Search

ltc-4651-00.jpg
Bosch: ltc-4651-00

850NM FOM, TRANSMITTER/RECEIVER, BIPHASE OR RS-232 DATA

The Bosch LTC 4651/00 850NM FOM, TRANSMITTER/RECEIVER, BIPHASE OR RS-232 DATA, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant...

ltc-4671-00.jpg
Bosch: ltc-4671-00

850NM FOM, TRANSMITTER/RECEIVER, RS-485 DATA, USE WITH LTC 4637 SERIES RACK

The Bosch LTC 4671/00 850NM FOM, TRANSMITTER/RECEIVER, RS-485 DATA, USE WITH LTC 4637 SERIES RACK with Data communication link supports keyboards used with Allegiant Series of...

ltc-4744-00.jpg
Bosch: ltc-4744-00

1310NM FOM, TRANSMITTER, 4 CHANNEL, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK

The Bosch LTC 4744/00 1310NM FOM, TRANSMITTER, 4 CHANNEL, VIDEO SIGNALS, USE WITH LTC 4637 SERIES RACK with Video models support NTSC, PAL, and SECAM standards and Data...

15bt.jpg
Azden: 15bt

105 Series UHF Body-Pack Transmitter

The Azden 15BT Beltpack Transmitter is designed for use with their 105UPR receiver. The 15BT features 92 selectable frequencies and features a belt-clip and mini...

1t-ct-641.jpg
TV One: 1t-ct-641

Transmitter: HDMI ver1.4 and IR over Single Cat.5e/6

The TV One 1T-CT-641 HDMI Transmitter forms the HDMI over single CAT5e/CAT6 system when coupled with the 1T-CT-642 Receiver (sold separately). It supports the...

1t-ct-647.jpg
TV One: 1t-ct-647

7+1-Output Transmitter: HDMI ver1.4 and IR with 7 Cat 5e/6 Outputs + 1 HDMI

The Tv One 1T-CT-647 over Single Cat.5e/Cat.6 system consists of a seven port transmitter for use with 1T-CT-642 Receivers (each purchased separately) which employs HDMI v1.4...

1t-ct-653.jpg
TV One: 1t-ct-653

Transmitter: HDMI ver1.4a over Single Cat.5e/6. Uses HDBaseT 5Play technology

The Tv One 1T-CT-653/1T-CT-654A HDMI over Single Cat.5e/Cat.6 system consists of a 1T-CT-653 Transmitter coupled with a 1T-CT-654A Receiver (each purchased...

2000bt.jpg
Azden: 2000bt

UHF Transmitter for 2000 Series Receivers

The 2000BT UHF Body-Pack Transmitter (638.125 to 661.875 MHz) by Azden is designed to work with the 2000 Series wireless receivers. It is used in various environments, for audio...

Transmitter Type    F3E FM
Output Power    50mW
Oscillation    Crystal-controlled PLL Synthesizer
Tone Code Frequency    32.768 kHz
Noise Reduction    Proprietary Compander
35bt.jpg
Azden: 35bt

300 Series UHF Body Pack Transmitter

The Azden 35BT Wireless Beltpack Transmitter is intended for use with Azden's 305 series wireless systems. The 35BT beltpack transmitter includes the EX-503...

602r-t.jpg
Kramer: 602r-t

Detachable DVI Optical Transmitter & Receiver

The 602R/T are a small and lightweight fiber optic transmitter and receiver pair for DVI signals. The 602 T converts electrical signals to optical signals and the...

Inputs    DVI IN (602T), 2 LC optical connectors (602R)
Outputs    2 LC optical connectors (602T), DVI OUT (602R)
Resolution    Up to WUXGA @60Hz (1.65Gbps)
Power Source    5V DC, <500mA
Dimensions    3.9cm x 6.9cm x 1.5cm (1.5" x 2.83" x 0.75") W, D, H
610r-t.jpg
Kramer: 610r-t

Detachable DVI Optical Transmitter & Receiver

The 610R/T are a detachable optical transmitter and receiver for sending DVI signals with resolutions of up to 1920x1200 at 60Hz over LC optical cable. The 610 T...

Input    DVI IN (610T), 4 LC optical connectors (610R)
Output    4 LC optical connectors (610T), DVI OUT (610R)
Resolution    Up to WUXGA @60Hz (1.65Gbps)
Humidity    Operating: 5% to 65%; Storage 5% to 95%
Power Source    5V DC, <500mA
611t.jpg
Kramer: 611t

Composite Video Optical Transmitter

The 611-T is a high-performance fiber optic transmitter for composite video signals. The 611 T transmitter converts a composite video signal into a fiber optic...

Input    Composite video, 1Vpp/75Ω on a BNC connector
Output    Fiber optic ST connector, G62.5/125um (recommended) or G50/125um multimode fiber optic cable
Operation Distance    Up to 5km (multimode)
Video Bandwidth (-3dB)    55MHz
Diff. Gain    0.4%
613r-t.jpg
Kramer: 613r-t

3G HD-SDI Mini Optical Receiver & Transmitter

The 613R/T is a receiver/transmitter pair for digital video signals up to 3G HD-SDI. The 613R/T pair consists of two compunents; the 613T...

Inputs    SDI, HD-SDI, 3G HD-SDI on a 75Ω BNC connector (613T); 1 fiber optic ST connector (613R)
Outputs    1 fiber optic ST connector (613T); SDI, HD-SDI, 3G HD-SDI on a 75Ω BNC connector (613R)
Maximum Data Rate    Up to 3Gbps
Maximum Range    30km (18.6 Miles) @1080p, 3G-SDI format
Format    SMPTE 424M (3G-SDI); SMPTE 292M (HD-SDI); SMPTE 259M (SD-SDI, SDI, DVB-ASI)
614r-t.jpg
Kramer: 614r-t

DVI Optical Trans & Receiver

The 614T and 614R are a small and lightweight, detachable optical transmitter and receiver pair. They transmit uncompressed DVI resolutions of up to 1920x1200 at...

616r-t.jpg
Kramer: 616r-t

DVI Optical Trans & Receiver

The 616T and 616R are a small and lightweight, detachable fiber optic transmitter and receiver pair. They transmit uncompressed resolutions of up to WQXGA...

621t.jpg
Kramer: 621t

DVI Optical Transmitter

The 621T is an optical transmitter for DVI signals up to 1920x1200 at 60Hz. The 621T converts a DVI signal into an optical signal and the 621R converts the...

Input    DVI-D on a DVI-I connector
Output    4 LC optical connectors for R, G, B & Clock. 1 CAT 5 (RJ-45) for DDC and HDCP bidirectional data
Bandwidth    1.65Gbps
Power Source    12V DC, 500mA
Dimensions    12cm x 8.05cm x 2.75cm (4.72" x 3.17" x 1.08") W, D, H
622t.jpg
Kramer: 622t

Dual Link DVI Optical Transmitter

The 622T and 622R are optical transmitter and receivers for dual link DVI signals with resolutions up to 2560x1600 at 60Hz. The 622T converts a DVI signal into an...

Input    DVI-D on a DVI-I connector
Output    8 simplex (or 4 duplex) LC optical connectors, 2 red, 2 green, 2 blue & 2 clock; 1 CAT 5 (RJ-45) for DDC and HDCP bi-directional data
Bandwidth    3.3Gbps
Power Source    12V DC, 200mA
Dimensions    21.4cm x 10.35cm x 4.36cm (8.4" x 4.07" x 1.71") W, D, H
650t.jpg
Kramer: 650t

DVI Over Coax Transmitter

The 650T is a high-performance transmitter for DVI, RS-232 and IR signals. The 650T converts the input signals to five coax signals and the 650R converts them...

