWAIN compliant (requires driver installation)
|
SDK (optional) SFT-07019-SDK | Complete software development kit and support for OEMs
|
Pentium IV | 2.3GHz , 1GB hard drive, Intel USB 2.0 Host controller
|
Windows 7 | 32 bit and 64 bit
|
Windows Vista | 32 bit and 64 bit
|
Windows XP | Service pack 2 , DirectX 9.0c or above
|
Government Compliance | FIPS 201; In conjunction with appropriate software
|
Standards | RoHS |