Call Now: 1-800-284-2288 |
|
Optical Imaging Technologies for Machine Vision |
 Opto Engineering: coe-004-c-poe-030-ir-c |
Area scan camera IMX297, CMOS, Global shutter, 720 x 540, 0.4 MP, 6.9 μm, 1/2.9", Color, 41.7 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-004-m-poe-030-ir-c |
Area scan camera IMX297, CMOS, Global shutter, 720 x 540, 0.4 MP, 6.9 μm, 1/2.9", Mono, 125.2 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-013-c-poe-040-ir-c |
Area scan camera -, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 μm, 1/2", Color, 30.9 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-013-c-usb-040-ir-c |
Area scan camera -, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 μm, 1/2", Color, 67.0 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-013-m-poe-040-ir-c |
Area scan camera -, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 μm, 1/2", Mono, 92.8 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-013-m-usb-040-ir-c |
Area scan camera -, CMOS, Global shutter, 1280 x 1024, 1.3 MP, 4.8 μm, 1/2", Mono, 201.0 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-016-c-poe-022-ir-c |
Area scan camera IMX296, CMOS, Global shutter, 1440 x 1080, 1.6 MP, 3.45 μm, 1/2.9", Color, 21.9 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-016-c-usb-030-ir-c |
Area scan camera IMX273, CMOS, Global shutter, 1440 x 1080, 1.6 MP, 3.5 μm, 1/2.9", Color, 83.0 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-016-m-poe-022-ir-c |
Area scan camera IMX296, CMOS, Global shutter, 1440 x 1080, 1.6 MP, 3.45 μm, 1/2.9", Mono, 65.8 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-016-m-usb-030-ir-c |
Area scan camera IMX273, CMOS, Global shutter, 1440 x 1080, 1.6 MP, 3.5 μm, 1/2.9", Mono, 249.1 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-023-c-poe-070-ir-c |
Area scan camera IMX249, CMOS, Global shutter, 1920 x 1200, 2.3 MP, 5.86 μm, 1/1.2", Color, 13.6 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-023-c-usb-060-ir-c |
Area scan camera IMX249, CMOS, Global shutter, 1920 x 1200, 2.3 MP, 5.9 μm, 1/1.2", Color, 13.3 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-023-m-poe-070-ir-c |
Area scan camera IMX249, CMOS, Global shutter, 1920 x 1200, 2.3 MP, 5.86 μm, 1/1.2", Mono, 41.0 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-023-m-usb-060-ir-c |
Area scan camera IMX249, CMOS, Global shutter, 1920 x 1200, 2.3 MP, 5.9 μm, 1/1.2", Mono, 41.0 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-032-c-poe-050-ir-c |
Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.2 MP, 3.45 μm, 1/1.8", Color, 12.7 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-032-m-poe-050-ir-c |
Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.2 MP, 3.45 μm, 1/1.8", Mono, 38.1 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-050-c-poe-060-ir-c |
Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Color, 8.1 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-050-c-usb-070-ir-c |
Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Color, 20.0 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-050-m-poe-060-ir-c |
Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Mono, 24.2 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-050-m-usb-070-ir-c |
Area scan camera IMX264, CMOS, Global shutter, 2448 x 2048, 5.0 MP, 3.45 μm, 2/3", Mono, 60.0 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-089-c-poe-070-ir-c |
Area scan camera IMX267, CMOS, Global shutter, 4096 x 2160, 8.8 MP, 3.45 μm, 1", Color, 4.3 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-089-c-usb-070-ir-c |
Area scan camera IMX267, CMOS, Global shutter, 4096 x 2160, 8.8 MP, 3.45 μm, 1", Color, 10.7 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-089-m-poe-070-ir-c |
Area scan camera IMX267, CMOS, Global shutter, 4096 x 2160, 8.8 MP, 3.45 μm, 1", Mono, 13.0 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-089-m-usb-070-ir-c |
Area scan camera IMX267, CMOS, Global shutter, 4096 x 2160, 8.8 MP, 3.45 μm, 1", Mono, 32.2 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-122-c-poe-050-ir-c |
Area scan camera IMX226, CMOS, Rolling shutter, 4024 x 3036, 12.2 MP, 1.85 μm, 1/1.7", Color, 3.2 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-122-m-poe-050-ir-c |
Area scan camera IMX226, CMOS, Rolling shutter, 4024 x 3036, 12.2 MP, 1.85 μm, 1/1.7", Mono, 9.7 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-123-c-poe-080-ir-c |
Area scan camera IMX304, CMOS, Global shutter, 4096 x 3000, 12.3 MP, 3.45 μm, 1.1", Color, 3.1 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-123-c-usb-090-ir-c |
Area scan camera IMX304, CMOS, Global shutter, 4096 x 3000, 12.3 MP, 3.45 μm, 1.1", Color, 10.1 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-123-m-poe-080-ir-c |
Area scan camera IMX304, CMOS, Global shutter, 4096 x 3000, 12.3 MP, 3.45 μm, 1.1", Mono, 9.4 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-123-m-usb-090-ir-c |
Area scan camera IMX304, CMOS, Global shutter, 4096 x 3000, 12.3 MP, 3.45 μm, 1.1", Mono, 30.3 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-200-c-poe-080-ir-c |
Area scan camera IMX183, CMOS, Rolling shutter, 5472 x 3648, 20.4 MP, 2.4 μm, 1", Color, 1.9 fps, 1 GigE, POE, C-mount, IR cut filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-200-c-usb-080-ir-c |
Area scan camera IMX183, CMOS, Rolling shutter, 5472 x 3648, 20.4 MP, 2.40 μm, 1", Color, 6.4 fps, USB 3.0, C-mount, IR cut
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-200-m-poe-080-ir-c |
Area scan camera IMX183, CMOS, Rolling shutter, 5472 x 3648, 20.4 MP, 2.4 μm, 1", Mono, 5.9 fps, 1 GigE, POE, C-mount, AR filter
Color-model's fps are calculated using RGB8 pixel format Measured at 12VDC |
 Opto Engineering: coe-200-m-usb-080-ir-c |
Area scan camera IMX183, CMOS, Rolling shutter, 5472 x 3648, 20.4 MP, 2.40 μm, 1", Mono, 19.2 fps, USB 3.0, C-mount, AR
Color-model's fps are calculated using RGB8 pixel format Measured at 5 VDC (USB3.0 power supply) |
 Opto Engineering: coe-4k-c-poe-010-j |
4K Line Scan Camera, 4096 x 2, 7 μm, CMOS, GigE, Color, M42x1 FD 12 mount
Using image compression mode Measured at 12VDC |
 Opto Engineering: coe-4k-m-poe-010-j |
4K Line Scan Camera, 4096 x 2, 7 μm, CMOS, GigE, Mono, M42x1 FD 12 mount
