The Bosch LTC 4642/00 850NM FOM, RECEIVER, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant Series of...

The Bosch LTC 4651/00 850NM FOM, TRANSMITTER/RECEIVER, BIPHASE OR RS-232 DATA, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant...

The Bosch LTC 4671/00 850NM FOM, TRANSMITTER/RECEIVER, RS-485 DATA, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant Series of...

The Bosch LTC 4745/00 1310NM FOM, RECEIVER, 4 CHANNEL, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK with Surface-mount or rack-mount units and Data communication link supports...

The Vicon VF-100R VIDEO RECEIVER with 12 dB, multimode fiber, Multimode, NTSC/PAL, and comes with Power Supply

Available Configurations...

The Vicon VF-30R VIDEO RECEIVER with 3-channels, 13 dB, multimode fiber, and comes with rack mount. This receiver has Bi-Color LED Indicators, 640 TV Lines at 8MHz Bandwidth, and...

The Marshall Electronics WP-1 Wireless HDMI Transmitter Receiver System without battery plate features a range of up to 100' line-of-sight with less than 1 millisecond of latency,...

The Marshall Electronics WP-1C Wireless HDMI Transmitter Receiver System with dual Canon LP-E6 type battery plates features a range of up to 100' line-of-sight with less than 1...

The Marshall Electronics WP-1N Wireless HDMI Transmitter Receiver System with dual Nikon EN-EL3 type battery plates features a range of up to 100' line-of-sight with less than 1...

The WP-1P Wireless HDMI Transmitter Receiver System with single Panasonic VW-VBG6 type battery plate from Marshall Electronics features a range of up to 100' line-of-sight with...

The WP-1S Wireless HDMI Transmitter Receiver System with single Sony NP-F970 type battery plate from Marshall Electronics features a range of up to 100' line-of-sight with less...

The WP-2C Wireless HDMI Transmitter Receiver System with dual Canon LE-E6 type battery plates from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

The WP-2N Wireless HDMI Transmitter Receiver System with dual Nikon EN-EL3 type battery plates from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

The WP-2P Wireless HDMI Transmitter Receiver System with single Panasonic VW-VBG6 battery plate from Marshall Electronics features stick-style HDMI dongle transmitter that can...

The WP-2S Wireless HDMI Transmitter Receiver System with single Sony NPF970 type battery plate from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

 Ganz NVT Module for 5000 Series Domes

The TV One 1T-CT-642 HDMI Receiver forms the HDMI over single CAT5e/CAT6 system when coupled with the 1T-CT-641 Transmitter (sold separately). It supports the...

The Tv One 1T-CT-653/1T-CT-654A HDMI over Single Cat.5e/Cat.6 system consists of a 1T-CT-653 Transmitter coupled with a 1T-CT-654A Receiver (each purchased...

The Azden 2000URX is a Broadcast Spec True Diversity Receiver with a digital display in a portable/table top diecast metal case. It operates on 4 “AA” batteries and is also...

Receiver Type	True Space Diversity, Double Super Heterodyne
Sensitivity	0.8uV
Reference Deviation	/- 5 kHz
Noise Reduction	Proprietary Compander
Signal to Noise Ratio	>100dB

Geovision 400-IOB08-080 GV-IO Box 8 provides 8 inputs and 8 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

Geovision 400-IOB04-040 GV-IO Box 4 provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

Geovision 400-IOB08-08E GV-IO Box 8 provides 8 inputs and 8 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

Geovision 400-IOB16-160 GV-IO Box 16 provides 16 inputs and 16 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

The 611T and 611-R are a high-performance fiber optic transmitter and receiver for composite video signals. The 611T transmitter converts a composite video signal into a fiber...

→ Input	Fiber optic ST connector
→ Output	Composite Video 1Vpp/75Ω on a BNC connector
→ Operation Distance	Up to 5km (MultiMode)
→ Video Bandwidth (-3dB)	55 MHz. 20 MHz
→ Diff. Gain	0.4%

The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at...

The 616T and 616R are a small and lightweight, detachable fiber optic transmitter and receiver pair. They transmit uncompressed resolutions of up to WQXGA...

The 621R is an optical receiver for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the optical...

→ Input	4 LC optical connectors for R, G, B & clock. 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
→ Output	DVI-D on a DVI-I connector
→ Bandwidth	1.65Gbps
→ Power Source	12V DC, 1.25A
→ Dimensions	12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H

The 622T and 622R are an optical transmitter and receiver pair for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an optical...

