The Vicon V1516-AMP VIDEO AMPLIFIER BOARD has outputs for monitors 1-16.  This Amplifier Board is compatible with the Vicon V1599 Pilot Ulutra Series.

Avail...

This item is DISCONTINUED.

The 103-AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. The

→ Inputs	1 Composite Video, 1Vpp/75Ω on an RCA Connector; 1 Unbalanced Stereo Audio, 1Vpp/33kΩ, on 3.5 Mm Mini Jack
→ Outputs	3 Composite Video, 1Vpp/75Ω on RCA Connectors; 3 Unbalanced Stereo Audio, 1Vpp/150Ω on 3.5mm Mini Jacks
→ Max. Video Output	2Vpp
→ Video Bandwidth (-3dB)	320MHz
→ Audio Bandwidth (-3dB)	20kHz

The 104-LN is a high-performance line amplifier for composite or SDI video signals. The 104 LN includes differential circuitry to help eliminate noise often found ...

→ Input	1 Video, Differential, 1Vpp/75Ω, on A BNC Connector
→ Outputs	4 Composite Video, 1Vpp/75Ω on BNC Connectors
→ Max. Output Level	1.6Vpp
→ Bandwidth (-3dB)	423MHz
→ Diff. Gain	0.22%

The 104-R is a high-performance distribution amplifier for RF signals. The 104 R takes one RF (CATV/MATV) signal and distributes it to four identical outputs.

→ Input	1 RF, 0.5Vpp/75Ω (max.) on an "F" type connector
→ Outputs	4 RF, 0.5Vpp/75Ω (max.) on "F" type connectors
→ Bandwidth	40MHz to 3000MHz ( /-3dB)
→ Coupling	AC
→ RF Gain	6dB typical across band

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five ide...

→ Input	1 unbalanced stereo/balanced mono, 1Vpp/33k#8486; on a 3.5mm mini jack
→ Outputs	5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks
→ Max. Output	5Vpp
→ Audio Bandwidth (-3dB)	20kHz
→ S/N Ratio	80dB unweighted

The 105-V is a high-performance distribution amplifier for composite video signals. The 105 V takes one input, provides correct buffering and isolation and distrib...

→ Input	1 Video, 1Vpp/75Ω on an RCA Connector
→ Outputs	5 Video, 1Vpp/75Ω on RCA Connectors
→ Max. Video Output	2Vpp
→ Video Bandwidth (-3dB)	400MHz
→ Diff. Gain	0.1%

The 105-VB is a high-performance distribution amplifier for composite video signals. The 105 VB takes one input, provides correct buffering and isolation and distr...

→ Input	1 Composite Video, 1Vpp/75Ω on A BNC Connector
→ Outputs	5 Composite Video, 1Vpp/75Ω on BNC Connectors
→ Max. Video Output	2Vpp
→ Video Bandwidth (-3dB)	400MHz
→ Diff. Gain	0.1%

The 106 is a high-quality distribution amplifier for balanced mono microphone signals. The 106 takes one dynamic or condenser microphone input and distributes the ...

→ input	1 balanced mono microphone on a 3-pin terminal block connector
→ Outputs	2 balanced mono line outputs on 3-pin terminal block connectors
→ Max. Output Level	27Vpp (22dBu)
→ Bandwidth	>40kHz
→ S/N Ratio	81dB

The 123-Vxl is a high-performance line amplifier for composite or SDI video signals. The 123 Vxl includes controls and circuitry to compensate for signal losses an...

→ Input	1 Looping Video, Differential, 1Vpp/75Ω on A BNC Connector
→ Outputs	3 Video, 1Vpp/75Ω on BNC Connectors
→ Max. Output Level	1.7Vpp
→ Bandwidth (-3dB)	425MHz
→ Diff. Gain	0.5%

The TV One 1T-DA-552 DVI-D Distribution Amplifier provides multiple outputs from a single DVI input for distribution to devices capable of receiving and/or displaying such signals....

Video Inputs	1x DVI-D via DVI-I Connector
Video Output	2x DVI-D via DVI-I Connectors
Freq. Bandwidth	2.25Gbps (HDMI Single Link)
Color Depth	10/12 bit Color Depth Display
PC/DVI resolutions	Up to 1920x1200

The TV One 1T-DA-672 1 x 2 4K HDMI Distribution Amplifier provides 2 independent HDMI outputs from a single HDMI...

The TV One 1T-DA-674 1 x 4 4K HDMI Distribution Amplifier provides 4 independent HDMI outputs from a single HDMI input for distribution to HDMI v1.4-compatible devices. This splitt...

The Tv One 1T-DA-674 HDMI Distribution Amplifier Provides 8 independent outputs from a single HDMI input for distribution to devices capable of receiving and/or d...

The TV One 1T-VGA-412 Distribution Amplifier provides 2 outputs for use in any situation requiring multiple outputs from a single PC or other RGB video source. Its video bandwidth ...

Video Input Signal Type	RGBHV, RGBS, RGsB, YPbPr
Video Connector	1x HD-15 Female
R-G-B Level Range	0.5-2.0 Vp-p
Maximum Resolution	2560x1600
Video Outputs	2x via HD-15 Female Connectors

The 6505 is a high-performance distribution amplifier for S/PDIF digital audio signals. The 6505 takes one S/PDIF input and distributes the signal to five identica...

→ Input	1 S/PDIF digital audio input on an RCA connector
→ Outputs	5 S/PDIF digital audio outputs on RCA connectors
→ Standards	CP1201, IEC-60958, AES-3id and S/PDIF
→ Sample Rate	32kHz to 192kHz
→ Input Impedance	75Ω

The 900-N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. With the 900 N, either input can deliver a speaker output of 8.4 w...