Using image compression mode Measured at 12VDC |
 Opto Engineering: el5mp0656 |
5 MP fixed focal lens with liquid lens technology, focal length 6 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image.... |
 Opto Engineering: el5mp0856 |
5 MP fixed focal lens with liquid lens technology, focal length 8 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image.... |
 Opto Engineering: el5mp1256 |
5 MP fixed focal lens with liquid lens technology, focal length 12 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image.... |
 Opto Engineering: el5mp1656 |
5 MP fixed focal lens with liquid lens technology, focal length 16 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image.... |
 Opto Engineering: el5mp2556 |
5 MP fixed focal lens with liquid lens technology, focal length 25 mm, ƒ/N 5.6, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Percent deviation of the real image compared to an ideal, undistorted image.... |
 Opto Engineering: en10mpl1220 |
10 Megapixel high resolution fixed focal lens for 4/3” sensors, focal length 12 mm
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en10mpl1620 |
10 Megapixel high resolution fixed focal lens for 4/3” sensors, focal length 16 mm
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en10mpl2520 |
10 Megapixel high resolution fixed focal lens for 4/3” sensors, focal length 25 mm
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en10mpl3520 |
10 Megapixel high resolution fixed focal lens for 4/3” sensors, focal length 35 mm
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en10mpl5020 |
10 Megapixel high resolution fixed focal lens for 4/3” sensors, focal length 50 mm
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp0814 |
Fixed focal 2 Megapixel lens, focal length 8 mm, f/N 1.4 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp1214 |
Fixed focal 2 Megapixel lens, focal length 12 mm, f/N 1.4 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp1614 |
Fixed focal 2 Megapixel lens, focal length 16 mm, f/N 1.4 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp2514 |
Fixed focal 2 Megapixel lens, focal length 25 mm, f/N 1.4 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp3514 |
Fixed focal 2 Megapixel lens, focal length 35 mm, f/N 1.4 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp5018 |
Fixed focal 2 Megapixel lens, focal length 50 mm, f/N 1.8 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en2mp7528 |
Fixed focal 2 Megapixel lens, focal length 75 mm, f/N 2.8 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp0816 |
Fixed focal 5 Megapixel lens, focal length 8 mm, f/N 1.6 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp1216 |
Fixed focal 5 Megapixel lens, focal length 12 mm, f/N 1.6 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp1616 |
Fixed focal 5 Megapixel lens, focal length 16 mm, f/N 1.6 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp2514 |
Fixed focal 5 Megapixel lens, focal length 25 mm, f/N 1.4 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp3514 |
Fixed focal 5 Megapixel lens, focal length 35 mm, f/N 1.4 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp5018 |
Fixed focal 5 Megapixel lens, focal length 50 mm, f/N 1.8 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en5mp7520 |
Fixed focal 5 Megapixel lens, focal length 75 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en8mpl0818 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 8 mm, f/N 1.8 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en8mpl1220 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 12 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en8mpl1620 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 16 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en8mpl2518 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 25 mm, f/N 1.8 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en8mpl3520 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 35 mm, f/N 2.0 - close, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: en8mpl5020 |
8 Megapixel high resolution fixed focal lens for 1” sensors, focal length 50 mm, f/N 2.0 - 22, C-mount
Calculated at minimum object distance. Working distance: distance between the front end of the mechanics and the object. Value calculated at the corner point of the sensor diagonal. For distortion... |
 Opto Engineering: ita04-gm-10c |
Area scan camera 728 x 544 MP, Sony IMX287, CMOS Global shutter, 1/2.9", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita120-gc-10c |
Area scan camera 4112 x 3008 MP, Sony IMX304, CMOS Global shutter, 1.1", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita120-gc-10c-el |
Area scan camera 4112 x 3008 MP, Sony IMX304, CMOS Global shutter, 1.1", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita120-gm-10c |
Area scan camera 4112 x 3008 MP, Sony IMX304, CMOS Global shutter, 1.1", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita120-gm-10c-el |
Area scan camera 4112 x 3008 MP, Sony IMX304, CMOS Global shutter, 1.1", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita124-gc-20c |
Area scan camera 4128 x 3008 MP, Sony IMX545, CMOS Global shutter, 1/1.1", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita124-gc-20c-el |
Area scan camera 4128 x 3008 MP, Sony IMX545, CMOS Global shutter, 1/1.1", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita124-gm-20c |
Area scan camera 4128 x 3008 MP, Sony IMX545, CMOS Global shutter, 1/1.1", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita124-gm-20c-el |
Area scan camera 4128 x 3008 MP, Sony IMX545, CMOS Global shutter, 1/1.1", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita16-gc-10c |
Area scan camera 1456 x 1088 MP, Sony IMX273, CMOS Global shutter, 1/2.9", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita16-gc-10c-el |
Area scan camera 1456 x 1088 MP, Sony IMX273, CMOS Global shutter, 1/2.9", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita16-gm-10c |
Area scan camera 1456 x 1088 MP, Sony IMX273, CMOS Global shutter, 1/2.9", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita16-gm-10c-el |
Area scan camera 1456 x 1088 MP, Sony IMX273, CMOS Global shutter, 1/2.9", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita162-gc-20c |