→ Input	8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue, & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
→ Output	DVI-D on a DVI-I connector
→ Bandwidth	3.3Gbps
→ Power Source	12V DC, 200mA
→ Dimensions	21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H

The 650R is a high-performance receiver for DVI, RS-232, and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them back...

→ Inputs	5 BNC connectors
→ Outputs	1 DVI connector
→ Ports	IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
→ Bandwidth	Supports up to 1.65Gbps bandwidth per graphic channel
→ Power Source	12V DC, 330mA

The 670R is a high-performance fiber optic receiver for HDMI signals. The 670R receives an optical signal from the 670T and converts the light pulses back to an...

→ Inputs	1 optical connector
→ Outputs	HDMI connector
→ Bandwidth	Supports up to 3.5Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard	Supports HDMI 1.3, using fiber optic communication links and DDC2B
→ Extension Limit	1700m (>5570 feet) for 1080p/60Hz

The 671T and 671R are a high-performance fiber optic transmitter/receiver duo for DVI signals. The unit converts a DVI signal to light pulses that are transmitted over one single...

→ Inputs	1 optical connector
→ Outputs	DVI connector
→ Data Rate	Up to 1.65Gbps
→ Extension Limit	2000m (>6560 feet) for UXGA (1600x1200) and 1080p
→ Fiber-Optic Connection	SC connectors for multimode (OM3) fiber cable

The 690R is a high−performance fiber optic receiver for SDI video signals up to 3G HD−SDI. The 690T converts two 3G HD−SDI signals to single−mode fiber optic and the...

The 705xl and 706-xl are a twisted pair transmitter and receiver for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the...

→ Input	1 twisted pair input on terminal block connectors; 1 loop on terminal block connectors
→ Output	2 composite video 1Vpp/75Ω on BNC connectors
→ Bandwidth (-3dB)	108MHz (-3dB)
→ Diff. Gain (PAIR)	0.08%
→ Diff. Phase (PAIR)	0.07Deg

The 712-N is a twisted pair receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair...

→ Input	1 RJ-45 CAT 5 shielded connector (LINE IN)
→ Output	1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
→ Video Max. Signal Level	2.8Vpp
→ Audio Max. Signal Level	7.6Vpp
→ Video Bandwidth (-3dB)	85MHz

Crestron AM-3200-WF AirMedia Receiver with WiFi Network Connectivity enables secure wireless collaboration in the modern digital workspace. Easy to deploy and manage, install the...

The CNXRMIRD is an optional infrared (IR) receiver designed for use with a control system or room solution box that includes an IR input port. The CNXRMIRD...

The CNXRMIRD is an optional infrared (IR) receiver designed for use with a control system or room solution box that includes an IR input port. The CNXRMIRD...

The DM-RMC-100-S provides a simple one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® Fiber...

The DM-RMC-150-S provides an enhanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G®...

The DM-RMC-200-C provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+™...

The DM-RMC-200-S provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G®...

The DM-RMC-200-S2 provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G® SM...

The DM-RMC-4KZ-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+®...

Crestron's DM-RMC-4KZ-SCALER-C DigitalMedia 8G+ 4K60 4:4:4 HDR Receiver and Room Controller with Scaler.

Provides a controller and interface for an HD or 4K display...

This item is DISCONTINUED.  For suggested replacement, see Crestron DM-RMC-4KZ-SCALER-C....

The DM-RMC-SCALER-S provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G®...

The DM-RMC-SCALER-S2 provides an advanced one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G®...

The Crestron® DM-TXRX-100-STR is a compact H.264 streaming encoder/decoder designed to enable the distribution of high-definition AV signals over an IP network. Configurable as...

The Tv One DVI-1FO-R DVI Receiver over 1FO Receives the Fiber Optic signal and converts to DVI. Extend DVI up to 6600 feet (2000 meters) using 50μ OM3e/OM4...

The Tv One DVI-ELRPOL-R DVI ELR Receiver with POL  Extends DVI up to 330 feet (100 meters) and uses POL (Power Over Line) technology to supply power to the...

The Tv One DVIRS232-1FO-R DVI-RS232 Receiver over 1FO Receives the Fiber Optic signal and converts to DVI. Extend DVI up to 6600 feet (2000 meters) using 50μ...

The Tv One DVIRS232-ELRPOL-R DVI-RS232 ELR Receiver with POL Extends DVI up to 330 feet (100 meters) and uses POL (Power Over Line) technology to supply power to...