→ Inputs	1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector
→ Output	1 stereo loudspeaker output on a 4-pin terminal block connector
→ Output Power	8.4W RMS per channel into a 4Ω load
→ Output Music Power	35W RMS per channel into a 4Ω load
→ Bandwidth (-3dB)	24kHz

The 900-xl is a high-performance power amplifier for line level stereo audio signals. The 900 xl accepts unbalanced audio signals on either of two RCA or 3.5mm con...

→ Inputs	1 unbalanced stereo audio on a 3.5mm mini jack connector; 1 unbalanced stereo audio on RCA connectors
→ Output	1 stereo differential speaker output
→ Output Power	2x10W (4Ω)
→ Input Sensitivity	460mV
→ Output Music Power	2x40W (4Ω)

The 901 is a high-performance integrated personal stereo amplifier for unbalanced stereo signals. The 901 accepts a stereo audio signal and delivers a speaker outp...

→ Inputs	1 unbalanced stereo audio, 1Vpp/50Ω on RCA connectors; 1 mono microphone, 5mV/3.2Ω (condenser) 4.8Ω (dynamic) with a type selector, on a 6.5mm phone jack
→ Outputs	Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output
→ Max. Output Level	8Vpp at Hi-Z load (headphones)
→ Bandwidth (-3dB)	37kHz
→ S/N Ratio	74dB

The 903 is a high-performance integrated personal amplifier for unbalanced stereo audio signals. The 903 allows selection between four inputs and delivers a speake...

→ Inputs	1 unbalanced stereo audio 1Vpp/50Ω on a 3.5mm mini jack; 3 unbalanced stereo audio 1Vpp/50Ω on RCA connectors
→ Outputs	Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in
→ Output Power	2x10W (4Ω)
→ Output Music Power	2x40W (4Ω)
→ Bandwidth (-3dB)	20kHz

The 906 is a high-performance controllable power amplifier for line-level stereo audio signals. The 906 accepts either an unbalanced stereo audio signal on RCA con...

→ Inputs	1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
→ Outputs	1 speaker stereo audio on a 4-pin terminal block connector
→ Output Power	2 x 5.3W per channel into 8Ω; 2 x 6.8W per channel into 4Ω
→ Output Music Power	2 x 22W per channel into 8Ω; 2 x 28W per channel into 4Ω
→ Bandwidth (-3dB)	32.5kHz

The 907 is a high-performance power amplifier for line-level stereo audio signals. The 907 accepts a balanced stereo audio signal on a terminal block connector and...

→ Input	1 balanced stereo audio on a terminal block connector
→ Output	1 balanced stereo audio (speakers) on a terminal block connector
→ Output Power	40 watts per channel into 8Ω
→ Output Music Power	150W per channel into 8Ω
→ Input Sensitivity	1.2Vrms

The 907xl is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced s...

The 908 is a high-performance audio amplifier for line-level stereo audio signals. The 908 accepts either a balanced or unbalanced stereo audio signal and delivers...

→ Inputs	1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
→ Output	1 speaker stereo audio on a 4-pin terminal block connector
→ Input Sensitivity	Unbalanced: 360mVpp; balanced: 220mVpp
→ Max. Voltage Gain	Unbalanced: 35dB; balanced: 40.5dB
→ Output Power	40W per channel into 8Ω

The 912 is a high−performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 8.4 watts RMS power per channel into a...

TOA A-2240 MIXER/POWER AMPLIFIER offers versatile features and outstanding value for installed sound applications such as schools, offices, restaurants, shops, factories, houses of...

The TOA A-903MK2 are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical - such as in paging and music...

The TOA A-9060DHM2 Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as exis...

The A-9120DHM2 Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing...

The A-9240SHM2 Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing...

The Crestron AMP-2800 amplifier is designed to complement the Crestron Avia™ family of Digital Signal Processors, and is well-suited for all types of commercial audio application...

The Crestron AMP-4600 amplifier is designed to complement the Crestron Avia™ family of digital signal processors, and is well-suited for all types of commercial audio application...

The Crestron AMP-X300 is a high performance, space saving, energy efficient, professional grade amplifier solution that’s totally configurable, yet simple to use. Whether you nee...

The Crestron AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface‑mountable design that installs virtua...

The black AV-20D Micro Amplifier from TOA Electronics is a 2 channel digital amplifier for speech and general announcement. It introduces a new standard in small amperes for plenum...

The Toa Electronics AV-60S-AM is a single-channel digital amplifier for speech and general announcement. This compact amplifier is equipped with a switching power supply circuit, a...

The TOA BA-235 Amplifier provides 35 watts of power to 4 ohm, 25 & 70V speakers in installed sound applications. The amplifier features a line input, volume control and recessed tr...

BrightEye 33 is a high performance audio distribution amplifier for the broadcast and recording industry. Exceptional performance features include excellent response, noise and dis...

BrightEye 40 is a reclocking serial digital video distribution amplifier with four outputs. The SDI input will automatically equalize up to 300 meters (1000 feet) of digital cable....

BrightEye 41 is a distribution amplifier that accepts analog video, AES digital audio, or Tri-Level Sync signal. It can also be used with SMPTE 310M, Dolby E and AC-3 signals. It p...

BrightEye 42 is a reclocking distribution amplifier that can be used with high definition, standard definition or ASI signals. When used with SD or ASI input signals, the serial in...

BrightEye 43 is a reclocking distribution amplifier that can be used with standard definition video signals, 3 Gb/s and 1.5 Gb/s high definition signals, or ASI signals. The signal...

The Toa BG-2035 Mixer Amplifier is designed to operate as the front end to any commercial audio system in background music (BGM), foreground music, paging applications and more. Th...

The CD8-A code distribution repeats and extends single telemetry to 8 isolated and buffered telemetry through each port (RS-485). In case of isolated RS-485 telemetry, the code di...

The transmission qualities of Electro-Voice CP3000S power amps are simply extraordinary. The new switching power supply technology, completely designed from scratch and the consist...