Area scan camera 5328 x 3040 MP, Sony IMX542, CMOS Global shutter, 1.1", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita162-gc-20c-el |
Area scan camera 5328 x 3040 MP, Sony IMX542, CMOS Global shutter, 1.1", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita162-gm-20c |
Area scan camera 5328 x 3040 MP, Sony IMX542, CMOS Global shutter, 1.1", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita162-gm-20c-el |
Area scan camera 5328 x 3040 MP, Sony IMX542, CMOS Global shutter, 1.1", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita168-gc-10j |
Area scan camera 5472 x 3084 MP, Sony IMX387, CMOS Global shutter, 4/3", Color, 1 GigE, POE, M42x1 FD 12 mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita168-gm-10j |
Area scan camera 5472 x 3084 MP, Sony IMX387, CMOS Global shutter, 4/3", Mono, 1 GigE, POE, M42x1 FD 12 mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita196-gc-10j |
Area scan camera 4432 x 4436 MP, Sony IMX367, CMOS Global shutter, 4/3", Color, 1 GigE, POE, M42x1 FD 12 mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita196-gm-10j |
Area scan camera 4432 x 4436 MP, Sony IMX367, CMOS Global shutter, 4/3", Mono, 1 GigE, POE, M42x1 FD 12 mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita204-gc-20c |
Area scan camera 4512 x 4512 MP, Sony IMX541, CMOS Global shutter, 1.1", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita204-gc-20c-el |
Area scan camera 4512 x 4512 MP, Sony IMX541, CMOS Global shutter, 1.1", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita204-gm-20c |
Area scan camera 4512 x 4512 MP, Sony IMX541, CMOS Global shutter, 1.1", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita204-gm-20c-el |
Area scan camera 4512 x 4512 MP, Sony IMX541, CMOS Global shutter, 1.1", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita24-gc-10c |
Area scan camera 1936 x 1216 MP, Sony IMX392, CMOS Global shutter, 1/2.3", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita24-gc-10c-el |
Area scan camera 1936 x 1216 MP, Sony IMX392, CMOS Global shutter, 1/2.3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita24-gm-10c |
Area scan camera 1936 x 1216 MP, Sony IMX392, CMOS Global shutter, 1/2.3", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita24-gm-10c-el |
Area scan camera 1936 x 1216 MP, Sony IMX392, CMOS Global shutter, 1/2.3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita246-gc-20c |
Area scan camera 5328 x 4608 MP, Sony IMX540, CMOS Global shutter, 1.2", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita246-gc-20c-el |
Area scan camera 5328 x 4608 MP, Sony IMX540, CMOS Global shutter, 1.2", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita246-gm-20c |
Area scan camera 5328 x 4608 MP, Sony IMX540, CMOS Global shutter, 1.2", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita246-gm-20c-el |
Area scan camera 5328 x 4608 MP, Sony IMX540, CMOS Global shutter, 1.2", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita315-gc-10j |
Area scan camera 6480 x 4860 MP, Sony IMX342, CMOS Global shutter, APS-C, Color, 1 GigE, POE, M42x1 FD 12 mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita315-gm-10j |
Area scan camera 6480 x 4860 MP, Sony IMX342, CMOS Global shutter, APS-C, Mono, 1 GigE, POE, M42x1 FD 12 mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita32-gc-10c |
Area scan camera 2064 x 1544 MP, Sony IMX265, CMOS Global shutter, 1/1.8", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita32-gc-10c-el |
Area scan camera 2064 x 1544 MP, Sony IMX265, CMOS Global shutter, 1/1.8", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita32-gm-10c |
Area scan camera 2064 x 1544 MP, Sony IMX265, CMOS Global shutter, 1/1.8", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita32-gm-10c-el |
Area scan camera 2064 x 1544 MP, Sony IMX265, CMOS Global shutter, 1/1.8", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita50-gc-10c |
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita50-gc-10c-el |
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita50-gm-10c |
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita50-gm-10c-el |
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita51-gc-20c |
Area scan camera 2472 x 2064 MP, Sony IMX547, CMOS Global shutter, 1/1.8", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita51-gc-20c-el |
Area scan camera 2472 x 2064 MP, Sony IMX547, CMOS Global shutter, 1/1.8", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita51-gm-20c |
Area scan camera 2472 x 2064 MP, Sony IMX547, CMOS Global shutter, 1/1.8", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita51-gm-20c-el |
Area scan camera 2472 x 2064 MP, Sony IMX547, CMOS Global shutter, 1/1.8", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita81-gc-20c |
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita81-gc-20c-el |
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita81-gm-20c |
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita81-gm-20c-el |
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita89-gc-10c |
Area scan camera 4112 x 2176 MP, Sony IMX267, CMOS Global shutter, 1", Color, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita89-gc-10c-el |
Area scan camera 4112 x 2176 MP, Sony IMX267, CMOS Global shutter, 1", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: ita89-gm-10c |
Area scan camera 4112 x 2176 MP, Sony IMX267, CMOS Global shutter, 1", Mono, 1 GigE, POE, C mount
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply To be measured after pre-series production Case temperature, measured on the front part of the camera body... |
 Opto Engineering: ita89-gm-10c-el |
Area scan camera 4112 x 2176 MP, Sony IMX267, CMOS Global shutter, 1", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
Color-model's fps are calculated using RGB8 pixel format Measured with 24V power supply and liquid lens connected to the camera To be measured after pre-series production Case temperature, measured... |
 Opto Engineering: lt2bc048036-b |
High uniformity continuous LED backlights, 48x36 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-b-co |
High uniformity continuous LED backlights, 48x36 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-g |
High uniformity continuous LED backlights, 48x36 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-g-co |
