Search

ltc-5231-90.jpg
Bosch: ltc-5231-90

Video Distribution Amplifier (1 Input, 4 Output)

The Bosch LTC 5231/90 Video Distribution Amplifier (1 Input, 4 Output) is a single-channel video distribution amplifier that provides video output on 4 ports. It offers a...

p30fa.jpg
Speco Technologies: p30fa

30 Watt PA Amplifier With Digital AM/FM Tuner
The Speco Technologies P30-FA professional 30 Watt PA amplifier features a digital 30 station preset FM/AM tuner, built-in telephone paging, voice activated priority paging, and...
Inputs    2 Mic Inputs: XLR Connectors, Hi or Lo Z, Balanced
1 Aux Input    RCA Connector, 1 Tel Paging, 1 Equalizer: 1/4" Audio
Outputs    4 & 8 Ohm, 25 & 70V line
Controls    2 Mic Controls,1-Aux Control, Separate Bass and Treble Controls Master Volume Control, Tuner Control,
Sensitivity    Mic 1mV, Aux 100mV, Tel 200mV/600 Ohm
101l.jpg
Kramer: 101l

1:1 Composite Video Line Amplifier
The 101-L is a high-performance line amplifier for composite video signals. The 101 L provides controls to compensate for signal loss inherent in long cable...
Input    1 Composite Video on A Bnc Connector, 1vpp/75Ω
Output    1 Composite Video on A Bnc Connector, 1vpp/75Ω
Max. Output Level    2.5vpp
Bandwidth    500mhz
Diff. Gain    0.03%
103av.jpg
Kramer: 103av

1:3 Composite Video & Stereo Audio Distribution Amplifier

The 103-AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. The 103 AVtakes one input, provides correct buffering and...

Inputs    1 Composite Video, 1Vpp/75Ω on an RCA Connector; 1 Unbalanced Stereo Audio, 1Vpp/33kΩ, on 3.5 Mm Mini Jack
Outputs    3 Composite Video, 1Vpp/75Ω on RCA Connectors; 3 Unbalanced Stereo Audio, 1Vpp/150Ω on 3.5mm Mini Jacks
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    320MHz
Audio Bandwidth (-3dB)    20kHz
104ln.jpg
Kramer: 104ln

1:4 Composite Video Differential Line Amplifier

The 104-LN is a high-performance line amplifier for composite or SDI video signals. The 104 LN includes differential circuitry to help eliminate noise often found...

Input    1 Video, Differential, 1Vpp/75Ω, on A BNC Connector
Outputs    4 Composite Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    1.6Vpp
Bandwidth (-3dB)    423MHz
Diff. Gain    0.22%
104r.jpg
Kramer: 104r

1:4 RF Distribution Amplifier

The 104-R is a high-performance distribution amplifier for RF signals. The 104 R takes one RF (CATV/MATV) signal and distributes it to four identical outputs.

Input    1 RF, 0.5Vpp/75Ω (max.) on an "F" type connector
Outputs    4 RF, 0.5Vpp/75Ω (max.) on "F" type connectors
Bandwidth    40MHz to 3000MHz ( /-3dB)
Coupling    AC
RF Gain    6dB typical across band
105a.jpg
Kramer: 105a

1:5 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

Input    1 unbalanced stereo/balanced mono, 1Vpp/33k#8486; on a 3.5mm mini jack
Outputs    5 unbalanced stereo/balanced mono, 1Vpp/50Ω on 3.5mm mini jacks
Max. Output    5Vpp
Audio Bandwidth (-3dB)    20kHz
S/N Ratio    80dB unweighted
105v.jpg
Kramer: 105v

1:5 Composite Video Distribution Amplifier

The 105-V is a high-performance distribution amplifier for composite video signals. The 105 V takes one input, provides correct buffering and isolation and...

Input    1 Video, 1Vpp/75Ω on an RCA Connector
Outputs    5 Video, 1Vpp/75Ω on RCA Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    400MHz
Diff. Gain    0.1%
105vb.jpg
Kramer: 105vb

1:5 Composite Video Distribution Amplifier

The 105-VB is a high-performance distribution amplifier for composite video signals. The 105 VB takes one input, provides correct buffering and isolation and...

Input    1 Composite Video, 1Vpp/75Ω on A BNC Connector
Outputs    5 Composite Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    400MHz
Diff. Gain    0.1%
106.jpg
Kramer: 106

1:2 Microphone Line & Distribution Amplifier

The 106 is a high-quality distribution amplifier for balanced mono microphone signals. The 106 takes one dynamic or condenser microphone input and distributes the...

input    1 balanced mono microphone on a 3-pin terminal block connector
Outputs    2 balanced mono line outputs on 3-pin terminal block connectors
Max. Output Level    27Vpp (22dBu)
Bandwidth    >40kHz
S/N Ratio    81dB
123vxl.jpg
Kramer: 123vxl

1:3 Composite Video Differential Line Amplifier

The 123-Vxl is a high-performance line amplifier for composite or SDI video signals. The 123 Vxl includes controls and circuitry to compensate for signal losses...

Input    1 Looping Video, Differential, 1Vpp/75Ω on A BNC Connector
Outputs    3 Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    1.7Vpp
Bandwidth (-3dB)    425MHz
Diff. Gain    0.5%
1t-da-462.jpg
TV One: 1t-da-462

RGBHV Distribution Amplifier

The TV One 1T-DA-462 RGBHV Distribution Amplifier provides 2 VGA type outputs plus Stereo Audio for use in any situation requiring multiple outputs from a single PC or other RGB...

Video Signal Type    RGBHV, RGBS, RGsB, YPbPr
Video Input Connector    1x HD-15 Female
R-G-B Level Range    0.5-2.0 Vp-p
Maximum Resolution    2560x1600
Audio Connector    1x 3.5mm Stereo Audio
1t-da-472.jpg
TV One: 1t-da-472

RGB/YPbPr And Stereo Audio Distribution Amplifier

The TV One 1T-DA-472 RGB/YPbPr and Stereo Audio Distribution Amplifiers provides two outputs for use in any situation requiring multiple Video and Stereo Audio outputs from a...

Video Signal Type    RGBHV, RGBS, RGsB, YPbPr
Video Input Connector    1x HD-15 Female R-G-B
Level Range    0.5-2.0 Vp-p
Maximum Resolution    2560x1600
Audio Input Connector    1x 3.5mm Stereo Audio
1t-da-474.jpg
TV One: 1t-da-474

RGB/YPbPr And Stereo Audio Distribution Amplifier
The TV One 1T DA 474 RGB/YPbPr and Stereo Audio Distribution Amplifier provides four outputs for use in any situation requiring multiple Video and Stereo Audio outputs from a single...
Video Signal Type    RGBHV, RGBS, RGsB, YPbPr
Video Input Connector    1x HD-15 Female R-G-B
Level Range    0.5-2.0 Vp-p
Maximum Resolution    2560x1600
Audio Input Connector    1x 3.5mm Stereo Audio
1t-da-552.jpg
TV One: 1t-da-552

DVI Distribution Amplifier

The TV One 1T-DA-552 DVI-D Distribution Amplifier provides multiple outputs from a single DVI input for distribution to devices capable of receiving and/or displaying such...

