Search
https://www.avsupply.com/images/logos/kramer-logo.gif

Kramer

Kramer Sierra Video Audio Video Equipment
Video & Computer Signal Processing Solutions
101l.jpg
Kramer: 101l
1:1 Composite Video Line Amplifier
The 101-L is a high-performance line amplifier for composite video signals. The 101 L provides controls to compensate for signal loss inherent in long cable...
→ Input    1 Composite Video on A Bnc Connector, 1vpp/75Ω
→ Output    1 Composite Video on A Bnc Connector, 1vpp/75Ω
→ Max. Output Level    2.5vpp
→ Bandwidth    500mhz
→ Diff. Gain    0.03%
More Information
102mx.jpg
Kramer: 102mx
2 Channel Stereo Audio Mixer

The 102-MX is a high-performance 2-channel stereo audio mixer for line level and mic level audio signals. The 102 MX mixes one line level input with either a...

→ Inputs    Mic/line 1: 10mV/1.6kΩ, 1Vpp/10kΩ, on 6.5mm phone connector; Line 2: 1Vpp/10kΩ, stereo on RCA connectors
→ Outputs    Line level, stereo, up to 5.6Vpp/150Ω on RCA connectors
→ Bandwidth (-3dB)    100kHz
→ Gain Range    -12dB to 68.5dB (mic); -12dB to 8.8dB (line 1)
→ Diff. Phase    0.05Deg
More Information
102xl.jpg
Kramer: 102xl
2 Channel Balanced Mono Audio Mixer

The 102-xl is a high-performance 2-channel mono audio mixer for balanced line level and mic level mono audio signals. The 102 xl mixes two mono inputs and...

→ Inputs    2 line/mic balanced mono on XLR (F) connectors
→ Output    1 line/mic balanced mono on an XLR (M) connector
→ Max. Output Level    18Vpp
→ Bandwidth (-3dB)    >100kHz
→ S/N Ratio    Line: 91.5dB Mic: 62.5dB, 1kHz
More Information
103av.jpg
Kramer: 103av
(discontinued) 1:3 Composite Video & Stereo Audio Distribution Amplifier

This item is DISCONTINUED.

 

The 103-AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. The...

→ Inputs    1 Composite Video, 1Vpp/75Ω on an RCA Connector; 1 Unbalanced Stereo Audio, 1Vpp/33kΩ, on 3.5 Mm Mini Jack
→ Outputs    3 Composite Video, 1Vpp/75Ω on RCA Connectors; 3 Unbalanced Stereo Audio, 1Vpp/150Ω on 3.5mm Mini Jacks
→ Max. Video Output    2Vpp
→ Video Bandwidth (-3dB)    320MHz
→ Audio Bandwidth (-3dB)    20kHz
More Information
104ln.jpg
Kramer: 104ln
1:4 Composite Video Differential Line Amplifier

The 104-LN is a high-performance line amplifier for composite or SDI video signals. The 104 LN includes differential circuitry to help eliminate noise often found...

→ Input    1 Video, Differential, 1Vpp/75Ω, on A BNC Connector
→ Outputs    4 Composite Video, 1Vpp/75Ω on BNC Connectors
→ Max. Output Level    1.6Vpp
→ Bandwidth (-3dB)    423MHz
→ Diff. Gain    0.22%
More Information
104r.jpg
Kramer: 104r
1:4 RF Distribution Amplifier

The 104-R is a high-performance distribution amplifier for RF signals. The 104 R takes one RF (CATV/MATV) signal and distributes it to four identical outputs.

→ Input    1 RF, 0.5Vpp/75Ω (max.) on an "F" type connector
→ Outputs    4 RF, 0.5Vpp/75Ω (max.) on "F" type connectors
→ Bandwidth    40MHz to 3000MHz ( /-3dB)
→ Coupling    AC
→ RF Gain    6dB typical across band
More Information
105a.jpg
Kramer: 105a
1:5 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

→ Input    1 unbalanced stereo/balanced mono, 1Vpp/33k#8486; on a 3.5mm mini jack
→ Outputs    5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks
→ Max. Output    5Vpp
→ Audio Bandwidth (-3dB)    20kHz
→ S/N Ratio    80dB unweighted
More Information
105v.jpg
Kramer: 105v
1:5 Composite Video Distribution Amplifier

The 105-V is a high-performance distribution amplifier for composite video signals. The 105 V takes one input, provides correct buffering and isolation and...

→ Input    1 Video, 1Vpp/75Ω on an RCA Connector
→ Outputs    5 Video, 1Vpp/75Ω on RCA Connectors
→ Max. Video Output    2Vpp
→ Video Bandwidth (-3dB)    400MHz
→ Diff. Gain    0.1%
More Information
105vb.jpg
Kramer: 105vb
1:5 Composite Video Distribution Amplifier

The 105-VB is a high-performance distribution amplifier for composite video signals. The 105 VB takes one input, provides correct buffering and isolation and...

→ Input    1 Composite Video, 1Vpp/75Ω on A BNC Connector
→ Outputs    5 Composite Video, 1Vpp/75Ω on BNC Connectors
→ Max. Video Output    2Vpp
→ Video Bandwidth (-3dB)    400MHz
→ Diff. Gain    0.1%
More Information
106.jpg
Kramer: 106
1:2 Microphone Line & Distribution Amplifier

The 106 is a high-quality distribution amplifier for balanced mono microphone signals. The 106 takes one dynamic or condenser microphone input and distributes the...

→ input    1 balanced mono microphone on a 3-pin terminal block connector
→ Outputs    2 balanced mono line outputs on 3-pin terminal block connectors
→ Max. Output Level    27Vpp (22dBu)
→ Bandwidth    >40kHz
→ S/N Ratio    81dB
More Information
123vxl.jpg
Kramer: 123vxl
1:3 Composite Video Differential Line Amplifier

The 123-Vxl is a high-performance line amplifier for composite or SDI video signals. The 123 Vxl includes controls and circuitry to compensate for signal losses...

→ Input    1 Looping Video, Differential, 1Vpp/75Ω on A BNC Connector
→ Outputs    3 Video, 1Vpp/75Ω on BNC Connectors
→ Max. Output Level    1.7Vpp
→ Bandwidth (-3dB)    425MHz
→ Diff. Gain    0.5%
More Information
401c.jpg
Kramer: 401c
S-Video To Composite Video Format Converter

The 401-C is a high-performance format converter for s-Video (Y/C) signals. The 401 C converts an s-Video input to two composite and two s-Video (Y/C) outputs...

→ Input    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
→ Outputs    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors
→ Max. Output Level    1.4Vpp
→ Video Bandwidth (-3dB)    160MHz (Y)
→ Non-Linearity    0.05%
More Information
401dn.jpg
Kramer: 401dn
Composite Video To S-Video Format Converter

The 401-DN is a high-performance format converter for composite video signals. The 401 DN converts a composite video input to an s-Video (Y/C)

→ Input    1 composite video, 1Vpp/75Ω on a BNC connector
→ Output    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
→ Video Bandwidth    3.5MHz
→ Diff. Gain    0.8%
→ Diff. Phase    0.1Deg
More Information
482xl.jpg
Kramer: 482xl
Balanced/Unbalanced Stereo Audio Transcoder

The 482-xl is a high-performance audio transcoder for balanced and unbalanced stereo audio signals. The 482 xl simultaneously converts balanced stereo signals to...

→ Input    1 unbalanced audio stereo on a 3-pin terminal block connector; 1 balanced audio stereo on a 5-pin terminal block
→ Output    1 balanced audio stereo on a 5-pin terminal block connector; 1 unbalanced audio stereo on a 3-pin terminal block connector
→ Max. Output Level    Balanced: 21dBu; unbalanced: 21dBu @max gain
→ Bandwidth (-3dB)    >100kHz
→ Controls    -57dB to 6dB (balanced to unbalanced level); -16dB to 19dB (unbalanced to balanced level)
More Information
4x1v.jpg
Kramer: 4x1v
4x1 Composite Video Mechanical Switcher

The 4x-1V is a high-performance switcher for composite video signals. the 4x 1V switches any one of four signals to a single output.

→ Inputs    4 video, 1Vpp/75Ω on RCA connectors
→ Output    1 composite or single component video, 1Vpp/75Ω on an RCA connector
→ Bandwidth (-3dB)    400MHz
→ Switching System    Mechanical, break-before-make
→ Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
More Information
4x1vb.jpg
Kramer: 4x1vb
4x1 Composite Video Mechanical Switcher

The 4x1-VB is a high-performance switcher for composite video signals. The 4x1 VB switches any one of four signals to a single output.

→ Input    4 video, 1Vpp/75Ω on BNC connectors
→ Output    1 composite or single component video, 1Vpp/75Ω on a BNC connector
→ Bandwidth (-3dB)    400MHz
→ Switching System    Mechanical, break-before-make
→ Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
More Information
4x4a.jpg
Kramer: 4x4a
4x1:4 Stereo Audio Switcher
The 4x4-A is a high-performance switcher for stereo audio signals. The 4x4 A switches any one of four input signals simultaneously to four identical outputs.
→ Inputs    4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks
→ Outputs    4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks
→ Max Output Level    5.2Vpp ( 7dBu)
→ Audio Bandwidth (-3dB)    100kHz
→ S/N Ratio    90dB
More Information
602r-t.jpg
Kramer: 602r-t
Detachable DVI Optical Transmitter & Receiver

The 602R/T are a small and lightweight fiber optic transmitter and receiver pair for DVI signals. The 602 T converts electrical signals to optical signals and the...

→ Inputs    DVI IN (602T), 2 LC optical connectors (602R)
→ Outputs    2 LC optical connectors (602T), DVI OUT (602R)
→ Resolution    Up to WUXGA @60Hz (1.65Gbps)
→ Power Source    5V DC, <500mA
→ Dimensions    3.9cm x 6.9cm x 1.5cm (1.5" x 2.83" x 0.75") W, D, H
More Information
610r-t.jpg
Kramer: 610r-t
Detachable DVI Optical Transmitter & Receiver

The 610R/T are a detachable optical transmitter and receiver for sending DVI signals with resolutions of up to 1920x1200 at 60Hz over LC optical cable. The 610 T...

→ Input    DVI IN (610T), 4 LC optical connectors (610R)
→ Output    4 LC optical connectors (610T), DVI OUT (610R)
→ Resolution    Up to WUXGA @60Hz (1.65Gbps)
→ Humidity    Operating: 5% to 65%; Storage 5% to 95%
→ Power Source    5V DC, <500mA
More Information
611r.jpg
Kramer: 611r
Composite Video Optical Receiver

The 611T and 611-R are a high-performance fiber optic transmitter and receiver for composite video signals. The 611T transmitter converts a composite video signal into a fiber...

→ Input    Fiber optic ST connector
→ Output    Composite Video 1Vpp/75Ω on a BNC connector
→ Operation Distance    Up to 5km (MultiMode)
→ Video Bandwidth (-3dB)    55 MHz. 20 MHz
→ Diff. Gain    0.4%
More Information
611t.jpg
Kramer: 611t
(discontinued) Composite Video Optical Transmitter

This item is DISCONTINUED.

 

The 611-T is a high-performance fiber optic transmitter for composite video signals. The 611 T...

→ Input    Composite video, 1Vpp/75Ω on a BNC connector
→ Output    Fiber optic ST connector, G62.5/125um (recommended) or G50/125um multimode fiber optic cable
→ Operation Distance    Up to 5km (multimode)
→ Video Bandwidth (-3dB)    55MHz
→ Diff. Gain    0.4%
More Information
613r-t.jpg
Kramer: 613r-t
3G HD-SDI Mini Optical Receiver & Transmitter

The 613R/T is a receiver/transmitter pair for digital video signals up to 3G HD-SDI. The 613R/T pair consists of two compunents; the 613T...

→ Inputs    SDI, HD-SDI, 3G HD-SDI on a 75Ω BNC connector (613T); 1 fiber optic ST connector (613R)
→ Outputs    1 fiber optic ST connector (613T); SDI, HD-SDI, 3G HD-SDI on a 75Ω BNC connector (613R)
→ Maximum Data Rate    Up to 3Gbps
→ Maximum Range    30km (18.6 Miles) @1080p, 3G-SDI format
→ Format    SMPTE 424M (3G-SDI); SMPTE 292M (HD-SDI); SMPTE 259M (SD-SDI, SDI, DVB-ASI)
More Information
614r-t.jpg
Kramer: 614r-t
DVI Optical Trans & Receiver

The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at...
More Information
616r-t.jpg
Kramer: 616r-t
DVI Optical Trans & Receiver

The 616T and 616R are a small and lightweight, detachable fiber optic transmitter and receiver pair. They transmit uncompressed resolutions of up to WQXGA...
More Information
621r.jpg
Kramer: 621r
DVI Optical Receiver

The 621R is an optical receiver for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the optical...

→ Input    4 LC optical connectors for R, G, B & clock. 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
→ Output    DVI-D on a DVI-I connector
→ Bandwidth    1.65Gbps
→ Power Source    12V DC, 1.25A
→ Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
More Information
621t.jpg
Kramer: 621t
DVI Optical Transmitter

The 621T is an optical transmitter for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the...