High uniformity continuous LED backlights, 48x36 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-ir860 |
High uniformity continuous LED backlights, 48x36 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-r |
High uniformity continuous LED backlights, 48x36 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-r-co |
High uniformity continuous LED backlights, 48x36 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-w |
High uniformity continuous LED backlights, 48x36 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048036-w-co |
High uniformity continuous LED backlights, 48x36 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-b |
High uniformity continuous LED backlights, 48x72 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-b-co |
High uniformity continuous LED backlights, 48x72 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-g |
High uniformity continuous LED backlights, 48x72 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-g-co |
High uniformity continuous LED backlights, 48x72 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-ir860 |
High uniformity continuous LED backlights, 48x72 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-r |
High uniformity continuous LED backlights, 48x72 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-r-co |
High uniformity continuous LED backlights, 48x72 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-w |
High uniformity continuous LED backlights, 48x72 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048072-w-co |
High uniformity continuous LED backlights, 48x72 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-b |
High uniformity continuous LED backlights, 48x108 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-b-co |
High uniformity continuous LED backlights, 48x108 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-g |
High uniformity continuous LED backlights, 48x108 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-g-co |
High uniformity continuous LED backlights, 48x108 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-ir860 |
High uniformity continuous LED backlights, 48x108 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-r |
High uniformity continuous LED backlights, 48x108 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-r-co |
High uniformity continuous LED backlights, 48x108 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-w |
High uniformity continuous LED backlights, 48x108 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048108-w-co |
High uniformity continuous LED backlights, 48x108 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-b |
High uniformity continuous LED backlights, 48x144 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-b-co |
High uniformity continuous LED backlights, 48x144 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-g |
High uniformity continuous LED backlights, 48x144 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-g-co |
High uniformity continuous LED backlights, 48x144 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-ir860 |
High uniformity continuous LED backlights, 48x144 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-r |
High uniformity continuous LED backlights, 48x144 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-r-co |
High uniformity continuous LED backlights, 48x144 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-w |
High uniformity continuous LED backlights, 48x144 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048144-w-co |
High uniformity continuous LED backlights, 48x144 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-b |
High uniformity continuous LED backlights, 48x180 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-b-co |
High uniformity continuous LED backlights, 48x180 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-g |
High uniformity continuous LED backlights, 48x180 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-g-co |
High uniformity continuous LED backlights, 48x180 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-ir860 |
High uniformity continuous LED backlights, 48x180 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-r |
High uniformity continuous LED backlights, 48x180 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-r-co |
High uniformity continuous LED backlights, 48x180 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-w |
High uniformity continuous LED backlights, 48x180 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048180-w-co |
High uniformity continuous LED backlights, 48x180 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-b |
High uniformity continuous LED backlights, 48x216 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-b-co |
High uniformity continuous LED backlights, 48x216 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-g |
High uniformity continuous LED backlights, 48x216 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-g-co |
High uniformity continuous LED backlights, 48x216 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-ir860 |
High uniformity continuous LED backlights, 48x216 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-r |
High uniformity continuous LED backlights, 48x216 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-r-co |
High uniformity continuous LED backlights, 48x216 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-w |
High uniformity continuous LED backlights, 48x216 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc048216-w-co |
High uniformity continuous LED backlights, 48x216 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-b |
High uniformity continuous LED backlights, 96x36 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-b-co |
High uniformity continuous LED backlights, 96x36 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-g |
High uniformity continuous LED backlights, 96x36 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-g-co |
High uniformity continuous LED backlights, 96x36 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-ir860 |
High uniformity continuous LED backlights, 96x36 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-r |
High uniformity continuous LED backlights, 96x36 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-r-co |
