Search

csdhdrc.jpg
Orion: csdhdrc

HD-SDI Receiver (SDI to HDMI ), SMPTE Type, BNC In, HDMI Out

The ORION HD-SDI CSDHDRC receiver is a converter which converts SDI (SMPTE) to HDMI and outputs to TV or monitor. The ORION Images CSDHDRC HD-SDI receiver support 1920 x 1080p,...

ltc-4642-00.jpg
Bosch: ltc-4642-00

850NM FOM, RECEIVER, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK

The Bosch LTC 4642/00 850NM FOM, RECEIVER, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant Series of...

ltc-4651-00.jpg
Bosch: ltc-4651-00

850NM FOM, TRANSMITTER/RECEIVER, BIPHASE OR RS-232 DATA

The Bosch LTC 4651/00 850NM FOM, TRANSMITTER/RECEIVER, BIPHASE OR RS-232 DATA, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant...

ltc-4671-00.jpg
Bosch: ltc-4671-00

850NM FOM, TRANSMITTER/RECEIVER, RS-485 DATA, USE WITH LTC 4637 SERIES RACK

The Bosch LTC 4671/00 850NM FOM, TRANSMITTER/RECEIVER, RS-485 DATA, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant Series of...

ltc-4745-00.jpg
Bosch: ltc-4745-00

1310NM FOM, RECEIVER, 4 CHANNEL, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK

The Bosch LTC 4745/00 1310NM FOM, RECEIVER, 4 CHANNEL, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK with Surface-mount or rack-mount units and Data communication link supports...

ltc-8561-60.jpg
Bosch: ltc-8561-60

RECEIVER/DRIVER, 120VAC PAN/TILT VOLTAGE, 120VAC SUPPLY, WITH AUXILIARIES, 60HZ

The Bosch LTC 8561/60 RECEIVER/DRIVER, 120VAC PAN/TILT VOLTAGE, 120VAC SUPPLY, WITH AUXILIARIES, 60HZ with Pre-positions compatible with 360 ° continuous pan/tilt drives and...

1201urx-si.jpg
Azden: 1201urx-si

On-Camera Receiver
Whether you use a Panasonic® or Ikegami® camera with "slot-in" receiver capabilities, or use the Anton-Bauer® Gold Mount®, or a V-Mount battery, there's an Azden 1201-URX/SI...
RF Carrier Frequency Range    188 steps ~ 638.125 - 661.875 MHz
Noise Reduction    Expander (THAT)
Effective Operating Range    200 - 300 ft ~ 60 - 100m
Frequency Response    50 - 15kHz (± 1.5dB)
RF Sensitivity    (12dB SINAD) 1.2μV
1201urx-vm.jpg
Azden: 1201urx-vm

On-Camera Receiver
Whether you use a Panasonic® or Ikegami® camera with "slot-in" receiver capabilities, or use the Anton-Bauer® Gold Mount®, or a V-Mount battery, there's an Azden 1201-URX/VM...
RF Carrier Frequency Range    188 steps ~ 638.125 - 661.875 MHz
Noise Reduction    Expander (THAT)
Effective Operating Range    200 - 300 ft ~ 60 - 100m
Frequency Response    50 - 15kHz (± 1.5dB)
RF Sensitivity    (12dB SINAD) 1.2μV
1201urx-ab.jpg
Azden: 1201urx-ab

On-Camera Receiver

The Azden 1201URX/AB Slot-In Portable Wireless Microphone Receiver comes equipped with an Anton Bauer ® Gold-Mount ® adapter for direct mounting on your camera's...

RF Carrier Frequency Range    188 steps ~ 638.125 - 661.875 MHz
Noise Reduction    Expander (THAT)
Effective Operating Range    200 - 300 ft ~ 60 - 100m
Frequency Response    50 - 15kHz (± 1.5dB)
RF Sensitivity    (12dB SINAD) 1.2μV
1t-ct-442.jpg
TV One: 1t-ct-442

Receiver: RGBHV. Up to 150M (500') - Compatible with C2-1200/1250

The 1T-CT-442 CAT.5 Receiver from TV One is a device in a modular system designed for transmitting varied media over extended distances using CAT 5/5E/6 Ethernet cable. This unit...

1t-ct-570.jpg
TV One: 1t-ct-570

DVI-D over Fiber Optic Cable Transmitter-Receiver Set. Max Res 1080p, 1920x1200

The Tv One 1T-CT-570 Series DVI Fiber Optic Extender is a high performance system used to transmit PC and HDTV video at resolutions up to WUXGA and 1080p respectively over...

1t-ct-642.jpg
TV One: 1t-ct-642

Receiver: HDMI ver1.4 and IR over Single Cat.5e/6

The TV One 1T-CT-642 HDMI Receiver forms the HDMI over single CAT5e/CAT6 system when coupled with the 1T-CT-641 Transmitter (sold separately). It supports the...

1t-ct-652.jpg
TV One: 1t-ct-652

Receiver: HDMI ver1.4a over Single Cat.5e/6. Uses HDBaseT 3Play technology

The Tv One 1T-CT-651/1T-CT-652 HDMI over Single Cat.5e/Cat.6 form a product group which employs HDMI v1.4a capability and the HDBaseT 3Play™ technology to allow transmission...

1t-ct-654a.jpg
TV One: 1t-ct-654a

Receiver: HDMI ver1.4a over Single Cat.5e/6. Uses HDBaseT 5Play technology

The Tv One 1T-CT-653/1T-CT-654A HDMI over Single Cat.5e/Cat.6 system consists of a 1T-CT-653 Transmitter coupled with a 1T-CT-654A Receiver (each purchased...

2000urx.jpg
Azden: 2000urx

2000 Series UHF Receiver

The Azden 2000URX is a Broadcast Spec True Diversity Receiver with a digital display in a portable/table top diecast metal case. It operates on 4 “AA” batteries and is...

Receiver Type    True Space Diversity, Double Super Heterodyne
Sensitivity    0.8uV
Reference Deviation    /- 5 kHz
Noise Reduction    Proprietary Compander
Signal to Noise Ratio    >100dB
2000urx-si.jpg
Azden: 2000urx-si

UHF Slot-In Receiver for Panasonic Cameras
Improving the performance of the highly regarded 1201 series was no easy task for Azden engineers. This involved a completely new circuit design, for the crystal-controlled PLL synthesized 2000...
Receiver Type    True Space Diversity, Double Super Heterodyne
Sensitivity    0.8uV
Reference Deviation    /- 5 kHz
Noise Reduction    Proprietary Compander
Signal to Noise Ratio    >100dB
2000urx-sis.jpg
Azden: 2000urx-sis

UHF Slot-In Receiver for Sony Cameras
Improving the performance of the highly regarded 1201 series was no easy task for Azden engineers. This involved a completely new circuit design, for the crystal-controlled PLL synthesized 2000...
Receiver Type    True Space Diversity, Double Super Heterodyne
Sensitivity    0.8uV
Reference Deviation    /- 5 kHz
Noise Reduction    Proprietary Compander
Signal to Noise Ratio    >100dB
400-iob08-080.jpg
Geovision: 400-iob-08-080

GV-IO Box 8 Port V1.20

Geovision 400-IOB08-080 GV-IO Box 8 provides 8 inputs and 8 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

400-iob04-040.jpg
Geovision: 400-iob-04-040

GV-IO Box 4 Port

Geovision  400-IOB04-040 GV-IO Box 4 provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

400-iob08-08e.jpg
Geovision: 400-iob-08-08-e

GV-IO Box 8 Port (with Ethernet) V1.2

Geovision 400-IOB08-08E GV-IO Box 8 provides 8 inputs and 8 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

400-iob16-160.jpg
Geovision: 400-iob-16-160

GV-IO Box 16 Port V1.20

Geovision  400-IOB16-160 GV-IO Box 16 provides 16 inputs and 16 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC

611r.jpg
Kramer: 611r

Composite Video Optical Receiver

The 611T and 611-R are a high-performance fiber optic transmitter and receiver for composite video signals. The 611T transmitter converts a composite video signal into a fiber...

