The NVT 16-Channel Video Passive Transceiver Hub NV-1613 is an 16 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twiste...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

The NVT 16-Channel Video Passive Transceiver Hub NV-1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshi...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

Employing NVT's latest generation StubEQ technology, the NVT 16 Channel StubEQ Active Receiver Hub NV-1642 is a 16-channel active (amplified) hub that allows the transmission of re...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

Employing NVT's latest generation Digital EQ technology, the NVT 16-Channel Digital EQ Active Receiver DA Hub NV-1672 is an 16-channel active (amplified) hub that allows the transm...

Video Frequency response	DC to 10 MHz
Video Equalization	0.5 dB typ
Video Automatic	(no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms

The NVT 16 Channel Power Supply Cable Passive Integrator Hub NV-16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, a...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohmsVideo Impedance UTP, RJ45: 100 ohms
Network Wiring	One four-pair Cat5 or better per channel

The NVT 16 Channel Power Supply Passive Receiver Hub NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured buildi...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance , RJ45	100 ohms

The NVT 16-Channel Power Supply StubEQ Active Receiver Hub NV-16PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms

The NVT 32-Channel Video Passive Transceiver Hub NV-3213 is an 32 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twiste...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

The NVT 32-Channel Video Passive Transceiver Hub NV-3213S is a compact 32-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshi...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

Employing NVT's latest generation StubEQ™ technology, the NVT 32 Channel StubEQ Active Receiver Hub NV-3242 is a 32-channel active (amplified) hub that allows the transmission of ...

Video Frequency response	DC to 10 MHz
Video Equalization	0.5 dB typ
Video Automatic	(no adjustment) 0 to 1,250ft (0 to 380km) for NTSC or PAL standards
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms

Employing NVT's latest generation Digital EQ technology, the NVT 32-Channel Digital EQ Active Receiver DA Hub NV-3272 is an 32-channel active (amplified) hub that allows the transm...

Video Frequency response	DC to 10 MHz
Video Equalization	0.5 dB typ
Video Automatic	(no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms

The NVT 32-Channel Power Supply StubEQ Active Receiver Hub NV-32PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms

Employing NVT's latest generation StubEQ technology, the NVT 4 Channel StubEQ Active Receiver Hub NV-442 is an 4-channel active (amplified) hub that allows the transmission of full...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

The NVT 4 Channel Power Supply Cable Passive Integrator Hub NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all ...

Camera Power	Each camera is powered by a fully isolated (floating) Class 2 SELV output, individually switchable 24VAC / OFF/ 28VAC at up to 1 Amp.
Power inlet	IEC with molded power cord (included)
Power Input On-off switch	Rear panel
Power Input Voltage	115 / 230 VAC
Power Input Current	1.25 / 0.625 Amps

The NVT 4 Channel Power Supply Passive Receiver Hub NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building...

Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms
Video Network Wiring	One four-pair Cat5 or better per channel
Camera Power	Fully isolated (floating) Class 2 SELV output, individually switchable 24VAC/OFF/28VAC at up to 1 Amp.

Typically installed in the wiring closet or IDF room, the NVT Cable Integrator Hub NV-716J-PVD is a passive “pass-through” wiring device that efficiently consolidates camera powe...

Video UTP, RJ45 Connectors	100 ohms
Power	16 to 24AWG (0,5mm to 1,3mm)
Camera PVD connections	Four front-panel RJ45 outputs support up to four fixed or P/T/Z telemetry cameras over 4-pair UTP
Control Room VIdeo	UTP video signals are passed through the unit and delivered to the control/MDF room via rear-panel RJ45 connectors.
Control Room Data	RS-422 or RS-485 type P/T/Z telemetry/ data signals are paralleled together in groups of four, and passed through the unit and delivered to the control room via a rear-panel RJ45 connector.

The NVT 8-Channel Video Passive Transceiver Hub NV-813S is a compact 8-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshield...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

Employing NVT's latest generation StubEQ technology, the NVT 8 Channel StubEQ Active Receiver Hub NV-842 is an 8-channel active (amplified) hub that allows the transmission of full...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, Screw terminal block or RJ45	100 ohms

Employing NVT's latest generation Digital EQ technology, the NVT 8-Channel Digital EQ Active Receiver DA Hub NV-872 is an 8-channel active (amplified) hub that allows the transmiss...

Video Frequency response	DC to 10 MHz
Video Equalization	0.5 dB typ
Video Automatic	(no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms

The NVT 8 Channel Power Supply Passive Receiver Hub NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building...

Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC	75 ohms
Video Impedance UTP, RJ45	100 ohms
Video Network Wiring	One four-pair Cat5 or better per channel
Camera Power	Fully isolated (floating) Class 2 SELV output, individually switchable 24VAC/OFF/28VAC at up to 1 Amp.

The NVT 8-Channel Power Supply StubEQ Active Receiver Hub NV-8PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured bu...

Video Frequency response	DC to 10 MHz
Video Attenuation	0.5 dB typ
Video Common-mode / Differential-mode rejection	15 KHz to 5 MHz 60 dB typ
Video Impedance	Coax, female BNC 75 ohms
Video Impedance	UTP, RJ45 100 ohms

The Nitek Unshielded Twisted Pair TR515x4 is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using the RK400 card ...

Unit	Transceiver
Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(4) Balenced low voltage current loop
Output	(4) 1vpp composite video monochrome or color

The Nitek Modular Active Video Receiver Card TR515x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card cage...