Video Inputs    1x DVI-D via DVI-I Connector
Video Output    2x DVI-D via DVI-I Connectors
Freq. Bandwidth    2.25Gbps (HDMI Single Link)
Color Depth    10/12 bit Color Depth Display
PC/DVI resolutions    Up to 1920x1200
1t-da-554.jpg
TV One: 1t-da-554

DVI Distribution Amplifier

The TV One 1T-DA-554 DVI-D Distribution Amplifier provides multiple outputs from a single DVI input for distribution to devices capable of receiving and/or displaying such...

Video Inputs    1x DVI-D via DVI-I Connector
Video Output    4x DVI-D via DVI-I Connectors
Freq. Bandwidth    2.25Gbps (HDMI Single Link)
Color Depth    10/12 bit Color Depth Display
PC/DVI resolutions    Up to 1920x1200
1t-da-564.jpg
TV One: 1t-da-564

DVI Distribution Amplifier
The TV One 1T DA 564 DVI-D Distribution Amplifier provides multiple outputs from a single DVI input for distribution to devices capable of receiving and/or displaying such signals....
Video Inputs    1x DVI-D via DVI-I Connector
Video Output    4x DVI-D via DVI-I Connectors
Audio Input/Output Format    Analog Stereo and S/PDIF
Analog Stereo In    1x via Stereo 3.5mm Mini Stereo
Analog Stereo Out    4x via Stereo 3.5mm Mini Stereo
1t-da-652.jpg
TV One: 1t-da-652

HDMI Distribution Amplifier
The TV One 1T DA 652 HDMI Distribution Amplifier provides 2 outputs from a single HDMI input for distribution to devices capable of receiving and/or displaying HDMI signals. The...
Video Inputs (HDMI)    1x via HDMI Connector
Video Output (HDMI)    2x via HDMI Connector
Freq. Bandwidth    2.25Gbps (HDMI Single Link)
Color Depth    10/12 bit Color Depth Display
PC/DVI resolutions    Up to 1920x1200
1t-da-654.jpg
TV One: 1t-da-654

HDMI Distribution Amplifier
The TV One 1T DA 654 HDMI Distribution Amplifier provides multiple outputs from a single HDMI input for distribution to devices capable of receiving and/or displaying such signals....
Video Inputs (HDMI)    1x via HDMI Connector
Video Output (HDMI)    4x via HDMI Connector
Freq. Bandwidth    2.25Gbps (HDMI Single Link)
Color Depth    10/12 bit Color Depth Display
PC/DVI resolutions    Up to 1920x1200
1t-da-658.jpg
TV One: 1t-da-658

HDMI Distribution Amplifier
The TV One 1T DA 658 HDMI Distribution Amplifier provides multiple outputs from a single HDMI input for distribution to devices capable of receiving and/or displaying such signals....
Video Inputs (HDMI)    1x via HDMI Connector
Video Output (HDMI)    8x via HDMI Connector
Freq. Bandwidth    2.25Gbps (HDMI Single Link)
Color Depth    10/12 bit Color Depth Display
PC/DVI resolutions    Up to 1920x1200
1t-da-664.jpg
TV One: 1t-da-664

HDMI Distribution Amplifier
The TV One 1T-DA-664 HDMI Distribution Amplifier provides multiple outputs from a single HDMI input for distribution to devices capable of receiving and/or displaying such signals....
Video Inputs (HDMI)    1x via HDMI Connector
Video Output (HDMI)    4x via HDMI Connector
Separate Audio    Format = Analog Stereo and S/PDIF; Analog Stereo In = 1x via Stereo 3.5mm Mini Stereo; Analog Stereo Out = 4x via Stereo 3.5mm Mini Stereo; S/PDIF In = 1x Via RCA Coaxial; S/PDIF Out = 4x Via RCA Coaxial; Audio Bandwidth = 20Hz to 20 KHz; Audio Impedance = 20KΩStereo, 75Ω S/PDIF; Audio Levels = Unity, Nominal, S/PDIF .5-1V p-p
Freq. Bandwidth    2.25Gbps (HDMI Single Link)
Color Depth    10/12 bit Color Depth Display
1t-da-672.jpg
TV One: 1t-da-672

1x2 HDMI v1.4 DA. Max Res 4Kx2K/30 Hz, 1080p 60 Hz

The TV One 1T-DA-672 1 x 2 4K HDMI Distribution Amplifier provides 2 independent HDMI outputs from a single...

1t-da-674.jpg
TV One: 1t-da-674

1x4 HDMI v1.4 DA. Max Res 4Kx2K/30 Hz, 1080p 60 Hz

The TV One 1T-DA-674 1 x 4 4K HDMI Distribution Amplifier provides 4 independent HDMI outputs from a single HDMI input for distribution to HDMI v1.4-compatible devices. This...

1t-da-678.jpg
TV One: 1t-da-678

1x8 HDMI v1.4 DA. Max Res 4Kx2K/30 Hz, 1080p 60 Hz

The Tv One 1T-DA-674 HDMI Distribution Amplifier  Provides 8 independent outputs from a single HDMI input for distribution to devices capable of receiving and/or...

1t-da-726.jpg
TV One: 1t-da-726

HD/SD-SDI Distribution Amplifier

The TV One 1T-DA-726 3G/HD/SD-SDI Distribution Amplifier provides 6 outputs from a single SDI input for distribution to devices capable of receiving and/or displaying such...

Video Inputs (3G/HD/SD-SDI)    1x via BNC Connector
Video Output (3G/HD/SD-SDI)    6x via BNC Connector
SDI Standards    3G/HD/SD-SDI
Data Rates    270 / 1483 / 1485 / 2970 Mbps
Video Bandwidths    2.97Gpbs & 2.97/1.001Gbps
1t-da8cvb.jpg
TV One: 1t-da8cvb

1T-DA8 Series Video Distribution Amplifier

The TV One 1T-DA8CVB Distribution Amplifier is a ultra compact, high quality product. The 1T-DA8CVB is a 1x8 DA for Composite Video with BNC connectors. The...