This item has been DISCONTINUED.

The most-trusted wireless monitoring system gets even better. With upgraded features, this Sennheiser EK 300 IEM...

Modulation	FM, MPX-Stereo
RF frequency range	516 - 865 MHz
Carrier frequency	1680
Presets	max. 16
Switching bandwidth	42 MHz

The Nitek IP & PoE Over Coax Extender EL1500C IP video over Coax network extender-PoE Inserter (EtherStretch) system includes both the transmitter and receiver units. The System...

Unit	Transceiver
Size	1.1"H x 1.6"W x 4.93"D
Power Requirements	PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection	[1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection	[1] Coaxial BNC Connector

The Nitek Ethernet & PoE Extender EL1500U IP ethernet network extender-PoE Inserter (EtherStretch) can quickly turn any ordinary 4 pair category network cable into a high speed...

Unit	Transceiver
Size	1.1"H x 1.6"W x 3.6"D

The EL4500C is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable...

The Nitek Ethernet over Coax 16 Port IP Extender w/Gigabit PoE Switch ER16500C IP video over Coax multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit...

Unit	Transceiver
Size	1 RU x 12.7"D
Power Requirements	IEC380 power connector - 100-240 VAC input
Ethernet Connection	[1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection	[16] Coaxial BNC Connector

The Nitek ER1651U is another component of the NITEK cutting edge Etherstretch™ line. The ER1651U Receiver cambined with an ET1551U Transmitter (sold separately)...

Network Output Port	(1) RJ45 Connector, 1 Gigabit
Link Port	16 Twisted Pair Wires
Ethernet Connection	[1] Auto Configuring 10 ⁄ 100 Full Duplex
LED Connectivity Indicators	Link Status, PoE Out, 10Mb or 1000Mb
Power Requirements	IEC380 Connector -115-240VAC/50-60Hz/150Watt Max

The Etherstretch™ ER8400C Ethernet over Coax multi-port network extender-Gigabit PoE Switch is a Wall Mount Receiver unit that operates with from 1 to 8 ET1500C Transmitter...

The Nitek 8 Port IP Extender w/Gigabit PoE Switch ER8500C IP video over Coax multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with...

Unit	Transceiver
Size	1 RU x 12.7"D
Power Requirements	IEC380 power connector - 100-240 VAC input
Ethernet Connection	[1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection	[8] Coaxial BNC Connector

Nitek's FRS311000R00 is a single fiber channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode or...

Nitek's FRS311000S00 is a single fiber per channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode or...

Niteks FRS312104R00 is a single fiber per channel Universal-Mode™ video and data receiver. Niteks unique Universal-Mode™ optics allow the same unit to be used with single-mode...

Nitek's FRS312104S00 is a single fiber channel Universal-Mode™ video and data receiver in which both video and data are received over the same fiber. Nitek's unique...

Nitek's FRS322000R00 is a two channel video only Universal-Mode™ receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow the unit...

Niteks FRS322000S00 is a two channel video only Universal-Mode receiver, that requires a single fiber per channel. Niteks unique Universal-Mode optics allow the unit to be used...

Nitek's FRS324104R00 is a two channel video and data, Universal-Mode™ receiver. The system requires a single fiber per channel. Both video and data are transmitted over the same...

Nitek's FRS324104S00 is a two channel video and data, Universal-Mode™ receiver. The system requires a single fiber per channel. Both video and data are transmitted over the same...

Nitek's FRS344000R00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode optics allow the unit to...

Nitek's FRS344000S00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow the unit...

Nitek's FRS541000R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS541000S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS541100R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS541100S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS541110R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS541110S00 is a four channel Universal-Mode™ video receiver that allows the same unit to be used with 1 single-mode or multi-mode fiber optic cabling type.

Nitek's FRS581000R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS581000S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS581100R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS581100S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS581110R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

Nitek's FRS581110S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or multi-mode...

The Pelco FSFP Series transceivers are MSA-compliant, small form-factor pluggable (FSFP) modules that allow for an optical or copper interface when using a Pelco...

The FTD1/FRD1 fiber transmitter and receiver provide transmission of bidirectional data over one optical fiber. The FTD1 transmitter and FRD1...

The FTD4/FRD4 fiber transmitter and receiver provide transmission of four bidirectional data channels over one optical fiber in a two-slot wide design. The FTD4...