High uniformity continuous LED backlights, 96x36 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-w |
High uniformity continuous LED backlights, 96x36 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096036-w-co |
High uniformity continuous LED backlights, 96x36 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-b |
High uniformity continuous LED backlights, 96x72 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-b-co |
High uniformity continuous LED backlights, 96x72 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-g |
High uniformity continuous LED backlights, 96x72 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-g-co |
High uniformity continuous LED backlights, 96x72 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-ir860 |
High uniformity continuous LED backlights, 96x72 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-r |
High uniformity continuous LED backlights, 96x72 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-r-co |
High uniformity continuous LED backlights, 96x72 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-w |
High uniformity continuous LED backlights, 96x72 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096072-w-co |
High uniformity continuous LED backlights, 96x72 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-b |
High uniformity continuous LED backlights, 96x108 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-b-co |
High uniformity continuous LED backlights, 96x108 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-g |
High uniformity continuous LED backlights, 96x108 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-g-co |
High uniformity continuous LED backlights, 96x108 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-ir860 |
High uniformity continuous LED backlights, 96x108 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-r |
High uniformity continuous LED backlights, 96x108 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-r-co |
High uniformity continuous LED backlights, 96x108 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-w |
High uniformity continuous LED backlights, 96x108 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096108-w-co |
High uniformity continuous LED backlights, 96x108 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-b |
High uniformity continuous LED backlights, 96x144 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-b-co |
High uniformity continuous LED backlights, 96x144 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-g |
High uniformity continuous LED backlights, 96x144 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-g-co |
High uniformity continuous LED backlights, 96x144 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-ir860 |
High uniformity continuous LED backlights, 96x144 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-r |
High uniformity continuous LED backlights, 96x144 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-r-co |
High uniformity continuous LED backlights, 96x144 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-w |
High uniformity continuous LED backlights, 96x144 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096144-w-co |
High uniformity continuous LED backlights, 96x144 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-b |
High uniformity continuous LED backlights, 96x180 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-b-co |
High uniformity continuous LED backlights, 96x180 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-g |
High uniformity continuous LED backlights, 96x180 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-g-co |
High uniformity continuous LED backlights, 96x180 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-ir860 |
High uniformity continuous LED backlights, 96x180 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-r |
High uniformity continuous LED backlights, 96x180 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-r-co |
High uniformity continuous LED backlights, 96x180 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-w |
High uniformity continuous LED backlights, 96x180 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096180-w-co |
High uniformity continuous LED backlights, 96x180 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-b |
High uniformity continuous LED backlights, 96x216 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-b-co |
High uniformity continuous LED backlights, 96x216 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-g |
High uniformity continuous LED backlights, 96x216 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-g-co |
High uniformity continuous LED backlights, 96x216 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-ir860 |
High uniformity continuous LED backlights, 96x216 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-r |
High uniformity continuous LED backlights, 96x216 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-r-co |
High uniformity continuous LED backlights, 96x216 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-w |
High uniformity continuous LED backlights, 96x216 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc096216-w-co |
High uniformity continuous LED backlights, 96x216 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-b |
High uniformity continuous LED backlights, 144x36 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-b-co |
High uniformity continuous LED backlights, 144x36 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-g |
High uniformity continuous LED backlights, 144x36 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-g-co |
High uniformity continuous LED backlights, 144x36 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-ir860 |
High uniformity continuous LED backlights, 144x36 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-r |
High uniformity continuous LED backlights, 144x36 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-r-co |
High uniformity continuous LED backlights, 144x36 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-w |
High uniformity continuous LED backlights, 144x36 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144036-w-co |
High uniformity continuous LED backlights, 144x36 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-b |