Unit	Transceiver
Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(8) Balenced low voltage current loop
Output	(8) 1vpp composite video monochrome or color

The Nitek Unshielded Twisted Pair TR560x4 modular card is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using th...

Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(4) Balenced low voltage current loop
Output	(4) 1vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek Modular Active Video Receiver Card TR560x8 is designed for use with the modular rack system. The system holds modular cards in any combination, using the VH3200 card cage...

Size	1 card slot
Power Requirements	Card powered by modular rack
Input	(8) Balenced low voltage current loop
Output	(8) 1vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Vigitron UTP Transmission VB1001F is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fee...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission VB1001M is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fee...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission VB1001P is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fee...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission VB-1007M is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fe...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Nitek Video Balun Transceiver Card VB41x4 modular card is designed for use with the modular rack system. Each card has 4 video balun units, built-in surge suppression and video...

Unit	Transceiver
Size	1 card slot
Twisted pair Input	(4) Balenced low voltage current loop
Output	(4) 1vpp composite video monochrome or color
Common Mode Rejection	60dB

The Nitek Video Balun Card for Twisted Pair VB41x8 modular card is designed for use with the modular rack system. Each card has 8 video balun units, built-in surge protection and v...

Size	1 card slot
Twisted Pair Input	(8) Balenced low voltage current loop
Output	(8) 1vpp composite video monochrome or color
Common Mode Rejection	60dB
Video Format	RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)

The Nitek 16 port video balun hub VH1639 with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, single or multi-port video balun hubs, sta...

Unit	Transceiver
Size	1 RU x 6.0" (D)
Power Requirements	NONE REQUIRED
Video Input Connection	Standard BNC connector for 1 Vpp composite video monochrome or color
Video Format	RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)

This item is DISCONTINUED.

For an alternate solution, please see Nitek VH3251

 

Size	1 RU x 6.0" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek 16 port active video hubs VH1656 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other ...

Size	1 RU x 6.0" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek 32 port active video hub VH3200 with built-in surge suppression and video detection. Systems operate with other Nitek UTP video equipment including, Video transceiver hub...

Unit	Transceiver
Size	1 RU x 6.0" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The Nitek 32 Port Video Balun Hub VH3239 with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, video balun hubs, standard video balun tra...

Unit	Transceiver
Size	1 RU x 9.5" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The Nitek 32 port active video hub VH3251 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP v...

Unit	Transceiver
Size	1 RU x 9.5" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The Nitek 32 port active video hub VH3256 with built-in surge suppression, ground loop isolation, gain and loss control, and video detection. Systems operate with other Nitek UTP v...

Unit	Transceiver
Size	1 RU x 9.5" (D)
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The Nitek VH439 is a four port video balun hub with built-in surge suppression. The four port video balun hub operates as a transmitter or receiver in an installation requiring the...

Size	1.6" (H) x 4.3" (W) x 2.5" (D)
Power Requirements	NONE REQUIRED
Video Input Connection	Standard BNC connector for 1 Vpp composite video Monochrome or Color
Video Format	RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
UTP Connection Type	Screw terminals or RJ45 modular UTP connector providing balanced low voltage current loop

The Nitek VH451 4 port active video mini-hub with gain and loss control, built-in surge suppression, ground loop isolation and video detection. Systems operate with other Nitek UTP...

Unit	Transceiver
Size	5.5" (W) x 1.8" (H) x 4.6" (D)
Power Requirements	24 VAC 300mA max. Class 2 (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color

The Nitek VH456 4 port active video mini-hub with gain and loss control, built-in surge suppression, ground loop isolation and video detection. Systems operate with other Nitek UTP...

Size	5.5" (W) x 1.8" (H) x 4.6" (D)
Power Requirements	24 VAC 300mA max. Class 2 (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek 8 port video balun hubs VH839 with built-in surge suppression. Systems operate with other Nitek UTP video equipment including, video balun hubs, standard video balun tran...

Unit	Transceiver
Size	1 RU x 6.0"D
Power Requirements	NONE REQUIRED
Video Input Connection	Standard BNC connector for 1 Vpp composite video monochrome or color
Video Format	RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)

The Nitek VH839M video balun hubs are multichannel video transmission devices that provide a low cost means of sending quality live video over Category UTP cabling...

The Nitek 8 port active video hubs VH851 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other Ni...

Size	1 RU x 6.0"D
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek 8 port active video hubs VH851M with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other N...

Size	1 RU x 6.0"D
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Nitek 8 or 16 port active video hubs VH856 with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with ot...

Size	1 RU x 6.0"D
Power Requirements	24 VAC @ 450mA (Wall transformer provided with unit)
Video Input	Balanced low voltage current loop
Video Output	1 Vpp composite video monochrome or color
Common Mode Rejection	>70dB

The Vigitron UTP Transmission Vi 1001F is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fe...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission Vi-1001M is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fe...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission Vi 1001P is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fe...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission Vi 1003M is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fe...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission Vi 1004 is a passive transceiver hub that transmits or receives video signals over unshielded twisted pair (UTP) wires, point-to-point, for distances ...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission Vi 1006M is a passive transmission device that transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 fe...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB

The Vigitron UTP Transmission Vi-1008 is a 8 channel passive transceiver hub that transmits or receives video signals over unshielded twisted pair (UTP) wires, point-to-point for d...

Video Format	NTSC, PAL, SECAM
Frequency	DC to 10 MHz
Coax	75 Ohm
Twisted Pair	100 Ohms /- 20%, 24 AWG minimum, up to 1,000 ft. (305 m)* unshielded Category 2-7
Insertion Loss	0.3 dB