Search

csdrp8.jpg
Orion: csdrp8

1x8 HD-SDI Distributor & Repeater, 8CH, SMPTE Type

The ORION HD-SDI CSDHDRC receiver is a converter which converts SDI (SMPTE) to HDMI and outputs to TV or monitor. The ORION Images CSDHDRC HD-SDI receiver support 1920 x 1080p,...

eha-crx.jpg
Everfocus: eha-crx

HD-SDI to HDMI Converter & Repeater

The Everfocus EHA-CRX is converter-repeater with HD-SDI in to HDMI out / HD-SDI out Video Bandwidth : Up to 1.5Gbps Video Support : 720p @ 50/59.94/60Hz, 1080i @ 50/59.94/60Hz, 1080p @ 25/30Hz...

eha-rpt.jpg
Everfocus: eha-rpt

HD-SDI Repeater

The Everfocus EHA-RPT is an HDcctv splitter repeater with HD-SDI in to HD-SDI out / HD-SDI out Video Bandwidth : Up to 1.5Gbps Video Support : 720p @ 50/59.94/60Hz, 1080i @ 50/59.94/60Hz, 1080p @\...

no-image.jpg
ViewZ: vz-rpt

HD-SDI Repeater set

ViewZ VZ-RPT repeater set (transmitter and receiver) extends over coax up to 1500 feet using 95 percent copper shielded RG6 or RG59.

VZ-RPT is designed...

dm-dr.jpg
Crestron: dm-dr

DigitalMedia CAT Repeater

The DM-DR is designed for use with DM ® CAT transmitters and receivers to enable extended cable lengths up to 450 ft (137 m)[1]. Up to 2 repeaters per DM device may be required....

ee328.jpg
Nitek: ee328

IP Network and PoE Repeater - up to 328 feet

The Nitek Ethernet & PoE Extender EE328 is a single unit IP Network and PoE Repeater that requires very little installation time and absolutely no set up or configuration....

Size    1.1"H x 1.6"W x 3.6"D
Ethernet    100BaseTX Full Duplex
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Connection Method    RJ45
Clamping Voltage    15 Volts
ee328w.jpg
Nitek: ee328w

Weatherproof Enclosure For The Network Repeater Unit
The Nitek Ethernet & PoE Extender Weatherproof enclosure EE328W is a single unit IP Network and PoE Repeater that requires very little installation time and absolutely no set up or...
Size    7.125"H x 4.77"W x 2.23"D
Ethernet    100BaseTX Full Duplex
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Connection Method    RJ45
Clamping Voltage    15 Volts
ev-20rps.jpg
TOA: ev-20rps

Digital Message Repeater

The Toa Electronics EV-20RPS is a Digital Message Repeater, with a Rack-mount and 3 Minutes Storage Capacity. The  EV-20RPS also Includes AD-246 AC Power...

pt-101h4.jpg
Kramer: pt-101h4

HDMI Repeater And Format Converter

The PT101H4 is a high-performance repeater and format converter for HDMI signals. The PT 101H4 combines previous HDMI formats and Ethernet to provide HDMI (v1.4...

Input    1 HDMI connector, 1 Ethernet on an RJ-45 TP connector
Outputs    1 HDMI connector, 1 S/PDIF on an RCA connector
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Input: HDMI; output: HDMI and HDCP
Power Source    5V DC, 450mA
pt-101hdcp.jpg
Kramer: pt-101hdcp

DVI Repeater

The PT101HDCP is a line driver/repeater for DVI-D video signals. The PT 101HDCP reclocks and equalizes the signal enabling multiple units to be cascaded.
...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Output    1 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 2.25Gbps bandwidth
Power Source    5V DC, 180mA
Dimensions    6.22cm x 5.23cm x 3.20cm (2.5" x 2.1" x 1.3") W, D, H
pt-101hxl.jpg
Kramer: pt-101hxl

HDMI Repeater

The PT101Hxl is a line driver/repeater for HDMI video signals. The PT 101Hxl reclocks and equalizes the signal enabling multiple units to be cascaded.
...

Input    1 HDMI connector
Output    1 HDMI connector
Bandwidth    Supports up to 2.25Gbps bandwidth
Compliance With Standards    HDMI, HDCP
Power Source    5V DC, 120mA
pt-4irex.jpg
Kramer: pt-4irex

Infrared Repeater With External IR Sensor Input

The PT4iREX is an infrared signal repeater that can operate at distances of up to approximately 75m (240ft). The PT 4iREX extends infrared signals in areas where...

Input    1 IR receiver
Outputs    4 IR emitters on 3.5mm mini connectors
Power Source    12V DC, 95mA
Dimensions    6.22cm x 5.24cm x 2.41cm (2.45" x 2.06" x 0.95") W, D, H
Weight    0.15kg (0.55lbs) approx
ssd-rp101.jpg
Shany: ssd-rp101

HD-SDI 1h Reapter

The Shany SSD-RP101 HD-SDI 1h Reapter supports 720P & 21080P with Video Signal Input/Output:1x BNC connector and Cable Transmission: 140 Meter

tp-330fw.jpg
Kramer: tp-330fw

2-Port Firewire ® 400 Over Twisted Pair Range Extender/Hub

The TP-330FW is a twisted pair range extender/hub for FireWire ® (IEEE 1394) signals. When used as a pair, one TP 330FW converts a FireWire ® signal into a...