High uniformity continuous LED backlights, 144x72 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-b-co |
High uniformity continuous LED backlights, 144x72 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-g |
High uniformity continuous LED backlights, 144x72 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-g-co |
High uniformity continuous LED backlights, 144x72 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-ir860 |
High uniformity continuous LED backlights, 144x72 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-r |
High uniformity continuous LED backlights, 144x72 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-r-co |
High uniformity continuous LED backlights, 144x72 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-w |
High uniformity continuous LED backlights, 144x72 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144072-w-co |
High uniformity continuous LED backlights, 144x72 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-b |
High uniformity continuous LED backlights, 144x108 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-b-co |
High uniformity continuous LED backlights, 144x108 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-g |
High uniformity continuous LED backlights, 144x108 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-g-co |
High uniformity continuous LED backlights, 144x108 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-ir860 |
High uniformity continuous LED backlights, 144x108 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-r |
High uniformity continuous LED backlights, 144x108 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-r-co |
High uniformity continuous LED backlights, 144x108 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-w |
High uniformity continuous LED backlights, 144x108 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144108-w-co |
High uniformity continuous LED backlights, 144x108 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-b |
High uniformity continuous LED backlights, 144x144 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-b-co |
High uniformity continuous LED backlights, 144x144 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-g |
High uniformity continuous LED backlights, 144x144 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-g-co |
High uniformity continuous LED backlights, 144x144 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-ir860 |
High uniformity continuous LED backlights, 144x144 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-r |
High uniformity continuous LED backlights, 144x144 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-r-co |
High uniformity continuous LED backlights, 144x144 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-w |
High uniformity continuous LED backlights, 144x144 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144144-w-co |
High uniformity continuous LED backlights, 144x144 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-b |
High uniformity continuous LED backlights, 144x180 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-b-co |
High uniformity continuous LED backlights, 144x180 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-g |
High uniformity continuous LED backlights, 144x180 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-g-co |
High uniformity continuous LED backlights, 144x180 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-ir860 |
High uniformity continuous LED backlights, 144x180 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-r |
High uniformity continuous LED backlights, 144x180 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-r-co |
High uniformity continuous LED backlights, 144x180 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-w |
High uniformity continuous LED backlights, 144x180 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144180-w-co |
High uniformity continuous LED backlights, 144x180 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-b |
High uniformity continuous LED backlights, 144x216 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-b-co |
High uniformity continuous LED backlights, 144x216 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-g |
High uniformity continuous LED backlights, 144x216 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-g-co |
High uniformity continuous LED backlights, 144x216 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-ir860 |
High uniformity continuous LED backlights, 144x216 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-r |
High uniformity continuous LED backlights, 144x216 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-r-co |
High uniformity continuous LED backlights, 144x216 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-w |
High uniformity continuous LED backlights, 144x216 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc144216-w-co |
High uniformity continuous LED backlights, 144x216 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-b |
High uniformity continuous LED backlights, 192x36 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-b-co |
High uniformity continuous LED backlights, 192x36 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-g |
High uniformity continuous LED backlights, 192x36 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-g-co |
High uniformity continuous LED backlights, 192x36 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-ir860 |
High uniformity continuous LED backlights, 192x36 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-r |
High uniformity continuous LED backlights, 192x36 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-r-co |
High uniformity continuous LED backlights, 192x36 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-w |
High uniformity continuous LED backlights, 192x36 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192036-w-co |
High uniformity continuous LED backlights, 192x36 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-b |
High uniformity continuous LED backlights, 192x72 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-b-co |
High uniformity continuous LED backlights, 192x72 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-g |
High uniformity continuous LED backlights, 192x72 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-g-co |