Video Bandwidth    100MHz
Video Outputs    8x Composite or S-Video (YC)
Video Input    1x Composite Video via BNC
Video Output    8x Composite Video via BNC
Bandwidth    100MHz, /-3db
1t-da8cvr.jpg
TV One: 1t-da8cvr

1T-DA8 Series Video Distribution Amplifier
The TV One 1T DA8CVR Distribution Amplifier is an ultra compact, high quality product. The 1TDA8CVR is a 1x8 DA for Composite Video with RCA connectors. The 100MHz...
Video Bandwidth    100MHz
Video Outputs    8x Composite or S-Video (YC)
Video Input    1x Composite Video via RCA
Video Output    8x Composite Video via RCA
Bandwidth    100MHz, /-3db
1t-da8sv.jpg
TV One: 1t-da8sv

1T-DA8 Series Video Distribution Amplifier
The TV One 1T DA8SV Distribution Amplifiers are ultra compact, high quality products. The 1T-DA8CVB is a 1x8 DA for Composite Video with BNC connectors, the 1T-DA8CVR is a 1x8 DA for...
Video Bandwidth    100MHz
Video Outputs    8x Composite or S-Video (YC)
Video Input    1x S-Video via 4-Pin Mini-DIN
Video Output    8x S-Video via 4-Pin Mini-DIN
Bandwidth    100MHz, /-3db
1t-dvi-rh.jpg
TV One: 1t-dvi-rh

DVI Repeater With HDCP
The TV One 1T DVI RH Repeater is an ultra compact, high performance product designed to meet the most demanding requirements for DVI signal amplification. The...
Maximum Distance    12 meters (40’) (Note 1)
Maximum Cascade    3 Units (Note 1)
Maximum Pixel Rate    165MHz
Maximum Resolution    1600x1200@60Hz, 1080p
I/O Connectors    DVI-I Female
1t-vga-412.jpg
TV One: 1t-vga-412

RGBHV Distribution Amplifier

The TV One 1T-VGA-412 Distribution Amplifier provides 2 outputs for use in any situation requiring multiple outputs from a single PC or other RGB video source. Its video bandwidth...

Video Input Signal Type    RGBHV, RGBS, RGsB, YPbPr
Video Connector    1x HD-15 Female
R-G-B Level Range    0.5-2.0 Vp-p
Maximum Resolution    2560x1600
Video Outputs    2x via HD-15 Female Connectors
1t-vga-414.jpg
TV One: 1t-vga-414

RGBHV Distribution Amplifier
The TV One 1T VGA 414 RGBHV Distribution Amplifier provides 4 outputs for use in any situation requiring multiple outputs from a single PC or other RGB video source. Its video...
Video Input Signal Type    RGBHV, RGBS, RGsB, YPbPr
Video Connector    1x HD-15 Female
R-G-B Level Range    0.5-2.0 Vp-p
Maximum Resolution    2560x1600
Video Outputs    4x via HD-15 Female Connectors
4x4a.jpg
Kramer: 4x4a

4x1:4 Stereo Audio Switcher
The 4x4-A is a high-performance switcher for stereo audio signals. The 4x4 A switches any one of four input signals simultaneously to four identical outputs.
Inputs    4 unbalanced stereo audio, 1Vpp/33kΩ on 3.5mm mini jacks
Outputs    4 unbalanced stereo audio, 1Vpp/220Ω typical on 3.5mm mini jacks
Max Output Level    5.2Vpp ( 7dBu)
Audio Bandwidth (-3dB)    100kHz
S/N Ratio    90dB
6505.jpg
Kramer: 6505

1:5 S/PDIF Distribution Amplifier

The 6505 is a high-performance distribution amplifier for S/PDIF digital audio signals. The 6505 takes one S/PDIF input and distributes the signal to five...

Input    1 S/PDIF digital audio input on an RCA connector
Outputs    5 S/PDIF digital audio outputs on RCA connectors
Standards    CP1201, IEC-60958, AES-3id and S/PDIF
Sample Rate    32kHz to 192kHz
Input Impedance    75Ω
900n.jpg
Kramer: 900n

Stereo Power Amplifier (8.4 Watts Per Channel)

The 900-N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. With the 900 N, either input can deliver a speaker output of 8.4...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector
Output    1 stereo loudspeaker output on a 4-pin terminal block connector
Output Power    8.4W RMS per channel into a 4Ω load
Output Music Power    35W RMS per channel into a 4Ω load
Bandwidth (-3dB)    24kHz
900xl.jpg
Kramer: 900xl

Stereo Audio Power Amplifier

The 900-xl is a high-performance power amplifier for line level stereo audio signals. The 900 xl accepts unbalanced audio signals on either of two RCA or 3.5mm...

Inputs    1 unbalanced stereo audio on a 3.5mm mini jack connector; 1 unbalanced stereo audio on RCA connectors
Output    1 stereo differential speaker output
Output Power    2x10W (4Ω)
Input Sensitivity    460mV
Output Music Power    2x40W (4Ω)
901.jpg
Kramer: 901

2x1 Personal Stereo Audio Power Amplifier & Switcher

The 901 is a high-performance integrated personal stereo amplifier for unbalanced stereo signals. The 901 accepts a stereo audio signal and delivers a speaker...

Inputs    1 unbalanced stereo audio, 1Vpp/50Ω on RCA connectors; 1 mono microphone, 5mV/3.2Ω (condenser) 4.8Ω (dynamic) with a type selector, on a 6.5mm phone jack
Outputs    Unbalanced stereo audio 2W/4Ω per channel on both 3.5mm mini jack and 4-pole detachable terminal block speaker output
Max. Output Level    8Vpp at Hi-Z load (headphones)
Bandwidth (-3dB)    37kHz
S/N Ratio    74dB
903.jpg
Kramer: 903

4x1 Personal Stereo Audio Amplifier & Switcher (10W/Channel)

The 903 is a high-performance integrated personal amplifier for unbalanced stereo audio signals. The 903 allows selection between four inputs and delivers a...

Inputs    1 unbalanced stereo audio 1Vpp/50Ω on a 3.5mm mini jack; 3 unbalanced stereo audio 1Vpp/50Ω on RCA connectors
Outputs    Stereo headphone on a 6.5mm connector; loudspeakers on a terminal block connector; automatic switching when a headphone is plugged in
Output Power    2x10W (4Ω)
Output Music Power    2x40W (4Ω)
Bandwidth (-3dB)    20kHz
906.jpg
Kramer: 906

2x1 Stereo Audio Amplifier & Switcher (6.8 Watts Per Channel)

The 906 is a high-performance controllable power amplifier for line-level stereo audio signals. The 906 accepts either an unbalanced stereo audio signal on RCA...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
Outputs    1 speaker stereo audio on a 4-pin terminal block connector
Output Power    2 x 5.3W per channel into 8Ω; 2 x 6.8W per channel into 4Ω
Output Music Power    2 x 22W per channel into 8Ω; 2 x 28W per channel into 4Ω
Bandwidth (-3dB)    32.5kHz
907.jpg
Kramer: 907

Stereo Audio Power Amplifier (40 Watts Per Channel)

The 907 is a high-performance power amplifier for line-level stereo audio signals. The 907 accepts a balanced stereo audio signal on a terminal block connector...

Input    1 balanced stereo audio on a terminal block connector
Output    1 balanced stereo audio (speakers) on a terminal block connector
Output Power    40 watts per channel into 8Ω
Output Music Power    150W per channel into 8Ω
Input Sensitivity    1.2Vrms
907xl.jpg
Kramer: 907xl

Stereo Power Amplifier

The 907xl is a high−performance power amplifier for line−level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an...