Input    Fiber optic ST connector
Output    Composite Video 1Vpp/75Ω on a BNC connector
Operation Distance    Up to 5km (MultiMode)
Video Bandwidth (-3dB)    55 MHz. 20 MHz
Diff. Gain    0.4%
614r-t.jpg
Kramer: 614r-t

DVI Optical Trans & Receiver

The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at...

616r-t.jpg
Kramer: 616r-t

DVI Optical Trans & Receiver

The 616T and 616R are a small and lightweight, detachable fiber optic transmitter and receiver pair. They transmit uncompressed resolutions of up to WQXGA...

621r.jpg
Kramer: 621r

DVI Optical Receiver

The 621R is an optical receiver for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the optical...

Input    4 LC optical connectors for R, G, B & clock. 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Output    DVI-D on a DVI-I connector
Bandwidth    1.65Gbps
Power Source    12V DC, 1.25A
Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
622r.jpg
Kramer: 622r

Dual Link DVI Optical Receiver

The 622T and 622R are an optical transmitter and receiver pair for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an optical...

Input    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue, & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Output    DVI-D on a DVI-I connector
Bandwidth    3.3Gbps
Power Source    12V DC, 200mA
Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
650r.jpg
Kramer: 650r

DVI Over Coax Receiver

The 650R is a high-performance receiver for DVI, RS-232, and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them back...

Inputs    5 BNC connectors
Outputs    1 DVI connector
Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Power Source    12V DC, 330mA
670r.jpg
Kramer: 670r

HDMI Over Fiber Optic Receiver

The 670R is a high-performance fiber optic receiver for HDMI signals. The 670R receives an optical signal from the 670T and converts the light pulses back to an...

Inputs    1 optical connector
Outputs    HDMI connector
Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
Extension Limit    1700m (>5570 feet) for 1080p/60Hz
671r.jpg
Kramer: 671r

DVI Over Fiber Optic Receiver

The 671T and 671R are a high-performance fiber optic transmitter/receiver duo for DVI signals. The unit converts a DVI signal to light pulses that are transmitted over one single...

Inputs    1 optical connector
Outputs    DVI connector
Data Rate    Up to 1.65Gbps
Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
690r.jpg
Kramer: 690r

3G HD−SDI Fiber Receiver

The 690R is a high−performance fiber optic receiver for SDI video signals up to 3G HD−SDI. The 690T converts two 3G HD−SDI signals to single−mode fiber optic...

706xl.jpg
Kramer: 706xl

Composite Video Over Twisted Pair Branching Receiver

The 705xl and 706-xl are a twisted pair transmitter and receiver for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the...

Input    1 twisted pair input on terminal block connectors; 1 loop on terminal block connectors
Output    2 composite video 1Vpp/75Ω on BNC connectors
Bandwidth (-3dB)    108MHz (-3dB)
Diff. Gain (PAIR)    0.08%
Diff. Phase (PAIR)    0.07Deg
712n.jpg
Kramer: 712n

Composite Video & Stereo Audio Over Twisted Pair Receiver

The 712-N is a twisted pair receiver for composite video and unbalanced stereo audio signals. The 711N transmitter converts composite video and stereo audio to a twisted pair...

Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
Output    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
Video Max. Signal Level    2.8Vpp
Audio Max. Signal Level    7.6Vpp
Video Bandwidth (-3dB)    85MHz
cnxrmird.jpg
Crestron: cnxrmird


The CNXRMIRD is an optional infrared (IR) receiver designed for use with a control system or room solution box that includes an IR input port. The CNXRMIRD...

dm-rmc-100.jpg
Crestron: dm-rmc-100

DigitalMedia CAT Receiver & Room Controller 100

The DM-RMC-100 provides a convenient one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM ®...

dm-rmc-100-1.jpg
Crestron: dm-rmc-100-1

DigitalMedia CAT Receiver & Room Controller 100-1

The DM-RMC-100-1 provides a convenient one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM ®...

dm-rmc-100-c.jpg
Crestron: dm-rmc-100-c

DigitalMedia 8G+ Receiver & Room Controller 100

The DM-RMC-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM...

dm-rmc-100-s.jpg
Crestron: dm-rmc-100-s

DigitalMedia 8G Fiber Receiver & Room Controller 100

The DM-RMC-100-S provides a simple one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM 8G ®...

dm-rmc-150-s.jpg
Crestron: dm-rmc-150-s

DigitalMedia 8G Fiber Receiver & Room Controller 150

The DM-RMC-150-S provides an enhanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM 8G...

dm-rmc-200-c.jpg
Crestron: dm-rmc-200-c

DigitalMedia 8G+ Receiver & Room Controller 200

The DM-RMC-200-C provides an advanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM...

dm-rmc-200-s.jpg
Crestron: dm-rmc-200-s

DigitalMedia 8G Fiber Receiver & Room Controller 200

The DM-RMC-200-S provides an advanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM 8G...

dm-rmc-200-s2.jpg
Crestron: dm-rmc-200-s2

DigitalMedia 8G Single-Mode Fiber Receiver & Room Controller 200

The DM-RMC-200-S2 provides an advanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM 8G...

dm-rmc-4k-100-c.jpg
Crestron: dm-rmc-4k-100-c

4K DigitalMedia 8G+ Receiver & Room Controller 100

The DM-RMC-4K-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM...

dm-rmc-scaler-c.jpg
Crestron: dm-rmc-scaler-c

DigitalMedia 8G+ Receiver & Room Controller w/Scaler

The DM-RMC-SCALER-C provides an advanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM...

dm-rmc-scaler-s.jpg
Crestron: dm-rmc-scaler-s

DigitalMedia 8G Fiber Receiver & Room Controller w/Scaler

The DM-RMC-SCALER-S provides an advanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM...

dm-rmc-scaler-s2.jpg
Crestron: dm-rmc-scaler-s2

DigitalMedia 8G Single-Mode Fiber Receiver & Room Controller w/Scaler

The DM-RMC-SCALER-S2 provides an advanced one-box interface solution for a single display device as part of a complete Crestron ® DigitalMedia™ system. It functions as a DM...