Load Impedance	2 ohms, 4 ohms, 8 ohms
Maximum Midband Output Power - THD = 1%, 1kHz, Dual Channel	2 ohms: 1600 W; 4 ohms: 1100 W; 8 ohms: 600 W
Rated Output Power - THD < 0.1%, 20Hz ... 20kHz	2 ohms: -; 4 ohms: 900 W; 8 ohms: 450 W
Max. Single Channel Output Power - Dynamic-Headroom, IHF-A	2 ohms: 2600 W; 4 ohms: 1400 W; 8 ohms: 720 W
Max. Single Channel Output Power - Continuous, 1kHz	2 ohms: 2100 W; 4 ohms: 1300 W; 8 ohms: 660 W

This item is DISCONTINUED.

The transmission qualities of Electro-Voice CP4000S power amps are simply extraordinary. The new switching power ...

Load Impedance	2 ohms, 4 ohms, 8 ohms
Maximum Midband Output Power - THD = 1%, 1kHz, Dual Channel	2 ohms: 2100 W; 4 ohms: 1500 W; 8 ohms: 900 W
Rated Output Power - THD < 0.1%, 20Hz ... 20kHz	2 ohms: -; 4 ohms: 1200 W; 8 ohms: 600 W
Max. Single Channel Output Power - Dynamic-Headroom, IHF-A	2 ohms: 2900 W; 4 ohms: 1800 W; 8 ohms: 1000 W
Max. Single Channel Output Power - Continuous, 1kHz	2 ohms: 2600 W; 4 ohms: 1700 W; 8 ohms: 950 W

Designed for the contractor, the Electro-Voice CPS 2.12 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on v...

Amplifier Gain	32 dB
Analog Inputs	2, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1800 Watts

Designed for the contractor, the Electro-Voice CPS2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via...

Amplifier Gain	32 dB
Analog Inputs	2, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω	900 Watts

Designed for the contractor, the Electro-Voice CPS 2.9 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on vi...

Amplifier Gain	32 dB
Analog Inputs	2, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1250 Watts

The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation. ...

Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs	4, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v	1000 Watts

The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation. ...

Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs	4, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v	500 Watts

The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation. ...

Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs	8, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v	500 Watts

Designed for the contractor, the Electro-Voice CPS-2.4MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via...

Amplifier Gain	32 dB
Analog Inputs	2, electronically balanced, Phoenix-type
Audio Network	No
CAN Bus Interface	Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω	650 Watts

The DA-250D from Toa Electronics is a high-quality 1RU digital amplifier designed for installed applications. It offers two channels of input and output, with removable terminal bl...

The DA-550F-HL from TOA Electronics is a high-quality, rack mountable four-channel digital amplifier. Designed for highly efficient operation, the DA-550F-HL is capable of outputti...

The Crestron DM-NAX-8ZSA is a next generation Audio-over-IP (AoIP) amplifier that puts Crestron multiroom audio distribution on the network. Streaming services are built-in with me...

The Azden IRR-40P 2-Channel Infrared Receiver is designed for use with Azden IR (Infrared) wireless transmitters (sold separately). The IRR-40P features a built-in amplifier with 2...

The Lectrosonics PA8 is an eight-channel, single rack space amplifier ideal for zoned, distributed loudspeaker systems. It has eight separate amplifiers within the chassis, each wi...

The M-9000M2 Pre-Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existi...

The P-9060DH 60w 2 Channel Power Amplifier @ 70V from Toa Electronics is a high-performance digital amplifier designed for installed applications. This dual rack space unit can be ...

The P-9120DH 120w 2 Channel Power Amplifier @ 70V from Toa Electronics is a high-performance digital amplifier designed for installed applications. This dual rack space unit can be...

This item is DISCONTINUED.

The Electro-Voice P-3000RL is a flagship, with 2 x 1300 watts into 4 ohms and 2 x 1800 watts into 2 ohms, the dig...

Amplifier Gain	34 dB
Connector Type	Speakon NL4
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	1300 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	850 Watts

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where l...

Continuous Rated Power (1 kHz, THD 1%) 100v	270 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v	270 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v	250 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v	250 Watts
DIM 30	0.1 %

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where l...

Amplifier Gain	34.3 dB
Continuous Rated Power (1 kHz, THD 1%) 100v	270 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	270 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v	270 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	135 Watts

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where l...

Amplifier Gain	34 dB
Continuous Rated Power (1 kHz, THD 1%) 100v	430 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	430 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v	430 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	215 Watts

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where l...

Amplifier Gain	34.3 dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω	450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	220 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	400 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω	200 Watts

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where l...

Amplifier Gain	30 dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω	160 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	150 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω	75 Watts

The Speco Technologies PBM120-AU represents the next generation of Speco Technologies’ commercial public address amplifiers. We have taken your input and created the perfect amp...

Professional quality 7-channel amplifiers offering tremendous power, control, and monitoring to complement the PSPHD PROCISE® High-Definition Professional Surround Sound Processor.

...

Output Power	400 Watts per channel at 8 Ohms;
Power Bandwidth	5Hz to 45kHz -3dB
Frequency Response	20Hz to 20kHz ±0.1dB
THD	0.02%
IMD	0.05%

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five ide...

→ Input	1 unbalanced stereo audio on a 3.5mm mini jack
→ Outputs	2 unbalanced stereo audio on 3.5mm mini jacks
→ Max. Output Level	5Vpp
→ Bandwidth (-3dB)	>100kHz
→ S/N Ratio	85dB @1kHz

The PT102SN is a high-performance video distribution amplifier for s-Video (Y/C) video signals. The PT 102SN takes one input, provides correct buffering and isolat...

→ Input	1 s-Video on a 4-pin connector
→ Outputs	2 s-Video on 4-pin connectors
→ Max. Output level	1.3Vpp
→ Bandwidth (-3dB)	150MHz
→ Diff. Gain	0.05%

The PT102VN is a distribution amplifier for composite video or SDI signals. The PT 102VN takes one input, provides correct buffering and isolation and distributes ...