908.jpg
Kramer: 908

Stereo Audio Amplifier & Switcher (40 Watts Per Channel)

The 908 is a high-performance audio amplifier for line-level stereo audio signals. The 908 accepts either a balanced or unbalanced stereo audio signal and...

Inputs    1 unbalanced stereo audio on RCA connectors; 1 balanced stereo audio on a 5-pin terminal block connector; 1 USB connector
Output    1 speaker stereo audio on a 4-pin terminal block connector
Input Sensitivity    Unbalanced: 360mVpp; balanced: 220mVpp
Max. Voltage Gain    Unbalanced: 35dB; balanced: 40.5dB
Output Power    40W per channel into 8Ω
912.jpg
Kramer: 912

Stereo Audio Power Amplifier

The 912 is a high−performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 8.4 watts RMS power per channel...

a-2240.jpg
TOA: a-2240

Mixer/Amp 5-Input (Mic, Line, Tel), 240W, Paging priority Mute

TOA A-2240 MIXER/POWER AMPLIFIER offers versatile features and outstanding value for installed sound applications such as schools, offices, restaurants, shops, factories, houses...

a-903mk2.jpg
TOA: a-903mk2

Mixer/Amplifier, Modular, 30 W, 8 Module Ports, Black (2U)

The TOA A-903MK2 are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical - such as in paging and...

a-9060dhm2.jpg
TOA: a-9060dhm2

Modular Digital Matrix Mixer/Amplifier, Up to 8 Mic/Line Inputs and 6 Line Outputs

The TOA A-9060DHM2 Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as...

a-9120dhm2.jpg
TOA: a-9120dhm2

Modular Digital Mixer/Amplifier (2 x 120W @ 70V)

The A-9120DHM2 Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as...

a-9240shm2.jpg
TOA: a-9240shm2

Modular Digital Matrix Mixer/Amplifier, Up to 8 Mic/Line Inputs/7 Line Outputs

The A-9240SHM2 Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as...

av-20d.jpg
TOA: av-20d

Class D Micro Plenum-rated (UL2043) power amp

The black AV-20D Micro Amplifier from TOA Electronics is a 2 channel digital amplifier for speech and general announcement. It introduces a new standard in small amperes for...

av-60s-am.jpg
TOA: av-60s-am

Single-Channel Micro Install Amplifier

The Toa Electronics AV-60S-AM is a single-channel digital amplifier for speech and general announcement. This compact amplifier is equipped with a switching power supply circuit,...

ba-235.jpg
TOA: ba-235

Power Amplifier, 35W, Line Input. Remote Volume, Black.

The TOA BA-235 Amplifier provides 35 watts of power to 4 ohm, 25 & 70V speakers in installed sound applications. The amplifier features a line input, volume control and recessed...

be33.jpg
Ensemble Designs: be-33

BrightEye 33 Analog Audio Distribution Amplifier

BrightEye 33 is a high performance audio distribution amplifier for the broadcast and recording industry. Exceptional performance features include excellent response, noise and...

be40.jpg
Ensemble Designs: be-40

BrightEye 40 SDI Reclocking Distribution Amplifier

BrightEye 40 is a reclocking serial digital video distribution amplifier with four outputs. The SDI input will automatically equalize up to 300 meters (1000 feet) of digital...

be41.jpg
Ensemble Designs: be-41

BrightEye 41 Analog Video/AES/Tri-Level Sync Distribution Amplifier

BrightEye 41 is a distribution amplifier that accepts analog video, AES digital audio, or Tri-Level Sync signal. It can also be used with SMPTE 310M, Dolby E and AC-3 signals. It...

be42.jpg
Ensemble Designs: be-42

BrightEye 42 HD/SD/ASI Distribution Amplifier

BrightEye 42 is a reclocking distribution amplifier that can be used with high definition, standard definition or ASI signals. When used with SD or ASI input signals, the serial...

be43.jpg
Ensemble Designs: be-43

BrightEye 43 3G/HD/SD/ASI Distribution Amplifier

BrightEye 43 is a reclocking distribution amplifier that can be used with standard definition video signals, 3 Gb/s and 1.5 Gb/s high definition signals, or ASI signals. The...

bg-2035.jpg
TOA: bg-2035

5-Input Mixer-Amp 35W (4Ohm/25V/70V). Option Module Slot works with 900 Series Modules.

The Toa BG-2035 Mixer Amplifier is designed to operate as the front end to any commercial audio system in background music (BGM), foreground music, paging applications and more....

cd8-a.jpg
Costar: cd8-a

Code Distribution Amplifier, 8 channel , RS-485

The  CD8-A code distribution repeats and extends single telemetry to 8 isolated and buffered telemetry through each port (RS-485). In case of isolated RS-485 telemetry, the code...

cp3000s.jpg
Electro Voice: cp3000s

1600 W Per Channel Class-H Power Amplifier

The transmission qualities of Electro-Voice CP3000S power amps are simply extraordinary. The new switching power supply technology, completely designed from scratch and the...

Load Impedance    2 ohms, 4 ohms, 8 ohms
Maximum Midband Output Power - THD = 1%, 1kHz, Dual Channel    2 ohms: 1600 W; 4 ohms: 1100 W; 8 ohms: 600 W
Rated Output Power - THD < 0.1%, 20Hz ... 20kHz    2 ohms: -; 4 ohms: 900 W; 8 ohms: 450 W
Max. Single Channel Output Power - Dynamic-Headroom, IHF-A    2 ohms: 2600 W; 4 ohms: 1400 W; 8 ohms: 720 W
Max. Single Channel Output Power - Continuous, 1kHz    2 ohms: 2100 W; 4 ohms: 1300 W; 8 ohms: 660 W
cp4000s.jpg
Electro Voice: cp4000s

2100 W Per Channel Class-H Power Amplifier

The transmission qualities of Electro-Voice CP4000S power amps are simply extraordinary. The new switching power supply technology, completely designed from scratch and the...

Load Impedance    2 ohms, 4 ohms, 8 ohms
Maximum Midband Output Power - THD = 1%, 1kHz, Dual Channel    2 ohms: 2100 W; 4 ohms: 1500 W; 8 ohms: 900 W
Rated Output Power - THD < 0.1%, 20Hz ... 20kHz    2 ohms: -; 4 ohms: 1200 W; 8 ohms: 600 W
Max. Single Channel Output Power - Dynamic-Headroom, IHF-A    2 ohms: 2900 W; 4 ohms: 1800 W; 8 ohms: 1000 W
Max. Single Channel Output Power - Continuous, 1kHz    2 ohms: 2600 W; 4 ohms: 1700 W; 8 ohms: 950 W
cps 2.12 mk ii.jpg
Electro Voice: cps2-12-mk-ii

Contractor Precision Series Class-H Power Amplifier

Designed for the contractor, the Electro-Voice CPS 2.12 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on...