dm-rx1-1g.jpg
Crestron: dm-rx1-1g

Wall Plate DigitalMedia CAT Receiver black textured

The DM-RX1-1G is a DM ® CAT receiver that installs in a single-gang electrical box to provide a convenient interface for a single display device as part of a complete Crestron ®...

dvi-1fo-r.jpg
TV One: dvi-1fo-r

DVI Receiver over Fiber for Modular Matrix

The Tv One DVI-1FO-R DVI Receiver over 1FO Receives the Fiber Optic signal and converts to DVI. Extend DVI up to 6600 feet (2000 meters) using 50μ OM3e/OM4...

dvi-elrpol-r.jpg
TV One: dvi-elrpol-r

DVI Receiver over CAT-5 for Modular Matrix

The Tv One DVI-ELRPOL-R DVI ELR Receiver with POL  Extends DVI up to 330 feet (100 meters) and uses POL (Power Over Line) technology to supply power to the...

dvirs232-1fo-r.jpg
TV One: dvirs232-1fo-r

DVI and RS-232 Receiver over Fiber for Modular Matrix

The Tv One DVIRS232-1FO-R DVI-RS232 Receiver over 1FO Receives the Fiber Optic signal and converts to DVI. Extend DVI up to 6600 feet (2000 meters) using 50μ...

dvirs232-elrpol-r.jpg
TV One: dvirs232-elrpol-r

DVI and RS-232 Receiver over CAT-5 for Modular Matrix

The Tv One DVIRS232-ELRPOL-R DVI-RS232 ELR Receiver with POL Extends DVI up to 330 feet (100 meters) and uses POL (Power Over Line) technology to supply power to...

ek100g3.jpg
Sennheiser: ek-100-g3

Wireless Receiver - Wireless Microphone
Portable components always work easiest when you do not have to think about them. This was the basis on which the Sennheiser EK-100-G3was developed. Its adaptive-diversity technology...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680
Presets    12
Switching bandwidth    42 MHz
Signal-to-noise-ratio    > 110 dB(A)
ek2000.jpg
Sennheiser: ek-2000

Audio Receiver - Wireless Receiver
It is nice when you can concentrate fully on the picture because you know the sound is reliable. This Sennheiser EK-2000 camera receiver allows you to do just that. Equipped with...
Modulation    FM
RF frequency range    516 - 865 MHz
Carrier frequency max    3,000
Presets    max. 64
Switching bandwidth    max. 75 MHz
ek2020dus.jpg
Sennheiser: ek-2020-d-us

Bodypack Receiver
The Sennheiser EK 2020 D US is a six channel digital RF bodypack receiver. The EK2020DUS offers automatic on/off, easy volume and channel selection. Includes an...
Modulation    2 FSK
RF frequency range    926 - 928 MHz
Number of channels    6
Total harmonic distortion (THD)    <1% at 10 mW
Headphone connector    max. 10 mW/32Ω
ek300iemg3.jpg
Sennheiser: ek-300-iem-g3

Small Wireless Receiver - Audio Receiver
The most-trusted wireless monitoring system gets even better. With upgraded features, this Sennheiser EK 300 IEM G3 bodypack receiver sets the standard by which all other monitoring...
Modulation    FM, MPX-Stereo
RF frequency range    516 - 865 MHz
Carrier frequency    1680
Presets    max. 16
Switching bandwidth    42 MHz
eki1029pll16.jpg
Sennheiser: eki-1029-pll16

Conference Systems, Equipment, Receiver Multi-channel
The Sennheiser EKI-1029-PLL-16 is a slim multi-channel receiver for narrow-band applications. It is powered by an environmentally friendly accupack and can be used with headphones,...
Carrier frequency    55 - 1,335 kHz
Connector (headphones)    3.5 mm mono
Impedance    25 Ω
Modulation    FM
Operating time    30 h.
eki1029pll32.jpg
Sennheiser: eki-1029-pll32

Conference, Meeting, Technology, Wireless Reciever
The Sennheiser EKI-1029-PLL-32 is a slim multi-channel receiver for narrow-band applications. It is powered by an environmentally friendly accupack and can be used with headphones,...
Carrier frequency    55 - 1,335 kHz
Connector (headphones)    3.5 mm mono
Impedance    25 Ω
Modulation    FM
Operating time    30 h.
el1500c.jpg
Nitek: el1500c

TCP/IP Transmission Over Coax W/POE - Up To 1,640 Feet (Transmitter & Receiver)

The Nitek IP & PoE Over Coax Extender EL1500C IP video over Coax network extender-PoE Inserter (EtherStretch) system includes both the transmitter and receiver units. The System...

Unit    Transceiver
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
el1500u.jpg
Nitek: el1500u

TCP/IP Transmission Over UTP W/POE - Up To 1,960 Feet (Transmitter & Receiver)

The Nitek Ethernet & PoE Extender EL1500U IP ethernet network extender-PoE Inserter (EtherStretch) can quickly turn any ordinary 4 pair category network cable into a high speed...

Unit    Transceiver
Size    1.1"H x 1.6"W x 3.6"D
el4500c.jpg
Nitek: el4500c

IP Cameras Over Coax Extender

The EL4500C is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable...

em100g3.jpg
Sennheiser: em-100-g3

Wireless Microphones Receiver System
With its improved design and new features, this rugged Sennheiser EM-100-G3 rack receiver is ready for the road with its proven transmission reliability and inspiring flexibility....
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680
Presets    12
Switching bandwidth    42 MHz
Peak deviation    ±48 kHz
em2000.jpg
Sennheiser: em-2000

Professional Microphones Receiver
Hiding underneath the sturdy 19-inch metal housing of the stationary receiver is highly advanced professional transmission technology. As with all components of the 2000 series, with the Sennheiser...
RF frequency range    516 - 865 MHz
Carrier frequency    max. 3,000
Presets    max. 64
Switching bandwidth    max. 75 MHz
Peak deviation    ± 48 kHz
em2050.jpg
Sennheiser: em-2050

Twin Wireless Receiver
Equipped with the same features as EM 2000 but designed as a twin receiver, the Sennheiser EM2050 makes it possible for the RF signal to be looped through with the help of an...
RF frequency range    516 - 865 MHz
Carrier Frequency    max. 3,000
Presets    max. 64
Switching bandwidth    max. 75 MHz
Peak deviation    ±48 kHz
em300g3.jpg
Sennheiser: em-300-g3

Head Worn Microphones - Wireless Receiver Systems
The Sennheiser EM 300 G3 understands that the more self-reliant a device is, the more artistic freedom there is to enjoy. With this in mind, this new EM 300 G3...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680
Presets    max. 24
Switching bandwidth    42 MHz
Peak deviation    ±48 kHz
em500g3.jpg
Sennheiser: em-500-g3

True Diversity Receiver, 32 Presets Per Frequency Bank
In every respect, this Sennheiser EM-500-G3 professional receiver from the new Sennheiser G3 line provides the most features and performance the evolution series has to offer. It...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680
Presets    max. 32
Switching bandwidth    42 MHz
Peak deviation    ±48 kHz
er16500c.jpg
Nitek: er16500c

16 Port IP Extender W/Gigabit PoE Switch Up To 500 Meters (1,640 Ft.)

The Nitek Ethernet over Coax 16 Port IP Extender w/Gigabit PoE Switch ER16500C IP video over Coax multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit...

Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [16] Coaxial BNC Connector
er8500c.jpg
Nitek: er16500u

16 Port IP Extender W/Gigabit PoE Switch Up To 600 Meters (1,960 Ft.)
The Nitek 16 Port IP Extender w/Gigabit PoE Switch ER 16500U IP video multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with from 1 to...
Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [16] RJ45 Ports
er1651u.jpg
Nitek: er1651u

IP Video 2 Wire Network Extender: 16 Port Receiver Unit

The Nitek ER1651U is another component of the NITEK cutting edge Etherstretch™ line. The ER1651U Receiver cambined with an ET1551U Transmitter (sold...

Network Output Port    (1) RJ45 Connector, 1 Gigabit
Link Port    16 Twisted Pair Wires
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 Full Duplex
LED Connectivity Indicators    Link Status, PoE Out, 10Mb or 1000Mb
Power Requirements    IEC380 Connector -115-240VAC/50-60Hz/150Watt Max
er8400c.jpg
Nitek: er8400c

Ethernet Over Coax (EOC) 8 Port Extender w/Gigabit PoE Switch

The Etherstretch™ ER8400C Ethernet over Coax multi-port network extender-Gigabit PoE Switch is a Wall Mount Receiver unit that operates with from 1 to 8 ET1500C Transmitter...

er8500c.jpg
Nitek: er8500c

8 Port IP Extender W/Gigabit PoE Switch

The Nitek 8 Port IP Extender w/Gigabit PoE Switch ER8500C IP video over Coax multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with...

Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [8] Coaxial BNC Connector
er8500c.jpg
Nitek: er8500u

8 Port IP Extender W/Gigabit PoE Switch Up To 600 Meters (1,960 Ft.)
The Nitek 8 Port IP Extender w/Gigabit PoE Switch ER 8500U is a IP video multi-port network extender-Gigabit PoE Switch (EtherStretch) is a Receiver unit that operates with from 1...
Unit    Transceiver
Size    1 RU x 12.7"D
Power Requirements    IEC380 power connector - 100-240 VAC input
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [8] RJ45 Ports
frs311000r00.jpg
Nitek: frs311000r00

Single Channel Rack Mount Video Only Receiver

Nitek's FRS311000R00 is a single fiber channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode or...

frs311000s00.jpg
Nitek: frs311000s00

Single Channel Stand Alone Video Only Receiver

Nitek's FRS311000S00 is a single fiber per channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode...

frs312104r00.jpg
Nitek: frs312104r00

Single Channel Rack Mount Video & Data Receiver

Niteks FRS312104R00 is a single fiber per channel Universal-Mode™ video and data receiver. Niteks unique Universal-Mode™ optics allow the same unit to be used with...

frs312104s00.jpg
Nitek: frs312104s00

Single Channel Stand Alone Video & Data Receiver

Nitek's FRS312104S00 is a single fiber channel Universal-Mode™ video and data receiver in which both video and data are received over the same fiber. Nitek's unique...

frs322000r00.jpg
Nitek: frs322000r00

Dual Channel Rack Mount Video Only Receiver

Nitek's FRS322000R00 is a two channel video only Universal-Mode™ receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow...

frs322000s00.jpg
Nitek: frs322000s00

2 Channel Stand Alone Video Only Fiber Optic Receiver 1550nm

Niteks FRS322000S00 is a two channel video only Universal-Mode receiver, that requires a single fiber per channel. Niteks unique Universal-Mode optics allow the unit to be used...

frs324104r00.jpg
Nitek: frs324104r00

Dual Channel Rack Mount Video & Data Receiver

Nitek's FRS324104R00 is a two channel video and data, Universal-Mode™ receiver. The system requires a single fiber per channel. Both video and data are transmitted over the...

frs324104s00.jpg
Nitek: frs324104s00

Dual Channel Stand Alone Video & Fiber Optic Data Receiver

Nitek's FRS324104S00 is a two channel video and data, Universal-Mode™ receiver. The system requires a single fiber per channel. Both video and data are transmitted over the...

frs344000r00.jpg
Nitek: frs344000r00

Four Channel Rack Mount Video Only Receiver

Nitek's FRS344000R00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode optics allow the unit to...

frs344000s00.jpg
Nitek: frs344000s00

Four Channel Stand Alone Video Only Receiver

Nitek's FRS344000S00 is a four channel video only Universal-ModeT receiver. The system requires a single fiber per channel. Nitek's unique Universal-Mode™ optics allow the...

frs541000r00.jpg
Nitek: frs541000r00

Four Channel Rack Mount Video Only Receiver

Nitek's FRS541000R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs541000s00.jpg
Nitek: frs541000s00

Four Channel Stand Alone Video Only Receiver

Nitek's FRS541000S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs541100r00.jpg
Nitek: frs541100r00

Four Channel Rack Mount Video & Data Receiver

Nitek's FRS541100R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs541100s00.jpg
Nitek: frs541100s00

Four Channel Rack Mount Video & Data Receiver

Nitek's FRS541100S00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs541110r00.jpg
Nitek: frs541110r00

Four Channel Rack Mount Video, Data & Ethernet Receiver

Nitek's FRS541110R00 is a four channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs541110s00.jpg
Nitek: frs541110s00

4 Channel Video, Data & Ethernet Receiver W/ Bi-directional RS422/485/232

Nitek's FRS541110S00 is a four channel Universal-Mode™ video receiver that allows the same unit to be used with 1 single-mode or multi-mode fiber optic cabling type.

frs581000r00.jpg
Nitek: frs581000r00

Eight Channel Rack Mount Video Only Receiver

Nitek's FRS581000R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs581000s00.jpg
Nitek: frs581000s00

Eight Channel Stand Alone Video Only Receiver

Nitek's FRS581000S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs581100r00.jpg
Nitek: frs581100r00

Eight Channel Rack Mount Video & Data Receiver

Nitek's FRS581100R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs581100s00.jpg
Nitek: frs581100s00

Eight Channel Stand Alone Video & Data Receiver

Nitek's FRS581100S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs581110r00.jpg
Nitek: frs581110r00

Eight Channel Rack Mount Video, Data & Ethernet Receiver

Nitek's FRS581110R00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

frs581110s00.jpg
Nitek: frs581110s00

Eight Channel Stand Alone Video, Data & Ethernet Receiver

Nitek's FRS581110S00 is an eight channel Universal-Mode™ video receiver. Nitek's unique Universal-Mode™ optics allow the same unit to be used with 1 single-mode or...