This item is DISCONTINUED.

The Crestron® HD-RX-4K-410-C-E or HD‑RX-4K-410-C-E-SW4 multiformat AV switch and receiver...

The Crestron® HD‑RX‑4K‑510‑C‑E or HD‑RX-4K-510-C-E-SW4 multiformat AV switch and receiver provides enhanced HDMI® video switching and audio...

This item is DISCONTINUED.

The Sennheiser HDI-1029-PLL16 is a very lightweight, user-friendly infrared stethoset receiver for use with the...

Modulation	FM
Carrier frequency	55 - 695 kHz
Operating time	10 hours
Power Supply	BA 90, 2.5 V, 170 mAh
Weight incl. Accupack	2.1 oz. (60 g)

The Lectrosonics IFB-R1a is a frequency-agile UHF wireless IFB beltpack monitoring receiver, housed in a durable slim-profile case, and capable of accessing 256 frequencies...

The TOA IR-500R IR Wireless Wall Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-500R receives IR signal from the TOA...

The Azden IRR-30 Dual Channel Infrared Receiver is intended for use with any of the Azden IR transmitters. The IRR-30 allows two IR transmitters to be used...

The Azden IRR-40P 2-Channel Infrared Receiver is designed for use with Azden IR (Infrared) wireless transmitters (sold separately). The IRR-40P features a built-in amplifier with...

The Azden IRR-50P is a three-channel, ceiling-mounted IR receiver with remote transmitter volume control, built in power amp and

The KDS−EN2R is an IP−based receiver for HDMI signals. Using JPEG2000 compression technology, the KDS−EN2R receives a visually lossless HD image with...

This item is DISCONTINUED.  For alternate solutuion see Kramer KW-14.

The...

Kramer KW-14 Wireless HD Transmitter & Receiver system.

The Kramer KW−14T and KW−14R are a high−definition, wireless, HDMI...

The LECTROSONICS D4R from Lectrosonics is a 4-channel wireless receiver that operates on the DTV-free frequencies of 902-928 MHz. When used with a Lectrosonics...

A completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and Digital Hybrid Wireless® systems, with remarkable audio...

The LECTROSONICS DRM completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and Digital Hybrid Wireless®...

As part of the Lectrosonics Venue System, the LECTROSONICS VRT Tracking Receiver Module installs into the Venue Receiver Master (VRM) unit and provides 256 UHF selectable...

The NVT 4-Channel Video Active Receiver NV-452R is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km) using...

Video Frequency response	DC to 10 MHz
Video Equalization	0.5 dB typ
Video Automatic	(no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms

The NVT Video Active Receiver NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km)...

Video Frequency response	DC to 10 MHz
Video Equalization	0.5 dB typ
Video Automatic	(no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms

The NVT Model NV-ER1804 TBus Ethernet over Coax/UTP Receiver is a compact bus-architected receiver hub that has four TBus ports, each capable of supporting multiple TBus...

The NVT Model NV-ER1816i TBus Ethernet over Coax/UTP Receiver Hub is a 1U 19” rack mountable bus-architected media switch that has 16 TBus ports, capable of supporting up to 32...

The NVT Model NV-ER1808i TBus Ethernet over Coax/UTP Receiver Hub is a 1U 19" rack mountable bus-architected media switch that has eight (8) TBus ports, capable of supporting up...

The PT120 is a twisted pair receiver for computer graphics video signals. The PT 120 converts a twisted pair signal from a PT-110 transmitter (or other compatible...

→ Input	1 RJ-45 connector
→ Output	1 VGA/UXGA on a 15-pin HD connector
→ Max. Output level	1.5Vpp
→ Max. Resolution	WUXGA & 1080p
→ Diff. Gain	2.9% (worst case)

The Kramer PT-120XL is an extended range twisted pair receiver for computer graphics video signals. It converts a twisted pair signal from a WP-110 transmitter (or other...

The PT−572+ is a DGKat™ twisted pair receiver for HDMI signals. The PT−571 converts an HDMI signal to a single twisted pair signal and the PT−572+...

The PT572HDCP is a DGKat™ twisted-pair receiver for DVI signals. The PT-571HDCP converts the DVI to twisted pair signal and the PT 572HDCP converts the twisted...

→ Inputs	1 DGKat twisted pair on an RJ-45 connector
→ Outputs	1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector, DDC signal 5Vpp (TTL)
→ Bandwidth	Supports up to 1.65Gbps
→ Power Source	12V DC, 250mA
→ Dimensions	6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H

The Nitek 16 Port Video, Power and Data Receiver PVR164 is a head-end distribution system for video, power and data for control. The system provides these functions for 16...