Inputs    1 DVI connector
Outputs    5 BNC connectors
Ports    IR on 3.5mm mini jack, RS-232 on 9-pin D-sub connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Power Source    12V DC, 330mA
670t.jpg
Kramer: 670t

HDMI Over Fiber Optic Transmitter

The 670T is a high-performance fiber optic transmitter for HDMI signals. The 670T converts an HDMI signal to light pulses that it transmits over one single fiber...

Inputs    HDMI connector
Outputs    1 optical connector
Bandwidth    Supports up to 3.5Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3, using fiber optic communication links and DDC2B
Extension Limit    1700m (>5570 feet) for 1080p/60Hz
671t.jpg
Kramer: 671t

DVI Over Fiber Optic Transmitter

The 671T is a high-performance fiber optic transmitter for DVI signals. The 671T converts a DVI signal to light pulses that are transmitted over one single fiber...

Inputs    DVI connector
Outputs    Optical connector
Data Rate    Up to 1.65Gbps
Extension Limit    2000m (>6560 feet) for UXGA (1600x1200) and 1080p
Fiber-Optic Connection    SC connectors for multimode (OM3) fiber cable
673r-t.jpg
Kramer: 673r-t

4-Channel 3G HD-SDI Over Single Fiber Optic Transmitter & Receiver

The 673RT are a high-performance fiber optic transmitter and receiver pair for video signals up to 3G HD-SDI and dual link HD-SDI signals. The 673R/T duo consists...

Inputs    3G HD-SDI/HD-SDI/Dual-link SDI serial video, 75Ω on BNC connectors (673T); 1 optical connector (673R)
Outputs    1 optical connector (673T); 3G HD-SDI/HD-SDI/Dual-link SDI serial video, 75Ω on BNC connectors (673R)
Bandwidth    Up to 3Gbps for each SDI input
Fiber Optic Extension    Up to 1000m (>3200ft) for 3G HD-SDI
Input Cable Equalization (673T)    140m for HD-SDI, 120m for 3G HD-SDI
690t.jpg
Kramer: 690t

3G HD→ˆ’SDI Fiber Transmitter

The 690T is a high→ˆ’performance fiber optic transmitter for SDI video signals up to 3G HD→ˆ’SDI. The 690T converts two 3G HD→ˆ’SDI signals to...

705xl.jpg
Kramer: 705xl

Composite Video Over Twisted Pair Branching Transmitter

The 705xl is a twisted pair transmitter for composite video signals. The 705xl converts a composite video signal to two twisted pair signals and the 706xl...

Input    1 composite video 1Vpp/75Ω on a BNC connector; 1 loop 1Vpp/75Ω on a BNC connector
Output    2 twisted pair outputs on terminal block connectors
Bandwidth (-3dB)    108MHz (-3dB)
Diff. Gain (PAIR)    0.08%
Diff. Phase (PAIR)    0.07Deg
711n.jpg
Kramer: 711n

Composite Video & Stereo Audio Over Twisted Pair Transmitter

The 711-N is a twisted pair transmitter for composite video and unbalanced stereo audio signals. The 711 N transmitter converts composite video and stereo audio...

Input    1 composite video 1Vpp/75Ω, on a BNC connector; 1 stereo unbalanced audio 4dBu/50kΩ, on two RCA connectors
Output    1 RJ-45 CAT 5 shielded connector (LINE OUT)
Video Max. Signal Level    2.8Vpp
Audio Max. Signal Level    7.6Vpp
Video Bandwidth (-3dB)    85MHz
717.jpg
Kramer: 717

1 BNC M/M Cable 15'

The 717 is a twisted pair (TP) transmitter for composite video and unbalanced stereo audio signals. The unit converts composite video and stereo audio signals into a twisted pair...

d-ttp111vex.jpg
I3 International: d-ttp111vex

UTP Video Balun Transmitter BNC to Screw Terminals 10Pkg

The i3 International D-TTP111VEX UTP Video Balun Only Transmitter - Package of 10 with BNC to screw

dm-tx-100.jpg
Crestron: dm-tx-100

DigitalMedia CAT Transmitter 100

The DM-TX-100 is a DM® CAT transmitter that provides a single HDMI® input for a computer or high-definition AV source as part of a complete Crestron® DigitalMedia→„¢...

dm-tx-200-c-2g.jpg
Crestron: dm-tx-200-c-2g

Wall Plate DigitalMedia 8G+ Transmitter 200

The DM-TX-200-C-2G installs in a double-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron®...

dm-tx-201-c.jpg
Crestron: dm-tx-201-c

DigitalMedia 8G+ Transmitter 201

The DM-TX-201-C provides a simple interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia→„¢ system. Its low-profile,...

dm-tx-201-s.jpg
Crestron: dm-tx-201-s

DigitalMedia 8G Fiber Transmitter 201

The DM-TX-201-S provides a simple interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia→„¢ system. Its low-profile,...

dm-tx-201-s2.jpg
Crestron: dm-tx-201-s2

DigitalMedia 8G Single-Mode Fiber Transmitter 201

The DM-TX-201-S provides a simple interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia→„¢ system. Its low-profile,...

dm-tx-401-c.jpg
Crestron: dm-tx-401-c

DigitalMedia 8G+ Transmitter 401

The DM-TX-401-C provides a versatile, rack-mountable[1] interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia→„¢ system. It...

dm-tx-401-s.jpg
Crestron: dm-tx-401-s

DigitalMedia 8G Fiber Transmitter 401

The DM-TX-401-S provides a versatile, rack-mountable[1] interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia→„¢ system. It...

dm-tx-401-s2.jpg
Crestron: dm-tx-401-s2

DigitalMedia 8G Single-Mode Fiber Transmitter 401

The DM-TX-401-S2 provides a versatile, rack-mountable[1] interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia→„¢ system. It...

dm-tx-4k-100-c-1g.jpg
Crestron: dm-tx-4k-100-c-1g

Wall Plate 4K DigitalMedia 8G+® Transmitter 100

The DM-TX-4K-100-C-1G provides a simple, cost-effective interface solution for a single HDMI, DVI, or Dual-Mode DisplayPort source as part of a complete Crestron®...

dm-txrx-100-str.jpg
Crestron: dm-txrx-100-str

HD Streaming Transmitter/Receiver

The Crestron® DM-TXRX-100-STR is a compact H.264 streaming encoder/decoder designed to enable the distribution of high-definition AV signals over an IP network. Configurable as...

dvi-1fo-s.jpg
TV One: dvi-1fo-s

DVI Transmitter over Fiber for Modular Matrix

The Tv One DVI-1FO-S DVI Sender over 1 FO Receives the DVI signal and extends it up to 6600 feet (2000 meters) using 50µ OM3e/OM4 multi-mode fiber optic...

dvi-elrpol-s.jpg
TV One: dvi-elrpol-s

DVI Transmitter over CAT-5 for Modular Matrix

The Tv One DVI-ELRPOL-S DVI ELR Sender with POL Extends DVI up to 330 feet (100 meters). It is powered by the MOD-8ELRPOL-R Input Card using POL (Power Over Line)...

dvirs232-1fo-s.jpg
TV One: dvirs232-1fo-s

DVI and RS-232 Transmitter over Fiber for Modular Matrix

The Tv One DVIRS232-1FO-S DVI-RS232 Sender over 1 FO Receives the DVI signal and extends it up to 6600 feet (2000 meters) using 50μ OM3e/OM4 multi-mode fiber...

dvirs232-elrpol-s.jpg
TV One: dvirs232-elrpol-s

DVI and RS-232 Transmitter over CAT-5 for Modular Matrix

The Tv One DVIRS232-ELRPOL-S DVI-RS232 ELR Sender with POL Extends DVI up to 330 feet (100 meters). It is powered by the MOD-8ELRPOL-R Input Card using POL (Power...

el1500c.jpg
Nitek: el1500c

TCP/IP Transmission Over Coax W/POE - Up To 1,640 Feet (Transmitter & Receiver)

The Nitek IP & PoE Over Coax Extender EL1500C IP video over Coax network extender-PoE Inserter (EtherStretch) system includes both the transmitter and receiver units. The System...