→ Inputs	1 Video, 1Vpp/75Ω on A BNC Connector
→ Outputs	2 Video, 1Vpp/75Ω on BNC
→ Max. Video Output	2Vpp
→ Video Bandwidth (-3dB)	430MHz
→ Diff. Gain	0.05%

The PT103V is a composite video distribution amplifier. The PT 103V takes one input, provides correct buffering and isolation and distributes the signal to three i...

→ Input	1 Video, 1Vpp/75Ω on an RCA Connector
→ Outputs	3 Video, 1Vpp/75Ω on RCA Connectors
→ Max. Output Level	1.9Vpp
→ Bandwidth (-3dB)	407MHz
→ Diff. Gain	0.04%

Building on a legacy of power and performance, the Q1212 amps take Electro-Voice’s unique amplifier philosophy to a new level of efficiency and value. The Q1212 a...

Amplifier Gain	32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	1200 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	750 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	1100 Watts

Building on a legacy of power and performance, Q44-II amps take Electro-Voice’s unique amplifier philosophy to a new level of efficiency and value. The Q44-II ach...

Amplifier Gain	32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω	650 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	270 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	400 Watts

Building on a legacy of power and performance, the Q66-II amps take Electro-Voice’s unique amplifier philosophy to a new level of efficiency and value. The Q66-II...

Amplifier Gain	32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω	900 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	600 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	380 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	500 Watts

Building on a legacy of power and performance, the Q99 amps take Electro-Voice’s unique amplifier philosophy to a new level of efficiency and value. The Q99 achie...

Amplifier Gain	32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω	1250 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	900 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	550 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω	800 Watts

This item is DISCONTINUED.

The SWAMPE4 is a 4-zone expander for the Sonnex™ Multiroom Audio System (SWAMP-24X8) from Crestron®. It adds ...

Input Signal Types	Sonnex Link
Output Signal Types	Stereo speaker level
Typical of up to 4 amplified stereo zone outputs - Digital-To-Analog Conversion	24-bit 48 kHz
Typical of up to 4 amplified stereo zone outputs - Output Power	140 Watts per channel at 8 Ohms;
Typical of up to 4 amplified stereo zone outputs - Damping Factor	>200 @ 20 Hz

This item is DISCONTINUED.

The SWAMPE8 is an 8-zone expander for the Sonnex™ Multiroom Audio System (SWAMP-24X8) from Crestron®. It adds ...

Input Signal Types	Sonnex Link
Output Signal Types	Stereo speaker level
Typical of up to 8 amplified stereo zone outputs - Digital-To-Analog Conversion	24-bit 48 kHz
Typical of up to 8 amplified stereo zone outputs - Output Power	140 Watts per channel at 8 Ohms; 240 Watts per channel at 4 Ohms;
Typical of up to 8 amplified stereo zone outputs - Damping Factor	>200 @ 20 Hz

Designed for the most demanding applications in both touring and installed sound, Electro-Voice's ultra-reliable Tour Grade TG5 amplifiers offer a unique combination of output powe...

Amplifier Gain	39, 35, or 32 dB Switchable
Analog Inputs	Yes
Continuous Rated Power (1 kHz, THD 1%) 2Ω	2000 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	1450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	850 Watts

This item is DISCONTINUED.

Designed for the most demanding applications in both touring and installed sound, Electro-Voice's ultra-reliable Tour Grade

Amplifier Gain	41.5/35/32 dB Switchable
Analog Inputs	Yes
Continuous Rated Power (1 kHz, THD 1%) 2Ω	3500 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω	2500 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω	1500 Watts

The ToteVision CV-400 is a reclocking active distribution amplifier designed to recover the embedded clock from a digital video signal when it is distributed.

The TP-105HD is a line driver and distribution amplifier for analog video over twisted pair signals. The TP 105HD takes a twisted pair input and distributes it to ...

→ Input	1 RJ-45 connector
→ Outputs	2 RJ-45 connectors
→ Max Output Level	1.6Vpp
→ Max. Resolution	WUXGA & 1080p
→ Diff. Gain (PAIR)	1.2%

The TP-112HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 112HD converts a computer graphics video or HDTV signal on a 15-pin...

→ Input	1 XGA/HD on a 15-pin HD (F) connector
→ Outputs	2 twisted pair on RJ-45 connectors
→ Max. Output Level	1.7Vpp
→ Max. Resolution	WUXGA & 1080p
→ Diff. Gain	4%

The TP-305A is a high-performance twisted pair receiver for computer graphics video, audio and RS-232 signals. The TP 305A takes one twisted pair input and provide...

→ Input	1 LINE IN on an RJ-45 connector
→ Outputs	5 LINE OUT on RJ-45 connectors; 1 UXGA video output on a 15-pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 S/PDIF output on an RCA connector; 1 RS-232 on a 2-pin terminal block connector
→ Max. Output Level	Video: 1.6V; Audio: 2.3V
→ Power Outputs	12V DC, 0.5A max via each RJ-45 output (pins 4, 5)
→ Max. Resolution	WUXGA & 1080p

The Crestron UC-SB1 is a sleek and stylish sound bar comprising a high-performance conferencing speakerphone in one stunning front-of-room device. Installs cleanly beneath the room...

The Crestron UC-SB1-CAM is a sleek and stylish sound bar comprising a high-performance conferencing speakerphone and camera in one stunning front-of-room device. Installs cleanly ...

The Lectrosonics UFM230L Inline Antenna Filter and Amplifier Module is a small, yet rugged device that installs between wireless receivers and antennas that are in...

The Lectrosonics UFM50 is an in-line device designed to boost UHF Radio-Frequency gain up to 12dB. The UFM50 is an ideal solution to long antenna cable runs due to large venue inst...

The VA-8xl is a high-performance 8 channel-balanced stereo input volume controller for balanced audio signals on terminal block connectors. The volume of each L & R stereo channel ...