High uniformity continuous LED backlights, 192x72 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-r |
High uniformity continuous LED backlights, 192x72 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-r-co |
High uniformity continuous LED backlights, 192x72 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-w |
High uniformity continuous LED backlights, 192x72 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192072-w-co |
High uniformity continuous LED backlights, 192x72 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-b |
High uniformity continuous LED backlights, 192x108 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-b-co |
High uniformity continuous LED backlights, 192x108 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-g |
High uniformity continuous LED backlights, 192x108 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-g-co |
High uniformity continuous LED backlights, 192x108 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-r |
High uniformity continuous LED backlights, 192x108 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-r-co |
High uniformity continuous LED backlights, 192x108 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-w |
High uniformity continuous LED backlights, 192x108 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192108-w-co |
High uniformity continuous LED backlights, 192x108 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-b |
High uniformity continuous LED backlights, 192x144 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-b-co |
High uniformity continuous LED backlights, 192x144 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-g |
High uniformity continuous LED backlights, 192x144 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-g-co |
High uniformity continuous LED backlights, 192x144 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-ir860 |
High uniformity continuous LED backlights, 192x144 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-r |
High uniformity continuous LED backlights, 192x144 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-r-co |
High uniformity continuous LED backlights, 192x144 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-w |
High uniformity continuous LED backlights, 192x144 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192144-w-co |
High uniformity continuous LED backlights, 192x144 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-b |
High uniformity continuous LED backlights, 192x180 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-b-co |
High uniformity continuous LED backlights, 192x180 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-g |
High uniformity continuous LED backlights, 192x180 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-g-co |
High uniformity continuous LED backlights, 192x180 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-ir860 |
High uniformity continuous LED backlights, 192x180 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-r |
High uniformity continuous LED backlights, 192x180 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-r-co |
High uniformity continuous LED backlights, 192x180 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-w |
High uniformity continuous LED backlights, 192x180 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192180-w-co |
High uniformity continuous LED backlights, 192x180 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-b |
High uniformity continuous LED backlights, 192x216 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-b-co |
High uniformity continuous LED backlights, 192x216 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-g |
High uniformity continuous LED backlights, 192x216 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-g-co |
High uniformity continuous LED backlights, 192x216 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-ir860 |
High uniformity continuous LED backlights, 192x216 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-r |
High uniformity continuous LED backlights, 192x216 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-r-co |
High uniformity continuous LED backlights, 192x216 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-w |
High uniformity continuous LED backlights, 192x216 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc192216-w-co |
High uniformity continuous LED backlights, 192x216 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-b |
High uniformity continuous LED backlights, 240x36 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-b-co |
High uniformity continuous LED backlights, 240x36 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-g |
High uniformity continuous LED backlights, 240x36 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-g-co |
High uniformity continuous LED backlights, 240x36 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-ir860 |
High uniformity continuous LED backlights, 240x36 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-r |
High uniformity continuous LED backlights, 240x36 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-r-co |
High uniformity continuous LED backlights, 240x36 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-w |
High uniformity continuous LED backlights, 240x36 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240036-w-co |
High uniformity continuous LED backlights, 240x36 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-b |
High uniformity continuous LED backlights, 240x72 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-b-co |
High uniformity continuous LED backlights, 240x72 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-g |
High uniformity continuous LED backlights, 240x72 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-g-co |
High uniformity continuous LED backlights, 240x72 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-ir860 |
High uniformity continuous LED backlights, 240x72 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-r |
High uniformity continuous LED backlights, 240x72 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-r-co |
High uniformity continuous LED backlights, 240x72 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-w |