Unit    Transceiver
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
el1500u.jpg
Nitek: el1500u

TCP/IP Transmission Over UTP W/POE - Up To 1,960 Feet (Transmitter & Receiver)

The Nitek Ethernet & PoE Extender EL1500U IP ethernet network extender-PoE Inserter (EtherStretch) can quickly turn any ordinary 4 pair category network cable into a high speed...

Unit    Transceiver
Size    1.1"H x 1.6"W x 3.6"D
el4500c.jpg
Nitek: el4500c

IP Cameras Over Coax Extender

The EL4500C is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable...

et1500c.jpg
Nitek: et1500c

IP & PoE Over Coax Extender - Transmitter Unit

The Nitek IP & PoE Over Coax Extender - Transmitter Unit ET1500 C is a transmitter that extends Ethernet and PoE for distances up to 500 meters (1,640 ft.) over coaxial cable....

Unit    Transceiver
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
et1500uw.jpg
Nitek: et1500cw

IP & PoE Over Coax Extender - Weatherproof Transmitter
The Nitek IP & PoE Over Coax Extender Weatherproof Transmitter Unit ET 1500CW Outdoor Rated IP Cameras over Coaxial Cable network extender and PoE Injector is a transmitter that...
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
LED Indicators    Link Status, Power, PoE Out, 10Mb or 100mb
et1500cws.jpg
Nitek: et1500cws

Etherstretch™ Ethernet Over Coax Extender Weatherproof Transmitter Unit & Surge Suppressor
The Nitek Etherstretch™ ET1500CWS Outdoor Ethernet over Coax network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK....
Receiver Unit Size    1.1"H x 1.6"W x 5.1"D
Enclosure Size    2.165"H x 5.74"W x 9.92"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] Coaxial BNC Connector
et1500u.jpg
Nitek: et1500u

IP & PoE Network Extender - Transmitter

The Nitek IP & PoE Network Extender - Transmitter Unit ET1500U IP Cameras network extender and PoE Injector is a transmitter unit that extends Ethernet and PoE for distances up to...

Unit    Transmitter
Size    1.1"H x 1.6"W x 4.93"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
et1500uw.jpg
Nitek: et1500uw

IP & PoE Network Extender - Weatherproof Transmitter
The Nitek IP & PoE Network Extender - Weatherproof Transmitter Unit ET1500UW is a transmitter that extends Ethernet and PoE for distances up to 600 meters (1,960 ft.) over standard...
Unit    Transmitter
Size    7.125"H x 4.77"W x 2.23"D
Power Requirements    PoE or PS48 Power Supply (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 / 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
et1500uws.jpg
Nitek: et1500uws

Etherstretch™ IP Cameras Over UTP Extender Weatherproof Transmitter & Surge Suppressor
The Nitek Etherstretch™ ET1500UWS Outdoor IP camera network extender-PoE Inserter with Surge Suppression is another of the IP Video Transmission Solutions from NITEK. The...
Receiver Unit Size    1.1"H x 1.6"W x 5.1"D
Enclosure Size    2.165"H x 5.74"W x 9.92"D
Power Requirements    PoE or IP1054 PoE Inserter (48vdc @ 15.4watts)
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 Port
et1551u.jpg
Nitek: et1551u

IP Video 2 Wire Network Extender: Transmitter Unit

The Nitek ET1551U transmitter unit is another component of the NITEK cutting edge EtherStretch→„¢ line. The ET1551U solution allows for the utilization of...

Size    1.1"H x 1.6"W x 4.6"D (including tabs)
Power Requirements    PoE (IEEE 802.3af or at) or PS48 Power Supply
Ethernet Connection    [1] Auto Configuring 10 ⁄ 100 RJ45 port
EtherStretch Link Connection    [1] RJ45 port
LED Indicators    Link Status, Power, PoE Out, 10Mb or 100mb
et4500c.jpg
Nitek: et4500c

IP Cameras Over Coax Extender

The ET4500C is another component of the NITEK cutting edge EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of existing cable...

f110.jpg
Kramer: f-110

VGA Line Transmitter

The F→ˆ’110 is a wall plate insert transmitter for computer graphics video signals with resolutions up to and exceeding UXGA. It converts a computer graphics video signal...

fsfp.jpg
Pelco: fsfp

FSFP Series Transceivers; Interchangeable Small Form-Factor Pluggable Modules

The Pelco FSFP Series transceivers are MSA-compliant, small form-factor pluggable (FSFP) modules that allow for an optical or copper interface when using a Pelco...

ftd1-frd1.jpg
Pelco: ftd1-frd1

FTD1/FRD1 Fiber Transmitter and Receiver Single Channel Bidirectional Data

The FTD1/FRD1 fiber transmitter and receiver provide transmission of bidirectional data over one optical fiber. The FTD1 transmitter and FRD1...

ftd4-frd4.jpg
Pelco: ftd4-frd4

Fiber Transmitter and Receiver with 4 channel Bidirectional data

The FTD4/FRD4 fiber transmitter and receiver provide transmission of four bidirectional data channels over one optical fiber in a two-slot wide design. The FTD4...

fts311000s00.jpg
Nitek: fts311000s00

Single Channel Stand Alone Video Only Transmitter

Nitek's FTS311000S00 is a single fiber per channel Universal-Mode→„¢ video transmitter. Nitek's unique Universal-Mode→„¢ optics allow the same unit to be used with...

fts312104s00.jpg
Nitek: fts312104s00

Single Channel Stand Alone Video & Data Transmitter

Nitek's FTS312104S00 is a single fiber channel Universal-Mode→„¢ video and data transmitter in which both video and data are transmitted over the same fiber. Nitek's unique...

fts324104r00.jpg
Nitek: fts324104r00

Dual Channel Rack Mount Video & Data Transmitte

Nitek's FTS324104R00 is a two channel video and data, Universal-Mode→„¢ transmitter. The system requires a single fiber per channel. Both video and data are transmitted over...

fts324104s00.jpg
Nitek: fts324104s00

Dual Channel Stand Alone Video & Data Transmitter

Nitek's FTS324104S00 is a two channel video and data, Universal-Mode→„¢ transmitter. The system requires a single fiber per channel. Both video and data are transmitted over...

fts344000r00.jpg
Nitek: fts344000r00

Four Channel Rack Mount Video Only Transmitter

Nitek's FTS344000R00 is a four channel video only Universal-Mode→„¢ transmitter. The system requires a single fiber per channel. Nitek's unique Universal-Mode→„¢...

fts344000s00.jpg
Nitek: fts344000s00

Four Channel Stand Alone Video Only Transmitter

Nitek's FTS344000S00 is a four channel video only Universal-Mode→„¢ transmitter. The system requires a single fiber per channel. Nitek's unique Universal-Mode→„¢...