→ Input	8 balanced stereo audio 4dBu/30kΩ on detachable terminal blocks
→ Output	8 balanced stereo audio 4dBu/50Ω on detachable terminal blocks
→ Gain	-95dB to 31dB
→ Max. Output Level	>20dBu balanced (THD N <0.01)
→ Bandwidth ( - 3dB)	20Hz to 40kHz

This product has been discontinued. For an alternative, please contact [email protected]

The VM-100CB

→ Input	1 component video (Y, Pb/Cb, Pr/Cr), looping on BNC connectors
→ Outputs	10 component video (Y, Pb/Cb, Pr/Cr) on BNC connectors
→ Max. Output level	2.2Vpp
→ Bandwidth (-3dB)	450MHz
→ Diff. Gain	0.03%

The VM1021 is a high-performance distribution amplifier for composite or SDI video signals. The VM 1021 provides controls to compensate for signal losses inherent ...

→ Input	1 Composite Video Or A Single Component, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
→ Outputs	20 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
→ Video Bandwidth(-3dB)	350MHz
→ Diff. Gain	0.1%
→ Diff. Phase	0.07deg

Kramer VM-1021N 1:20 Composite/SDI Video Distribution Amplifier is a high−performance distribution amplifier for composite or SD−SDI video signals. It provides controls to comp...

The VM1055 is a high-performance distribution amplifier for RGBHV video signals. The VM 1055 provides correct buffering and isolation and distributes the signal to...

→ Inputs	1x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors, (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
→ Outputs	5x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
→ Max. Video Output	2Vpp
→ Video Bandwidth (-3dB)	300MHz
→ Diff. Gain	0.1%

The VM10HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 10HDxl takes one input, provides reclocking and equalization and distribute...

→ Inputs	1 SMPTE-259M/292M/424M serial video, 75Ω on a BNC connector
→ Outputs	10 equalized and reclocked SMPTE-259M/292M/424M outputs, 75Ω on BNC connectors;1 looped GENLOCK 75Ω/Hi-Z on a BNC connector
→ Max. Output level	800mVpp/75Ω
→ Maximum Data Rate	Up to 2.97Gbps
→ Coupling	AC

The VM10xl is a state of the art, broadcast quality 1:10 distribution amplifier for composite or SDI video signals with unbalanced stereo or balanced mono audio. The VM 10x...

→ Inputs	1 Composite Video, Looping, 1Vpp/75Ω with Termination Switch on BNC Connectors. 2 Balanced Stereo/Mono Audio, Looping, 1Vpp/50kΩ on RCA Connectors
→ Outputs	10 Composite Video, 1Vpp/75Ω on BNC Connectors. 10 Balanced Stereo/Mono Audio, 1Vpp/50Ω on RCA Connectors
→ Max. Output Level	Video: 1.6Vpp; Audio: 26.5Vpp
→ Bandwidth (-3dB)	Video 360MHz; Audio 100kHz
→ Diff. Gain	0.07%

The VM1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1110xl can also be configured as a 1: 5 distrib...

→ Inputs	2 balanced stereo audio 4dBu/50kΩ on XLR (F) connectors
→ Outputs	10 balanced stereo audio 4dBu/50Ω on XLR (M) connectors
→ Max. Output Level	23.8Vpp
→ Bandwidth (-3dB)	>100kHz
→ S/N Ratio	89.3dB

The VM1120 is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1120 can also be configured as a 1:20 distributio...

→ Inputs	2 balanced stereo or 4 balanced mono audio 4dBu/50kΩ on XLR (F) connectors
→ Outputs	10 balanced stereo or 20 balanced mono audio 4dBu/50Ω on XLR (M) connectors
→ Max. Output Level	23.8Vpp
→ Bandwidth (-3dB)	>100kHz
→ S/N Ratio	89.3dB

The VM−114H is a switcher/distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals and distributes it to f...

The VM−114H2C is a high−performance switcher and distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signal...

The VM-114H4C is a high-performance switcher and distribution amplifier for HDMI and twisted pair signals. The VM 114H4C reclocks and equalizes one of two selectab...

→ Inputs	1 HDMI connector; 1 twisted pair on an RJ-45 connector
→ Outputs	4 twisted pairs on RJ-45 connectors
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard	Supports HDMI and HDCP
→ Controls	Input select button, EDID select button, panel lock button

The VM12HDCP is an HDCP-compliant distribution amplifier for DVI-D signals with resolution up to 1080p or UXGA. The VM 12HDCP reclocks and equalizes the signal and...

→ Input	1 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
→ Outputs	12 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
→ Bandwidth	1.65Gbps
→ Controls	SELECT and READ buttons for selecting and storing EDID information
→ Power Source	100-240V AC, 50/60Hz, 11VA

The VM1610 is a high-performance distribution amplifier for balanced stereo signals. The VM 1610 can also be configured as two 1:5 balanced stereo audio distributi...

→ Inputs	2 balanced stereo audio 4dBu, 50kΩ on detachable terminal blocks
→ Outputs	10 (or 2x5) balanced stereo audio 4dBu, 50Ω on detachable terminal blocks
→ Audio Bandwidth (-3dB)	>100kHz
→ Max. Audio Output	18Vpp
→ Gain Range	0.5dB to 9.5dB (4 trimmers, 2 for each input channel)

The VM16H is a distribution amplifier for HDMI signals. The VM 16H reclocks and equalizes the signal and distributes it to 16 identical outputs.
 

The VM−1H4C is a high−quality twisted pair distribution amplifier for HDMI signals. The unit receives serial commands and IR signals transparently via the RS−232 port and the...