→ Input    DVI-D on a DVI-I connector
→ Output    4 LC optical connectors for R, G, B & Clock. 1 CAT 5 (RJ-45) for DDC and HDCP bidirectional data
→ Bandwidth    1.65Gbps
→ Power Source    12V DC, 500mA
→ Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
More Information
622r.jpg
Kramer: 622r
Dual Link DVI Optical Receiver

The 622T and 622R are an optical transmitter and receiver pair for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an optical...

→ Input    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue, & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
→ Output    DVI-D on a DVI-I connector
→ Bandwidth    3.3Gbps
→ Power Source    12V DC, 200mA
→ Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
More Information
622t.jpg
Kramer: 622t
Dual Link DVI Optical Transmitter

The 622T and 622R are optical transmitter and receivers for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an...

→ Input    DVI-D on a DVI-I connector
→ Output    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
→ Bandwidth    3.3Gbps
→ Power Source    12V DC, 200mA
→ Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
More Information
6241hd.jpg
Kramer: 6241hd
HD-SDI Switcher

The 6241-HD is a high-performance switcher for HD-SDI serial digital video signals. The 6241 HD takes any one of four HD-SDI inputs, provides reclocking and...

→ Inputs    4 SMPTE 259M/344M serial digital video inputs (75Ω) on BNC connectors
→ Outputs    1 SMPTE 259M/344M serial digital video output (75Ω) on BNC connectors
→ Max. Data Rate    1.485Gbps
→ Max. Output Level    800mVpp/75Ω
→ Equalization    Automatic equalization for losses on 75Ω coaxial cable
More Information
6241hdxl.jpg
Kramer: 6241hdxl
4x1 3G HD-SDI Switcher

The 6241-HDxl is a high-performance switcher for 3G HD-SDI video signals. The 6241 HDxl takes any one of four 3G HD-SDI inputs, provides reclocking and...

→ Inputs    4 SMPTE 259M/344M serial digital video inputs (75Ω) on BNC connectors
→ Outputs    1 SMPTE 259M/344M serial digital video output (75Ω) on BNC connectors
→ Max. Data Rate    2.97Gbps
→ Max. Output Level    800mVpp/75Ω
→ Equalization    Automatic equalization for losses on 75Ω coaxial cable
More Information
6241n.jpg
Kramer: 6241n
4x1 SDI Switcher

The 6241-N is a high-performance switcher for serial digital video signals. The 6241 N takes any one of four SDI inputs, provides reclocking and equalization, and...

→ Inputs    4 SMPTE 259M/344M serial digital video inputs (75Ω) on BNC connectors
→ Outputs    1 SMPTE 259M/344M serial digital video output (75Ω) on BNC connectors
→ Max. Data Rate    540Mbps
→ Max. Output Level    800mVpp/75Ω
→ Equalization    Automatic equalization for losses on 75Ω coaxial cable
More Information
6410n.jpg
Kramer: 6410n
Digital Audio To Balanced Stereo Audio Format Converter
→ Inputs    4 digital audio inputs: AES-3id on a terminal block connector; AES/EBU on a BNC connector; S/PDIF on an RCA connector; TOSLINK® optical connector
→ Outputs    2 analog outputs: balanced line out on detachable terminal blocks; 3.5mm headphone jack
→ Sample Rate Conversion    32kHz, 44.1kHz, 48kHz, 96kHz
→ Conversion Gain    12dB, 16dB, 20dB, 24dB
→ Bandwidth ( 4dBu/-3dBu)    20Hz to 22kHz
More Information
6420n.jpg
Kramer: 6420n
Balanced Stereo Audio To Digital Audio Format Converter
→ Input    1 analog input balanced line in (10k) on detachable terminal blocks
→ Outputs    4 digital audio outputs: AES-3id on a BNC connector; AES/EBU on a terminal block connector; S/PDIF on an RCA connector; TOSLINK® optical connector
→ Sample Rate Conversion    32kHz, 44.1kHz, 48kHz, 96kHz
→ Max. Input Level    11.2Vpp @1kHz
→ Conversion Gain    -12dB, -16dB, -20dB, -24dB
More Information
6502.jpg
Kramer: 6502
4x1:2 S/PDIF Switcher

The 6502 is a high-performance switcher for S/PDIF digital audio signals. The 6502 takes any one of four inputs, provides reclocking and equalization and...

→ Inputs    4 digital audio S/PDIF on RCA connectors
→ Outputs    2 digital audio S/PDIF on RCA connectors
→ Sampling Rate    32kHz to 192kHz
→ Standards    CP1201, IEC 60958, AES3ID and S/PDIF
→ Dimensions    12cm x 6.95cm x 2.44cm (4.72" x 2.74" x 0.96") W, D, H
More Information
6505.jpg
Kramer: 6505
1:5 S/PDIF Distribution Amplifier

The 6505 is a high-performance distribution amplifier for S/PDIF digital audio signals. The 6505 takes one S/PDIF input and distributes the signal to five...

→ Input    1 S/PDIF digital audio input on an RCA connector
→ Outputs    5 S/PDIF digital audio outputs on RCA connectors
→ Standards    CP1201, IEC-60958, AES-3id and S/PDIF
→ Sample Rate    32kHz to 192kHz
→ Input Impedance    75Ω
More Information
650r.jpg
Kramer: 650r
DVI Over Coax Receiver

The 650R is a high-performance receiver for DVI, RS-232, and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them back...

→ Inputs    5 BNC connectors
→ Outputs    1 DVI connector
→ Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
→ Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
→ Power Source    12V DC, 330mA
More Information
650t.jpg
Kramer: 650t
DVI Over Coax Transmitter

The 650T is a high-performance transmitter for DVI, RS-232 and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them...

→ Inputs    1 DVI connector
→ Outputs    5 BNC connectors
→ Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
→ Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
→ Power Source    12V DC, 330mA
More Information
670r.jpg
Kramer: 670r
HDMI Over Fiber Optic Receiver

The 670R is a high-performance fiber optic receiver for HDMI signals. The 670R receives an optical signal from the 670T and converts the light pulses back to an...

→ Inputs    1 optical connector
→ Outputs    HDMI connector
→ Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
→ Extension Limit    1700m (>5570 feet) for 1080p/60Hz
More Information
670t.jpg
Kramer: 670t
HDMI Over Fiber Optic Transmitter

The 670T is a high-performance fiber optic transmitter for HDMI signals. The 670T converts an HDMI signal to light pulses that it transmits over one single fiber...

→ Inputs    HDMI connector
→ Outputs    1 optical connector
→ Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
→ Extension Limit    1700m (>5570 feet) for 1080p/60Hz
More Information
671r.jpg
Kramer: 671r
DVI Over Fiber Optic Receiver

The 671T and 671R are a high-performance fiber optic transmitter/receiver duo for DVI signals. The unit converts a DVI signal to light pulses that are transmitted over one single...

→ Inputs    1 optical connector
→ Outputs    DVI connector
→ Data Rate    Up to 1.65Gbps
→ Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
→ Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
More Information
671t.jpg
Kramer: 671t
DVI Over Fiber Optic Transmitter

The 671T is a high-performance fiber optic transmitter for DVI signals. The 671T converts a DVI signal to light pulses that are transmitted over one single fiber...

→ Inputs    DVI connector
→ Outputs    Optical connector
→ Data Rate    Up to 1.65Gbps
→ Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
→ Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
More Information
673r-t.jpg
Kramer: 673r-t
4-Channel 3G HD-SDI Over Single Fiber Optic Transmitter & Receiver

The 673RT are a high-performance fiber optic transmitter and receiver pair for video signals up to 3G HD-SDI and dual link HD-SDI signals. The 673R/T duo consists...

→ Inputs    3G HD-SDI/HD-SDI/Dual-link SDI serial video, 75Ω on BNC connectors (673T); 1 optical connector (673R)
→ Outputs    1 optical connector (673T); 3G HD-SDI/HD-SDI/Dual-link SDI serial video, 75Ω on BNC connectors (673R)
→ Bandwidth    Up to 3Gbps for each SDI input
→ Fiber Optic Extension    Up to 1000m (>3200ft) for 3G HD-SDI
→ Input Cable Equalization (673T)    140m for HD-SDI, 120m for 3G HD-SDI
More Information
6808hdxl.jpg
Kramer: 6808hdxl
3G HD-SDI AES De-Embedder

The 6808HDxl is a high-performance audio de-embedder for 3G HD-SDI video signals. The 6808 HDxl can de-embed two selectable AES audio streams.

→ Input    1 SD/HD/3G HD-SDI
→ Outputs    1 SD/HD/3G HD-SDI, 2 AES/EBU audio on BNC connectors
→ Power Source    5V DC, 390mA
→ Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 3.0" x 1.0") W, D, H
→ Weight    0.3kg (0.7lbs)
More Information
6810hdxl.jpg
Kramer: 6810hdxl
3G HD-SDI Audio Embedder & De-embedder

The 6810HDxl is a high-performance audio embedder and de-embedder for 3G HD-SDI video signals. The 6810 HDxl can embed and de-embed four AES/3id audio streams.

→ Inputs    1 x SD/HD/3G HD-SDI, 1 x SD/HD/3G HD-SDI loop, 4 x AES/3id on BNC connectors
→ Outputs    1 x SD/HD/3G HD-SDI, 4 x AES/3id on BNC connectors
→ Sample Rate Conversion    48kHz
→ Power Source    5V DC, 1.04A
→ Dimensions    21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H
More Information
690r.jpg
Kramer: 690r
3G HD−SDI Fiber Receiver

The 690R is a high−performance fiber optic receiver for SDI video signals up to 3G HD−SDI. The 690T converts two 3G HD−SDI signals to single−mode fiber optic and the...
More Information
690t.jpg
Kramer: 690t
3G HD−SDI Fiber Transmitter

The 690T is a high−performance fiber optic transmitter for SDI video signals up to 3G HD−SDI. The 690T converts two 3G HD−SDI signals to single−mode fiber optic and the...
More Information
705xl.jpg
Kramer: 705xl
Composite Video Over Twisted Pair Branching Transmitter

The 705xl is a twisted pair transmitter for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the 706xl...

→ Input    1 composite video 1Vpp/75Ω on a BNC connector; 1 loop 1Vpp/75Ω on a BNC connector
→ Output    2 twisted pair outputs on terminal block connectors
→ Bandwidth (-3dB)    108MHz (-3dB)
→ Diff. Gain (PAIR)    0.08%
→ Diff. Phase (PAIR)    0.07Deg
More Information
706xl.jpg
Kramer: 706xl
Composite Video Over Twisted Pair Branching Receiver

The 705xl and 706-xl are a twisted pair transmitter and receiver for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the...

→ Input    1 twisted pair input on terminal block connectors; 1 loop on terminal block connectors
→ Output    2 composite video 1Vpp/75Ω on BNC connectors
→ Bandwidth (-3dB)    108MHz (-3dB)
→ Diff. Gain (PAIR)    0.08%
→ Diff. Phase (PAIR)    0.07Deg
More Information
711n.jpg
Kramer: 711n
Composite Video & Stereo Audio Over Twisted Pair Transmitter

The 711-N is a twisted pair transmitter for composite video and unbalanced stereo audio signals. The 711 N transmitter converts composite video and stereo audio...

→ Input    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
→ Output    1 RJ-45 CAT 5 shielded connector (LINE OUT)
→ Video Max. Signal Level    2.8Vpp
→ Audio Max. Signal Level    7.6Vpp
→ Video Bandwidth (-3dB)    85MHz
More Information
712n.jpg
Kramer: 712n
Composite Video & Stereo Audio Over Twisted Pair Receiver

The 712-N is a twisted pair receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair...

→ Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
→ Output    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
→ Video Max. Signal Level    2.8Vpp
→ Audio Max. Signal Level    7.6Vpp
→ Video Bandwidth (-3dB)    85MHz
More Information
717.jpg
Kramer: 717
1 BNC M/M Cable 15'

The 717 is a twisted pair (TP) transmitter for composite video and unbalanced stereo audio signals. The unit converts composite video and stereo audio signals into a twisted pair...
More Information
7408.jpg
Kramer: 7408
SDI To Multi-Format Analog Video Format Converter & Processor

The 7408 is a format converter for SDI (SMPTE 259M) signals. It converts an SDI video signal to composite video and s-Video (Y/C), or component (YUV)

→ Input    1 SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector
→ Outputs    1 reclocked SDI: SMPTE-259M, ITU-R BT.601 on a BNC connector; 1 composite video: 1Vpp/75Ω on a BNC connector; 1 s-Video: 1Vpp, 0.3Vpp/75Ω on two BNC connectors;1 component video (Y, U and V) on three BNC connectors
→ Bandwidth (-3dB)    5.7MHz
→ Diff. Gain    <1%
→ Diff. Phase    <1Deg
More Information
7508.jpg
Kramer: 7508
Multi-Standard Composite Video & S-Video To SDI Format Converter

The 7508 is a multi-format converter for composite video or s-Video (Y/C) signals. It converts either PAL, SECAM, and NTSC composite or s-Video (Y/C) signals into two SDI video...

→ Input    1 composite video, 1Vpp/75Ω on a BNC connector; 1 s-Video, 1Vpp, 0.3Vpp/75Ω on a 4-pin connector
→ Output    2 SDI SMPTE-259M, ITU-R BT.601 on BNC connectors
→ Digital Resolution    10 bits
→ Bandwidth    5MHz (-0.2dB)
→ Signal to Noise Ratio    57dB
More Information
810.jpg
Kramer: 810
Composite Video & S-Video Color Bar/Audio Tone Generator

The 810 is a high-performance composite video and s-Video (Y/C) color bar and 1kHz audio tone generator. The 810 outputs two composite video and one s-Video color...