fts541000s00.jpg
Nitek: fts541000s00

Four Channel Stand Alone Video Only Transmitter

Nitek's FTS541000S00 is a four channel Universal-Mode→„¢ video transmitter. Nitek's unique Universal-Mode→„¢ optics allow the same unit to be used with 1 single-mode...

fts541100s00.jpg
Nitek: fts541100s00

Four Channel Stand Alone Video & Data Transmitter

Nitek's FTS541100S00 is a four channel Universal-Mode→„¢ video transmitter. Nitek's unique Universal-Mode→„¢ optics allow the same unit to be used with 1 single-mode...

fts541110s00.jpg
Nitek: fts541110s00

Four Channel Stand Alone Video, Data & Ethernet Transmitter

Nitek's FTS541110S00 is a four channel Universal-Mode→„¢ video transmitter. Nitek's unique Universal-Mode→„¢ optics allow the same unit to be used with 1 single-mode...

fts581000s00.jpg
Nitek: fts581000s00

Eight Channel Stand Alone Video Only Transmitter

Nitek's FRTS581000S00 is an eight channel Universal-Mode→„¢ video transmitter, which allows the same unit to be used with 1 single-mode or multi-mode fiber optic cabling...

fts581100s00.jpg
Nitek: fts581100s00

Eight Channel Stand Alone Video & Data Transmitter

Nitek's FTS581100S00 is an eight channel Universal-Mode→„¢ video Transmitter. Nitek's unique Universal-Mode→„¢ optics allow the same unit to be used with 1 single-mode...

fts581110s00.jpg
Nitek: fts581110s00

Eight Channel Stand Alone Video, Data & Ethernet Transmitter

Nitek's FTS581110S00 is an eight channel Universal-Mode→„¢ video transmitter. Nitek's unique Universal-Mode→„¢ optics allow the same unit to be used with 1 single-mode...

h187.jpg
Lectrosonics: h187

VHF Plug-on Transmitter

The Lectrosonics H187 plug-on transmitter adapts microphones with XLR connectors to wireless operation. The spring-loaded, rotating input coupler is easy to operate, yet provides...

ifbt4.jpg
Lectrosonics: ifbt4

Frequency-Agile IFB Transmitter

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are...

irc-22.jpg
Azden: irc-22

Tabletop Microphone/Transmitter

The Azden IRC-22 Two-Channel Tabletop Microphone/Transmitter features a wireless transmitter that uses InfraRed technology, which is ideal for class and conference rooms. This is...

irh-15c.jpg
Azden: irh-15c

Two-channel IR handheld microphone/transmitter

The Azden IRH-15C Wireless Handheld Infrared Transmitter is designed for use with IR-CS Infrared classroom system. The microphone operates on two AA alkaline or rechargeable...

irn-20.jpg
Azden: irn-20

Pendant Transmitter

The Azden IRN-20 Pendant Transmitter is a palm-sized, neck-worn microphone and IR (Infrared) emitter pendant for use with Azden IR receivers such...

irn-30.jpg
Azden: irn-30

Mini handheld microphone/transmitter for use with IRR-40P and IRR-50P receivers

The Azden IRN-30 Transmitter is a handheld IR (Infrared) emitter for use with Azden IR receivers such as the IRR-40P. The IRN-30 is an ideal choice for wireless...

irt-10.jpg
Azden: irt-10

Desktop Audio Transmitter for MP3

The Azden IRT-10 Desktop Audio Transmitter works with MP3 and many other audio players, including the IRR-50p receiver

kw11.jpg
Kramer: kw-11

Wireless HDMI Trans/Receiver

The KW→ˆ’11T and KW→ˆ’11R is a high→ˆ’definition, wireless, HDMI transmitter and receiver combination for indoor use over short range distances....

lectrocsonics lma.jpg
Lectrosonics: lectrosonics-lma

Digital Hybrid UHF Belt Pack Transmitter

The LECTROCSONICS LMA combines an excellent feature set with superb performance in a classic Lectrosonics wireless belt-pack transmitter at a modest cost. 24-bit digital audio is...

lectrosonics d4t.jpg
Lectrosonics: lectrosonics-d4t

Digital 4-Channel Wireless Transmitter

The LECTROSONICS D4T digital 4-channel wireless system was designed as a special purpose system for location production in film and television.

A typical application for...

lectrosonics hh.jpg
Lectrosonics: lectrosonics-hh

Digital Hybrid Wireless Handheld Transmitter

The Lectrosonics HH Digital Hybrid Wireless handheld transmitter represents an elegant solution for a variety of wireless microphone applications including live performance,...

lectrosonics hm.jpg
Lectrosonics: lectrosonics-hm

Digital Hybrid® UHF plug-on transmitter

The LECTROSONICS HM Digital Hybrid® UHF plug-on transmitter features a DSP-based design that allows the transmitter to operate in its native Digital Hybrid Wireless® mode,...

lectrosonics lmb.jpg
Lectrosonics: lectrosonics-lmb

Economical beltpack transmitters

The LECTROSONICS LMB is the latest successor in Lectrosonics→€™ line of economical beltpack transmitters designed for applications including theater, house of worship, TV,...

lectrosonics lt.jpg
Lectrosonics: lectrosonics-lt

Transmitter features 25 or 100 kHz tuning steps (yielding up to 3,072 selectable frequencies)

The LECTROSONICS LT transmitter features 25 or 100 kHz tuning steps (yielding up to 3,072 selectable frequencies), an integrated multi-function switch with menu-selectable modes...

lectrosonics m175.jpg
Lectrosonics: lectrosonics-m175

VHF Belt-Pack Transmitter

The LECTROSONICS M175 5 sets a new standard for mechanical design. Every external part on the transmitter is machined aluminum—including the battery door and belt-clip. The...

lectrosonics smv.jpg
Lectrosonics: lectrosonics-smv

Super Miniature Wireless Microphone Transmitter

The Lectrosonics SMV Super Miniature Wireless Microphone Transmitter incorporates Lectrosonics patented Digital Hybrid Wireless technology, in a package no bigger than a pager....

SMV    50, 100mW
SMQV    50, 100, 250mW
mm400c.jpg
Lectrosonics: mm400c

TRANS, MINI, WATER-TIGHT, WITH MICROPHONE

The rugged, water resistant Lectrosonics MM400C is based on Digital Hybrid Wireless™ technology, a revolutionary new design that combines 24-bit digital audio with an analog FM...

nv-226j-pv.jpg
NVT: nv-226j-pv

UTP Video Passive Transmitter 12VDC Converter

The NVT UTP Video Passive Transmitter 12VDC Converter NV-226J-PV Video Transmitter 12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC...

Video Common-mode / Differential-mode rejection    50 KHz to 10 MHz 60 dB typ
Video Impedance Coax, male BNC    75 ohms
Video Impedance UTP, RJ45 Data Connector    100 ohms
Camera Input voltage    13 to 30 VAC/DC
Camera Input current    Class II SELV floating power supply
nv-653t.jpg
NVT: nv-653t

Video Active Transmitter

The NVT Video Active Transmitter NV-653T Video Transmitter is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile...