Camera Port	RJ45 Connector
Data In	2 wire push-in terminals
Video Out	BNC Connector
Power	Screw Terminals for 16-24 AWG wire
Power Requirements	Class 2 Low Voltage

The Shure Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync

The R400a is a high performance, triple-conversion, frequency synthesized, UHF receiver fully compatible with all Lectrosonics 400 series transmitters, and a number of analog...

The StarDot Technologies SDHMSRV4 4-Channel MCLDC Network Receiver supports up to 4 MCLDC cameras connected via coaxial cable. The ONVIF Profile S compliant channel receiver can...

The Sony SNCA-ZX104 Hybrid 4-Channel Camera Receiver allows you to seamlessly integrate images from 4 different hybrid cameras, enabling their easy and...

The Electro Voice Telex SR-400 is a portable VHF 16-channel frequency-agile receiver with clear reception and treble boost control for improved intelligibility,...

The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video...

→ Input	1 RJ-45 CAT 5 shielded connector (LINE IN)
→ Output	1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector
→ Max. Output Level	Video: 2.6V; Audio: 4.6Vpp
→ Bandwidth	Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB
→ Non-Linearity	<0.05%

The TP-120 is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

→ Input	1 RJ-45 line in
→ Output	1 VGA/UXGA on a 15-pin HD connector
→ Max. Output Level	1.4Vpp
→ Max. Resolution	WUXGA & 1080p
→ S/N Ratio	80dB

The TP-120-OD is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

→ Input	1 RJ-45 line in
→ Output	1 VGA/UXGA on a 15-pin HD connector
→ Max. Output Level	1.4Vpp
→ Max. Resolution	WUXGA & 1080p
→ S/N Ratio	80dB

The TP-122-od is a twisted pair receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121-od transmitter converts computer graphics video and unbalanced...

→ Input	1 RJ-45 line in connector
→ Output	Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
→ Max. Output Level	Video: 1V; Audio: 2.5V
→ Max. Resolution	WUXGA & 1080p
→ S/N Ratio	Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB

The TP−122N is a twisted pair receiver for computer graphics video, unbalanced stereo and S/PDIF audio signals. The unit receives a twisted pair signal from the TP−121EDID...

The TP−122xl is a high−performance twisted pair receiver for computer graphics video and unbalanced stereo audio signals. It converts the twisted pair input signal to WUXGA...

The TP-124 is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs...

→ Input	1 RJ-45 OUT connector
→ Outputs	Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
→ Max. Output Level	Video: 1V; Audio: 2.5V
→ Communication	RS-232 on 2-pin terminal block; maximum bitrate 19200bps
→ Controls	Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz

The TP-124-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123-od converts computer graphics, audio, and RS-232...

→ Input	1 RJ-45 OUT connector
→ Outputs	Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio Analog 3.5mm mini jack
→ Max. Output Level	Video: 1V; Audio: 2.5V
→ Communication	RS-232 on 2-pin terminal block; maximum bitrate 19200bps
→ Controls	Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz

The TP-126-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and bi-directional RS-232 data signals. The TP 126-od receives a...

→ Inputs	1 RJ-45 LINE IN connector
→ Outputs	Video: 1 UXGA on a 15-pin HD connector; Audio: 1 S/PDIF on an RCA connector, 1 audio ANALOG on a 3.5mm mini jack
→ Max. Output Level	Video: 1.6V, Audio: 2.3V
→ Controls	Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBm (130m) @50MHz
→ RS-232 Baud Rate	Up to 19200bps

The TP−126xl is an extended range twisted pair receiver for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. The unit...

The TP−134 is a high−performance, extended range twisted pair receiver for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232 data signals....

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

→ Inputs	1 RJ-45 LINE IN connector
→ Outputs	Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio S/PDIF RCA connector, 1 audio analog 3.5mm mini jack
→ Max. Output Level	Video: 1V, Audio: 2.5V
→ Controls	Level: –7.5dB to 4.4dB
→ EQ	0dB to 33dBm, (130m) @50MHz

The TP-200AXR is a twisted pair receiver for computer graphics video and unbalanced stereo signals. The TP-100AXR converts the input signals into a twisted pair signal and the...