The VM20ARII is a multi-format, high-performance distribution amplifier that can also be configured for composite video and unbalanced stereo audio signals. The VM20ARII

→ Inputs	4 Video, Looping, 1Vpp/75Ω on BNC Connectors with Termination Switches; 4 Unbalanced Stereo
→ Outputs	Video: 20 (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5) 1Vpp/75Ω on BNC Connectors; Audio: 20 (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5) Stereo or Balanced Mono, 4dBu/50Ω, 27Vpp Max. on RCA Connectors
→ Video Bandwidth(-3dB)	430MHz
→ Audio Bandwidth(-3dB)	110kHz
→ Diff. Gain	0.06%

The VM216H is a distribution amplifier for HDMI signals. The VM 216H reclocks and equalizes one of 2 selectable input signals and distributes it to 8 or 16 identic...

→ Inputs	2 on HDMI connectors
→ Outputs	16 on HDMI connectors
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard	Supports HDMI and HDCP
→ Controls	EDID, IN 1, IN 2, IR remote controller and LOCK buttons

The VM22H is a distribution amplifier for HDMI signals. The VM 22H reclocks and equalizes one of two selectable input signals and distributes it to two identical o...

→ Inputs	2 HDMI connectors
→ Outputs	2 HDMI connectors
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard	Supports HDMI and HDCP
→ Controls	EDID SETUP button, input select button, IR

The VM22HD is a high-performance distribution amplifier for HD-SDI and dual link HD-SDI signals. The VM 22HD can be configured as two 1:2 distribution amplifier, o...

→ Inputs	2 SMPTE-259M, 344M, 292M, 372M serial video, 75Ω on a BNC connector
→ Ouptuts	4 equalized and reclocked SMPTE-259M, 344M, 292M, 372M outputs, 75Ω on BNC connectors
→ Max. Output Level	800mVpp/75Ω
→ Max. Baud Rate	1.485Gbps
→ Power Source	12VDC, 250mA

The VM24H is a distribution amplifier for HDMI signals. The VM 24H reclocks and equalizes one of 2 selectable input signals and distributes it to 4 identical outpu...

→ Inputs	2 HDMI connectors
→ Outputs	4 HDMI connectors
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Compliance with HDMI Standard	Supports HDMI and HDCP
→ controls	EDID SELECT, EDID READ, IN 1, IN 2 buttons, RS-232, IR

The VM−24HC is a high−performance switcher and distribution amplifier for HDMI signals. The unit accepts one of two HDMI inputs and distributes the selected signal to four HDMI...

The VM24HDCP is a high-performance distribution amplifier for DVI signals. The VM 24HDCP reclocks and equalizes one of two input signals and distributes it to four...

→ Inputs	2 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
→ Outputs	4 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Controls	EDID SELECT, EDID READ, IN 1, IN 2 buttons, RS-232, IR
→ Indicator LEDs	Output status LEDs

The VM25 is a high-performance distribution amplifier for composite video signals. The VM 25 takes one input, provides correct buffering and isolation, and distrib...

→ Input	1 Composite Video, Looping on an RCA Connector
→ Outputs	25 Composite Video on RCA Connectors, 1 Loop on an RCA Connector
→ Max. Output Level	1.7Vpp
→ Bandwidth (-3dB)	430MHz
→ Diff. Gain	0.08%

The VM−28H is a distribution amplifier for HDMI signals. It reclocks and equalizes one of 2 selectable input signals and distributes it to 8 identical outputs.

This item has been DISCONTINUED. Please contact [email protected] for a suitable alternative.

The VM-2C

→ Input	1 component video (Y, PB/CB, PR/CR, or Y, U, V) on RCA connectors, 1Vpp/75Ω
→ Outputs	2 component video (Y, PB/CB, PR/CR, or Y, U, V) on RCA connectors, 1Vpp/75Ω
→ Max. Output level	2.4Vpp
→ Bandwidth (-3dB)	510MHz
→ Diff. Gain	0.03%

The VM-2DP is a high-quality distribution amplifier for DisplayPort signals. The VM-2DP distributes one input signal to two identical outputs.
 

The VM-2HD is a high-performance distribution amplifier for HD-SDI signals. The VM-2HD takes one input, provides reclocking and equalization and distributes the si...

→ Input	1 SMPTE-259M/292M/344M SDI, 75Ω on a BNC connector
→ Outputs	2 equalized and reclocked SMPTE-259M/292M/344M outputs 75Ω on BNC connectors
→ Maximum Data Rate	1.485Gbps
→ Max. Output Level	800mVpp/75Ω
→ Coupling	AC

This item has been DISCONTINUED. Please contact [email protected] for a suitable alternative.

The VM-2HDCPxl...

→ Input	1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
→ Outputs	2 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
→ Compliance with Standards	Supports DVI 1.1 and HDCP
→ Max. Resolution	Up to WUXGA (1920x1200), 1080p
→ Bandwidth	2.25Gbps

The VM-2HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM-2HDxl takes one input, provides reclocking and equalization and distributes...

→ Input	1 SMPTE-259M/292M/344M/424M serial video, 75Ω on a BNC connector
→ Outputs	2 equalized and reclocked SMPTE-259M/292M/344M/424M outputs 75Ω on BNC connectors
→ Maximum Data Rate	2.97Gbps
→ Max. Output Level	800mVpp/75Ω
→ Coupling	AC

The VM-2Hxl is a distribution amplifier for HDMI signals. The VM 2Hxl reclocks and equalizes the signal and distributes it to two identical outputs.
 

VM-2N: 1:2 Composite Video & Stereo Audio Distribution Amplifier The VM-2N is a high-performance distribution amplifier for composite or SDI video and unbalanced s...

→ Input	1 Composite Video - DC Coupled, 1Vpp/75Ω on A BNC Connector; 1 Balanced Stereo/Mono Audio - 4dB/50kΩ on RCA Connectors
→ Output	2 Composite Video - 1Vpp/75Ω on BNC Connectors; 2 Balanced Stereo/Mono Audio - 4dB/50Ω on RCA Connectors
→ Max. Audio Level (-3dB)	22dB
→ Video Bandwidth	Exceeding 400MHz
→ Audio Bandwidth	>100kHz (1dB)

The VM-30AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. VM 30AV provides controls to compensate for signal losses ...