Video Frequency response    DC to 10 MHz
Video Equalization    0.5 dB typ
Video Automatic    (no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection    15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC    75 ohms
nv-et1801.jpg
NVT: nv-et1801

TBus Single Port PoE+ Transmitter

The NVT Model NV-ET1801 TBus PoE+ Transmitter is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded...

nv-et1804.jpg
NVT: nv-et1804

TBus Four Port PoE+ Transmitter

The NVT Model NV-ET1804 TBus PoE+ Transmitter is a compact bus-architected media converter that delivers 10/100 BaseT Ethernet and PoE+ power via coax, UTP or 2-Wire or Shielded...

pst-170.jpg
Electro Voice: pst-170

Portable Assistive Listening System Beltpack Transmitter

The Electro Voice Telex PST-170 is a portable assistive listening and personal monitoring belt pack transmitter using 17 VHF channels with frequencies in the 72-76 MHz band. It is...

pt-110-od.jpg
Kramer: pt-110-od

Computer Graphics Video Over Twisted Pair Transmitter With EDID & EMP Protection

The PT110-od is a twisted pair transmitter for computer graphics video signals. The PT 110-od converts a computer graphics signal into a twisted pair signal that...

Input    1 VGA/UXGA on a 15-pin HD connector
Output    1 RJ-45 LINE OUTPUT connector
Resolution    WUXGA & 1080p
S/N Ratio    69dB (worst case)
Coupling    AC
pt-110edid.jpg
Kramer: pt-110edid

Computer Graphics Video Over Twisted Pair Transmitter With EDID

The PT110EDID is a twisted pair transmitter for computer graphics video signals. PT 110EDID converts a computer graphics signal into a twisted pair signal that is...

Input    1 VGA/UXGA on a 15-pin HD connector
Output    1 RJ-45 LINE OUTPUT connector
Resolution    WUXGA & 1080p
S/N Ratio    69dB (worst case)
Coupling    AC
pt-571.jpg
Kramer: pt-571

HDMI Over Twisted Pair Transmitter

The PT571 is a twisted pair transmitter for HDMI signals. The PT 571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted...

Inputs    1 HDMI connector
Outputs    1 RJ-45 connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3 and HDCP
Power Source    12V DC, 250mA (transmitter and receiver together)
pt-571hdcp.jpg
Kramer: pt-571hdcp

DVI Over Twisted Pair Transmitter

The PT571HDCP is a twisted-pair transmitter for DVI signals. The PT 571HDCP converts the DVI to twisted pair signal and the PT-572HDCP converts the twisted pair...

Inputs    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector
Outputs    1 CAT 5 OUT on an RJ-45 connector
Bandwidth    Up to 1.65Gbps; WUXGA, 1920x1080p
Power Source    12V DC, 250mA (transmitter and receiver together)
Dimensions    6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
s4.4-btx g5 q.jpg
TOA: s4-4-btx-g5-q

S4 Series Bodypack Transmitter G5 Band

The Toa Electronics S4.4-BTX G5 Q Trantec S4.4 Series BTX-G5 Q UHF Wireless Beltpack Transmitter (Channel G5) with 3.5mm Microphone Input Connector, has a Detachable Antenna, and...

s4200.jpg
Verint: s4200

Outdoor Multi-band 2.4/5GHz Transmitter with integrated 8.5 dBi, 2.4 GHz antenna and 12 dBi, 5 GHz antenna (12V DC/24V AC)

The Verint Nextiva S4200 wireless video encoder/transmitter captures images from virtually anywhere with high reliability, excellent imagery, and lower operational costs. The...

sk100g3.jpg
Sennheiser: sk-100-g3

Wireless Stereo Transmitter
The wireless body-pack standard gets even better. Sennheiser has packed many useful features in the 158g weight of the SK-100-G3. The SK100G3 has an easy-to-read...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680 (max. 20 Presets)
Switching bandwidth    42 MHz
Peak deviation    ®48 kHz
Compander    HDX
sk2000.jpg
Sennheiser: sk-2000

Bodypack Transmitter With Enhanced AF Frequency Response
This lightweight yet extremely rugged bodypack transmitter is a delight for both the musician and the audience. With an AF frequency response of 25 to 20,000 Hz, it transmits even the sound of a bass...
sk2020dus.jpg
Sennheiser: sk-2020-d-us

Bodypack Transmitter
The Sennheiser TourGuide transmitter SK-2020-D-US will allow you to deliver a highly professional guided tour. Combining the bodypack transmitter with an headworn or clip-on...
Dimensions    3.3 x 2.5 x 0.9 in. (82 x 64 x 24 mm)
Frequency response (microphone)    100 - 7,000 Hz
Input voltage range    2 Vrms (at -24 dB line sensitivity)
Input voltage range    650 mVrms (at -36 dB mic. sensitivity)
Modulation    2 FSK
sk300g3.jpg
Sennheiser: sk-300-g3

Wireless Speaker Transmitter
While it is ready for operation right out of the box, the Sennheiser SK-300-G3 easily receives settings from the receiver via its enhanced wireless sync function. This...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680 (max. 20 Presets)
Switching bandwidth    42 MHz
Peak deviation    ®48 kHz
Compander    HDX
sk500g3.jpg
Sennheiser: sk-500-g3

Professional Wireless Audio Transmitter
The Sennheiser SK-500-G3 has more usable systems per range. As the pros have known for years, having the option of lowering a transmitters RF output power helps immensely when...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680 (max. 20 Presets)
Switching bandwidth    42 MHz
Peak deviation    ®48 kHz
Compander    HDX
skm2000.jpg
Sennheiser: skm-2000-xp

Professional Handheld Transmitter - Condenser Microphone
It's all in the design. The hand-held transmitter of the Sennheiser SKM2000XP shows its strength: during use, in its performance, in its features. Sennheiser's technical know-how is...
Modulation    FM
RF frequency range    516 - 865 MHz
Carrier Frequency    max. 3,000
Presets    max. 64
Switching bandwidth    max. 75 MHz
skm2020dus.jpg
Sennheiser: skm-2020-d-us

Digital Handheld Transmitter
The Sennheiser sturdy, reliable SKM2020DUS handheld transmitter may be the easiest way to address your audience. Should a participant have a question, simply hand the microphone to...
Frequency response (microphone)    100 - 7,000 Hz
Modulation    2-FSK
Number of channels    6
Operating temperature    0 - 50 °C
Operating time (Accupack)    8 h.
skp100g3.jpg
Sennheiser: skp-100-g3

Wireless Plug-on Transmitter For Wired Dynamic Microphones
The Sennheiser SKP-100-G3 adapts G3 wireless technology to a wired world. Imagine taking a wired microphone and turning it into a wireless simply by plugging in the...
RF frequency range    516 - 865 MHz
Transmission/receiving frequencies    1680 (max. 20 Presets)
Switching bandwidth    42 MHz
Peak deviation    ®48 kHz
Compander    HDX
skp2000.jpg
Sennheiser: skp-2000-xp

Plug-on Microphone Transmitter - Wired / Wireless
Practically any wired microphone can be a player in the Sennheiser SKP 2000 XP ensemble. This plug-on transmitter makes it possible. Five frequency ranges with up to 75 MHz switching...
Modulation    FM
RF frequency range    516 - 865 MHz
Carrier Frequency    max. 3,000
Switching bandwidth    max. 75 MHz
RF output power    100 mW
sr2020dus.jpg
Sennheiser: sr-2020-d-us

Rack-mountable Transmitter
The Sennheiser SR-2020-D-US rack-mountable transmitter (926 - 928 MHz), single channel with up to eight selectable channels. The SR 2020 D US includes NT2-1-US power...
Current consumption    max 300 mA
Dimensions    8.3 x 5.7 x 1.5 in. (212 x 145 x 38 mm)
Input voltage range    2 V max. (Line), 100 mV max. (Mic)
Modulation    2-FSK
Number of channels    6 / 8
sr2000xpiem.jpg
Sennheiser: sr-2050-xp-iem