→ Video Outputs    2 75% color bar on BNC connectors, 1Vpp/75Ω; 1 75% s-Video color bar on a 4-pin connector, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C)
→ Audio Outputs    1kHz, 4dBu/47Ω; balanced stereo audio on a detachable terminal block
→ Video S/N Ratio    75dB
→ Control    PAL/NTSC selector switch; audio level control (trimmer)
→ Line Jitter    2ns
More Information
841.jpg
Kramer: 841
Portable Computer Graphics Video Test Pattern Generator

The 841 is a high-performance portable computer graphics video test pattern generator. The 841 displays 31 preset patterns at 14 popular output resolutions...

→ Output    1 VGA, RGBHV on a 15-pin HD connector
→ Output Resolutions    SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA (1600x1200), WXGA (1280x800), WSXGA (1680x1050), WUXGA (1920x1200), WXGA (1440x900), SXGA (1400x1050), 1920x1080, 1280x720, 1152x864, 1280x960, 1920x1200 (reduced blanking); all resolutions are 60Hz progressive
→ Controls    Control buttons: PATTERN , PATTERN –, UXGA, SXGA, XGA, SVGA, SHIFT (ON), power (ON/OFF)
→ Indicators    ON – green, CHARGE – blue, lights when charging, 2-character display on the front panel
→ Power Source    5V DC, 1.4A (charge VGA), 1.0A (charge only)
More Information
900n.jpg
Kramer: 900n
Stereo Power Amplifier (8.4 Watts Per Channel)

The 900-N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. With the 900 N, either input can deliver a speaker output of 8.4...

→ Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector
→ Output    1 stereo loudspeaker output on a 4-pin terminal block connector
→ Output Power    8.4W RMS per channel into a 4Ω load
→ Output Music Power    35W RMS per channel into a 4Ω load
→ Bandwidth (-3dB)    24kHz
More Information
900xl.jpg
Kramer: 900xl
Stereo Audio Power Amplifier

The 900-xl is a high-performance power amplifier for line level stereo audio signals. The 900 xl accepts unbalanced audio signals on either of two RCA or 3.5mm...

→ Inputs    1 unbalanced stereo audio on a 3.5mm mini jack connector; 1 unbalanced stereo audio on RCA connectors
→ Output    1 stereo differential speaker output
→ Output Power    2x10W (4Ω)
→ Input Sensitivity    460mV
→ Output Music Power    2x40W (4Ω)
More Information
901.jpg
Kramer: 901
2x1 Personal Stereo Audio Power Amplifier & Switcher

The 901 is a high-performance integrated personal stereo amplifier for unbalanced stereo signals. The 901 accepts a stereo audio signal and delivers a speaker...

→ Inputs    1 unbalanced stereo audio, 1Vpp/50Ω on RCA connectors; 1 mono microphone, 5mV/3.2Ω (condenser) 4.8Ω (dynamic) with a type selector, on a 6.5mm phone jack
→ Outputs    Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output
→ Max. Output Level    8Vpp at Hi-Z load (headphones)
→ Bandwidth (-3dB)    37kHz
→ S/N Ratio    74dB
More Information
903.jpg
Kramer: 903
4x1 Personal Stereo Audio Amplifier & Switcher (10W/Channel)

The 903 is a high-performance integrated personal amplifier for unbalanced stereo audio signals. The 903 allows selection between four inputs and delivers a...

→ Inputs    1 unbalanced stereo audio 1Vpp/50Ω on a 3.5mm mini jack; 3 unbalanced stereo audio 1Vpp/50Ω on RCA connectors
→ Outputs    Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in
→ Output Power    2x10W (4Ω)
→ Output Music Power    2x40W (4Ω)
→ Bandwidth (-3dB)    20kHz
More Information
906.jpg
Kramer: 906
2x1 Stereo Audio Amplifier & Switcher (6.8 Watts Per Channel)

The 906 is a high-performance controllable power amplifier for line-level stereo audio signals. The 906 accepts either an unbalanced stereo audio signal on RCA...

→ Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
→ Outputs    1 speaker stereo audio on a 4-pin terminal block connector
→ Output Power    2 x 5.3W per channel into 8Ω; 2 x 6.8W per channel into 4Ω
→ Output Music Power    2 x 22W per channel into 8Ω; 2 x 28W per channel into 4Ω
→ Bandwidth (-3dB)    32.5kHz
More Information
907.jpg
Kramer: 907
Stereo Audio Power Amplifier (40 Watts Per Channel)

The 907 is a high-performance power amplifier for line-level stereo audio signals. The 907 accepts a balanced stereo audio signal on a terminal block connector...

→ Input    1 balanced stereo audio on a terminal block connector
→ Output    1 balanced stereo audio (speakers) on a terminal block connector
→ Output Power    40 watts per channel into 8Ω
→ Output Music Power    150W per channel into 8Ω
→ Input Sensitivity    1.2Vrms
More Information
907xl.jpg
Kramer: 907xl
Stereo Power Amplifier

The 907xl is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced...
More Information
908.jpg
Kramer: 908
Stereo Audio Amplifier & Switcher (40 Watts Per Channel)

The 908 is a high-performance audio amplifier for line-level stereo audio signals. The 908 accepts either a balanced or unbalanced stereo audio signal and...

→ Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
→ Output    1 speaker stereo audio on a 4-pin terminal block connector
→ Input Sensitivity    Unbalanced: 360mVpp; balanced: 220mVpp
→ Max. Voltage Gain    Unbalanced: 35dB; balanced: 40.5dB
→ Output Power    40W per channel into 8Ω
More Information
912.jpg
Kramer: 912
Stereo Audio Power Amplifier

The 912 is a high−performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 8.4 watts RMS power per channel into...
More Information
no-image.jpg
Kramer: afm-20dsp-le
Kramer AFM-20DSP-LE 20–Port Audio Matrix with DSP and Interchangeable Inputs & Outputs — Lite Edition

Kramer AFM-20DSP-LE 20–Port Audio Matrix with DSP and Interchangeable Inputs & Outputs — Lite Edition.

 

** Limited Availability...
More Information
f110.jpg
Kramer: f-110
VGA Line Transmitter

The F−110 is a wall plate insert transmitter for computer graphics video signals with resolutions up to and exceeding UXGA. It converts a computer graphics video signal into a...
More Information
fc-10eth.jpg
Kramer: fc-10eth
RS-232/RS-485 To Ethernet Converter

The FC10ETH is a bi-directional RS-232 or RS-485 to Ethernet control signal converter. The FC-10ETH allows two RS-232 (or one RS-232 and one RS-485) controllable...

→ Ethernet Interface    10/100BaseT Ethernet
→ Serial Interfaces    2 RS-232 connectors, signals: RX, TX, RTS, CTS, ground on 9-pin D-sub (M) ports; 1 RS-485 on a detachable terminal block connector
→ Network Protocols    ICMP, ARP (ping), TCP, UDP
→ Power Source    12V DC, <80mA
→ Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
More Information
fc-113.jpg
Kramer: fc-113
HDMI To 3G HD-SDI Format Converter

The FC113 is a high-performance format converter for HDMI signals. The FC113 converts an HDMI input signal to two identical SDI video signals with embedded...

→ Input    1 HDMI connector
→ Outputs    2 SD/HD-SDI, 3G HD-SDI on BNC connectors
→ Max. Data rate    Up to 3Gbps
→ Standard Compliance    HDMI
→ Input Formats    525i, 625i; 1080p @23.98/24/25/29.97/30/50/59.94/60; 1080i @50/59.94/60; 720p @50/59.94/60
More Information
fc29.jpg
Kramer: fc-29
IR Learner

The FC-29 learns and stores IR (infrared) commands on a PC via a USB connection. The stored IR commands can be uploaded later to multiple room
More Information
fc-31xl.jpg
Kramer: fc-31xl
Computer Graphics Video To DVI Format Converter

The FC31xl is a high-performance format converter for computer graphics signals with resolutions up to and including WUXGA. The FC 31xl converts a computer...

→ Input    1 UXGA on a 15-pin HD connector
→ Output    1 DVI , 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
→ Supported Resolutions    640x480 @60Hz/72Hz/75Hz/85Hz; 720x400 @70Hz/85Hz; 800x600 @56Hz/60Hz/72Hz/75Hz/85Hz; 848x480 @60Hz; 1024x768 @60Hz/72Hz/75Hz/85Hz; 1152x864 @75Hz; 1280x768 @60Hz (RB)/75Hz/85Hz; 1280x800 @60Hz; 1280x960 @60Hz/85Hz; 1280x1024 @60Hz/75Hz/85Hz; 1360x768 @60Hz; 1400x1050 @60Hz(RB)/75Hz; 1440x900 @60Hz; 1440x1050 @60Hz; 1600x1200 @60Hz; 1680x1050 @60Hz; 1920x1080 @60Hz; 1920x1200 @60Hz(RB)
→ DVI Bandwidth    1.65GHz
→ Controls    DIP-switches
More Information
fc-32.jpg
Kramer: fc-32
DVI To Computer Graphics/Component/HDTV Video Format Converter

The FC32 is a high-performance format converter for DVI-D signals. The FC 32 converts (without scaling) a DVI-D input to a computer graphics or component video...

→ Input    1 DVI-D, 1.2Vpp on a Molex 24-pin (F) connector, DDC signal 5Vpp (TTL)
→ Outputs    1 VGA or YPbPr on a 15-pin HD (F) connector; YPbPr is with bi-level sync
→ Resolution    Up to WUXGA, 1080p
→ Control    Switch for RGB/YPbPr selection
→ Power Source    5V DC, 490mA
More Information
fc-321.jpg
Kramer: fc-321
2x1 3G HD-SDI To HDMI Format Converter

The FC321 is a high-performance format converter for 3G HD-SDI signals. The FC 321 converts one of two 3G HD-SDI signals to an HDMI output signal with the same...

→ Inputs    2 SDI, HD-SDI, 3G HD-SDI on a BNC connector
→ Output    1 HDMI connector
→ Max. Data Rate    Up to 3Gbps
→ Standard Compliance    HDMI
→ Indicator LEDs    SD/HD, OUT, ON
More Information
fc-322.jpg
Kramer: fc-322
2x1:2 3G HD-SDI To HDMI Format Converter

The FC322 is a high-performance format converter for 3G HD-SDI signals. The FC 322 converts one of two 3G HD-SDI signals to two HDMI output signals with the same...

→ Inputs    2 SDI, HD-SDI, 3G HD-SDI on BNC connectors
→ Outputs    2 HDMI connectors
→ Max. Data Rate    Up to 3Gbps
→ Standard Compliance    HDMI
→ Indicator LEDs    SD/HD, OUT, ON
More Information
fc-331.jpg
Kramer: fc-331
3G HD-SDI To HDMI Format Converter

The FC331 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 331 converts the input video format (with embedded audio) to an HDMI...

→ Input    1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
→ Outputs    1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector, 1 HDMI connector
→ Max. Data Rate    Up to 3Gbps
→ Standard Compliance    HDMI
→ Indicator LEDs    SD/HD, OUT, ON
More Information
fc-332.jpg
Kramer: fc-332
3G HD-SDI To HDMI Format Converter

The FC332 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 332 converts the input video format (with embedded audio) to two HDMI...

→ Input    1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
→ Outputs    1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector; 2 HDMI connectors
→ Max. Data Rate    Up to 3Gbps
→ Standard Compliance    HDMI
→ Indicator LEDs    SD/HD, OUT, ON
More Information
fc340.jpg
Kramer: fc-340
3G HD−SDI Scan Converter

The FC−340 is a broadcast−quality video scaler, audio embedder/de−embedder and scan converter for digital video signals up to 3G HD−SDI. The unit inputs an SDI signal and...
More Information
fc-400.jpg
Kramer: fc-400
(discontinued) Time Base Corrector, Synchronizer & Format Converter

This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.

 

The FC400...

→ Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors
→ Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4- pin connector
→ Video Standards    NTSC (3.58) or PAL-B (DIP-switch selectable). No standards conversion
→ Digital Resolution    10 bits
→ Bandwidth (-0.5dB)    5MHz
More Information
fc4002.jpg
Kramer: fc-4002
Analog Video Transcoder

The FC−4002 is a high−performance broadcast quality, universal video transcoder for analog video signals. It converts a composite video, s−Video (Y/C) or component video...
More Information
no-image.jpg
Kramer: fc-46h2
Kramer FC-46H2 4K HDR HDMI Audio De–embedder

Kramer's FC−46H2 is a professional HDMI audio de−embedder for HDMI signals up to 4K@60Hz (4:4:4) resolution. The unit de−embeds the audio signal from the HDMI input or from...
More Information
fc-46xl.jpg
Kramer: fc-46xl
(discontinued) HDMI Audio De-embedder

This item is DISCONTINUED.  For alternate solution see Kramer FC-46H2

 

The...