hde2020dus.jpg
Sennheiser: hde-2020-d-ii-us

Stethoset Receiver
The Sennheiser HDE 2020 D II US is a six channel digital RF stethoset receiver. The HDE-2020-D-II-US offers automatic on/off, easy volume and channel selection....
Master carton quantity    10
Dimensions    9.6 x 4.9 x 0.8 in. (245 x 125 x 20 mm)
Frequency response (headphones)    100 - 7,000 Hz
Modulation    2 FSK
Number of channels    6
hdi1029pll16.jpg
Sennheiser: hdi-1029-pll16

Meeting, Congress, Symposium, Conference Systems Equipment
The Sennheiser HDI-1029-PLL16 is a very lightweight, user-friendly infrared stethoset receiver for use with the SI 29-5 system or the discontinued SI 1029. The...
Modulation    FM
Carrier frequency    55 - 695 kHz
Operating time    10 hours
Power Supply    BA 90, 2.5 V, 170 mAh
Weight incl. Accupack    2.1 oz. (60 g)
hdi830.jpg
Sennheiser: hdi-830

Infrared Conference Equipment Stethophone Infrared Receiver
The Sennheiser HDI-830 is a professional two-channel stethoset receiver for wideband transmission systems (with carrier frequencies of 2.3 MHz and 2.8 MHz) in museums, theaters and...
Modulation    FM, stereo
Receiving frequency    2.3 / 2.8 MHz
Frequency response (headphones)    50 - 16,000 Hz
Max. sound pressure level (active)    125 dB (1 kHz)
Total harmonic distortion (THD)    <1%
ifbr1a.jpg
Lectrosonics: ifbr1a

BELT PACK RECEIVER W/ POUCH; NEW STYLE

The Lectrosonics IFB-R1a is a frequency-agile UHF wireless IFB beltpack monitoring receiver, housed in a durable slim-profile case, and capable of accessing 256 frequencies...

ir-500r.jpg
TOA: it-500r

IR Wireless Wall Mount Receiver

The TOA IR-500R IR Wireless Wall Mount Receiver is intended for use with the TOA Infrared Wireless Microphone system. The IR-500R receives IR signal from the TOA...

irr-30.jpg
Azden: irr-30

Dual Channel Infrared Receiver

The Azden IRR-30 Dual Channel Infrared Receiver is intended for use with any of the Azden IR transmitters. The IRR-30 allows two IR transmitters to be used...

irr-40p.jpg
Azden: irr-40p

2-Channel Infrared Receiver with Amplifier

The Azden IRR-40P 2-Channel Infrared Receiver is designed for use with Azden IR (Infrared) wireless transmitters (sold separately). The IRR-40P features a built-in amplifier with...

irr-50p.jpg
Azden: irr-50p

3-Channel Ceiling Mounted IR Receiver

The Azden IRR-50P is a three-channel, ceiling-mounted IR receiver with remote transmitter volume control, built in power amp and

kds-en2r.jpg
Kramer: kds-en2r

HDMI over IP Receiver

The KDS−EN2R is an IP−based receiver for HDMI signals. Using JPEG2000 compression technology, the KDS−EN2R receives a visually lossless HD image...

kw11.jpg
Kramer: kw-11

Wireless HDMI Trans/Receiver

The KW−11T and KW−11R is a high−definition, wireless, HDMI transmitter and receiver combination for indoor use over short range distances. The...

lectrosonics d4r.jpg
Lectrosonics: lectrosonics-d4r

DIGITAL 4CH RECEIVER, ANALOG OR DIGITAL OUT, W/PSU

The LECTROSONICS D4R from Lectrosonics is a 4-channel wireless receiver that operates on the DTV-free frequencies of 902-928 MHz. When used with a Lectrosonics...

lectrosonics dr.jpg
Lectrosonics: lectrosonics-dr

Digital Encrypted Wireless System DR - Encrypted Receiver

A completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and Digital Hybrid Wireless ® systems, with remarkable audio...

lectrosonics drm.jpg
Lectrosonics: lectrosonics-drm

DIGITAL ENCRYPTED RCVR MODULE, 25.5 MHz TUNING RANGE

The  LECTROSONICS DRM completely new digital architecture was developed for the DSW wireless system. Extended operating range rivals the best analog and Digital Hybrid Wireless...

lectrosonics vrt.jpg
Lectrosonics: lectrosonics-vrt

Venue System Tracking Receiver Module for the VRM Receiver Master

As part of the Lectrosonics Venue System, the LECTROSONICS VRT Tracking Receiver Module installs into the Venue Receiver Master (VRM) unit and provides 256 UHF selectable...

nv-452r.jpg
NVT: nv-452r

4-Channel Video Active Receiver

The NVT 4-Channel Video Active Receiver NV-452R is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km) using...

Video Frequency response    DC to 10 MHz
Video Equalization    0.5 dB typ
Video Automatic    (no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection    15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC    75 ohms
nv-652r.jpg
NVT: nv-652r

Active Video Receiver

The NVT Video Active Receiver NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km)...

Video Frequency response    DC to 10 MHz
Video Equalization    0.5 dB typ
Video Automatic    (no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection    15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC    75 ohms
nv-er1804.jpg
NVT: nv-er1804

TBus Four Port Receiver

The NVT Model NV-ER1804 TBus Ethernet over Coax/UTP Receiver is a compact bus-architected receiver hub that has four TBus ports, each capable of supporting multiple TBus...

nv-er1816i.jpg
NVT: nv-er1816i

TBus Sixteen Port Receiver Hub

The NVT Model NV-ER1816i TBus Ethernet over Coax/UTP Receiver Hub is a 1U 19” rack mountable bus-architected media switch that has 16 TBus ports, capable of supporting up to...

nvr-er1808i.jpg
NVT: nv-er1808i

TBus 8-Port Ethernet Receiver

The NVT Model NV-ER1808i TBus Ethernet over Coax/UTP Receiver Hub is a 1U 19" rack mountable bus-architected media switch that has eight (8) TBus ports, capable of supporting up...

pt-120.jpg
Kramer: pt-120

Computer Graphics Video Over Twisted Pair Receiver

The PT120 is a twisted pair receiver for computer graphics video signals. The PT 120 converts a twisted pair signal from a PT-110 transmitter (or other compatible...

Input    1 RJ-45 connector
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output level    1.5Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    2.9% (worst case)
pt572pl.jpg
Kramer: pt-572-plus

HDMI Twisted Pair Receiver

The PT−572+ is a DGKat™ twisted pair receiver for HDMI signals. The PT−571 converts an HDMI signal to a single twisted pair signal and the...

pt-572hdcp-plus.jpg
Kramer: pt-572hdcp-plus

DVI Over Twisted Pair Receiver

The PT572HDCP is a DGKat ™ twisted-pair receiver for DVI signals. The PT-571HDCP converts the DVI to twisted pair signal and the PT 572HDCP converts the...

Inputs    1 DGKat twisted pair on an RJ-45 connector
Outputs    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector, DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 1.65Gbps
Power Source    12V DC, 250mA
Dimensions    6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
pvr164.jpg
Nitek: pvr164

16 Port Video, Power And Data Distribution Unit

The Nitek 16 Port Video, Power and Data Receiver PVR164 is a head-end distribution system for video, power and data for control. The system provides these functions for 16...