Amplifier Gain    32 dB
Analog Inputs    2, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω    1800 Watts
cps 2.6 mk ii.jpg
Electro Voice: cps2-6-mk-ii

Contractor Precision Series Class-H Power Amplifier

Designed for the contractor, the Electro-Voice CPS2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on...

Amplifier Gain    32 dB
Analog Inputs    2, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω    900 Watts
cps 2.9 mk ii.jpg
Electro Voice: cps29-mk-ii

Contractor Precision Series Class-H Power Amplifier

Designed for the contractor, the Electro-Voice CPS 2.9 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on...

Amplifier Gain    32 dB
Analog Inputs    2, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω    1250 Watts
cps 4.10.jpg
Electro Voice: cps-4-10

1000 W Per Channel 4-channel Amplifier

The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation....

Amplifier Gain    32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs    4, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v    1000 Watts
cps 4.5.jpg
Electro Voice: cps-4-5

500 W Per Channel 4-channel Amplifier

The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation....

Amplifier Gain    32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs    4, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v    500 Watts
cps 8.5.jpg
Electro Voice: cps-8-5

500 W Per Channel 8-channel Amplifier

The Electro-Voice Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation....

Amplifier Gain    32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs    8, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v    500 Watts
cps2.4-mkii
Electro Voice: cps2-4-mk-ii

Contractor Precision Series Class-H Power Amplifier

Designed for the contractor, the Electro-Voice CPS-2.4MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on...

Amplifier Gain    32 dB
Analog Inputs    2, electronically balanced, Phoenix-type
Audio Network    No
CAN Bus Interface    Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω    650 Watts
da-250d.jpg
TOA: da-250d

Digital Power Amplifier, 2x 250 W @ 4 Ohm (2x 170 W @ 8 Ohm), 1x 500 W Bridged @ 8 Ohm (1U)

The DA-250D from Toa Electronics is a high-quality 1RU digital amplifier designed for installed applications. It offers two channels of input and output, with removable terminal...

da-500f-hl.jpg
TOA: da-500f-hl

Digital Power Amplifier, 4x 500 W @ 70V (4x 550 W @ 8 ohms), 2x 1000 W Bridged @ 140V (2U)

The DA-550F-HL from TOA Electronics is a high-quality, rack mountable four-channel digital amplifier. Designed for highly efficient operation, the DA-550F-HL is capable of...

irr-40p.jpg
Azden: irr-40p

2-Channel Infrared Receiver with Amplifier

The Azden IRR-40P 2-Channel Infrared Receiver is designed for use with Azden IR (Infrared) wireless transmitters (sold separately). The IRR-40P features a built-in amplifier with...

lectrosonics pa8.jpg
Lectrosonics: lectrosonics-pa8

8-Channel Power Amplifier

The Lectrosonics PA8 is an eight-channel, single rack space amplifier ideal for zoned, distributed loudspeaker systems. It has eight separate amplifiers within the chassis, each...

m-9000m2.jpg
TOA: m-9000m2

Modular Digital Matrix Mixer, Up to 8 Mic/Line Inputs, Digital Signal Processor

The M-9000M2 Pre-Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as...

p-9060dh.jpg
TOA: p-9060dh

Power Amplifier, 2Ch, 60W, 70V

The P-9060DH 60w 2 Channel Power Amplifier @ 70V from Toa Electronics is a high-performance digital amplifier designed for installed applications. This dual rack space unit can be...

p-9120dh.jpg
TOA: p-9120dh

Power Amplifier, 2Ch,120W, 70 V

The P-9120DH 120w 2 Channel Power Amplifier @ 70V from Toa Electronics is a high-performance digital amplifier designed for installed applications. This dual rack space unit can...

p1200rl.jpg
Electro Voice: p1200rl

850 W Per Channel Remote Control Amplifier
The Electro-Voice P-1200RL is a universal with 2 x 600 watts into 4 ohms and 2 x 850 watts into 2 Ohms. The P 1200RL Loudspeaker ouputs on barrier strip.
Amplifier Gain    30 dB
Connector Type    Barrier strip
Continuous Rated Power (1 kHz, THD 1%) 2Ω    850 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    600 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    380 Watts
p1200rt.jpg
Electro Voice: p1200rt

590 W Per Channel Remote Control Amplifier
The Electro-Voice P-1200RT High-impedance output for 100/70V-lines with 2 x 590 watts. The dynamic limiter circuit includes the output transformer and limits THD to 1% maximum. The...
Connector Type    Barrier strip
Continuous Rated Power (1 kHz, THD 1%) 100v    590 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v    580 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v    500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v    500 Watts
p120facd.jpg
Speco Technologies: p120facd

120 Watt P.A. Amplifier With FM Tuner & MP3-Ready CD Player
Speco Technologies P120 FACD UL Listed Amplifier is designed as a perfect solution for commercial applications where power, reliability, functionality and performance are essential....
Built-in equalizer    3 band in inputs, 2 band master
p240facd.jpg
Speco Technologies: p240facd

240 Watt P.A. Amplifier With FM Tuner & MP3-Ready CD Player
Speco Technologies P240 FACD UL Listed Amplifier is designed as a perfect solution for commercial applications where power, reliability, functionality and performance are essential....
Built-in equalizer    3 band in inputs, 2 band master
p3000rl.jpg
Electro Voice: p3000rl

1800 W Per Channel Remote Control Amplifier
The Electro-Voice P-3000RL is a flagship, with 2 x 1300 watts into 4 ohms and 2 x 1800 watts into 2 ohms, the digital controlled version of the legendary P3000 amplifier. The...
Amplifier Gain    34 dB
Connector Type    Speakon NL4
Continuous Rated Power (1 kHz, THD 1%) 2Ω    1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    1300 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    850 Watts
p60facd.jpg
Speco Technologies: p60facd

60 Watt PA Amplifier With FM/AM Tuner And MP3 Ready CD Player
The Speco Technologies P60 FACD is UL Listed Amplifier is designed as a perfect solution for commercial applications where power, reliability, functionality and performance are...
Rackmounting kit available (sold separately)    PBMRK2
pa1250t.jpg
Electro Voice: pa1250t

Single-channel 250 W Power Amplifier

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where...

Continuous Rated Power (1 kHz, THD 1%) 100v    270 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v    270 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v    250 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v    250 Watts
DIM 30    0.1 %
pa2250t.jpg
Electro Voice: pa2250t

Dual 250 W Per Channel Power Amplifier

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where...

Amplifier Gain    34.3 dB
Continuous Rated Power (1 kHz, THD 1%) 100v    270 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    270 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v    270 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    135 Watts
pa2400t.jpg
Electro Voice: pa2400t

Dual 400 W Per Channel Power Amplifier

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where...

Amplifier Gain    34 dB
Continuous Rated Power (1 kHz, THD 1%) 100v    430 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    430 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v    430 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    215 Watts
pa2450l.jpg
Electro Voice: pa2450l

Dual 450 W Per Channel Power Amplifier

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where...