→ Inputs	1 Video, 1 Vpp/75Ω on an RCA Connector; 1 Audio Stereo, 1Vpp/70kΩ on RCA Connectors
→ Outputs	3 Video, 1 Vpp/75Ω on RCA Connectors; 3 Audio Stereo, 1Vpp/150Ω on RCA Connectors
→ Max. Output Level	Video: 2Vpp; Audio: 5.4Vpp
→ Bandwidth (-3dB)	Video: 430MHz, Audio: 100kHz
→ Diff. Gain	0.04%

The VM-30AVB is a compact distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 30AVB provides controls to compensate for s...

→ Inputs	1 Video, 1 Vpp/75Ω on A BNC Connector; 1 Audio Stereo, 1Vpp/70kΩ on RCA Connectors
→ Outputs	3 Video, 1 Vpp/75Ω on BNC Connectors; 3 Audio Stereo, 1Vpp/150Ω on RCA Connectors
→ Max. Output Level	Video: 2Vpp; Audio: 5.4Vpp
→ Bandwidth (-3dB)	Video: 430MHz, Audio: 100kHz
→ Diff. Gain	0.04%

The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The VM-3AN takes one stereo input and distributes the signal to three id...

→ Input	1 balanced audio stereo on 5-pin terminal block
→ Outputs	3 balanced audio stereo on 5-pin terminal blocks
→ Max. Output Level	Audio: 18.5Vpp
→ Bandwidth (-3dB)	>100 kHz
→ S/N Ratio	90dB @1kHz

The VM-3SN is a high-performance distribution amplifier for s-Video (Y/C) signals. The VM 3SN takes one s-Video input and distributes the signal to three identical...

→ Input	1 composite video on a BNC connector
→ Outputs	3 composite video on BNC connectors
→ Max. Output Level	1.8Vpp
→ Bandwidth (-3dB)	135MHz
→ DIFF Gain	0.12%

The VM-3VN is a distribution amplifier for composite video signals. The VM-3VN takes one input, provides correct buffering and isolation and distributes the signal...

→ Input	1 Composite Video on A BNC Connector
→ Outputs	3 Composite Video on BNC Connectors
→ Max. Output Level	1.8Vpp
→ Bandwidth (-3dB)	430MHz
→ Diff Gain	0.12%

The VM−400HDCP is a distribution amplifier for DVI signals. It reclocks and equalizes the signal and distributes it to four identical outputs.

The Kramer VM-4DP is a high−quality distribution amplifier for DisplayPort signals.

The VM4 DPunit distributes one input signal to four identical ...

Input	1 DisplayPort connector.
Outputs	4 DisplayPort connectors.
Bandwidth	Supports up to 2.7Gbps bandwidth per lane, 10.8Gps total for all four lanes.
Compliance With Hdmi Standard	Supports DisplayPort 1.1a and HDCP 1.3.
Controls	EDID Select and Read buttons.

The Kramer VM-4HC is a distribution amplifier for HDMI signals.The VM 4HC reclocks and equalizes the signal and distributes it to four identical outputs.
 ...

INPUT	1 HDMI connector.
OUTPUTS	4 HDMI connectors.
BANDWIDTH	Supports up to 2.25Gbps bandwidth per graphic channel.
COMPLIANCE WITH HDMI STANDARD	HDMI and HDCP.
CONTROLS	SELECT and READ buttons for selecting and storing EDID information.

The VM-4HDCPxl is a high-performance distribution amplifier for DVI signals. The VM 4HDCPxl reclocks and equalizes one input signal and distributes it to four iden...

→ Input	1 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
→ Outputs	4 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Controls	EDID Select, EDID Read
→ Indicator LEDs	OUTPUT STATUS LEDs

The VM-4HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 4HDxl takes one input, provides reclocking and equalization and distributes...

→ Input	1 SMPTE-259M/292M/344M/424M serial video 75Ω on a BNC connector
→ Outputs	4 equalized and reclocked SMPTE-259M/292M/344M/424M outputs 75Ω on BNC
→ Maximum Data Rate	2.97Gbps
→ Max. Output Level	800mVpp/75Ω
→ Coupling	AC

The VM−4Hxl is a distribution amplifier for HDMI signals with resolutions up to and including WUXGA and 1080p. The unit reclocks and equalizes the signal and distributes it to fo...

→ Input	1 HDMI connector
→ Outputs	4 HDMI connectors
→ Bandwidth	Supports up to 2.25Gbps bandwidth per graphic channel
→ Max. Resolution	Up to WUXGA (1920x1200), 1080p
→ Compliance with HDMI Standard	Supports HDMI 1.3 and HDCP

The VM-50AN is a high-performance distribution amplifier for balanced and unbalanced stereo audio signals. The VM 50AN takes one balanced or unbalanced stereo inpu...

→ Inputs	1 balanced stereo audio, 4dBu/50kΩ on a detachable terminal block connector; 1 unbalanced stereo audio, 1Vpp/50kΩ on a 3.5mm mini jack. Balanced/Unbalanced input selection
→ Output	5 balanced stereo audio, 4dBu/50Ω on detachable terminal block connectors; 5 unbalanced stereo audio, 1Vpp/470Ω on 3.5mm mini jacks
→ Max. Output Level	>24dBm
→ Bandwidth (-3dB)	40kHz; fully loaded
→ S/N Ratio	84dB, unweighted

The VM-50CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. The VM 50CA takes one input of each...