Camera Port    RJ45 Connector
Data In    2 wire push-in terminals
Video Out    BNC Connector
Power    Screw Terminals for 16-24 AWG wire
Power Requirements    Class 2 Low Voltage
qlxd4.jpg
Shure: qlxd4

Digital Wireless Receiver

The Shure Half-rack QLXD4 Digital Wireless Receiver quickly finds open frequencies and deploys them to transmitters via the one-touch sync

r1afv.jpg
Lectrosonics: r1a

Synthesized UHF Belt-Pack IFB Receiver
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and...
r400a.jpg
Lectrosonics: r400a

Digital Hybrid Wireless ® Diversity Receiver

The R400a is a high performance, triple-conversion, frequency synthesized, UHF receiver fully compatible with all Lectrosonics 400 series transmitters, and a number of analog...

ri830s.jpg
Sennheiser: ri-830-s

Conference Equipment Stethophone Infrared Receiver
The Sennheiser RI-830-S is a bodypack infrared receiver for two channel/stereo (2.3/2.8 MHz) systems. The RI830S includes BA 300 rechargeable battery. Requires...
ri900.jpg
Sennheiser: ri-900

Conference Equipment Stethophone Infrared Receiver
The Sennheiser RI-900 Stethophone infrared receiver for single channel (95 kHz, 2.3 MHz, or 2.8 MHz) or stereo (2.3 MHz / 2.8 MHz) systems. The RI900 includes BA 300...
Operating time    up to 12 hours
sdhmsrv4.jpg
StarDot Technologies: sdhmsrv4

StarDot Multi-Channel Long Distance Coxial Server; 4 channel

The StarDot Technologies SDHMSRV4 4-Channel MCLDC Network Receiver supports up to 4 MCLDC cameras connected via coaxial cable. The ONVIF Profile S compliant channel receiver can...

snca-zx104.jpg
Sony: snca-zx104

4 CH HYBRID CAMERA RECEIVER

The Sony SNCA-ZX104 Hybrid 4-Channel Camera Receiver allows you to seamlessly integrate images from 4 different hybrid cameras, enabling their easy and...

sra.jpg
Lectrosonics: sr

Dual-Channel Slot Mount ENG Receivers
Two-channel slot-mount Digital Hybrid Wireless® diversity receivers. The SR receiver offers two independent channels and fits into the standard video camera slots found on professional cameras. The...
sr-400.jpg
Electro Voice: sr-400

16-Channel Assistive Listening Receiver

The Electro Voice Telex SR-400 is a portable VHF 16-channel frequency-agile receiver with clear reception and treble boost control for improved intelligibility,...

ssd-rx010.jpg
Shany: ssd-rx-010

SDI Receiver, Support HD-SDI (SMPTE 292M)

The Shany SSD-RX010 SDI Coaxial Remote (COAXITRAN) Controller with Support 3G-SDI (SMPTE 424M), HD-SDI (SMPTE 292M) and SDI BNC Input Connector x1, SDI BNC

ssd-rx011.jpg
Shany: ssd-rx011

SDI Receiver, Support HD-SDI (SMPTE 292M)

The Shany SSD-RX011 SDI Receiver for Video, Audio, Control, Power & PoC with Support 3G-SDI (SMPTE 424M), HD-SDI (SMPTE 292M) and Support SDI: Full HD 1080P / HD 720P @25/30/50/60...

tp-10.jpg
Kramer: tp-10

Composite Video, S-Video & Stereo Audio Over Twisted Pair Receiver With IR Repeater

The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video...

Input    1 RJ-45 CAT 5 shielded connector (LINE IN)
Output    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector
Max. Output Level    Video: 2.6V; Audio: 4.6Vpp
Bandwidth    Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB
Non-Linearity    <0.05%
tp-120.jpg
Kramer: tp-120

Computer Graphics Video Over Twisted Pair Receiver

The TP-120 is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

Input    1 RJ-45 line in
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
S/N Ratio    80dB
tp-120-od.jpg
Kramer: tp-120-od

Computer Graphics Video Over Twisted Pair Receiver With EMP Protection

The TP-120-OD is a twisted pair receiver for computer graphics video signals. When used in conjunction with the PT-110 twisted pair transmitter (or other compatible Kramer...

Input    1 RJ-45 line in
Output    1 VGA/UXGA on a 15-pin HD connector
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
S/N Ratio    80dB
tp-122.jpg
Kramer: tp-122

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver
The TP-121 and TP122 are a twisted pair transmitter and receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121 transmitter converts computer graphics video...
Input    1 RJ-45 line in connector
Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Max. Resolution    WUXGA & 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
tp-122-od.jpg
Kramer: tp-122-od

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver With EMP Protection

The TP-122-od is a twisted pair receiver for computer graphics video, stereo and S/PDIF audio signals. The TP-121-od transmitter converts computer graphics video and unbalanced...

Input    1 RJ-45 line in connector
Output    Video: 1 VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Max. Resolution    WUXGA & 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < –80dB
tp-122xl.jpg
Kramer: tp-122n

XGA & Audio TPair Receiver

The TP−122N is a twisted pair receiver for computer graphics video, unbalanced stereo and S/PDIF audio signals. The unit receives a twisted pair signal from the...

tp122xl.jpg
Kramer: tp-122xl

VGA/A Twisted Pair Receiver

The TP−122xl is a high−performance twisted pair receiver for computer graphics video and unbalanced stereo audio signals. It converts the twisted pair input signal to...

tp-124.jpg
Kramer: tp-124

Computer Graphics Video, Stereo & S/PDIF Audio & Data Over Twisted Pair Receiver

The TP-124 is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs...

Input    1 RJ-45 OUT connector
Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
tp-124-od.jpg
Kramer: tp-124-od

Computer Graphics Video, Stereo & S/PDIF Audio & RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-124-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123-od converts computer graphics, audio, and RS-232...

Input    1 RJ-45 OUT connector
Outputs    Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio Analog 3.5mm mini jack
Max. Output Level    Video: 1V; Audio: 2.5V
Communication    RS-232 on 2-pin terminal block; maximum bitrate 19200bps
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz
tp-126-od.jpg
Kramer: tp-126-od

Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Receiver With EMP Protection

The TP-126-od is a twisted pair receiver for computer graphics video, unbalanced stereo audio and bi-directional RS-232 data signals. The TP 126-od receives a...