→ Input    1 HDMI connector
→ Outputs    1 HDMI connector, 1 TOSLINK® optical digital audio connector, 1 S/PDIF digital audio on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini connector
→ Operation Frequency    Supports up to 2.25Gbps (1080p @60Hz) 36-bit Deep Color
→ Compliance with Standards    Supports HDMI, HDCP 1.4
→ Controls    Audio source select button
More Information
fc-49.jpg
Kramer: fc-49
DVI & Audio To HDMI Format Converter & Audio Embedder
→ Input    1 DVI-D, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp; 1 S/PDIF (digital audio) on an RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 TOSLINK® optical connector
→ Output    HDMI connector
→ Compliance with HDMI Standard    Supports DVI 1.0, HDMI, and HDCP
→ Operation Frequency    Supports up to 1.65Gbps (UXGA, 1080p)
→ Controls    EDID button
More Information
fc-7402.jpg
Kramer: fc-7402
SDI To Multi-Format Analog Video Format Converter & Processor

The FC7402 is a format converter for SDI (SMPTE 259M) signals. The FC 7402 converts an SDI video signal to composite video, s-Video (Y/C), and RGB/component (RGsB...

→ Input    1 SDI: SMPTE 259M, ITU-R BT.601 (CCIR-601), 75Ω on a BNC connector
→ Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (luma), 0.3Vpp/75Ω (chroma) on a 4-pin connector; 1 component: RGB/Y, R-Y, B-Y (1V, 0.7V, 0.7V/75Ω) on BNC connectors; 1 SDI (reclocked): SMPTE 259M, ITU-R BT.601 (CCIR-601) 75Ω on a BNC connector
→ Resolution    10-bit
→ Bandwidth (-3dB)    5.7MHz
→ Non-Linearity    /-1.0%
More Information
fc-7501.jpg
Kramer: fc-7501
Multi-Standard Composite Video, S-Video & Component Video To SDI Format Converter

The FC-7501 is a format converter for composite video, s-Video or component video (YUV) signals. The FC7 501 converts either PAL, SECAM, and NTSC composite video,...

→ Input    1 composite video: 1Vpp/75Ω (Y) looping on BNC connectors with a termination switch; 1 (B-Y): 0.7Vpp/75Ω looping on BNC connectors with a termination switch; 1 (R-Y)/C 0.7Vpp/0.3Vpp/75Ω looping on BNC connectors with a termination switch
→ Outputs    2 SDI on BNC connectors
→ Video Standards    CV, Y/C: NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L)
→ Bandwidth (-3dB)    6MHz
→ Resolution    10 bits
More Information
kds-en1.jpg
Kramer: kds-en1
H.264 HD IP Encoder

The KDS−EN1 is an H.264−based encoder for digital signals up to 3G HD−SDI, composite and component video, HDMI and balanced audio. All signals are encoded and transmitted as...
More Information
kds-en2r.jpg
Kramer: kds-en2r
HDMI over IP Receiver

The KDS−EN2R is an IP−based receiver for HDMI signals. Using JPEG2000 compression technology, the KDS−EN2R receives a visually lossless HD image with...
More Information
kw11.jpg
Kramer: kw-11
(discontinued) Wireless HDMI Trans/Receiver

This item is DISCONTINUED.  For alternate solutuion see Kramer KW-14.

 

The...
More Information
no-image.jpg
Kramer: kw-14
Kramer KW-14 Wireless HD Transmitter & Receiver

Kramer KW-14 Wireless HD Transmitter & Receiver system.

The Kramer KW−14T and KW−14R are a high−definition, wireless, HDMI...
More Information
mv6.jpg
Kramer: mv-6
3G HD-SDI 6-Input Multi-Viewer

The MV−6 is a versatile, high−performance multiviewer for 3G HD−SDI video signals. The device can display up to six inputs in any combination and output the image in SDI,...
More Information
pip-4.jpg
Kramer: pip-4
4 Composite Video Picture-in-Picture Inserter

The PIP4 is a high-performance picture-in-picture inserter for composite video signals. The PIP 4 output can display up to four images simultaneously, each of...

→ Inputs    4 composite video 1Vpp @75Ω on BNC connectors
→ Outputs    1 s-Video 1Vpp, 0.3Vpp/75Ω on a 4-pin s-Video connector; 1 composite video 1Vpp/75Ω on a BNC connector
→ Digital Resolution    10 bit
→ Video Bandwidth    5.4MHz
→ K-Factor    0.9%
More Information
pl50.jpg
Kramer: pl-50
5-Channel AC Power Controller

The PL−50 is a power controller that monitors and controls up to five power channels by detecting the power status of the connected units. Using an embedded Web server, the unit...
More Information
ps1dvi.jpg
Kramer: ps-1dvi
Power Supply-FODM/FODM Cable

The PS−1DVI is a high−performance power supply for DVI cables. It provides 5V DC on pin 14 of the DVI plug for applications where power is not provided by the DVI
More Information
pt100.jpg
Kramer: pt-100
VGA Twisted Pair Equalizer

The PT−100 is a high−performance line equalizer for computer graphics video over twisted pair signals. The unit provides level and equalization controls for signals that...
More Information
pt-101h4.jpg
Kramer: pt-101h4
HDMI Repeater And Format Converter

The PT101H4 is a high-performance repeater and format converter for HDMI signals. The PT 101H4 combines previous HDMI formats and Ethernet to provide HDMI (v1.4...

→ Input    1 HDMI connector, 1 Ethernet on an RJ-45 TP connector
→ Outputs    1 HDMI connector, 1 S/PDIF on an RCA connector
→ Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard    Input: HDMI; output: HDMI and HDCP
→ Power Source    5V DC, 450mA
More Information
pt-101hdcp.jpg
Kramer: pt-101hdcp
(discontinued) DVI Repeater

This item is no longer available.

 

The PT101HDCP is a line driver/repeater for DVI-D video signals. The PT 101HDCP reclocks...

→ Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
→ Output    1 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
→ Bandwidth    Supports up to 2.25Gbps bandwidth
→ Power Source    5V DC, 180mA
→ Dimensions    6.22cm x 5.23cm x 3.20cm (2.5" x 2.1" x 1.3") W, D, H
More Information
pt-101hxl.jpg
Kramer: pt-101hxl
HDMI Repeater

The PT101Hxl is a line driver/repeater for HDMI video signals. The PT 101Hxl reclocks and equalizes the signal enabling multiple units to be cascaded.

→ Input    1 HDMI connector
→ Output    1 HDMI connector
→ Bandwidth    Supports up to 2.25Gbps bandwidth
→ Compliance With Standards    HDMI, HDCP
→ Power Source    5V DC, 120mA
More Information
pt-102an.jpg
Kramer: pt-102an
1:2 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

→ Input    1 unbalanced stereo audio on a 3.5mm mini jack
→ Outputs    2 unbalanced stereo audio on 3.5mm mini jacks
→ Max. Output Level    5Vpp
→ Bandwidth (-3dB)    >100kHz
→ S/N Ratio    85dB @1kHz
More Information
pt-102sn.jpg
Kramer: pt-102sn
1:2 S-Video Distribution Amplifier

The PT102SN is a high-performance video distribution amplifier for s-Video (Y/C) video signals. The PT 102SN takes one input, provides correct buffering and...

→ Input    1 s-Video on a 4-pin connector
→ Outputs    2 s-Video on 4-pin connectors
→ Max. Output level    1.3Vpp
→ Bandwidth (-3dB)    150MHz
→ Diff. Gain    0.05%
More Information
pt-102vn.jpg
Kramer: pt-102vn
1:2 Composite Video Distribution Amplifier

The PT102VN is a distribution amplifier for composite video or SDI signals. The PT 102VN takes one input, provides correct buffering and isolation and distributes...

→ Inputs    1 Video, 1Vpp/75Ω on A BNC Connector
→ Outputs    2 Video, 1Vpp/75Ω on BNC
→ Max. Video Output    2Vpp
→ Video Bandwidth (-3dB)    430MHz
→ Diff. Gain    0.05%
More Information
pt-103v.jpg
Kramer: pt-103v
1:3 Composite Video Distribution Amplifier

The PT103V is a composite video distribution amplifier. The PT 103V takes one input, provides correct buffering and isolation and distributes the signal to three...

→ Input    1 Video, 1Vpp/75Ω on an RCA Connector
→ Outputs    3 Video, 1Vpp/75Ω on RCA Connectors
→ Max. Output Level    1.9Vpp
→ Bandwidth (-3dB)    407MHz
→ Diff. Gain    0.04%
More Information
pt-110-od.jpg
Kramer: pt-110-od
Computer Graphics Video Over Twisted Pair Transmitter With EDID & EMP Protection

The PT110-od is a twisted pair transmitter for computer graphics video signals. The PT 110-od converts a computer graphics signal into a twisted pair signal that...

→ Input    1 VGA/UXGA on a 15-pin HD connector
→ Output    1 RJ-45 LINE OUTPUT connector
→ Resolution    WUXGA & 1080p
→ S/N Ratio    69dB (worst case)
→ Coupling    AC
More Information
pt-110edid.jpg
Kramer: pt-110edid
Computer Graphics Video Over Twisted Pair Transmitter With EDID

The PT110EDID is a twisted pair transmitter for computer graphics video signals. PT 110EDID converts a computer graphics signal into a twisted pair signal that is...

→ Input    1 VGA/UXGA on a 15-pin HD connector
→ Output    1 RJ-45 LINE OUTPUT connector
→ Resolution    WUXGA & 1080p
→ S/N Ratio    69dB (worst case)
→ Coupling    AC
More Information
pt-120.jpg
Kramer: pt-120
Computer Graphics Video Over Twisted Pair Receiver

The PT120 is a twisted pair receiver for computer graphics video signals. The PT 120 converts a twisted pair signal from a PT-110 transmitter (or other compatible...

→ Input    1 RJ-45 connector
→ Output    1 VGA/UXGA on a 15-pin HD connector
→ Max. Output level    1.5Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    2.9% (worst case)
More Information
no-image.jpg
Kramer: pt-20xl
Kramer PT-120XL Computer Graphics Video over Twisted Pair Receiver

The Kramer PT-120XL is an extended range twisted pair receiver for computer graphics video signals. It converts a twisted pair signal from a WP-110 transmitter (or other...
More Information
pt-1spdif.jpg
Kramer: pt-1spdif
S/PDIF To TOSLINK® Digital Audio Format Converter

The PT-1SPDIF is a format converter for S/PDIF digital audio signals. It converts an S/PDIF signal to a TOSLINK® optical

→ Input    1 S/PDIF (digital audio) on an RCA connector
→ Output    1 Optical (digital audio) on a TOSLINK® connector
→ Sampling    32kHz to 192kHz
→ Power Source    12V DC, 50mA
→ Dimensions    4.27cm x 2.2cm x 5.64cm (1.68" x 0.87" 2.22") W, D, H
More Information
pt-201vga.jpg
Kramer: pt-201vga
2x1 Computer Graphics Video Mechanical Switcher

The PT201VGA is a high-performance switcher for computer graphics video signals with resolutions up to and exceeding UXGA. The PT 201VGA switches either of two...

→ Inputs    2 analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on 15-pin HD (F) connectors
→ Output    1 analog red, green, blue signals: 0.7Vpp/75Ω, H & V syncs, TTL level, on a 15-pin HD (F) connector
→ Bandwidth (-3dB)    1200MHz
→ Dimensions    6cm x 6.5cm x 2.5cm (2.36" x 2.56" x 1") W, D, H
→ Weight    0.14kg (0.31lbs) approx
More Information
pt-4irex.jpg
Kramer: pt-4irex
Infrared Repeater With External IR Sensor Input

The PT4iREX is an infrared signal repeater that can operate at distances of up to approximately 75m (240ft). The PT 4iREX extends infrared signals in areas where...

→ Input    1 IR receiver
→ Outputs    4 IR emitters on 3.5mm mini connectors
→ Power Source    12V DC, 95mA
→ Dimensions    6.22cm x 5.24cm x 2.41cm (2.45" x 2.06" x 0.95") W, D, H
→ Weight    0.15kg (0.55lbs) approx
More Information
pt-571.jpg
Kramer: pt-571
HDMI Over Twisted Pair Transmitter

The PT571 is a twisted pair transmitter for HDMI signals. The PT 571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted...

→ Inputs    1 HDMI connector
→ Outputs    1 RJ-45 connector
→ Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard    Supports HDMI 1.3 and HDCP
→ Power Source    12V DC, 250mA (transmitter and receiver together)
More Information
pt-571hdcp.jpg
Kramer: pt-571hdcp
DVI Over Twisted Pair Transmitter

The PT571HDCP is a twisted-pair transmitter for DVI signals. The PT 571HDCP converts the DVI to twisted pair signal and the PT-572HDCP converts the twisted pair...

→ Inputs    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector
→ Outputs    1 CAT 5 OUT on an RJ-45 connector
→ Bandwidth    Up to 1.65Gbps; WUXGA, 1920x1080p
→ Power Source    12V DC, 250mA (transmitter and receiver together)
→ Dimensions    6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
More Information
pt572pl.jpg
Kramer: pt-572-plus
HDMI Twisted Pair Receiver

The PT−572+ is a DGKat™ twisted pair receiver for HDMI signals. The PT−571 converts an HDMI signal to a single twisted pair signal and the PT−572+...
More Information
pt-572hdcp-plus.jpg
Kramer: pt-572hdcp-plus
DVI Over Twisted Pair Receiver

The PT572HDCP is a DGKat™ twisted-pair receiver for DVI signals. The PT-571HDCP converts the DVI to twisted pair signal and the PT 572HDCP converts the twisted...