Dual Wireless Monitoring Transmitter - Dual Audio Sound Transmitter
The Sennheiser SR 2050 XP IEM aside from being designed as a twin transmitter, SR 2050 is identical to SR 2000, and like its single counterpart, it is also network compatible. In...
Modulation    FM, MPX-Stereo
RF frequency range    516 - 865 MHz
Carrier Frequency    max. 3,000
Presets    max. 32
Switching bandwidth    max. 75 MHz
sr300iemg3.jpg
Sennheiser: sr-300-iem-g3

Stereo Transmitter With Equalizer For Wireless Monitoring
You can only sound better if you hear yourself better. Wireless monitoring is taken to the next level of perfection with the Sennheiser SR300IEMG3 monitoring system. Added features...
Modulation    FM, MPX-Stereo
RF Output Power    10/30 mW switchable
RF frequency range    516 - 865 MHz
Switching bandwidth    42 MHz
Transmission/receiving frequencies    1680
st-300.jpg
Electro Voice: st-300

VHF Wireless Personal Listening System Transmitter

The Electro Voice Telex ST-300 is a personal and assistive listening wireless base transmitter, featuring 17 user selectable frequencies in the VHF band. The unit is equipped with...

szi1029.jpg
Sennheiser: szi-1029

Infrared Conference Equipment Large Area Emitter
The Sennheiser SZI-1029 is a high-powered infrared emitter for wideband or narrow-band signals from an IR modulator. The SZI1029 covers up to 12,500 sq. ft. in...
Current consumption    350 mA / Stand-by 50 mA
Effective radiated power    5 W
Impedance    5 kΩ
IR diodes    132 GaAlAs
Max. coverage area    8.611 sq. ft. (800 m®)
szi30.jpg
Sennheiser: szi-30

Infrared Conference Equipment IR Radiator
The SI 20 is a small- to medium-area transmitter, which can be connected to audio components via an 1/8" or 1/4" plug. It has the ability to switch transmitting frequencies from 95 kHz to 250 kHz or...
Carrier frequency    6 MHz
Current consumption    150 mA
Dimensions    4.6 x 1 x 3.5 in. (118 x 25 x 90 mm)
Effective radiated power    0.5 W
IR diodes    11
tp-100axr.jpg
Kramer: tp-100axr

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-100AXR is a twisted pair transmitter for computer graphics video and unbalanced stereo signals. The TP 100AXR converts the input signals into a twisted...

Inputs    1 VGA on a 15-pin HD connector, 1 analog audio on a 3.5mm mini jack
Outputs    2 RJ-45 OUT connectors, 1 VGA loop on a 15-pin HD connector, 1 analog audio loop out on a 3.5mm mini jack
Resolution    Up WUXGA & 1080p
Bandwidth (-3dB)     20kHz
S/N Ratio    Video: 60dB; Audio: <89dB
tp-102hd.jpg
Kramer: tp-102hd

Computer Graphics Video & HDTV Over Twisted Pair Transmitter

The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 102HD converts a computer graphics video or HDTV signal on a...

Input    1 XGA/HD on a 15-pin HD (F) connector
Outputs    2 RJ-45 connectors
Max. Output Level    1.7Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.75%
tp-104hd.jpg
Kramer: tp-104hd

1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-104HD is a twisted pair transmitter for computer graphics signals. The TP 104HD converts a computer graphics video signal into four twisted pair...

Input    1 VGA/UXGA on a 15-pin HD connector
Outputs    4 RJ-45 OUT connectors
Max. Output Level    1.4Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    3.2%
tp-114.jpg
Kramer: tp-114

1:4 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-114 is a high-performance distribution amplifier for computer graphics video or HDTV signals. The TP 114 converts a computer graphics video or HDTV signal...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    1 XGA on a 15-pin HD (F) connector; 4 twisted pair on RJ-45 OUT connectors
Max. Output Level    1.8Vpp (XGA), 1.6Vpp (CAT 5)
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 7% (CAT 5)
tp-121edid.jpg
Kramer: tp-121edid

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter With EDID

The TP-121EDID is a high-performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. The TP 121EDID converts the input...

Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 CAT 5 RJ-45 OUT connector
Audio Bandwidth (-3dB)    20Hz to 20kHz @0.5dB
Resolution    Up to WUXGA and 1080p
S/N Ratio    Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: <-80dB
tp121xl.jpg
Kramer: tp-121xl

VGA/A Twisted Pair Transmitter

The TP→ˆ’121xl is a high→ˆ’performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a...

tp-123-od.jpg
Kramer: tp-123-od

Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-123-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The...

Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-123edid.jpg
Kramer: tp-123edid

Computer Graphics Video, Stereo Audio & RS-232 Over Twisted Pair Transmitter With EDID

The TP-123EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo analog audio and unidirectional RS-232 control command signals. The...

Inputs    1 VGA/WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-125-od.jpg
Kramer: tp-125-od

Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID & EMP Protection

The TP-125-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The TP...

Inputs    1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
RS-232 Mode    Full-duplex
tp-125edid.jpg
Kramer: tp-125edid

Computer Graphics Video, Stereo Audio & Bi-directional RS-232 Over Twisted Pair Transmitter With EDID

The TP-125EDID is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bi-directional RS-232 control command signals. The...

Inputs    1 WUXGA on a 15-pin HD connector; 1 audio ANALOG 3.5mm mini jack
Output    1 RJ-45 OUT connector
Control    RS-232 2-pin terminal block
RS-232 Baud Rate    Up to 19200kbps
RS-232 Mode    Full-duplex
tp125xl.jpg
Kramer: tp-125xl

XGA Twisted Pair Transmitter

The TP→ˆ’125xl is an extended range twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS→ˆ’232 control command signals....

tp−219hd.jpg
Kramer: tp-129hd

2x1 XGA/HD Twisted Pr Trans

The TP→ˆ’219HD is a high→ˆ’performance twisted pair transmitter for computer graphics signals with resolutions up to and exceeding UXGA as well as HDTV signals up to...

tp133.jpg
Kramer: tp-133

VGA/A/DATA TP Transmitter

The TP→ˆ’133 is a high→ˆ’performance, extended range twisted pair transmitter for computer graphics video, balanced/unbalanced stereo audio and bidirectional...

tp-141.jpg
Kramer: tp-141

Computer Graphics Video & Stereo Audio Over Twisted Pair Transmitter

The TP-141 and TP-142 are an extended range twisted pair transmitter and receiver for computer graphics video (including HDTV) and unbalanced stereo audio signals, with high...

Inputs    Video: 1 computer graphics video on a 15-pin HD connector,Audio: 1 audio analog 3.5mm mini jack
Outputs    1 RJ-45 OUT connector
Max. Output Level    Video = 1V; Audio = 2.5V
Bandwidth (-3dB)    Audio: 20Hz®20kHz @0.5dB
Resolution    Exceeding UXGA
tp-185.jpg
Kramer: tp-185

8-Channel Computer Graphics Video, Audio & Data Over Twisted Pair Transmitter

The TP-185 is a twisted pair transmitter for computer graphics, unbalanced stereo audio and RS-232/RS-485 signals. The TP 185 takes up to eight channels of...

Inputs    8 UXGA on 15-pin HD connectors (VGA through WUXGA, supporting HDTV and component (YPbPr) signals); 8 unbalanced stereo audio 3.5mm mini jacks
Outputs    8 TP on RJ-45 connectors
Range    Up to 100m (328ft)
Resolution    Up to WUXGA (1920 x 1200)
Max. Output Level    Video: 1.6Vpp; Audio: 2.3Vpp
tp-205a.jpg
Kramer: tp-205a

1:5 Computer Graphics Video, Audio, & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-205A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals, and stereo or S/PDIF audio signals. The...