Amplifier Gain    34.3 dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω    450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    220 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    400 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω    200 Watts
pa4150l.jpg
Electro Voice: pa4150l

Quad 150 W Per Channel Power Amplifier

The Electro-Voice PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where...

Amplifier Gain    30 dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω    160 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    150 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω    75 Watts
pat20tb.jpg
Speco Technologies: pat20tb

20 Watt Mobile Amplifier With Two-Way Communication
Speco Technologies PAT 20TB talk-back DC mobile amplifier delivers an amplified sound system suitable for any motor vehicle and/or nautical application. The ...
Power Output    20 Watts
Output Impedance    4 or 8 Ohms
Frequency Response    50Hz-20kHZ
Auxiliary Audio Jack Input    200mV / 50K ohms
Mic Input    2mV / 5K ohms
pbm120.jpg
Speco Technologies: pbm120

120 Watts RMS P.A. Amplifier
Speco Technologies PBM 120 UL Listed Contractor Series amplifiers are the ideal amplifiers for everyday use. The PBM -120 can stand on its own as part of a smaller...
Dimensions    17” x 3.75” x 11.25”
Rackmounting kit available (sold separately)    PBMRK2
pbm30.jpg
Speco Technologies: pbm30

30W Contractor Series PA Amplifier
The Speco Technologies PBM 30two channel contractor series mixer/amplifier is a 30 watt amplifier. The PBM-30 features an auto mute function, music on hold...
Rackmounting kit available (sold separately)    PBMRK1
pl200m.jpg
Speco Technologies: pl200m

Multi-source/Multi-zone Matrix Distribution P.A. Amplifier
The Speco Technologies PL200-M is a multi-source multi-zone matrix distribution P.A. amplifier. Three of the inputs on the PL200 M feature a unique universal...
Inputs    3 XLR / ¼” combination inputs with phantom, mic or line level selection switch / 2 RCA inputs
Outputs    4 sets of 4/8/25V/70V outputs
Power Output    40W RMS per zone for 160W total
Power Supply    115V/60Hz
Frequency Response     60Hz – 17KHz /- 3Db
pl260a.jpg
Speco Technologies: pl260a

Seven Zone 260 Watt Commercial Amplifier
The Speco Technologies PL 260A has answered our customers’ requests for a high-wattage, premium amplifier to handle their most demanding large-scale applications. Our Platinum 260...
Rackmounting kit available (sold separately)    PBMRK2
pmm120a.jpg
Speco Technologies: pmm120a

120 Watt Public Address Mixer Power Amplifier
The Speco Technologies PMM 120A UL Listed Contractor Series amplifiers are the ideal amplifiers for everyday use. The PMM- 120A can stand on its own as part of a...
Rackmounting kit available (sold separately)    PBMRK2
pmm60a.jpg
Speco Technologies: pmm60a

60 Watt Public Address Mixer Power Amplifier
The Speco Technologies PMM 60A UL Listed Contractor Series amplifiers are the ideal amplifiers for everyday use. The PMM-60A can stand on its own as part of a...
Rack mounting kit available (sold separately)    PBMRK2
proamp.jpg
Crestron: proamp

Procise High-Definition Professional Surround Sound Amplifier

Professional quality 7-channel amplifiers offering tremendous power, control, and monitoring to complement the PSPHD PROCISE ® High-Definition Professional Surround Sound Processor.

Output Power    400 Watts per channel at 8 Ohms;
Power Bandwidth    5Hz to 45kHz -3dB
Frequency Response    20Hz to 20kHz ±0.1dB
THD    0.02%
IMD    0.05%
pt-102an.jpg
Kramer: pt-102an

1:2 Stereo Audio Distribution Amplifier

The 105-A is a high-performance distribution amplifier for unbalanced stereo audio signals. The 105 A takes one stereo input and distributes the signal to five...

Input    1 unbalanced stereo audio on a 3.5mm mini jack
Outputs    2 unbalanced stereo audio on 3.5mm mini jacks
Max. Output Level    5Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    85dB @1kHz
pt-102sn.jpg
Kramer: pt-102sn

1:2 S-Video Distribution Amplifier

The PT102SN is a high-performance video distribution amplifier for s-Video (Y/C) video signals. The PT 102SN takes one input, provides correct buffering and...

Input    1 s-Video on a 4-pin connector
Outputs    2 s-Video on 4-pin connectors
Max. Output level    1.3Vpp
Bandwidth (-3dB)    150MHz
Diff. Gain    0.05%
pt-102vn.jpg
Kramer: pt-102vn

1:2 Composite Video Distribution Amplifier

The PT102VN is a distribution amplifier for composite video or SDI signals. The PT 102VN takes one input, provides correct buffering and isolation and distributes...

Inputs    1 Video, 1Vpp/75Ω on A BNC Connector
Outputs    2 Video, 1Vpp/75Ω on BNC
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    430MHz
Diff. Gain    0.05%
pt-103v.jpg
Kramer: pt-103v

1:3 Composite Video Distribution Amplifier

The PT103V is a composite video distribution amplifier. The PT 103V takes one input, provides correct buffering and isolation and distributes the signal to three...

Input    1 Video, 1Vpp/75Ω on an RCA Connector
Outputs    3 Video, 1Vpp/75Ω on RCA Connectors
Max. Output Level    1.9Vpp
Bandwidth (-3dB)    407MHz
Diff. Gain    0.04%
q1212.jpg
Electro Voice: q1212

1800 W Per Channel Class-H Power Amplifier

Building on a legacy of power and performance, the Q1212 amps take Electro-Voice ’s unique amplifier philosophy to a new level of efficiency and value. The Q1212...

Amplifier Gain    32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω    1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    1200 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    750 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    1100 Watts
 q44-ii.jpg
Electro Voice: q44-ii

650 W Per Channel Power Amplifier

Building on a legacy of power and performance, Q44-II amps take Electro-Voice ’s unique amplifier philosophy to a new level of efficiency and value. The Q44-II...

Amplifier Gain    32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω    650 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    270 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    400 Watts
q66-ii.jpg
Electro Voice: q66-ii

900 W Per Channel Power Amplifier

Building on a legacy of power and performance, the Q66-II amps take Electro-Voice ’s unique amplifier philosophy to a new level of efficiency and value. The...

Amplifier Gain    32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω    900 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    600 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    380 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    500 Watts
q99.jpg
Electro Voice: q99

1250 W Per Channel Class-H Power Amplifier

Building on a legacy of power and performance, the Q99 amps take Electro-Voice ’s unique amplifier philosophy to a new level of efficiency and value. The Q99...