→ Inputs    1 DGKat twisted pair on an RJ-45 connector
→ Outputs    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector, DDC signal 5Vpp (TTL)
→ Bandwidth    Supports up to 1.65Gbps
→ Power Source    12V DC, 250mA
→ Dimensions    6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
More Information
pt-2spdif.jpg
Kramer: pt-s2pdif
Toslink to S/PDIF Converter

The PT-2SPDIF is a format converter for S/PDIF digital audio signals. It converts an S/PDIF signal to a TOSLINK® optical
More Information
rc108.jpg
Kramer: rc-108
8-Button Controller

The RC-108 is a presentation controller for twisted pair transmitters. The unit can switch up to 8 sources that are interconnected in series through looping inputs to a single...
More Information
rc116.jpg
Kramer: rc-116
8-Button Controller

The RC-116 is a presentation controller for twisted pair transmitters. The unit can switch up to 16 sources that are interconnected in series through looping inputs to a single...
More Information
rc-2.jpg
Kramer: rc-2
Wall Plate - RS-232 Controller

The RC2 is a 2-button controller that sends a series of RS-232 commands with the push of a button. The RC 2 operates serial devices such as projectors, displays &...

→ Ports    1 RS-232 on a terminal block connector
→ Power Source    12V DC, 40mA
→ Dimensions    7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H
→ Weight    0.3kg (0.67lbs) approx
→ Accessories    Power supply
More Information
rc-2c.jpg
Kramer: rc-2c
Wall Plate - RS-232 & IR Controller

The RC2C is a 2-button controller that sends a series of RS-232 or IR commands with the push of a button. The RC 2C operates serial or IR-controlled devices such...

→ Ports    1 RS-232 on a terminal block connector; IR OUT on a terminal block connector
→ Power Source    12V DC, 40mA
→ Dimensions    7.9cm x 1.59cm x 12.4cm (3.12" x 0.63" x 4.88") US; 8.6cm x 1.59cm x 8.6cm (3.39" x 0.63" x 3.39") and 8cm x 1.59cm x 8cm (3.15" x 0.63" x 3.15") EU W, D, H
→ Weight    0.3kg (0.67lbs) approx
→ Accessories    Power supply
More Information
rc-3tb.jpg
Kramer: rc-3tbu
3-Button Remote Control Panel

The RC−3TBU remotely replicates the buttons of the SL−14RC/SL−14RCN master room
More Information
rc-53d.jpg
Kramer: rc-53d
K-NET™ Auxiliary Control Panel

The RC−53D is a 6−button auxiliary control panel. It works with master room controllers such as the SL Series Master Room Controllers via the K−NET™ communication link to...

→ Ports    2 K-NET™ on terminal block connectors; 1 RS-232 on terminal block connectors, 1 USB connector
→ Power Source    12V DC, 140mA over K-NET™
→ Fuse    500mA, FSMD 1812
→ Adapter    SummitView™ kits: 12V, 5A
→ Dimensions    11.4cm x 2.6cm x 11.4cm (4.49" x 1.02" x 4.49")US; 15.2cm x 1.9cm x 8.6cm (5.98" x 0.75" x 3.39") and 15.2cm x 1.9cm x 8cm (5.98" x 0.75" x 3.15") EU W, D, H
More Information
rc53dlc.jpg
Kramer: rc-53dlc
6-Button K-NET Auxiliary Control Panel

The RC−53DLC is a 6−button auxiliary control panel. It works with master room controllers, such as the Kramer SummitView™ BrainBox or the SL Series Master Room Controllers...
More Information
rc54dl.jpg
Kramer: rc-54dl
Auxiliary Control Panel

The RC−54DL is a 12−button auxiliary control panel that works as a remote control panel for master room controllers such as the RC−74DL in classrooms, boardrooms or...
More Information
rc5b2.jpg
Kramer: rc-5b2
2−Button Aux Control Panel

The RC−5B2 is an 2−button auxiliary control panel with backlit RGB buttons. It can be used as an auxiliary controller when connected via K−NET™ to a master room controller...
More Information
rc5b4.jpg
Kramer: rc-5b4
4−Button Aux Control Panel

The RC−5B4 is a 4−button auxiliary control panel with backlit RGB buttons. It can be used as an auxiliary controller when connected via K−NET™ to a master room controller...
More Information
rc-62.jpg
Kramer: rc-62
6-Button Room Controller With Printed Group Labels

The RC62 is a 6-button room controller for multimedia rooms. The RC 62 can function either as a stand alone controller or as part of the SummitView™ system to...

→ Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
→ Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
→ Power Source    12V DC, 100mA
→ Adapter    SummitView™ kits: 12V, 5A; independent: 12V/500mA
→ Dimensions    6.9cm x 2.9cm x 11.4cm (2.71" x 1.14" x 4.49") US; 15.2cm x 2.3cm x 8.6cm (5.98" x 0.9" x 3.39") and 15.2cm x 2.3cm x 8cm (5.98" x 0.9" x 3.15") EU W, D, H
More Information
rc-63a.jpg
Kramer: rc-63a
6-Button Room Controller With Analog Volume Knob & Printed Group Labels

The RC63A is a 6-button room controller with an analog volume knob for multimedia rooms. The RC 63A functions either as a standalone controller or as part of the...

→ Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
→ Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
→ Power Source    12V DC, 100mA
→ Fuse    500mA, FSMD 2920
→ Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
More Information
rc-63al.jpg
Kramer: rc-63al
6-Button Room Controller With Analog Volume Knob & LCD Group Labels

The RC63AL is a 6-button room controller with an analog volume knob for multimedia rooms. The RC 63AL functions either as a standalone controller or as part of...

→ Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
→ Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1
→ Source   
→ Fuse    500mA, FSMD 2920
→ Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
More Information
rc-63d.jpg
Kramer: rc-63d
6-Button Room Controller With Digital Volume Knob & Printed Group Labels

The RC63D is a 6-button room controller with a digital volume knob for multimedia rooms. The RC 63D can function either as a standalone controller or as part of...

→ 6 Programmable Buttons    Color, back-lit & label capable
→ Printed Group Labels    For programmable back-lit LCD group labels, order the RC-62DL
→ Volume    Digital Volume Control Knob
→ Programming    6 Programmable-Color, Back Lit & Label Capable Buttons. User-friendly appearance
→ Macro Capability    Carry out multiple commands with a single press of a button
More Information
rc-63dl.jpg
Kramer: rc-63dl
6-Button Room Controller With Digital Volume Knob & LCD Group Labels

The RC63DL is a 6-button room controller with a digital volume knob for multimedia rooms. The RC 63DL is part of the SummitView™ system to control audio...

→ Ports    1 RS-232 on terminal block connectors; 2 K-NET on terminal block connectors; 1 USB port
→ Output    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 1 IR emitter on terminal block connectors
→ Power Source    12V DC, 140mA
→ Fuse    500mA, FSMD 2920
→ Adapter    SummitView™ kits: 12V, 5A; independent: 12V, 500mA
More Information
rc-6ir.jpg
Kramer: rc-6ir
6-Button Universal Room Controller With IR Learning

The RC6iR is a 6-button room controller for multimedia rooms. The RC 6iR controls audio components, video components, and other room facilities such as lights and...

→ Ports    2 RS-232 on terminal block connectors; 1 RS-485 on terminal block connectors; 1 Ethernet RJ-45 port
→ Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 2 IR emitters on terminal block connectors
→ Power Source    12V DC, 155mA
→ Dimensions    6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H
→ Weight    0.3kg (0.67lbs) approx
More Information
rc-74dl.jpg
Kramer: rc-74dl
12-Button Room Controller

The RC−74DL is a 12−button master room controller with a digital volume knob for multimedia rooms. The unit can function either as a standalone controller or as part of a more...
More Information
rc76.jpg
Kramer: rc-76r
6−Button Room Controller

The RC−76R is a six−button configurable room controller for multimedia rooms. It controls audio components, video components and other room facilities such as lights and...
More Information
rc-78r.jpg
Kramer: rc-78r
8 Button Room Controller

The RC−78R is an eight−button configurable room controller for multimedia rooms. It controls audio components, video components and other room facilities such as lights and...
More Information
rc-8ir.jpg
Kramer: rc-8ir
8-Button Universal Room Controller With IR Learning

The RC8iR is an 8-button room controller for multimedia rooms. The RC 8iR controls audio components, video components and other room facilities such as lights and...

→ Ports    2 RS-232 on terminal block connectors, 1 RS-485 on terminal block connectors, 1 Ethernet RJ-45 port, 2 IR
→ Outputs    2 relays on terminal block connectors (36V AC or DC, 2A, 60V AC maximum on non-inductive load); 2 IR emitters on terminal block connectors (for RC-6IR and RC-8IR)
→ Power Source    12V DC, 155mA
→ Dimensions    6.9cm x 3.14cm x 11.4cm (2.71" x 1.23" x 4.49") US; 15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") and 15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU W, D, H
→ Weight    0.3kg (0.67lbs) approx
More Information
rc-116.jpg
Kramer: rc-ir3
IR Remote Control

The RC−IR3 is an infrared wireless remote control unit for all Kramer IR controllable switchers. The remote can switch up to 96x96 inputs and
More Information
sg-6005xl.jpg
Kramer: sg-6005xl
Multi-Standard Composite Video Black Burst, Color Bar & Audio Tone Generator

The SG6005xl is a broadcast quality black burst, color bar, sync, and audio tone generator for composite video and audio applications. The SG 6005xl outputs ten...

→ Inputs    1 REF (genlock), looping, 1Vpp/75Ω, on BNC connectors with a termination switch
→ Outputs    10 composite video on BNC connectors, globally configurable: black burst 0.3Vpp/75Ω (sync) or 1Vpp/75Ω max (color bar); 1 balanced stereo audio on 2 XLR connectors, 12dBu max; 1 unbalanced stereo audio on 2 RCA connectors, 6dBu max; 2 AES/EBU digital audio on XLR connectors, 0dBFS max; 2 AES-3id (75Ω) digital audio on BNC connectors, 0dBFS max
→ Video Standards    PAL, NTSC
→ Color Bar    8 selectable patterns
→ Stability    1ppm
More Information
si-1vga.jpg
Kramer: si-1vga
Remote Control Step-In Module Insert

The SI1VGA is a step-in remote control insert module for VGA and unbalanced stereo audio signals. The SI 1VGA module fits into a Kramer TBUS-10 Table Connection...

→ Inputs    1 VGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
→ Outputs    1 VGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
→ Control    Front panel push button
→ Dimensions    8.9cm x 3.1cm x 2.4cm (3.5" x 1.2" x 0.94") W, D, H
→ Weight    0.2kg (0.44lbs) approx
More Information
sid-dp.jpg
Kramer: sid-dp
DP DGKat TP Step-In Module

The SID−DP is a DGKat™ twisted pair transmitter and step−in commander for DisplayPort and unbalanced stereo audio signals. The unit includes a “Step−In” button that...
More Information
sid-dvi.jpg
Kramer: sid-dvi
DVI DGKat TP Step-In Module

The SID−DVI is a DGKat™ twisted pair transmitter and step−in commander for DVI and unbalanced stereo audio signals. The unit includes a “Step−In” button that allows...
More Information
sid-h.jpg
Kramer: sid-h
HDMI DGKat TP Step-In Module

The SID−H is a DGKat™ twisted pair transmitter and step−in commander for HDMI and unbalanced stereo audio signals. The unit includes a “Step−In” button that allows the...
More Information
sid-vga.jpg
Kramer: sid-vga
XGA over TPair Step-In Module

The SID−VGA is a DGKat™ twisted pair transmitter and step−in commander for computer graphics video and unbalanced stereo audio signals. The unit includes a “Step−In”...
More Information
sid-x1.jpg
Kramer: sid-x1
4-Input TP Step-In Module

The SID−X1 is a DGKat™ twisted pair transmitter and step−in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit...
More Information
sl-1.jpg
Kramer: sl-1
Master Room Controller

The SL1 is a master room controller. The SL 1 controls audio components, video components and other room facilities such as lights and screens.

→ Ports    2 RS-232 and 1 K-NET™ on terminal block connectors; Ethernet on an RJ-45 connector; 1 infrared sensor, 1 infrared on a 3.5mm mini jack connector; 1 USB for programming
→ Outputs    2 infrared and 3 relays (36V AC or DC, 2A, 60V AC maximum on non-inductive load) on terminal block connectors
→ Default IP Settings    IP number = 192.168.1.39; Mask = 255.255.0.0; Gateway = 0.0.0.0
→ Indicators    LED indicator for each function
→ Power Source    12V DC, 2A (from power supply) or 12V DC over K-NET™ connection
More Information
sl10.jpg
Kramer: sl-10
Master Room Controller

The SL−10 is a master room controller. It controls audio components, video components and other room facilities such as lights and
More Information
sl-12.jpg
Kramer: sl-12
Master Room Controller

The SL−12 is a highly versatile control processor for AV equipment —especially projectors and associated equipment in any room (such as classrooms, boardrooms, or...