→ Inputs	1 RJ-45 LINE IN connector
→ Outputs	1 RJ-45 line loop out, 2 VGA on 15-pin HD connectors, 2 S/PDIF on RCA connectors, 2 audio analog 3.5mm mini jacks
→ Max. Output Level	Video: 1.8V, audio: 2.9V
→ Controls	Level: –7dB to 4dB; EQ.: 0dB to 16dB (60m) @50MHz
→ Resolution	Up to WUXGA

The TP-42 is a twisted pair receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a...

→ Input	1 RJ-45 CAT 5 shielded connector (line in)
→ Outputs	1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
→ Max. Output Level	Video: 2.1Vpp
→ Max. Resolution	1080i
→ Diff. Gain	0.15%

The TP-50 is a twisted pair receiver for computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP 50 converts the twisted pair signal...

→ Input	1 CAT 5 on an RJ-45 connector
→ Outputs	2 XGA outputs on 15-pin HD (F) connectors; 1 LINE LOOP on an RJ-45 connector; 2 unbalanced stereo audio outputs on 3.5mm mini jacks; 2 S/PDIF outputs on RCA connectors
→ Max. Output Level	Video: 2Vpp @max gain.; Audio: 4.6Vpp (analog)
→ Max. Resolution	WUXGA
→ Audio Bandwidth	22kHz

The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair signal and the...

The TP−575 is a DGKat™ twisted pair line driver for HDMI over twisted pair signals. The unit receives a twisted pair signal and outputs both an HDMI and twisted pair signal to...

The TP−580R is a high−performance, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580R receives an HDBaseT twisted...

The TP−580RXR is an extended range, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580RXR receives an HDBaseT twisted...

The TP−582R is a high−quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI inputs, and...

The Niket Active Video Receiver for UTP Transmission TR 515 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works...

Receiver Unit	Receiver only
Size	1.6” H x 4.3” W x 2.4” D
Power Requirements	12 to 24 VAC or VDC, 45mA
Operating Distance	100 to 1,500 ft
Input	Balanced low voltage current loop

The Nitek Unshielded Twisted Pair TR515x4 is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using the RK400 card...

Unit	Transceiver
Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(4) Balenced low voltage current loop
Output	(4) 1vpp composite video monochrome or color

The Nitek Modular Active Video Receiver Card TR515x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card...

Unit	Transceiver
Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(8) Balenced low voltage current loop
Output	(8) 1vpp composite video monochrome or color

The Niket Receiver for UTP Transmission TR560 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works equally well...

Receiver Unit	Receiver only
Size	1.6” H x 4.3” W x 2.4” D
Power Requirements	12 to 24 VAC or VDC, 45mA
Operating Distance w/Passive Transmitter	100 to 3,000 feet
Operating Distance w/Active Transmitter Analog Video	500 to 7,200 feet

The Nitek Unshielded Twisted Pair TR560x4 modular card is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using...

Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(4) Balenced low voltage current loop
Output	(4) 1vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek Modular Active Video Receiver Card TR560x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card...

Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(8) Balenced low voltage current loop
Output	(8) 1vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Lectrosonics UCR100 100 system was designed to operate with the new generation of DV camcorders, offering an ultra-compact receiver and modest cost, yet preserving the...

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D® Digital Wireless Systems.

With an expansive set of professional features, including...

The Nitek 32 port active video hub VH3251 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP...

Unit	Transceiver
Size	1 RU x 9.5" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The Nitek 32 port active video hub VH3256 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP...

Unit	Transceiver
Size	1 RU x 9.5" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The VP5R is a high-performance distribution amplifier for computer graphics video signals on a twisted pair cable. The VP5R takes one twisted pair input and...

→ Input	1 RJ-45 connector
→ Outputs	5 XGA on 15-pin HD connectors
→ Bandwidth (-3dB)	445MHz
→ Max. Output level	1.4Vpp
→ Max. Resolution	WUXGA & 1080p

This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.

From Lectrosonics, the...

The Lectrosonics VRM WB is a WIDE BAND VENUE RCVR W/POWER SUPPLY that comes with NO ANTENNAS.  The VRM WB is used for For Live Shows, Theater and Concerts, its...

As part of the Lectrosonics Venue System, the VRS/E01 VRS Standard Receiver Module installs into the Venue Receiver Master (VRM) unit and provides 256 UHF selectable frequencies....

The standard camera-mount receiver for any “PRO” series transmitter, the Azden WR-PRO is a single channel receiver, but has two selectable operating frequencies to choose from...