Amplifier Gain    32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω    1250 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    900 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    550 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω    800 Watts
s2-101aa.jpg
TV One: s2-101aa

Audio Power Amplifier
The TV One S2 101AA Audio Power Amplifier is a stereo audio power amplifier that provides 10 watts RMS per channel into a 4 ohm load when signals from a pre-amplified source are...
Unbalanced Audio Input    1x via 2x RCA (R/L) Connectors
Differential Audio Input (Bal./Unbal.)    1x via Terminals
PC Audio Input    1x via 3.5mm Mini-Stereo Jack
Nominal Input Level    353mVrms/Unbal,1.77Vrms/Bal
Input Sensitivity    848mVrms (-1.43dBV), Bal., 84mVrms (-19.4dBu), Unbal.
swampe-4.jpg
Crestron: swampe-4

Sonnex Multiroom Audio Expander 4-Zone Amplifier

The SWAMPE4 is a 4-zone expander for the Sonnex™ Multiroom Audio System (SWAMP-24X8) from Crestron ®. It adds 4 stereo amplified zones supporting full room control and...

Input Signal Types    Sonnex Link
Output Signal Types    Stereo speaker level
Typical of up to 4 amplified stereo zone outputs - Digital-To-Analog Conversion    24-bit 48 kHz
Typical of up to 4 amplified stereo zone outputs - Output Power    140 Watts per channel at 8 Ohms;
Typical of up to 4 amplified stereo zone outputs - Damping Factor    >200 @ 20 Hz
swampe-8.jpg
Crestron: swampe-8

Sonnex Multiroom Audio Expander 8-Zone Amplifier

The SWAMPE8 is an 8-zone expander for the Sonnex ™ Multiroom Audio System (SWAMP-24X8) from Crestron ®. It adds 8 stereo amplified zones supporting full room control and source...

Input Signal Types    Sonnex Link
Output Signal Types    Stereo speaker level
Typical of up to 8 amplified stereo zone outputs - Digital-To-Analog Conversion    24-bit 48 kHz
Typical of up to 8 amplified stereo zone outputs - Output Power    140 Watts per channel at 8 Ohms; 240 Watts per channel at 4 Ohms;
Typical of up to 8 amplified stereo zone outputs - Damping Factor    >200 @ 20 Hz
tg5.jpg
Electro Voice: tg5

2000 W per channel power amplifier

Designed for the most demanding applications in both touring and installed sound, Electro-Voice's ultra-reliable Tour Grade TG5 amplifiers offer a unique combination of output...

Amplifier Gain    39, 35, or 32 dB Switchable
Analog Inputs    Yes
Continuous Rated Power (1 kHz, THD 1%) 2Ω    2000 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    1450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    850 Watts
tg7.jpg
Electro Voice: tg7

3500 W Per Channel Power Amplifier

Designed for the most demanding applications in both touring and installed sound, Electro-Voice's ultra-reliable Tour Grade TG7 amplifiers offer a unique combination of output...

Amplifier Gain    41.5/35/32 dB Switchable
Analog Inputs    Yes
Continuous Rated Power (1 kHz, THD 1%) 2Ω    3500 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω    2500 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω    1500 Watts
totevision cv-400.jpg
ToteVision: totevision-cv-400

3G, HD/SD-SDI reclocking distribution amplifier

The ToteVision CV-400 is a reclocking active distribution amplifier designed to recover the embedded clock from a digital video signal when it is

tp-105hd.jpg
Kramer: tp-105hd

1:2 Twisted Pair Line Driver & Distribution Amplifier

The TP-105HD is a line driver and distribution amplifier for analog video over twisted pair signals. The TP 105HD takes a twisted pair input and distributes it to...

Input    1 RJ-45 connector
Outputs    2 RJ-45 connectors
Max Output Level    1.6Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain (PAIR)    1.2%
tp-112hd.jpg
Kramer: tp-112hd

1:2 Computer Graphics Video & HDTV Over Twisted Pair Transmitter & Distribution Amplifier

The TP-112HD is a twisted pair transmitter for computer graphics video and HDTV signals. The TP 112HD converts a computer graphics video or HDTV signal on a...

Input    1 XGA/HD on a 15-pin HD (F) connector
Outputs    2 twisted pair on RJ-45 connectors
Max. Output Level    1.7Vpp
Max. Resolution    WUXGA & 1080p
Diff. Gain    4%
tp-305a.jpg
Kramer: tp-305a

1:5 Computer Graphics Video, Audio & RS-232 Twisted Pair Receiver & Distribution Amplifier

The TP-305A is a high-performance twisted pair receiver for computer graphics video, audio and RS-232 signals. The TP 305A takes one twisted pair input and...

Input    1 LINE IN on an RJ-45 connector
Outputs    5 LINE OUT on RJ-45 connectors; 1 UXGA video output on a 15-pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack; 1 S/PDIF output on an RCA connector; 1 RS-232 on a 2-pin terminal block connector
Max. Output Level    Video: 1.6V; Audio: 2.3V
Power Outputs    12V DC, 0.5A max via each RJ-45 output (pins 4, 5)
Max. Resolution    WUXGA & 1080p
ufm230l.jpg
Lectrosonics: ufm230l

Inline Antenna Filter and Amplifier Module (470 - 692MHz)

The Lectrosonics UFM230L Inline Antenna Filter and Amplifier Module is a small, yet rugged device that installs between wireless receivers and antennas that are...

ufm50.jpg
Lectrosonics: ufm50

UHF FILTER/AMP MODULE, 50MHz BANDWIDTH

The Lectrosonics UFM50 is an in-line device designed to boost UHF Radio-Frequency gain up to 12dB. The UFM50 is an ideal solution to long antenna cable runs due to large venue...

v1516-amp.jpg
Vicon: v1516-amp

Video Output Amplifier Board

The Vicon V1516-AMP VIDEO AMPLIFIER BOARD has outputs for monitors 1-16.   This Amplifier Board is compatible with the Vicon V1599 Pilot Ulutra Series.

...

va-8xl,jpg
Kramer: va-8xl

8-Channel Balanced Stereo Audio Amplifier

The VA-8xl is a high-performance 8 channel-balanced stereo input volume controller for balanced audio signals on terminal block connectors. The volume of each L & R stereo channel...

Input    8 balanced stereo audio 4dBu/30kΩ on detachable terminal blocks
Output    8 balanced stereo audio 4dBu/50Ω on detachable terminal blocks
Gain    -95dB to 31dB
Max. Output Level    >20dBu balanced (THD N <0.01)
Bandwidth ( - 3dB)    20Hz to 40kHz
vm-100cb.jpg
Kramer: vm-100cb

1:10 Component Video Distribution Amplifier

The VM-100CB is a high-performance distribution amplifier for component video signals. The VM-100CB takes one input, provides correct buffering and isolation, and...

Input    1 component video (Y, Pb/Cb, Pr/Cr), looping on BNC connectors
Outputs    10 component video (Y, Pb/Cb, Pr/Cr) on BNC connectors
Max. Output level    2.2Vpp
Bandwidth (-3dB)    450MHz
Diff. Gain    0.03%
vm-1010.jpg
Kramer: vm-1010

1:10 Composite Video Distribution Amplifier
The VM1010 is a high-performance distribution amplifier for composite video. The VM 1010 can also be configured as a 1:5 distribution amplifier for s-Video (Y/C)...
Inputs    2 Composite/Component Video, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
Outputs    2x5 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    1.8Vpp
Video Bandwidth (-3dB)    235MHz
Diff. Gain    0.2%
vm-1021.jpg
Kramer: vm-1021

1:20 Composite Video Distribution Amplifier

The VM1021 is a high-performance distribution amplifier for composite or SDI video signals. The VM 1021 provides controls to compensate for signal losses inherent...