Input    Computer graphics video and looping computer graphics video on 15-pin HD connectors, unbalanced stereo audio on a 3.5mm mini jack, S/PDIF on an RCA connector, RS-232 on a terminal block connector
Outputs    5 RJ-45 connectors
Max. Output Level    Video: 1V; Audio: 2.3V
Max. Resolution    WUXGA & 1080p
Bandwidth (-3dB)    Audio: 20Hz to 20kHz @0.5dB
tp-210.jpg
Kramer: tp-210

1:10 Computer Graphics Video Over Twisted Pair Transmitter With Dual 15-pin HD Outputs

The TP-210 is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The TP 210...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    2 XGA on 15-pin HD (F) connectors; 10 CAT 5 on RJ-45 connectors
Max. Output level    1.9Vpp/1.6Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 2.5% (CAT 5)
tp-210a.jpg
Kramer: tp-210a

1:10 Computer Graphics Video, Audio & RS-232 Twisted Pair Transmitter & Distribution Amplifier

The TP-210A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals and stereo or S/PDIF audio signals. The...

Inputs    1 UXGA video on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack, 1 S/PDIF on an RCA connector, 1 RS-232 with 1 RxD line on a terminal block connector
Outputs    10 twisted pairs on RJ-45 connectors, 2 UXGA on 15-pin HD connectors, 2 unbalanced stereo audio on 3.5mm mini jacks, 2 S/PDIF on RCA connectors, 2 RS-232 with 2 TxD lines on terminal block connectors
Max. Output Level    Video 1.6V; Audio 2.3V
Power Outputs    12V DC 0.5A max via each RJ-45 output (PINs 4, 5)
Max. Resolution    UXGA & 1080p
tp-219hd.jpg
Kramer: tp-219hd

2x1 Computer Graphics & HDTV Video Switcher Over Twisted Pair Transmitter

The TP-219HD is a high-performance twisted pair transmitter for computer graphics signals with resolutions ranging from VGA through UXGA and higher as well as HDTV signals up to...

Inputs    2 XGA/HD on 15-pin HD (F) connectors. Input Select Button
Output    1 CAT 5 on an RJ-45 connector
Max. Output Level    1.5Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    2.3%
tp-41.jpg
Kramer: tp-41

Component Video & S/PDIF Audio Over Twisted Pair Transmitter

The TP-41 is a twisted pair transmitter for component video (YUV) and S/PDIF audio signals. The TP-41 transmitter converts component video (YUV) and S/PDIF audio...

Input    1 set of component video (Y, U, V) on RCA connectors; 1 S/PDIF (digital audio) on an RCA connector
Outputs    1 RJ-45 CAT 5 shielded connector (Line Out)
Max. Output Level    Video: 2.1Vpp
Diff. Gain    0.15%
Diff. Phase    0.68Deg
tp410.jpg
Kramer: tp-410

1:10 XGA/A/Data TP Transmitter

The TP→ˆ’410 is a high→ˆ’performance distribution amplifier for computer graphics up to WUXGA or twisted pair video, unbalanced stereo or S/PDIF audio, and...

tp-45.jpg
Kramer: tp-45

Component Video Or Computer Graphics Video With Audio Over Twisted Pair Transmitter
The TP45 and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The...
Input    1 VGA/UXGA 1Vpp/75Ω on a 15-pin HD connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 stereo analog audio, 0dBu/50kΩ, 0.5V/75Ω, on a 3.5mm jack; 1 digital S/PDIF audio on an RCA connector
Outputs    1 CAT 5 line out on an RJ-45 connector
Video Max. Input Level    VGA: 1.2Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.05Vpp on 75Ω, AC coupling
Return Loss    -18dB
Video Max. Output Level    VGA: 1.5Vpp on 75Ω, DC coupling; Y,Pb,Pr: 1.25Vpp on 75Ω, DC coupling
tp45edid.jpg
Kramer: tp-45edid

XGA/YUV + Audio TP Trans EDID

The TP→ˆ’45EDID is a high→ˆ’performance twisted pair transmitter for computer graphics or component video and unbalanced stereo audio signals. It converts the input...

tp46n.jpg
Kramer: tp-46n

XGA & YUV & Audio TP Receiver

The TP→ˆ’46N is a twisted pair receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP→ˆ’45...

tp-573.jpg
Kramer: tp-573

HDMI, Bi-directional RS-232 & IR Over Twisted Pair Transmitter

The TP-573 is a twisted pair transmitter for HDMI, bi-directional RS-232 and infrared signals. The TP 573 converts the input signals to a twisted pair signal and...

Inputs    1 HDMI connector, 1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS-232 port on a 9-pin D-sub connector
Outputs    1 CAT 5 OUT on an RJ-45 connector
Bandwidth    Supports up to 1.65Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
Power Source    12V DC, 510mA
tp580t.jpg
Kramer: tp-580t

HDMI Twisted Pair Transmitter

The TP→ˆ’580T is a high→ˆ’performance, HDBaseT twisted pair transmitter for HDMI, bidirectional RS→ˆ’232 and IR signals. The TP→ˆ’580T...

tp580txr.jpg
Kramer: tp-580txr

HDMI Twisted Pair Transmitter

The TP→ˆ’580TXR is an extended range, HDBaseT twisted pair transmitter for HDMI, bidirectional RS→ˆ’232 and IR signals. The TP→ˆ’580TXR inputs...

tp581t.jpg
Kramer: tp-581t

HDMI Twisted Pair Transmitter

The TP→ˆ’581T is a high→ˆ’quality HDBaseT twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS→ˆ’232 and IR signals. The...

tp582t.jpg
Kramer: tp-582t

HDMI Twisted Pair Transmitter

The TP→ˆ’582T is a high→ˆ’quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS→ˆ’232 and IR signals. The...

tp-953.jpg
Kramer: tp-953

DVI & Audio Over Twisted Pair Transmitter

The TP-953 is a twisted pair transmitter for DVI video and unbalanced stereo, S/PDIF or TOSLINK® audio signals. The TP 953 converts the input signals to a...

Inputs    1 DVI on a 24-pin Molex connector,1 analog audio on a 3.5mm mini jack,1 S/PDIF on an RCA connector,1 optical on a TOSLINK® connector
Outputs    2 CAT 5 OUT on RJ-45 connectors
Max. Data Rate    Supports up to 1.65Gbps per graphic channel
Indicators    IN, OUT, ON LEDs (green)
Power Source    12V DC, 460mA
tp-954.jpg
Kramer: tp-954

DVI & Audio Over Twisted Pair Receiver

The TP-954 is a receiver for DGKat™ twisted pair signals. The TP 954 converts DVI and unbalanced stereo, S/PDIF, or TOSLINK® audio signals to a twisted pair...

Inputs    2 CAT 5 IN on RJ-45 connectors
Outputs    1 DVI on a 24-pin Molex connector,1 analog audio on a 3.5mm mini jack,1 S/PDIF on a RCA connector,1 optical on a TOSLINK® connector
Max. Data Rate    Supports up to 1.65Gbps per graphic channel
Controls    EQ. select pushbutton
Indicators    IN, OUT, ON LEDs (green)
tt560.jpg
Nitek: tt560

Active Video Balun Transmitter For UTP Transmission From 500 To 6,000 Feet

The Nitek Active Transmitter Unit for Twisted Pair Video TT560 is designed for operation over Category rated cable or twisted pair communication cable and requires a Nitek active...