→ Ports    4 RS-232, RS-485, 4 GPI/O and K-NET™ on terminal block connectors; Ethernet on an RJ-45 connector; 1 infrared sensor, 2 infrared on 3.5mm mini jacks; 1 USB for programming
→ Outputs    4 infrared, 8 relays (36V AC or DC, 2A, 60V AC maximum on non-inductive load)
→ Default IP Settings    IP number = 192.168.1.39; Mask = 255.255.0.0; Gateway = 0.0.0.0
→ Indicators    LED indicator for each function
→ Power Source    12V DC, 2A (from power supply) or 12V DC over K-NET™ connection
More Information
sl14rcn.jpg
Kramer: sl-14rcn
Master Room Controller

The SL−14RCN is a highly versatile master room controller that acts as an all−in−one extended remote control panel for AV equipment. Optional 3−button remote control...
More Information
sp-12hd.jpg
Kramer: sp-12hd
(discontinued) Multi-Format Analog & HD-SDI Video Processor/ProcAmp/TBC/Format Converter

This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.

 

The SP12HD...

→ Inputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 1 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on a BNC connector
→ Outputs    1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω(Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 2 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on BNC connectors
→ Bandwidth    0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV), fully loaded
→ S/N Ratio    60dB
→ Standards    CVBS (SDTV): PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM; EDTV: 480p/60, 576p/50; HDTV: 720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080psf/23.98, 1080psf/24, 1080psf/25, 1080psf/29.97 and 1080psf/30
More Information
sp4d.jpg
Kramer: sp-4d
4−Channel HD−SDI Synchronizer

The SP−4D is a synchronizer for serial digital signals up to HD−SDI. The unit synchronizes up to four channels from the dedicated genlock input or any other specified...
More Information
tp-10.jpg
Kramer: tp-10
Composite Video, S-Video & Stereo Audio Over Twisted Pair Receiver With IR Repeater

The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video...

→ Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
→ Output    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector
→ Max. Output Level    Video: 2.6V; Audio: 4.6Vpp
→ Bandwidth    Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB
→ Non-Linearity    <0.05%
More Information
tp-100axr.jpg
Kramer: tp-100axr
Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-100AXR is a twisted pair transmitter for computer graphics video and unbalanced stereo signals. The TP 100AXR converts the input signals into a twisted...

→ Inputs    1 VGA on a 15-pin HD connector, 1 analog audio on a 3.5mm mini jack
→ Outputs    2 RJ-45 OUT connectors, 1 VGA loop on a 15-pin HD connector, 1 analog audio loop out on a 3.5mm mini jack
→ Resolution    Up WUXGA & 1080p
→ Bandwidth (-3dB)     20kHz
→ S/N Ratio    Video: 60dB; Audio: <89dB
More Information
tp-102hd.jpg
Kramer: tp-102hd
Computer Graphics Video & HDTV Over Twisted Pair Transmitter

The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 102HD converts a computer graphics video or HDTV signal on a...

→ Input    1 XGA/HD on a 15-pin HD (F) connector
→ Outputs    2 RJ-45 connectors
→ Max. Output Level    1.7Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    0.75%
More Information
tp-104hd.jpg
Kramer: tp-104hd
1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-104HD is a twisted pair transmitter for computer graphics signals. The TP 104HD converts a computer graphics video signal into four twisted pair...

→ Input    1 VGA/UXGA on a 15-pin HD connector
→ Outputs    4 RJ-45 OUT connectors
→ Max. Output Level    1.4Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    3.2%
More Information
tp-105hd.jpg
Kramer: tp-105hd
1:2 Twisted Pair Line Driver & Distribution Amplifier

The TP-105HD is a line driver and distribution amplifier for analog video over twisted pair signals. The TP 105HD takes a twisted pair input and distributes it to...

→ Input    1 RJ-45 connector
→ Outputs    2 RJ-45 connectors
→ Max Output Level    1.6Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain (PAIR)    1.2%
More Information
tp-112hd.jpg
Kramer: tp-112hd
1:2 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-112HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 112HD converts a computer graphics video or HDTV signal on a...

→ Input    1 XGA/HD on a 15-pin HD (F) connector
→ Outputs    2 twisted pair on RJ-45 connectors
→ Max. Output Level    1.7Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    4%
More Information
tp-114.jpg
Kramer: tp-114
1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-114 is a high-performance distribution amplifier for computer graphics video or HDTV signals. The TP 114 converts a computer graphics video or HDTV signal...

→ Input    1 XGA on a 15-pin HD (F) connector
→ Outputs    1 XGA on a 15-pin HD (F) connector; 4 twisted pair on RJ-45 OUT connectors
→ Max. Output Level    1.8Vpp (XGA), 1.6Vpp (CAT 5)
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    0.03% (XGA), 7% (CAT 5)
More Information
tp-120.jpg
Kramer: tp-120
Computer Graphics Video Over Twisted Pair Receiver

The TP-120 is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

→ Input    1 RJ-45 line in
→ Output    1 VGA/UXGA on a 15-pin HD connector
→ Max. Output Level    1.4Vpp
→ Max. Resolution    WUXGA & 1080p
→ S/N Ratio    80dB
More Information
tp-120-od.jpg
Kramer: tp-120-od
Computer Graphics Video Over Twisted Pair Receiver With EMP Protection

The TP-120-OD is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

→ Input    1 RJ-45 line in
→ Output    1 VGA/UXGA on a 15-pin HD connector
→ Max. Output Level    1.4Vpp
→ Max. Resolution    WUXGA & 1080p
→ S/N Ratio    80dB
More Information
tp-121edid.jpg
Kramer: tp-121edid
Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter With EDID

The TP-121EDID is a high-performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. The TP 121EDID converts the input...

→ Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
→ Output    1 CAT 5 RJ-45 OUT connector
→ Audio Bandwidth (-3dB)    20Hz to 20kHz @0.5dB
→ Resolution    Up to WUXGA and 1080p
→ S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB
More Information
tp121xl.jpg
Kramer: tp-121xl
VGA/A Twisted Pair Transmitter

The TP−121xl is a high−performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a twisted pair...
More Information
tp-122.jpg
Kramer: tp-122
Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver
The TP-121 and TP122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video...
→ Input    1 RJ-45 line in connector
→ Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
→ Max. Output Level    Video: 1V; Audio: 2.5V
→ Max. Resolution    WUXGA & 1080p
→ S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
More Information
tp-122-od.jpg
Kramer: tp-122-od
Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver With EMP Protection

The TP-122-od is a twisted pair receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121-od transmitter converts computer graphics video and unbalanced...

→ Input    1 RJ-45 line in connector
→ Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
→ Max. Output Level    Video: 1V; Audio: 2.5V
→ Max. Resolution    WUXGA & 1080p
→ S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
More Information
tp-122xl.jpg
Kramer: tp-122n
XGA & Audio TPair Receiver

The TP−122N is a twisted pair receiver for computer graphics video, unbalanced stereo and S/PDIF audio signals. The unit receives a twisted pair signal from the TP−121EDID...
More Information
tp122xl.jpg
Kramer: tp-122xl
VGA/A Twisted Pair Receiver

The TP−122xl is a high−performance twisted pair receiver for computer graphics video and unbalanced stereo audio signals. It converts the twisted pair input signal to WUXGA...
More Information
tp-123-od.jpg
Kramer: tp-123-od
Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-123-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The...

→ Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
→ Output    1 RJ-45 OUT connector
→ Control    RS-232 2-pin terminal block
→ RS-232 Baud Rate    Up to 19200kbps
→ Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
More Information
tp-123edid.jpg
Kramer: tp-123edid
Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID

The TP-123EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The...

→ Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
→ Output    1 RJ-45 OUT connector
→ Control    RS-232 2-pin terminal block
→ RS-232 Baud Rate    Up to 19200kbps
→ Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
More Information
tp-124.jpg
Kramer: tp-124
Computer Graphics Video, Stereo & S/PDIF Audio & Data Over Twisted Pair Receiver

The TP-124 is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs...

→ Input    1 RJ-45 OUT connector
→ Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
→ Max. Output Level    Video: 1V; Audio: 2.5V
→ Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
→ Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
More Information
tp-124-od.jpg
Kramer: tp-124-od
Computer Graphics Video, Stereo & S/PDIF Audio & RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-124-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123-od converts computer graphics, audio, and RS-232...

→ Input    1 RJ-45 OUT connector
→ Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio Analog 3.5mm mini jack
→ Max. Output Level    Video: 1V; Audio: 2.5V
→ Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
→ Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
More Information
tp-125-od.jpg
Kramer: tp-125-od
Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-125-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The TP...

→ Inputs    1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
→ Output    1 RJ-45 OUT connector
→ Control    RS-232 2-pin terminal block
→ RS-232 Baud Rate    Up to 19200kbps
→ RS-232 Mode    Full-duplex
More Information
tp-125edid.jpg
Kramer: tp-125edid
Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID

The TP-125EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The...

→ Inputs    1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
→ Output    1 RJ-45 OUT connector
→ Control    RS-232 2-pin terminal block
→ RS-232 Baud Rate    Up to 19200kbps
→ RS-232 Mode    Full-duplex
More Information
tp125xl.jpg
Kramer: tp-125xl
XGA Twisted Pair Transmitter

The TP−125xl is an extended range twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. It converts...
More Information
tp-126-od.jpg
Kramer: tp-126-od
Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-126-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and bi-directional RS-232 data signals. The TP 126-od receives a...

→ Inputs    1 RJ-45 LINE IN connector
→ Outputs    Video: 1 UXGA on a 15-pin HD connector; Audio: 1 S/PDIF on an RCA connector, 1 audio ANALOG on a 3.5mm mini jack
→ Max. Output Level    Video: 1.6V, Audio: 2.3V
→ Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBm (130m) @50MHz
→ RS-232 Baud Rate    Up to 19200bps
More Information
tp126xl.jpg
Kramer: tp-126xl
XGA Twisted Pair Receiver

The TP−126xl is an extended range twisted pair receiver for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. The unit...
More Information
tp−219hd.jpg
Kramer: tp-129hd
2x1 XGA/HD Twisted Pr Trans

The TP−219HD is a high−performance twisted pair transmitter for computer graphics signals with resolutions up to and exceeding UXGA as well as HDTV signals up to 1080p. It...
More Information
tp133.jpg
Kramer: tp-133
VGA/A/DATA TP Transmitter

The TP−133 is a high−performance, extended range twisted pair transmitter for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232 data...
More Information
tp134.jpg
Kramer: tp-134
VGA/A/DATA TP Receiver

The TP−134 is a high−performance, extended range twisted pair receiver for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232 data signals....
More Information
tp-141.jpg
Kramer: tp-141
Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

→ Inputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio analog 3.5mm mini jack
→ Outputs    1 RJ-45 OUT connector
→ Max. Output Level    Video = 1V; Audio = 2.5V
→ Bandwidth (-3dB)    Audio: 20Hz–20kHz @0.5dB
→ Resolution    Exceeding UXGA
More Information
tp-142.jpg
Kramer: tp-142
Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

→ Inputs    1 RJ-45 LINE IN connector
→ Outputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio S/PDIF RCA connector, 1 audio analog 3.5mm mini jack
→ Max. Output Level    Video: 1V, Audio: 2.5V
→ Controls    Level: –7.5dB to 4.4dB
→ EQ    0dB to 33dBm, (130m) @50MHz
More Information
tp-185.jpg
Kramer: tp-185
8-Channel Computer Graphics Video, Audio & Data Over Twisted Pair Transmitter

The TP-185 is a twisted pair transmitter for computer graphics, unbalanced stereo audio and RS-232/RS-485 signals. The TP 185 takes up to eight channels of...

→ Inputs    8 UXGA on 15-pin HD connectors (VGA through WUXGA, supporting HDTV and component (YPbPr) signals); 8 unbalanced stereo audio 3.5mm mini jacks
→ Outputs    8 TP on RJ-45 connectors
→ Range    Up to 100m (328ft)
→ Resolution    Up to WUXGA (1920 x 1200)
→ Max. Output Level    Video: 1.6Vpp; Audio: 2.3Vpp
More Information
tp-200axr.jpg
Kramer: tp-200axr
Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-200AXR is a twisted pair receiver for computer graphics video and unbalanced stereo signals. The TP-100AXR converts the input signals into a twisted pair signal and the...

→ Inputs    1 RJ-45 LINE IN connector
→ Outputs    1 RJ-45 line loop out, 2 VGA on 15-pin HD connectors, 2 S/PDIF on RCA connectors, 2 audio analog 3.5mm mini jacks
→ Max. Output Level    Video: 1.8V, audio: 2.9V
→ Controls    Level: –7dB to 4dB; EQ.: 0dB to 16dB (60m) @50MHz
→ Resolution    Up to WUXGA
More Information
tp-202.jpg
Kramer: tp-202
Computer Graphics Video Over Twisted Pair Branching Receiver

The TP-202 is a twisted pair branching receiver for computer graphics video signals with resolutions from VGA up to UXGA and higher or HDTV signals. The TP 202...

→ Input    1 CAT 5 on an RJ-45 connector
→ Output    1 CAT 5 on an RJ-45 connector; 2 XGA on 15-pin HD (F) connectors
→ Diff. Gain (PAIR)    2.8%
→ K-Factor    0.1%
→ Max. Resolution    WUXGA & 1080p
More Information
tp-205a.jpg
Kramer: tp-205a
1:5 Computer Graphics Video, Audio, & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-205A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals, and stereo or S/PDIF audio signals. The...