Ports    2 FireWire® ports on 6-circuit FireWire® 400 connectors; 1 STP/UTP port on an RJ-45 connector
Transfer Rate    400Mbps
IEEE 1394 Standards    IEEE 1394a-2000, IEEE 1394-1995 @400Mbps max
ESD Line Protection    IEC 61000 4 2 (ESD) 15kV (air), 8kV (contact), IEC 61000 4 5 (lightning) 12A (8/20us), and IEC 61000 4 4 (EFT) 40A (5/50ns)
Power Source    12V DC, 60mA
va-130fw.jpg
Kramer: va-130fw

Firewire ® 800 Remote Repeater/HUB

The VA130FW is a high-performance bidirectional hub/repeater for 9-pin FireWire ® 800 (IEEE 1394b) signals. The VA 130FW increases the number of ports available...

Ports    2 FireWire® ports on 9-circuit FireWire® 800 connectors, 1 coax port on a BNC connector
Transfer Rate    800Mbps
IEEE 1394 Standards    IEEE 1394b-2002, IEEE 1394-1995, IEEE 1394b-2002 up to 800Mpbs
ESD Line Protection    IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact), IEC 61000-4-5 (lightning) 12A (8/20us), and IEC 61000-4-4 (EFT) 40A (5/50ns)
Power Source    5V DC, 60mA
vp-14.jpg
Kramer: vp-14

4 Port RS-232 Port Extender

The VP-14 is a port extender for RS-232 data signals. The VP 14 sends data from any port to the other three.

RS-232 Ports    4 null-modem RS-232-C compatible TX/RX signals
Power Source    12V DC, 30mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
Weight    0.28kg (0.62lbs) approx
Accessories    Power supply, mounting bracket
vp-314.jpg
Datavideo: vp-314

DV Repeater

The VP-314 is an In Line DV Signal Booster. Connects two 6 Pin DV cables together for extended cable runs. Cable runs of up to 200 metres can be achieved by using multiple...

vp-633.jpg
Datavideo: vp-633

100m SDI Repeater (Powered)

The Datavideo VP-633 is a SDI repeater with DC power input.

 

Also Available:

 

vp-634.jpg
Datavideo: vp-634

100m SDI Repeater (Unpowered)

The Datavideo VP-634 is a SDI repeater to use with VP-633. Can extend the signal for up to 100m.

 

Also Available:

vs-30fw.jpg
Kramer: vs-30fw

3-Port FireWire ® 800 Repeater/HUB

The VS30FW is a high-performance bi-directional hub/repeater for 9-pin FireWire ® 800 (IEEE 1394b) signals. The VS 30FW increases the number of ports available...

Ports    3 bi-directional IEEE 1394b 800Mbps (S800) ports
Transfer Rate    100/200/400/800Mbps (S100, S200, S400, S800)
Standards    IEEE 1394-1995, IEEE P1394a, IEEE P1394b
Power Source    12V DC, 500mA or from the attached PC
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
vs-40fw.jpg
Kramer: vs-40fw

4-Port FireWire ® 800 Repeater/HUB

The VS40FW is a high-performance bi-directional hub/repeater for 9-pin FireWire ® 800 (IEEE 1394b) signals. The VS 40FW increases the number of ports available...

Ports    4 bi-directional IEEE 1394b 800Mbps (S800) ports
Transfer Rate    100/200/400/800Mbps (S800, S400, S200, S100)
Standards    IEEE 1394-1995, IEEE P1394a, IEEE P1394b; fully supports the provisions of the IEEE P1394b Revision 1.33 at 1 Gigabit signaling rates; fully supports the provisions of the IEEE 1394-1995 Standard for High Performance Serial Bus and the P1394a Supplement; fully interoperable with FireWire™ and i.LINK™ implementation of IEEE Std 1394; provides three fully backward compatible (1394a 2000 fully compliant) bilingual P1394b cable ports at up to 800Mbps; fully compliant with OpenHCI requirements; provides three P1394b fully compliant cable ports at 100/200/400/800Mbps; full P1394a support includes: connection debounce, arbitrated short reset, multispeed concatenation, arbitration acceleration, fly-by concatenation, port disable/suspend/resume; extended resume signaling for compatibility with legacy DV devices
Power Source    12V DC, 1A
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
vs-4fw.jpg
Kramer: vs-4fw

4-Port FireWire® Repeater/HUB

The VS−4FW is a high−performance bidirectional hub/repeater for 6−pin FireWire ® (IEEE 1394) signals. It increases the number of ports available and/or extend the...

Ports    VS-4FW: Four 6-pin serial 1394 Ports
Transfer Rate    100/200/400Mbps
Standards    IEEE 1394-1995, P1394a
Power Source    12V DC, 200mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H
vs−8fw.jpg
Kramer: vs-8fw

8-Port FireWire® Repeater/HUB

The VS−8FW is a high−performance bidirectional hub/repeater for 6−pin FireWire ® (IEEE 1394) signals. It increases the number of ports available and/or extend the...

Ports    Eight 6-pin serial 1394 Ports
Transfer Rate    100/200/400Mbps
Standards    IEEE 1394-1995, P1394a
Power Source    12V DC, 300mA
Dimensions    12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.