Inputs    1 RJ-45 LINE IN connector
Outputs    Video: 1 UXGA on a 15-pin HD connector; Audio: 1 S/PDIF on an RCA connector, 1 audio ANALOG on a 3.5mm mini jack
Max. Output Level    Video: 1.6V, Audio: 2.3V
Controls    Level: –7.5dB to 4.4dB,EQ.: 0dB to 33dBm (130m) @50MHz
RS-232 Baud Rate    Up to 19200bps
tp126xl.jpg
Kramer: tp-126xl

XGA Twisted Pair Receiver

The TP−126xl is an extended range twisted pair receiver for computer graphics video, unbalanced stereo audio and bidirectional RS−232 control command signals. The unit...

tp134.jpg
Kramer: tp-134

VGA/A/DATA TP Receiver

The TP−134 is a high−performance, extended range twisted pair receiver for computer graphics video, balanced/unbalanced stereo audio and bidirectional RS−232 data...

tp-142.jpg
Kramer: tp-142

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

Inputs    1 RJ-45 LINE IN connector
Outputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio S/PDIF RCA connector, 1 audio analog 3.5mm mini jack
Max. Output Level    Video: 1V, Audio: 2.5V
Controls    Level: –7.5dB to 4.4dB
EQ    0dB to 33dBm, (130m) @50MHz
tp-200axr.jpg
Kramer: tp-200axr

Computer Graphics Video & Stereo Audio Over Twisted Pair Receiver

The TP-200AXR is a twisted pair receiver for computer graphics video and unbalanced stereo signals. The TP-100AXR converts the input signals into a twisted pair signal and the...

Inputs    1 RJ-45 LINE IN connector
Outputs    1 RJ-45 line loop out, 2 VGA on 15-pin HD connectors, 2 S/PDIF on RCA connectors, 2 audio analog 3.5mm mini jacks
Max. Output Level    Video: 1.8V, audio: 2.9V
Controls    Level: –7dB to 4dB; EQ.: 0dB to 16dB (60m) @50MHz
Resolution    Up to WUXGA
tp-42.jpg
Kramer: tp-42

Component Video & S/PDIF Audio Twisted Pair Receiver

The TP-42 is a twisted pair receiver for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio signals into a...

Input    1 RJ-45 CAT 5 shielded connector (line in)
Outputs    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
Max. Output Level    Video: 2.1Vpp
Max. Resolution    1080i
Diff. Gain    0.15%
tp-50.jpg
Kramer: tp-50

1:2 Computer Graphics Video With S/PDIF Or Stereo Audio Twisted Pair Receiver

The TP-50 is a twisted pair receiver for computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP 50 converts the twisted pair signal...

Input    1 CAT 5 on an RJ-45 connector
Outputs    2 XGA outputs on 15-pin HD (F) connectors; 1 LINE LOOP on an RJ-45 connector; 2 unbalanced stereo audio outputs on 3.5mm mini jacks; 2 S/PDIF outputs on RCA connectors
Max. Output Level    Video: 2Vpp @max gain.; Audio: 4.6Vpp (analog)
Max. Resolution    WUXGA
Audio Bandwidth    22kHz
tp574.jpg
Kramer: tp-574

HDMI Twisted Pair Receiver

The TP−574 is a DGKat™ twisted pair receiver for HDMI, bidirectional RS−232 and infrared signals. The TP−573 converts the input signals to a twisted pair...

tp575.jpg
Kramer: tp-575

1:2 HDMI Twisted Pair Receiver & Transceiver

The TP−575 is a DGKat™ twisted pair line driver for HDMI over twisted pair signals. The unit receives a twisted pair signal and outputs both an HDMI and twisted pair...

tp580r.jpg
Kramer: tp-580r

HDMI Twisted Pair Receiver

The TP−580R is a high−performance, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580R receives an...

tp-580rxr.jpg
Kramer: tp-580rxr

HDMI Twisted Pair Receiver

The TP−580RXR is an extended range, HDBaseT twisted pair receiver for HDMI, bidirectional RS−232 and IR signals. The TP−580RXR receives an HDBaseT...

tp582r.jpg
Kramer: tp-582r

HDMI Twisted Pair Receiver

The TP−582R is a high−quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI...

tr515.jpg
Nitek: tr515

Active Video Balun Receiver For UTP Transmission From 100 To 1,500 Feet

The Niket Active Video Receiver for UTP Transmission TR 515 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works...

Receiver Unit    Receiver only
Size    1.6” H x 4.3” W x 2.4” D
Power Requirements    12 to 24 VAC or VDC, 45mA
Operating Distance    100 to 1,500 ft
Input    Balanced low voltage current loop
tr515x4.jpg
Nitek: tr515x4

Unshielded Twisted Pair (UTP) Transmission Up To 1,500 Feet (450 Meters)

The Nitek Unshielded Twisted Pair TR515x4 is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using the RK400 card...

Unit    Transceiver
Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (4) Balenced low voltage current loop
Output    (4) 1vpp composite video monochrome or color
tr515x8.jpg
Nitek: tr515x8

Active Video Receiver Card Up To 1,500 Feet (450 Meters)

The Nitek Modular Active Video Receiver Card TR515x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card...

Unit    Transceiver
Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (8) Balenced low voltage current loop
Output    (8) 1vpp composite video monochrome or color
tr560.jpg
Nitek: tr560

Active Video Balun Receiver For UTP Transmission From 100 To 6,000 Feet (30 To 1,800 Meters)

The Niket Receiver for UTP Transmission TR560 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works equally well...

Receiver Unit    Receiver only
Size    1.6” H x 4.3” W x 2.4” D
Power Requirements    12 to 24 VAC or VDC, 45mA
Operating Distance w/Passive Transmitter    100 to 3,000 feet
Operating Distance w/Active Transmitter Analog Video    500 to 7,200 feet
tr560x4.jpg
Nitek: tr560x4

Unshielded Twisted Pair (UTP) Transmission Up To 3,000 Feet (900 Meters)

The Nitek Unshielded Twisted Pair TR560x4 modular card is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using...

Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (4) Balenced low voltage current loop
Output    (4) 1vpp composite video monochrome or color
Common Mode Rejection    >70dB
tr560x8.jpg
Nitek: tr560x8

Active Receiver Card Up To 3,000 Feet (900 Meters)

The Nitek Modular Active Video Receiver Card TR560x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card...

Size    1 card slot
Power Requirements    Card powered by modular rack
Input    (8) Balenced low voltage current loop
Output    (8) 1vpp composite video monochrome or color
Common Mode Rejection    >70dB
ucr100.jpg
Lectrosonics: ucr100

UHF Compact Receiver

The Lectrosonics  UCR100 100 system was designed to operate with the new generation of DV camcorders, offering an ultra-compact receiver and modest cost, yet preserving the...

ucr401.jpg
Lectrosonics: ucr401

Digital Hybrid Wireless™ Compact Receiver
The UCR401 is a high performance compact UHF wireless microphone receiver for mobile applications such as ENG and film production. The compact size, battery and external power and rugged attached...
ucr411a.jpg
Lectrosonics: ucr411a

Digital Hybrid Wireless™ Compact Receiver
The UCR411A receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful...
ulxd4.jpg
Shure: ulxd4

Digital Wireless Receiver

The Shure ULXD4 is a half-rack, networkable wireless receiver for use with ULX-D ® Digital Wireless Systems.