→ Input    Computer graphics video and looping computer graphics video on 15-pin HD connectors, unbalanced stereo audio on a 3.5mm mini jack, S/PDIF on an RCA connector, RS-232 on a terminal block connector
→ Outputs    5 RJ-45 connectors
→ Max. Output Level    Video: 1V; Audio: 2.3V
→ Max. Resolution    WUXGA & 1080p
→ Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
More Information
tp-210.jpg
Kramer: tp-210
1:10 Computer Graphics Video Over Twisted Pair Transmitter With Dual 15-pin HD Outputs

The TP-210 is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The TP 210...

→ Input    1 XGA on a 15-pin HD (F) connector
→ Outputs    2 XGA on 15-pin HD (F) connectors; 10 CAT 5 on RJ-45 connectors
→ Max. Output level    1.9Vpp/1.6Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    0.03% (XGA), 2.5% (CAT 5)
More Information
tp-210a.jpg
Kramer: tp-210a
(discontinued) 1:10 Computer Graphics Video, Audio & RS-232 Twisted Pair Transmitter & Distribution Amplifier

This item is DISCONTINUED.

 

The TP-210A is a high-performance distribution amplifier for computer graphics video signals with resolutions up...

→ Inputs    1 UXGA video on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 RS-232 with 1 RxD line on a terminal block connector
→ Outputs    10 twisted pairs on RJ-45 connectors, 2 UXGA on 15-pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini jacks, 2 S/PDIF on RCA connectors, 2 RS-232 with 2 TxD lines on terminal block connectors
→ Max. Output Level    Video 1.6V; Audio 2.3V
→ Power Outputs    12V DC 0.5A max via each RJ-45 output (PINs 4, 5)
→ Max. Resolution    UXGA & 1080p
More Information
tp-219hd.jpg
Kramer: tp-219hd
2x1 Computer Graphics & HDTV Video Switcher Over Twisted Pair Transmitter

The TP-219HD is a high-performance twisted pair transmitter for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to...

→ Inputs    2 XGA/HD on 15-pin HD (F) connectors. Input Select Button
→ Output    1 CAT 5 on an RJ-45 connector
→ Max. Output Level    1.5Vpp
→ Max. Resolution    WUXGA & 1080p
→ Diff. Gain    2.3%
More Information
tp-300fw.jpg
Kramer: tp-300fw
FireWire® Over Twisted Pair Transmitter/Receiver & Range Extender

The TP-300FW is a twisted pair transmitter or receiver for FireWire® (IEEE 1394) signals. When used as a pair, one converts a FireWire® signal into a twisted pair signal and the...

→ Ports    1 serial 1394 port on a 6-pin connector, 2 CAT 5 ports on RJ-45 connectors
→ Transfer Rate    100Mbps
→ IEEE-1394 Standards    IEEE 1394a-2000, IEEE 1394-1995, IEEE 1394b-2002 at up to 100Mpbs
→ ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)
→ Power Source    12V DC, 60mA
More Information
tp-305a.jpg
Kramer: tp-305a
1:5 Computer Graphics Video, Audio & RS-232 Twisted Pair Receiver & Distribution Amplifier

The TP-305A is a high-performance twisted pair receiver for computer graphics video, audio and RS-232 signals. The TP 305A takes one twisted pair input and...

→ Input    1 LINE IN on an RJ-45 connector
→ Outputs    5 LINE OUT on RJ-45 connectors; 1 UXGA video output on a 15-pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 S/PDIF output on an RCA connector; 1 RS-232 on a 2-pin terminal block connector
→ Max. Output Level    Video: 1.6V; Audio: 2.3V
→ Power Outputs    12V DC, 0.5A max via each RJ-45 output (pins 4, 5)
→ Max. Resolution    WUXGA & 1080p
More Information
tp-330fw.jpg
Kramer: tp-330fw
2-Port Firewire® 400 Over Twisted Pair Range Extender/Hub

The TP-330FW is a twisted pair range extender/hub for FireWire® (IEEE 1394) signals. When used as a pair, one TP 330FW converts a FireWire® signal into a...

→ Ports    2 FireWire® ports on 6-circuit FireWire® 400 connectors; 1 STP/UTP port on an RJ-45 connector
→ Transfer Rate    400Mbps
→ IEEE 1394 Standards    IEEE 1394a-2000, IEEE 1394-1995 @400Mbps max
→ ESD Line Protection    IEC 61000 4 2 (ESD) 15kV (air), 8kV (contact), IEC 61000 4 5 (lightning) 12A (8/20us), and IEC 61000 4 4 (EFT) 40A (5/50ns)
→ Power Source    12V DC, 60mA
More Information
tp-400fw.jpg
Kramer: tp-400fw
FireWire Over Twisted Pair Transmitter/Receiver & Range Extender

The TP-400FW is a twisted pair transmitter or receiver for FireWire® (IEEE 1394) signals. When used in pairs, one converts a FireWire® signal into a twisted pair signal and the...

→ Ports    1 1394 port on 6-pin serial connectors, front and rear panels; 2 CAT 5 ports on RJ-45 connectors
→ Transfer Rate    100Mbps
→ IEEE-1394 Standards    IEEE 1394a-2000, IEEE 1394-1995, IEEE 1394b-2002 at up to 100Mpbs
→ ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC
→ Power Source    230V AC, 50/60Hz (115V AC, USA) 30VA
More Information
tp-41.jpg
Kramer: tp-41
Component Video & S/PDIF Audio Over Twisted Pair Transmitter

The TP-41 is a twisted pair transmitter for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio...

→ Input    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
→ Outputs    1 RJ-45 CAT 5 shielded connector (Line Out)
→ Max. Output Level    Video: 2.1Vpp
→ Diff. Gain    0.15%
→ Diff. Phase    0.68Deg
More Information
tp410.jpg
Kramer: tp-410
1:10 XGA/A/Data TP Transmitter

The TP−410 is a high−performance distribution amplifier for computer graphics up to WUXGA or twisted pair video, unbalanced stereo or S/PDIF audio, and bi−directional...
More Information
tp-42.jpg
Kramer: tp-42
Component Video & S/PDIF Audio Twisted Pair Receiver

The TP-42 is a twisted pair receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a...

→ Input    1 RJ-45 CAT 5 shielded connector (line in)
→ Outputs    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
→ Max. Output Level    Video: 2.1Vpp
→ Max. Resolution    1080i
→ Diff. Gain    0.15%
More Information
tp-45.jpg
Kramer: tp-45
Component Video Or Computer Graphics Video With Audio Over Twisted Pair Transmitter
The TP45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The...
→ Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
→ Outputs    1 CAT 5 line out on an RJ-45 connector
→ Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
→ Return Loss    -18dB
→ Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
More Information
tp45edid.jpg
Kramer: tp-45edid
XGA/YUV + Audio TP Trans EDID

The TP−45EDID is a high−performance twisted pair transmitter for computer graphics or component video and unbalanced stereo audio signals. It converts the input signals to a...
More Information
tp46n.jpg
Kramer: tp-46n
XGA & YUV & Audio TP Receiver

The TP−46N is a twisted pair receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP−45 transmitter converts...
More Information
tp-50.jpg
Kramer: tp-50
1:2 Computer Graphics Video With S/PDIF Or Stereo Audio Twisted Pair Receiver

The TP-50 is a twisted pair receiver for computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP 50 converts the twisted pair signal...

→ Input    1 CAT 5 on an RJ-45 connector
→ Outputs    2 XGA outputs on 15-pin HD (F) connectors; 1 LINE LOOP on an RJ-45 connector; 2 unbalanced stereo audio outputs on 3.5mm mini jacks; 2 S/PDIF outputs on RCA connectors
→ Max. Output Level    Video: 2Vpp @max gain.; Audio: 4.6Vpp (analog)
→ Max. Resolution    WUXGA
→ Audio Bandwidth    22kHz
More Information
tp-573.jpg
Kramer: tp-573
HDMI, Bi-directional RS-232 & IR Over Twisted Pair Transmitter

The TP-573 is a twisted pair transmitter for HDMI, bi-directional RS-232 and infrared signals. The TP 573 converts the input signals to a twisted pair signal and...

→ Inputs    1 HDMI connector, 1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS-232 port on a 9-pin D-sub connector
→ Outputs    1 CAT 5 OUT on an RJ-45 connector
→ Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard    Supports HDMI and HDCP
→ Power Source    12V DC, 510mA
More Information
tp574.jpg
Kramer: tp-574
HDMI Twisted Pair Receiver

The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair signal and the...
More Information
tp575.jpg
Kramer: tp-575
1:2 HDMI Twisted Pair Receiver & Transceiver

The TP−575 is a DGKat™ twisted pair line driver for HDMI over twisted pair signals. The unit receives a twisted pair signal and outputs both an HDMI and twisted pair signal to...
More Information
tp-576.jpg
Kramer: tp-576
HDMI, Data & IR Over Twisted Pair Transceiver

The TP-576 is a twisted pair (DGKat) line driver for HDMI, bi-directional RS-232 and infrared signals. The TP 576 receives an HDMI signal either from a local HDMI...

→ Inputs    1 HDMI connector; 1 CAT 5 on an RJ-45 connector
→ Outputs    1 CAT 5 on an RJ-45 connector; 1 HDMI connector
→ Ports    1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS 232 port on a 9-pin D-sub connector (for local control)
→ Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard    Supports HDMI and HDCP
More Information
tp580r.jpg
Kramer: tp-580r
HDMI Twisted Pair Receiver

The TP−580R is a high−performance, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580R receives an HDBaseT twisted...
More Information
tp-580rxr.jpg
Kramer: tp-580rxr
HDMI Twisted Pair Receiver

The TP−580RXR is an extended range, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580RXR receives an HDBaseT twisted...
More Information
tp580t.jpg
Kramer: tp-580t
HDMI Twisted Pair Transmitter

The TP−580T is a high−performance, HDBaseT twisted pair transmitter for HDMI, bidirectional RS−232 and IR signals. The TP−580T inputs HDMI, RS−232, and...
More Information
tp580txr.jpg
Kramer: tp-580txr
HDMI Twisted Pair Transmitter

The TP−580TXR is an extended range, HDBaseT twisted pair transmitter for HDMI, bidirectional RS−232 and IR signals. The TP−580TXR inputs HDMI, RS−232, and...
More Information
tp581t.jpg
Kramer: tp-581t
HDMI Twisted Pair Transmitter

The TP−581T is a high−quality HDBaseT twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−581T takes the...
More Information
tp582r.jpg
Kramer: tp-582r
HDMI Twisted Pair Receiver

The TP−582R is a high−quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI inputs, and...
More Information
tp582t.jpg
Kramer: tp-582t
HDMI Twisted Pair Transmitter

The TP−582T is a high−quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two...
More Information
tp-953.jpg
Kramer: tp-953
DVI & Audio Over Twisted Pair Transmitter

The TP-953 is a twisted pair transmitter for DVI video and unbalanced stereo, S/PDIF or TOSLINK® audio signals. The TP 953 converts the input signals to a...

→ Inputs    1 DVI on a 24-pin Molex connector,1 analog audio on a 3.5mm mini jack,1 S/PDIF on an RCA connector,1 optical on a TOSLINK® connector
→ Outputs    2 CAT 5 OUT on RJ-45 connectors
→ Max. Data Rate    Supports up to 1.65Gbps per graphic channel
→ Indicators    IN, OUT, ON LEDs (green)
→ Power Source    12V DC, 460mA
More Information
tp-954.jpg
Kramer: tp-954
DVI & Audio Over Twisted Pair Receiver

The TP-954 is a receiver for DGKat™ twisted pair signals. The TP 954 converts DVI and unbalanced stereo, S/PDIF, or TOSLINK® audio signals to a twisted pair...

→ Inputs    2 CAT 5 IN on RJ-45 connectors
→ Outputs    1 DVI on a 24-pin Molex connector,1 analog audio on a 3.5mm mini jack,1 S/PDIF on a RCA connector,1 optical on a TOSLINK® connector
→ Max. Data Rate    Supports up to 1.65Gbps per graphic channel
→ Controls    EQ. select pushbutton
→ Indicators    IN, OUT, ON LEDs (green)
More Information
tr-1.jpg
Kramer: tr-1
Video Isolation Transformer

The TR1 is a high-resolution isolation transformer for composite video signals. The TR 1 completely isolates devices to eliminate video hum, ground loops, and DC...

→ Input    1 composite video, 1Vpp/75Ω on a BNC connector
→ Output    1 composite video, 1Vpp/75Ω on a BNC connector
→ Insertion Loss    0.8dB
→ Max. Output Level    4 Vpp/75Ω
→ Bandwidth (-3dB)    5.8MHz
More Information
tr-1a.jpg
Kramer: tr-1a
(discontinued) Balanced Mono Audio Isolation Transformer

This item is DISCONTINUED.  For an alternate solution, see Kramer TR-2A.

 

The...

→ Input    1 balanced audio 4dBu/600Ω on a detachable terminal block
→ Output    1 balanced audio 4dBu/600Ω on a detachable terminal block
→ Max. Output Level    26dBu
→ Bandwidth (-3dB)    20Hz to 20kHz
→ S/N Ratio    -83dB @ 4dBu/1kHz
More Information
tr-1yc.jpg
Kramer: tr-1yc
S-Video Isolation Transformers

The TR1-YC is a high-performance isolation transformer for s-Video (Y/C) signals. The TR-1YC provides complete isolation between devices to eliminate hum, ground...