Unit    Transmitter
Size    1.6® H x 4.3® W x 2.4® D
Power Requirements    12 to 24 VAC or VDC, 45mA
Operating Distance w/TR560 Receiver Analog Video    500 to 7,200 feet
Operating Distance w/TR560 Receiver with DVR    500 to 6,000 feet
um400a.jpg
Lectrosonics: um400a

UHF Beltpack Transmitter for use with Lectrosonics UCR 411 Receiver

The Lectrosonics UM400A is a UHF body-pack transmitter for use with the UCR411 receiver. The transmitter features 256 user selectable UHF frequencies and digital...

vf-100t.jpg
Vicon: vf-100t

VIDEO TRANSMITTER; 12 dB, multimode fiber

The Vicon VF-100T VIDEO TRANSMITTER with 12 dB, multimode fiber, Video/Power/Optical Diagnostics, and comes with Power

vi1054vp.jpg
Vigitron: vi1054vp

UTP Transmitter-Combiner With 12 VDC Converter
The Vigitron Video, Power and Data UTP Transmission Vi 1054VP is a passive video transmitter (non-amplified) device that includes a 24 VAC to 12 VDC converter to power cameras...
Video Format    NTSC, PAL, SECAM
Frequency    DC to 10 MHz
Coax    75 Ohm
Twisted Pair    100 Ohms /- 20%, 24 AWG minimum Category 2-7
CMRR    60 dB
vi1316vpd.jpg
Vigitron: vi1316vpd

16-Channel UTP Video, Data And Power Combiner
The Vigitron Video, Power and Data UTP Transmission Vi-1316VPD is a passive "pass-through" device that combines video, PTZ data and camera power over a single 4-pair UTP cable to...
Video Format    NTSC, PAL, SECAM
Frequency    DC to 10 MHz
Coax    75 Ohm
Twisted Pair    100 Ohms /- 20%, 24 AWG minimum, Category 2-7
Power Inputs    16 individually fused at 1.5 A
vi6100vt.jpg
Vigitron: vi6100vt

Active UTP Video Transmitter
The Vigitron Active UTP Transmission Vi6100VT is an advanced active device that transmits high resolution color or black and white video over unshielded twisted pair wires. The...
Video Format    NTSC, PAL, SECAM
Frequency    20 Hz to 6 MHz
Coax    75 Ohm
Twisted Pair    100 Ohms /- 20%, 24 AWG min up to 6000 feet (1830 m) Unshielded Category 2-7
CMRR    70 dB
vi6300vt.jpg
Vigitron: vi6300vt

Active UTP Video Transmitter
The Vigitron Active UTP Transmission Vi 6300VT is an advanced active device that transmits high resolution color or black and white video over unshielded twisted pair wires. The...
Video Format    NTSC, PAL, SECAM
Frequency    20 Hz to 6 MHz
Coax    75 Ohm
Twisted Pair    100 Ohms /- 20%, 24 AWG minimum up to 6,000 ft. (1,830 m) unshielded Category 2-7
CMRR    70 dB
vm-1h4c.jpg
Kramer: vm-1h4c

1:4 HDMI TP Trans & DA

The VM→ˆ’1H4C is a high→ˆ’quality twisted pair distribution amplifier for HDMI signals. The unit receives serial commands and IR signals transparently via the...

vp-12nhd.jpg
Kramer: vp-12nhd

1:12 Computer Graphics Video & HDTV Distribution Amplifier With 3 Twisted Pair Transmitters

The VP12NHD is a high-performance distribution amplifier for computer graphics video signals. The VP12NHD takes one input, provides correct buffering and...

Input    1 UXGA on a 15-pin HD (F) connector
Outputs    12 UXGA on 15-pin HD (F) connectors; 3 RJ-45 OUT connectors
Max. Output level    1.7Vpp
Bandwidth (-3dB)    330MHz (UXGA)
Max. Resolution    Up to UXGA
vp-300thd.jpg
Kramer: vp-300thd

1:2 Computer Graphics Video & HDTV Distribution Amplifier & Twisted Pair Transmitter

The VP-300THD is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher as well as HDTV. The...

Input    1 XGA on a 15-pin HD connector
Outputs    2 XGA on 15-pin HD connectors; 1 twisted pair on an RJ-45 connector
Max. Output level    2.3Vpp (XGA), 1.4Vpp (CAT 5)
Max. Resolution    WUXGA & 1080p
Diff. Gain    0.03% (XGA), 2.6% (CAT 5)
wl-t-pro.jpg
Azden: wl-t-pro

Body-pack transmitter with EX-503 mic

The Azden WLT/PRO VHF Wireless Bodypack Transmitter consists of the WM-Pro bodypack transmitter and EX-503 omnidirectional lavalier microphone. The transmitter features 2...

wp-1.jpg
Marshall Electronics: wp-1

RX + Box TX Wireless HDMI Series

The Marshall Electronics WP-1 Wireless HDMI Transmitter Receiver System without battery plate features a range of up to 100' line-of-sight with less than 1 millisecond of latency,...

wp-1c.jpg
Marshall Electronics: wp-1c

Dual Battery Holder for Canon LPE6 for use with WP-1 Series Transmission System

The Marshall Electronics WP-1C Wireless HDMI Transmitter Receiver System with dual Canon LP-E6 type battery plates features a range of up to 100' line-of-sight with less than 1...

wp-1n.jpg
Marshall Electronics: wp-1n

Dual Battery Holder for Nikon EL3 for use with WP-1 Series Transmission System

The Marshall Electronics WP-1N Wireless HDMI Transmitter Receiver System with dual Nikon EN-EL3 type battery plates features a range of up to 100' line-of-sight with less than 1...

wp-1p.jpg
Marshall Electronics: wp-1p

Single Battery Holder for Panasonic VW-VBG6

The WP-1P Wireless HDMI Transmitter Receiver System with single Panasonic VW-VBG6 type battery plate from Marshall Electronics features a range of up to 100' line-of-sight with...

wp-1s.jpg
Marshall Electronics: wp-1s

Single Battery Holder for Sony NPF970 for use with WP-1 Series Transmission System

The WP-1S Wireless HDMI Transmitter Receiver System with single Sony NP-F970 type battery plate from Marshall Electronics features a range of up to 100' line-of-sight with less...

wp-2c.jpg
Marshall Electronics: wp-2c

Dual Battery Holder for Canon LPe6 for use with WP-2 Series Transmission System

The WP-2C Wireless HDMI Transmitter Receiver System with dual Canon LE-E6 type battery plates from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

wp-2n.jpg
Marshall Electronics: wp-2n

Dual Battery Holder for Nikon EL3 for use with WP-2 Series Transmission System

The WP-2N Wireless HDMI Transmitter Receiver System with dual Nikon EN-EL3 type battery plates from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...

wp-2p.jpg
Marshall Electronics: wp-2p

Single Battery Holder for Panasonic VW-VBG6

The WP-2P Wireless HDMI Transmitter Receiver System with single Panasonic VW-VBG6 battery plate from Marshall Electronics features stick-style HDMI dongle transmitter that can...

wp-2s.jpg
Marshall Electronics: wp-2s

Single Battery Holder for Sony NPF970 for use with WP-2 Series Transmission System

The WP-2S Wireless HDMI Transmitter Receiver System with single Sony NPF970 type battery plate from Marshall Electronics features stick-style HDMI dongle transmitter that can plug...



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.