With an expansive set of professional features, including...

vf-100r.jpg
Vicon: vf-100r

VIDEO RECEIVER; 12 dB, multimode fiber

The Vicon VF-100R VIDEO RECEIVER with 12 dB, multimode fiber, Multimode, NTSC/PAL, and comes with Power Supply

 

Available Configurations...

vf-1400r.jpg
Vicon: vf-1400r

VIDEO / DATA RECEIVER; single fiber; duplex RS-422

The VF-1400R Fiber-Optic Video Transmission Receiver for NOVA Control Systems from Vicon is a system designed to provide bidirectional video and RS-422 data on one multimode...

vf-30r.jpg
Vicon: vf-30rr

VIDEO RECEIVER; 3-channels, 13 dB, multimode fiber, rack mount

The Vicon VF-30R VIDEO RECEIVER with 3-channels, 13 dB, multimode fiber, and comes with rack mount. This receiver has Bi-Color LED Indicators, 640 TV Lines at 8MHz Bandwidth, and...

vh3251.jpg
Nitek: vh3251

32 Port Active UTP Video Hub 100 Feet To 1,500 Feet

The Nitek 32 port active video hub VH3251 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP...

Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
vh3256.jpg
Nitek: vh3256

32 Port Active UTP Video Hub 100 Feet To 6,000 Feet

The Nitek 32 port active video hub VH3256 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP...

Unit    Transceiver
Size    1 RU x 9.5" (D)
Power Requirements    24 VAC @ 450mA (Wall transformer provided with unit)
Video Input    Balanced low voltage current loop
Video Output    1 Vpp composite video monochrome or color
vi6100dr.jpg
Vigitron: vi6100dr

Active UTP Video And Data Receiver
The Vigitron Active UTP Transmission Vi 6100DR is an advanced active device that receives color or B&W video and data over separate point-to-point unshielded twisted pair wires at...
Video Format    NTSC, PAL, SECAM
Data    RS-422, RS-485, (2-wire or 4-wire)
Frequency    20 Hz to 6 MHz
Coax    75 Ohm
Twisted Pair    100 Ohms /- 20%, 24 AWG min up to 6000 feet (1830 m) Unshielded Category 2-7
vi6100vr.jpg
Vigitron: vi6100vr

Active UTP Video Receiver
The Vigitron Active UTP Transmission Vi 6100VR is an advanced active device that receives high resolution color or black and white video over unshielded twisted pair wires category...
Video Format    NTSC, PAL, SECAM
Frequency    20 Hz to 6 MHz
Coax    75 Ohm
Twisted Pair    100 Ohms /- 20%, 24 AWG min up to 6000 feet (1830 m) Unshielded Category 2-7
CMRR    70 dB
vp-5r.jpg
Kramer: vp-5r

1:5 Computer Graphics Video Twisted Pair Receiver & Distribution Amplifier

The VP5R is a high-performance distribution amplifier for computer graphics video signals on a twisted pair cable. The VP5R takes one twisted pair input and...

Input    1 RJ-45 connector
Outputs    5 XGA on 15-pin HD connectors
Bandwidth (-3dB)    445MHz
Max. Output level    1.4Vpp
Max. Resolution    WUXGA & 1080p
vr-field.jpg
Lectrosonics: vr-field

Battery-Powered Modular Receiver Systems
The wideband design provides the flexibility to deal with a congested RF spectrum in any field or studio environment by changing receiver modules. No tools are required to remove and install the...
Chassis Models   VRFIELDWB - 230 MHz bandwidth (Wideband); VRFIELDWBL - 222 MHz bandwidth (Wideband Low)
vrm 944.jpg
Lectrosonics: vrm-944

944-952MHZ VENUE RCVR W/POWER SUPPLY, NO ANTENNAS

From Lectrosonics, the VRM 944 Wideband Venue Receiver Master (VRM) unit is designed for use with the Lectrosonics Venue Wireless System. The system delivers the stability of...

vrm wb.jpg
Lectrosonics: vrm-wb

WIDE BAND VENUE RCVR W/POWER SUPPLY, NO ANTENNAS

The Lectrosonics VRM WB is a WIDE BAND VENUE RCVR W/POWER SUPPLY that comes with NO ANTENNAS.   The VRM WB is used for For Live Shows, Theater and Concerts, its...

vrs-e01.jpg
Lectrosonics: vrs-e01

STANDARD RECEIVER MODULE ONLY, SPECIFY BLOCK

As part of the Lectrosonics Venue System, the  VRS/E01 VRS Standard Receiver Module installs into the Venue Receiver Master (VRM) unit and provides 256 UHF selectable...

wp-1.jpg
Marshall Electronics: wp-1

RX + Box TX Wireless HDMI Series

The Marshall Electronics WP-1 Wireless HDMI Transmitter Receiver System without battery plate features a range of up to 100' line-of-sight with less than 1 millisecond of latency,...

wp-1c.jpg
Marshall Electronics: wp-1c

Dual Battery Holder for Canon LPE6 for use with WP-1 Series Transmission System

The Marshall Electronics WP-1C Wireless HDMI Transmitter Receiver System with dual Canon LP-E6 type battery plates features a range of up to 100' line-of-sight with less than 1...

wp-1n.jpg
Marshall Electronics: wp-1n

Dual Battery Holder for Nikon EL3 for use with WP-1 Series Transmission System

The Marshall Electronics WP-1N Wireless HDMI Transmitter Receiver System with dual Nikon EN-EL3 type battery plates features a range of up to 100' line-of-sight with less than 1...

wp-1p.jpg
Marshall Electronics: wp-1p

Single Battery Holder for Panasonic VW-VBG6

The WP-1P Wireless HDMI Transmitter Receiver System with single Panasonic VW-VBG6 type battery plate from Marshall Electronics features a range of up to 100' line-of-sight with...

wp-1s.jpg
Marshall Electronics: wp-1s

Single Battery Holder for Sony NPF970 for use with WP-1 Series Transmission System

The WP-1S Wireless HDMI Transmitter Receiver System with single Sony NP-F970 type battery plate from Marshall Electronics features a range of up to 100' line-of-sight with less...

wp-2c.jpg
Marshall Electronics: wp-2c

Dual Battery Holder for Canon LPe6 for use with WP-2 Series Transmission System

The WP-2C Wireless HDMI Transmitter Receiver System with dual Canon LE-E6 type battery plates from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

wp-2n.jpg
Marshall Electronics: wp-2n

Dual Battery Holder for Nikon EL3 for use with WP-2 Series Transmission System

The WP-2N Wireless HDMI Transmitter Receiver System with dual Nikon EN-EL3 type battery plates from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

wp-2p.jpg
Marshall Electronics: wp-2p

Single Battery Holder for Panasonic VW-VBG6

The WP-2P Wireless HDMI Transmitter Receiver System with single Panasonic VW-VBG6 battery plate from Marshall Electronics features stick-style HDMI dongle transmitter that can...

wp-2s.jpg
Marshall Electronics: wp-2s

Single Battery Holder for Sony NPF970 for use with WP-2 Series Transmission System

The WP-2S Wireless HDMI Transmitter Receiver System with single Sony NPF970 type battery plate from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

wr-pro.jpg
Azden: wr-pro

Basic receiver for any PRO transmitter

The standard camera-mount receiver for any “PRO” series transmitter, the Azden WR-PRO is a single channel receiver, but has two selectable operating frequencies to...



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.