→ Input    1 s-Video on a 4-pin connector
→ Output    1 s-Video on a 4-pin connector
→ Insertion Loss    0.8dB
→ Bandwidth (-3dB)    5.8MHz
→ Diff. Gain    0.12%
More Information
tr-2a.jpg
Kramer: tr-2a
Balanced Stereo Audio Isolation Transformer

The TR-2A is a high-performance isolation transformer for balanced stereo signals. The TR-2A completely isolates devices to eliminate hum, ground loops, and DC...

→ Input    1 balanced stereo audio 4dBu/600Ω on detachable terminal block
→ Output    1 balanced stereo audio 4dBu/600Ω on detachable terminal block
→ Max. Output Level    26dBu
→ Bandwidth (-3dB)    20Hz to 20kHz
→ S/N Ratio    -83dBu @ 4dBu/1000Hz
More Information
tr-3.jpg
Kramer: tr-3
Video & Balanced Stereo Audio Isolation Transformer

The TR-3 is a high-performance isolation transformer for composite video and balanced stereo signals. The TR-3 provides complete isolation between devices to...

→ Inputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
→ Outputs    1 composite video, 1Vpp/75Ω on a BNC connector; 2 balanced stereo audio 4dBu/600Ω on detachable terminal blocks
→ Insertion Loss    0.8dB (video)
→ Max. Output Level    Video: 4VPP/75Ω; Audio: 26dBu
→ Bandwidth (-3dB)    Video: <10Hz to 5.8MHz -3dB; Audio: 20Hz to 20kHz
More Information
va-10.jpg
Kramer: va-10
RGB Cable Delay Corrector

The VA−10 corrects skew (delay) errors in long RGB or twisted pair cable runs. Individual R, G, and B skew adjustments correct video delay errors in analog and twisted pair...
More Information
va-100p.jpg
Kramer: va-100p
10-Outlet 12V Power Supply

The VA−100P is a 10−port 12V DC power supply. It replaces up to ten separate 12−volt adapters for Kramer TOOLS™ and other models that use 12V DC power
More Information
va-100p-5.jpg
Kramer: va-100p-5
10-Outlet 5V Power Supply

The VA−100P−5 is a 10−outlet universal switching power supply. It can supply 5V DC at up to 8A to power up to ten Kramer products that use an external 5V DC power...
More Information
va-130fw.jpg
Kramer: va-130fw
Firewire® 800 Remote Repeater/HUB

The VA130FW is a high-performance bidirectional hub/repeater for 9-pin FireWire® 800 (IEEE 1394b) signals. The VA 130FW increases the number of ports available...

→ Ports    2 FireWire® ports on 9-circuit FireWire® 800 connectors, 1 coax port on a BNC connector
→ Transfer Rate    800Mbps
→ IEEE 1394 Standards    IEEE 1394b-2002, IEEE 1394-1995, IEEE 1394b-2002 up to 800Mpbs
→ ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)
→ Power Source    5V DC, 60mA
More Information
va-14.jpg
Kramer: va-14
4 Channel Balanced Audio Mixer

The VA14 is a high-performance 4-channel mixer for balanced mono audio signals on XLR connectors. The VA 14 inputs four channels of any combination of balanced...

→ Inputs    4 balanced audio, line or mic, on XLR (F) connectors
→ Outputs    2 audio, balanced on XLR (M) connectors; 1 headphone output on a 6.5mm connector
→ Max. Output Level    Line: 20Vpp; Phones: 4.5Vpp; Mic: 300mVpp
→ Bandwidth (-3dB)    >40kHz
→ S/N Ratio    Mic in, phones out: 45.3dB; line in, phones out: 83.3dB; line in, line out: 84.3dB;mic in, line out: 64dB
More Information
va-1dvin.jpg
Kramer: va-1dvin
DVI EDID Emulator

The VA−1DVIN is an EDID emulator for DVI−D signals. The unit can capture an EDID setting in non−volatile memory from the output allowing convenient and reliable connection...
More Information
va-1dvin.jpg
Kramer: va-1dvin
DVI EDID Emulator
The VA1DVIN is an EDID emulator for DVI-D signals. The VA 1DVIN can capture an EDID setting in non-volatile memory from the output allowing convenient and reliable...
→ Input    1 x DVI dual link, DVI 1.0, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
→ Output    1 x DVI, dual Link, DVI 1.0, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
→ Bandwidth    3.3Gbps
→ Controls    Capture EDID button
→ Power Source    5V DC, 20mA
More Information
va-1vgan.jpg
Kramer: va-1vgan
Computer Graphics Video EDID Emulator
The VA1VGAN is an EDID emulator for computer graphics video signals. The VA 1VGAN can capture an EDID setting in non-volatile memory from the output allowing...
→ Input    1 XGA input on a 15-pin HD connector
→ Output    1 XGA output on a 15-pin HD connector
→ Max. Output Level    >2Vpp
→ Bandwidth (-3dB)    1.8GHz
→ Diff. Gain    0.02%
More Information
va-1vgan.jpg
Kramer: va-1vgan
XGA EDID Emulator

The VA−1VGAN is an EDID emulator for computer graphics video signals. The unit can capture an EDID setting in non−volatile memory from the output allowing convenient and...
More Information
va-1vgaxl.jpg
Kramer: va-1vgaxl
Computer Graphics Video EDID Capture/Emulator
The VA1VGAxl is an EDID emulator for computer graphics video signals. The VA 1VGAxl can capture an EDID setting in non-volatile memory from the output or present any...
→ Input    1 VGA (up to WUXGA) on a 15-pin HD connector
→ Output    1 VGA (up to WUXGA) on a 15-pin HD connector
→ Max. Output Level    >2Vpp
→ Bandwidth (-3dB)    1.8GHz
→ Diff. Gain    0.02%
More Information
va-1vgaxl.jpg
Kramer: va-1vgaxl
XGA EDID Emulator

The VA−1VGAxl is an EDID emulator for computer graphics video signals. The unit can capture an EDID setting in non−volatile memory from the output or present any one of 13...
More Information
va-256xl.jpg
Kramer: va-256xl
Audio Delay For Balanced Stereo Audio

The VA256xl is a high-performance audio delay for balanced stereo audio signals. The VA 256xl synchronizes the audio and video signals when they are out of sync....

→ Input    4dBu/30kΩ on a detachable terminal block connector
→ Outputs    4dBu/50Ω on a detachable terminal block connector
→ Max. Input/Output Level    12dBu balanced
→ Bandwidth    20Hz to 20kHz
→ THD Noise    <0.01%, 4dBu 1kHz
More Information
va-2h.jpg
Kramer: va-2h
HDMI EDID Reader

The VA−2H is a diagnostic and debugging tool for installers working with HDMI devices. The unit can switch three different EDIDs to the HDMI input. The installer can manipulate...
More Information
va-4h.jpg
Kramer: va-4h
4−Channel HDMI Controller

The VA−4H is an EDID controller for HDMI signals. The unit inputs up to four HDMI channels and allows the user to select an EDID for each channel from the display, an internal...
More Information
va-50p,jpg
Kramer: va-50p
6-Outlet 12V DC Power Supply

The VA−50P is a 6−port 12V DC power supply. It replaces up to 6 separate 12 volt adapters for Kramer TOOLS™ and other models that use 12V DC power
More Information
va-8xl,jpg
Kramer: va-8xl
8-Channel Balanced Stereo Audio Amplifier

The VA-8xl is a high-performance 8 channel-balanced stereo input volume controller for balanced audio signals on terminal block connectors. The volume of each L & R stereo channel...

→ Input    8 balanced stereo audio 4dBu/30kΩ on detachable terminal blocks
→ Output    8 balanced stereo audio 4dBu/50Ω on detachable terminal blocks
→ Gain    -95dB to 31dB
→ Max. Output Level    >20dBu balanced (THD N <0.01)
→ Bandwidth ( - 3dB)    20Hz to 40kHz
More Information
vm-100cb.jpg
Kramer: vm-100cb
(discontinued) 1:10 Component Video Distribution Amplifier

This product has been discontinued. For an alternative, please contact [email protected]

 

The...

→ Input    1 component video (Y, Pb/Cb, Pr/Cr), looping on BNC connectors
→ Outputs    10 component video (Y, Pb/Cb, Pr/Cr) on BNC connectors
→ Max. Output level    2.2Vpp
→ Bandwidth (-3dB)    450MHz
→ Diff. Gain    0.03%
More Information
vm-1010.jpg
Kramer: vm-1010
1:10 Composite Video Distribution Amplifier
The VM1010 is a high-performance distribution amplifier for composite video. The VM 1010 can also be configured as a 1:5 distribution amplifier for s-Video (Y/C)...
→ Inputs    2 Composite/Component Video, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
→ Outputs    2x5 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
→ Max. Video Output    1.8Vpp
→ Video Bandwidth (-3dB)    235MHz
→ Diff. Gain    0.2%
More Information
vm-1021.jpg
Kramer: vm-1021
1:20 Composite Video Distribution Amplifier

The VM1021 is a high-performance distribution amplifier for composite or SDI video signals. The VM 1021 provides controls to compensate for signal losses inherent...

→ Input    1 Composite Video Or A Single Component, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
→ Outputs    20 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
→ Video Bandwidth(-3dB)    350MHz
→ Diff. Gain    0.1%
→ Diff. Phase    0.07deg
More Information
no-image.jpg
Kramer: vm-1021n
Kramer VM-1021N 1:20 Composite/SDI Video Distribution Amplifier

Kramer VM-1021N 1:20 Composite/SDI Video Distribution Amplifier is a high−performance distribution amplifier for composite or SD−SDI video signals. It provides controls to...
More Information
vm-1055.jpg
Kramer: vm-1055
1:5 RGBHV Video Distribution Amplifier

The VM1055 is a high-performance distribution amplifier for RGBHV video signals. The VM 1055 provides correct buffering and isolation and distributes the signal...

→ Inputs    1x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors, (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
→ Outputs    5x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
→ Max. Video Output    2Vpp
→ Video Bandwidth (-3dB)    300MHz
→ Diff. Gain    0.1%
More Information
vm-10hd.jpg
Kramer: vm-10hd
1:10 HD-SDI Video Distribution Amplifier
The VM10HD is a high-performance distribution amplifier for HD-SDI signals. The VM 10HD takes one input, provides reclocking and equalization and distributes the...
→ Input    1 SMPTE-259M, 292M, 344M serial video, 75Ω on a BNC connector
→ Outputs    11 equalized and reclocked SMPTE-259M, 292M, 344M outputs, 75Ω on BNC connectors
→ Max. Output level    800mVpp/75Ω
→ Maximum Data Rate    1.485Gbps
→ Coupling    AC
More Information
vm-10hdxl.jpg
Kramer: vm-10hdxl
1:10 3G HD-SDI Distribution Amplifier

The VM10HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 10HDxl takes one input, provides reclocking and equalization and...

→ Inputs    1 SMPTE-259M/292M/424M serial video, 75Ω on a BNC connector
→ Outputs    10 equalized and reclocked SMPTE-259M/292M/424M outputs, 75Ω on BNC connectors;1 looped GENLOCK 75Ω/Hi-Z on a BNC connector
→ Max. Output level    800mVpp/75Ω
→ Maximum Data Rate    Up to 2.97Gbps
→ Coupling    AC
More Information
vm-10xl.jpg
Kramer: vm-10xl
1:10 Composite Video & Stereo Audio Distribution Amplifier

The VM10xl is a state of the art, broadcast quality 1:10 distribution amplifier for composite or SDI video signals with unbalanced stereo or balanced mono audio. The VM...

→ Inputs    1 Composite Video, Looping, 1Vpp/75Ω with Termination Switch on BNC Connectors. 2 Balanced Stereo/Mono Audio, Looping, 1Vpp/50kΩ on RCA Connectors
→ Outputs    10 Composite Video, 1Vpp/75Ω on BNC Connectors. 10 Balanced Stereo/Mono Audio, 1Vpp/50Ω on RCA Connectors
→ Max. Output Level    Video: 1.6Vpp; Audio: 26.5Vpp
→ Bandwidth (-3dB)    Video 360MHz; Audio 100kHz
→ Diff. Gain    0.07%
More Information
vm-1110xl.jpg
Kramer: vm-1110xl
1:10 Balanced Mono Audio Distribution Amplifier

The VM1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1110xl can also be configured as a 1: 5...

→ Inputs    2 balanced stereo audio 4dBu/50kΩ on XLR (F) connectors
→ Outputs    10 balanced stereo audio 4dBu/50Ω on XLR (M) connectors
→ Max. Output Level    23.8Vpp
→ Bandwidth (-3dB)    >100kHz
→ S/N Ratio    89.3dB
More Information
vm-1120.jpg
Kramer: vm-1120
1:10 Balanced Stereo Audio Distribution Amplifier

The VM1120 is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1120 can also be configured as a 1:20...

→ Inputs    2 balanced stereo or 4 balanced mono audio 4dBu/50kΩ on XLR (F) connectors
→ Outputs    10 balanced stereo or 20 balanced mono audio 4dBu/50Ω on XLR (M) connectors
→ Max. Output Level    23.8Vpp
→ Bandwidth (-3dB)    >100kHz
→ S/N Ratio    89.3dB
More Information
vm-114h.jpg
Kramer: vm-114h
2x1:4 HDMI TP Switcher & DA

The VM−114H is a switcher/distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals and distributes it to...
More Information