Search

ad2096a.jpg
American Dynamics: as2096a

Alarm Interface Unit (120VAC)

The American Dynamics AD2096A Matrix Alarm Interface Unit is used with American Dynamics Matrix Switching System, which can respond to 64 alarm inputs. 64...

am-1 qam.jpg
TOA: am-1-qam

ARRAY MICROPHONE w/NETWORK DSP CNTRL

The TOA AM-1 QAM is a Steeable array microphone that comes with a network DSP controller

cen-ci3-1.jpg
Crestron: cen-ci3-1

3-Series Card Interface - 1 Slot

The Crestron CEN-CI3-1 is a compact, rack-mountable enclosure designed to provide a versatile control interface and expansion solution using any single 3-Series™ Control...

cnmk.jpg
Crestron: cnmk

Mouse and Keyboard Control Interface

The CNMK is a Cresnet expansion module that provides a PS/2 or USB interface between the Crestron control system and a Windows ® based PC. The CNMK allows mouse...

csc-accn.jpg
Crestron: csc-accn

Cresnet Interface to Somfy ST50 ILT2 Motor

The CSC-ACCN is an interface designed to control one Somfy ® ST50 ILT2 Motor and provides two way communication between the motor and control system over Cresnet ®. In addition...

csc-acex.jpg
Crestron: csc-acex

infiNET EX Interface to Somfy ST50 ILT2 Motor

The CSC-ACEX is an interface designed to control one Somfy ® ST50 ILT2 Motor and provides two way communication between the motor and control system through infiNET EX ®...

csc-dccn.jpg
Crestron: csc-dccn

Cresnet Interface to Crestron CSM-QMT30 Shades

The CSC-DCCN is an interface designed to control one Crestron CSM-QMT30 shade motor and provide two-way communication between the motor and control system over Cresnet ®. The...

csc-dcex.jpg
Crestron: csc-dcex

infiNET EX Interface to Crestron CSM-QMT30 Shades

The CSC-DCEX is an interface designed to control one Crestron CSM-QMT30 shade motor and provide two-way communication between the motor and control system through infiNET EX ®...

dnt0212.jpg
Lectrosonics: dnt0212

DANTE INTERFACE, 2 IN, 12 OUT

The Lectrosonics DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante...

dnt16i.jpg
Lectrosonics: dnt16i

Analog Input Dante Network Processor

The Lectrosonics DNT16i processor provides inputs into a Dante network from analog and digital signals. Each input provides extensive signal processing and routing to any one or...

dnt22.jpg
Lectrosonics: dnt22

Dante 2 In/2 Out Interface

The Lectrosonics DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio...

dntbob88.jpg
Lectrosonics: dntbob88

Dante Network Audio I/O Interface

The Lectrosoncis DNTBOB88 is a high quality, general purpose interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to...

dntwp.jpg
Lectrosonics: dntwp

Dante Audio Interface - Multi I/O Wall Box

The Lectrosonics DNTWP Dante™ Audio Interface is a cost effective multi IO wall box. The unDX2IO features two balanced mic/line XLR inputs and two balanced XLR line outputs....

ka-m790g.jpg
JVC: ka-m790g

Multicore Studio Interface Unit

The JVC KA-M790 Multicore Studio Interface Unit is a compact interface unit that connects to the back of the GY-HM790 shoulder-mount camcorder to provide full studio/EFP...

onyx blackbird.jpg
Mackie: onyx-blackbird

16x16 FireWire Recording Interface

The Onyx Blackbird from Mackie is a 16 x 16 FireWire recording Interface featuring eight boutique-quality Onyx preamps and high-end 24-bit/96kHz conversion in a single space,...

onyx blackjack.jpg
Mackie: onyx-blackjack

2x2 USB Recording Interface

The Onyx Blackjack from Mackie is a 2 x 2 USB recording Interface featuring two boutique-quality Onyx preamps and high-end 24-bit/48kHz conversion in a convenient tabletop...

spn32i.jpg
Lectrosonics: spn32i

DIGITAL MATRIX AUDIO PROCESSOR, 32 IN, ASPEN NET

The Lectrosoincs SPN32I Add inputs to your ASPEN system easily with the 16i and 32i input-only units. High-resolution, low-noise microphone preamplifiers featuring true 48 V...

spncwb.jpg
Lectrosonics: spncwb

Wideband Bridging Conference Interface

The SPNCWB from Lectrosonics is a wideband conference interface that makes tele-presence and multi-site bridging simple and effective in any conference room, with full bandwidth...

tpmc-ch-imc.jpg
Crestron: tpmc-ch-imc

CAT5 Balanced AV Interface Module

The TPMC-CH-IMC is an audio/video interface module that is included as standard with many Isys touchpanels that utilize Crestron Home (CH) CAT5 AV connectivity*. The interface...

tpmc-ch-imw.jpg
Crestron: tpmc-ch-imw

CAT5 Balanced AV Interface Wall Plate

The TPMC-CH-IMW is a wall plate version of the TPMC-CH-IMC interface module, providing a wall plate connection for new Isys ® TPS and TPMC-CH series touchpanels that utilize...

tps-6x-imcw.jpg
Crestron: tps-6x-imcw

Interface Module for TPS-6, TPS-6X-DS, and TPMC-9

The TPS-6X-IMCW is the interface module that is included with the Isys™ TPS-6 and TPMC-9 Tilt Touchpanels, TPS-6X Wireless Touchpanel, and TPS-6X-DS Docking Station. It...

tps-ga-tpi.jpg
Crestron: tps-ga-tpi

Isys G-Series Touchpanel Interface *DISCONTINUED*

Please note, this item has been discontinued. Please inquire for recommended alternate options.

 

The TPS-GA-TPI is designed to allow for the integration...

tps-impc.jpg
Crestron: tps-impc

Isys Interface Module

The TPS-IMPC is an interface module that is included as standard with every Isys TPS-3000 and TPS-4000 tilt touchpanel. Additional interface modules may be purchased and installed...

tps-imw.jpg
Crestron: tps-imw

Isys Interface Module Wall Plate

The TPS-IMW is a wall plate version of the TPS-IMPC interface module, providing a flush wall plate connection for any Isys TPS-3000 or TPS-4000 tilt touchpanel. The...



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.