→ Inputs	1 component video (Y, Pb/Cb, Pr/Cr); 1Vpp/0.7Vpp, 75Ω on 3 RCA connectors; 1 digital audio (S/PDIF) 75Ω on an RCA connector; 1 unbalanced stereo audio 50kΩ, 4dBu on 2 RCA connectors
→ Outputs	5 component video (Y, Pb/Cb, Pr/Cr) 1Vpp/0.7Vpp, 75Ω on 15 RCA connectors; 5 digital audio (S/PDIF) on 5 RCA connectors; 5 unbalanced stereo audio 150O, 4dBu on 10 RCA connectors
→ Max. Output Level	Video 2.3Vpp; Audio 1.8Vpp (S/PDIF); 22dBu (analog)
→ Bandwidth (-3dB)	Video 400MHz, Fully Loaded; Audio 350MHz (S/PDIF); 40kHz (analog)
→ Diff. Gain	0.08%

The VM-50HN is a high-performance distribution amplifier for headphone signals. The VM 50HN takes one stereo headphone input and distributes the signal to five ide...

→ Input	1 unbalanced stereo audio, 1Vpp/50kΩ on a 6.5mm phone jack
→ Outputs	5 unbalanced stereo audio, 500mW/8Ω on 6.5mm phone jacks
→ Audio Bandwidth (-3dB)	25kHz
→ Control	5 stereo output level controls (front), 1 mono switch (rear)
→ Gain Range	-60dB to 10dB

The VM-50V is a high-performance distribution amplifier for composite or SDI signals. The VM 50V takes one input, provides correct buffering and isolation, and dis...

→ Input	1 Video, Looping, 1Vpp/75Ω on BNC Connectors With A Termination Switch
→ Outputs	5 Video, 1Vpp/75Ω on BNC Connectors
→ Max. Video Output	2Vpp
→ Video Bandwidth (-3dB)	480MHz
→ Diff. Gain	0.05%

The VM-51 is a high-performance distribution amplifier for composite or SDI video signals. The VM 51 takes one input, provides correct buffering and isolation and ...

→ Input	1 Video, 1Vpp/75Ω on A BNC Connector
→ Outputs	5 Video, 1Vpp/75Ω on BNC Connectors
→ Max. Output Level	2.3Vpp/75Ω
→ Bandwidth (-3dB)	420MHz
→ Diff. Gain	0.05%

The VM-5ARII is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 5ARII provides controls to compens...

→ Inputs	1 Video, Composite or Single Component, Looping, 1Vpp/75Ω on BNC Connectors with Termination Switch; 1 Unbalanced Stereo Audio Looping, 4dB/50kΩ on RCA Connectors
→ Outputs	5 Video, Composite or Single Component, 1Vpp/75Ω on BNC Connectors; 5 Unbalanced Stereo Audio, 4dB/150Ω, 27Vpp Max. on RCA Connectors
→ Max. Output Level	Video 2.2Vpp; Audio 27Vpp
→ Video Bandwidth(-3dB)	360MHz
→ Audio Bandwidth(-3dB)	60kHz

The VM−5HDxln is a high−performance distribution amplifier for 3G HD−SDI signals. The unit takes one input, provides reclocking and equalization, and distributes the signal t...

The VM-5S is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 5S takes one input, provides correct ...

→ Input	1 Video AC/DC Coupled (Internal Jumper), Looping 1Vpp/75Ω on BNC Connectors with Rear Termination Switch; 1 Balanced Stereo/Mono Audio, Up to 21v/50kΩ on RCA Connectors
→ Outputs	5 Video, 1Vpp/75Ω on BNC Connectors; 5 Balanced Stereo/Mono Audio, Up to 21v/220Ω on RCA Connectors
→ Max. Video Output	1.7Vpp
→ Video Bandwidth (-3dB)	340MHz
→ Audio Bandwidth(-3dB)	20kHz

The VM-73 is a 5-input multi-format distribution amplifier for composite, s-Video (Y/C), component (YUV), computer graphics video and HDMI signals. The VM 73 is fi...

→ Inputs	1 Composite on A BNC Connector, 1 S-Video on A 4-Pin Connector, 1 Component (Y, Pb/Cb, Pr/Cr) on 3 RCA Connectors, 1 XGA on A 15-Pin Hd Connector, 1 Hdmi on an Hdmi Connector
→ Outputs	3 Composite on BNC Connectors, 3 S-Video on 4-Pin Connectors, 3 Component (Y, Pb/Cb, Pr/Cr) on 3 RCA Connectors Each, 3 XGA on 15-Pin Hd Connectors, 3 Hdmi on Hdmi Connectors
→ Output Level	1.8Vpp (Composite), 1.9Vpp (Y/C), 2.0Vpp (Component), 2.0Vpp (XGA)
→ Bandwidth (-3dB)	430MHz (Composite), 440MHz (Y/C), 430MHz (Component), 405MHz (XGA), 2.25gbps (Hdmi)
→ Diff. Gain	0.05% (Composite), 0.06% (Y/C),0.05% (Component), 0.05% (XGA)

The VM-80A is a high-performance distribution amplifier for balanced stereo audio signals. The VM 80A can also be configured as two 1: 4 DAs.
 

The VM-80V is a high-performance distribution amplifier for composite or SDI signals. The VM 80V can also be configured as a 1:4 DA for s-Video (Y/C) signals and h...

→ Inputs	2 Video: 1Vpp/75Ω on BNC Connectors With Termination Switches
→ Outputs	2x4 Video, 1Vpp/75Ω on BNC Connectors
→ Max. Output	2Vpp
→ Video Bandwidth (-3dB)	330MHz
→ Diff. Gain	0.12%

The VM8H is a distribution amplifier for HDMI signals. The VM 8H reclocks and equalizes the signal and distributes it to 8 identical outputs.
 

The VM-92 is a high-performance multimode distribution amplifier for composite, s- Video (Y/C), component (YUV), and RGBS video signals. The VM-92 can also be conf...

→ Inputs	9 Independent Channels 1vpp/75Ω on Bnc Connectors
→ Outputs	9x2 Independent Channels 1vpp/75Ω on Bnc Connectors; 9 Loops (1 Per Channel) 1vpp/75Ω on Bnc Connectors
→ Max. Output Level	3.3vpp
→ Bandwidth (-3db)	500mhz
→ Diff. Gain	0.03%