High uniformity continuous LED backlights, 240x72 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240072-w-co |
High uniformity continuous LED backlights, 240x72 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-b |
High uniformity continuous LED backlights, 240x108 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-b-co |
High uniformity continuous LED backlights, 240x108 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-g |
High uniformity continuous LED backlights, 240x108 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-g-co |
High uniformity continuous LED backlights, 240x108 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-ir860 |
High uniformity continuous LED backlights, 240x108 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-r |
High uniformity continuous LED backlights, 240x108 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-r-co |
High uniformity continuous LED backlights, 240x108 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-w |
High uniformity continuous LED backlights, 240x108 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240108-w-co |
High uniformity continuous LED backlights, 240x108 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-b |
High uniformity continuous LED backlights, 240x144 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-b-co |
High uniformity continuous LED backlights, 240x144 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-g |
High uniformity continuous LED backlights, 240x144 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-g-co |
High uniformity continuous LED backlights, 240x144 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-ir860 |
High uniformity continuous LED backlights, 240x144 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-r |
High uniformity continuous LED backlights, 240x144 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-r-co |
High uniformity continuous LED backlights, 240x144 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-w |
High uniformity continuous LED backlights, 240x144 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240144-w-co |
High uniformity continuous LED backlights, 240x144 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-b |
High uniformity continuous LED backlights, 240x180 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-b-co |
High uniformity continuous LED backlights, 240x180 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-g |
High uniformity continuous LED backlights, 240x180 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-g-co |
High uniformity continuous LED backlights, 240x180 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-ir860 |
High uniformity continuous LED backlights, 240x180 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-r |
High uniformity continuous LED backlights, 240x180 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-r-co |
High uniformity continuous LED backlights, 240x180 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-w |
High uniformity continuous LED backlights, 240x180 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240180-w-co |
High uniformity continuous LED backlights, 240x180 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-b |
High uniformity continuous LED backlights, 240x216 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-b-co |
High uniformity continuous LED backlights, 240x216 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-g |
High uniformity continuous LED backlights, 240x216 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-g-co |
High uniformity continuous LED backlights, 240x216 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-ir860 |
High uniformity continuous LED backlights, 240x216 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-r |
High uniformity continuous LED backlights, 240x216 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-r-co |
High uniformity continuous LED backlights, 240x216 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-w |
High uniformity continuous LED backlights, 240x216 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc240216-w-co |
High uniformity continuous LED backlights, 240x216 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-b |
High uniformity continuous LED backlights, 288x36 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-b-co |
High uniformity continuous LED backlights, 288x36 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-g |
High uniformity continuous LED backlights, 288x36 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-g-co |
High uniformity continuous LED backlights, 288x36 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-ir860 |
High uniformity continuous LED backlights, 288x36 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-r |
High uniformity continuous LED backlights, 288x36 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-r-co |
High uniformity continuous LED backlights, 288x36 mm illumination area, red, 620 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-w |
High uniformity continuous LED backlights, 288x36 mm illumination area, white, > 4500 K
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288036-w-co |
High uniformity continuous LED backlights, 288x36 mm illumination area, white, > 4500 K, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288072-b |
High uniformity continuous LED backlights, 288x72 mm illumination area, blue, 470 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288072-b-co |
High uniformity continuous LED backlights, 288x72 mm illumination area, blue, 470 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288072-g |
High uniformity continuous LED backlights, 288x72 mm illumination area, green, 525 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288072-g-co |
High uniformity continuous LED backlights, 288x72 mm illumination area, green, 525 nm, with collimation film in both directions
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288072-ir860 |
High uniformity continuous LED backlights, 288x72 mm illumination area, IR, 860 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |
 Opto Engineering: lt2bc288072-r |
High uniformity continuous LED backlights, 288x72 mm illumination area, red, 620 nm
At emitting surface. Tolerance ± 10% At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz. |