Input    1 Composite Video Or A Single Component, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
Outputs    20 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.1%
Diff. Phase    0.07deg
vm-1055.jpg
Kramer: vm-1055

1:5 RGBHV Video Distribution Amplifier

The VM1055 is a high-performance distribution amplifier for RGBHV video signals. The VM 1055 provides correct buffering and isolation and distributes the signal...

Inputs    1x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors, (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
Outputs    5x5 component/RGBHV/composite video, 1Vpp/75Ω on BNC connectors (2 of them can be either video or SYNC 1Vpp/75Ω or TTL level/510O)
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    300MHz
Diff. Gain    0.1%
vm-10hd.jpg
Kramer: vm-10hd

1:10 HD-SDI Video Distribution Amplifier
The VM10HD is a high-performance distribution amplifier for HD-SDI signals. The VM 10HD takes one input, provides reclocking and equalization and distributes the...
Input    1 SMPTE-259M, 292M, 344M serial video, 75Ω on a BNC connector
Outputs    11 equalized and reclocked SMPTE-259M, 292M, 344M outputs, 75Ω on BNC connectors
Max. Output level    800mVpp/75Ω
Maximum Data Rate    1.485Gbps
Coupling    AC
vm-10hdxl.jpg
Kramer: vm-10hdxl

1:10 3G HD-SDI Distribution Amplifier

The VM10HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 10HDxl takes one input, provides reclocking and equalization and...

Inputs    1 SMPTE-259M/292M/424M serial video, 75Ω on a BNC connector
Outputs    10 equalized and reclocked SMPTE-259M/292M/424M outputs, 75Ω on BNC connectors;1 looped GENLOCK 75Ω/Hi-Z on a BNC connector
Max. Output level    800mVpp/75Ω
Maximum Data Rate    Up to 2.97Gbps
Coupling    AC
vm-10xl.jpg
Kramer: vm-10xl

1:10 Composite Video & Stereo Audio Distribution Amplifier

The VM10xl is a state of the art, broadcast quality 1:10 distribution amplifier for composite or SDI video signals with unbalanced stereo or balanced mono audio. The VM...

Inputs    1 Composite Video, Looping, 1Vpp/75Ω with Termination Switch on BNC Connectors. 2 Balanced Stereo/Mono Audio, Looping, 1Vpp/50kΩ on RCA Connectors
Outputs    10 Composite Video, 1Vpp/75Ω on BNC Connectors. 10 Balanced Stereo/Mono Audio, 1Vpp/50Ω on RCA Connectors
Max. Output Level    Video: 1.6Vpp; Audio: 26.5Vpp
Bandwidth (-3dB)    Video 360MHz; Audio 100kHz
Diff. Gain    0.07%
vm-1110xl.jpg
Kramer: vm-1110xl

1:10 Balanced Mono Audio Distribution Amplifier

The VM1110xl is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1110xl can also be configured as a 1: 5...

Inputs    2 balanced stereo audio 4dBu/50kΩ on XLR (F) connectors
Outputs    10 balanced stereo audio 4dBu/50Ω on XLR (M) connectors
Max. Output Level    23.8Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    89.3dB
vm-1120.jpg
Kramer: vm-1120

1:10 Balanced Stereo Audio Distribution Amplifier

The VM1120 is a high-performance distribution amplifier for balanced mono audio signals on XLR connectors. The VM 1120 can also be configured as a 1:20...

Inputs    2 balanced stereo or 4 balanced mono audio 4dBu/50kΩ on XLR (F) connectors
Outputs    10 balanced stereo or 20 balanced mono audio 4dBu/50Ω on XLR (M) connectors
Max. Output Level    23.8Vpp
Bandwidth (-3dB)    >100kHz
S/N Ratio    89.3dB
vm-114h.jpg
Kramer: vm-114h

2x1:4 HDMI TP Switcher & DA

The VM−114H is a switcher/distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable input signals and distributes...

vm-114h2c.jpg
Kramer: vm-114h2c

2x1:4 HDMI/TP Transmitter

The VM−114H2C is a high−performance switcher and distribution amplifier for HDMI and DGKat™ twisted pair signals. It reclocks and equalizes one of two selectable...

vm-114h4c.jpg
Kramer: vm-114h4c

2x1:4 HDMI Switcher, Twisted Pair Distribution Amplifier & Transmitter

The VM-114H4C is a high-performance switcher and distribution amplifier for HDMI and twisted pair signals. The VM 114H4C reclocks and equalizes one of two...

Inputs    1 HDMI connector; 1 twisted pair on an RJ-45 connector
Outputs    4 twisted pairs on RJ-45 connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
Controls    Input select button, EDID select button, panel lock button
vm-12hdcp.jpg
Kramer: vm-12hdcp

1:12 HDCP Compliant DVI Distribution Amplifier

The VM12HDCP is an HDCP-compliant distribution amplifier for DVI-D signals with resolution up to 1080p or UXGA. The VM 12HDCP reclocks and equalizes the signal...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
Outputs    12 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
Bandwidth    1.65Gbps
Controls    SELECT and READ buttons for selecting and storing EDID information
Power Source    100-240V AC, 50/60Hz, 11VA
vm-1610.jpg
Kramer: vm-1610

1:10 Balanced Stereo Audio Distribution Amplifier

The VM1610 is a high-performance distribution amplifier for balanced stereo signals. The VM 1610 can also be configured as two 1:5 balanced stereo audio...

Inputs    2 balanced stereo audio 4dBu, 50kΩ on detachable terminal blocks
Outputs    10 (or 2x5) balanced stereo audio 4dBu, 50Ω on detachable terminal blocks
Audio Bandwidth (-3dB)    >100kHz
Max. Audio Output    18Vpp
Gain Range    0.5dB to 9.5dB (4 trimmers, 2 for each input channel)
vm-16h.jpg
Kramer: vm-16h

1:16 HDMI Distribution Amplifier

The VM16H is a distribution amplifier for HDMI signals. The VM 16H reclocks and equalizes the signal and distributes it to 16 identical outputs.

Input    HDMI Connector
Output    8/16 HDMI connectors
Bandwidth    Supports up to 2.25Gbps per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3a and HDCP
Controls    SELECT and READ buttons for selecting and storing EDID information
vm-1h4c.jpg
Kramer: vm-1h4c

1:4 HDMI TP Trans & DA

The VM−1H4C is a high−quality twisted pair distribution amplifier for HDMI signals. The unit receives serial commands and IR signals transparently via the RS−232...

vm-20arii.jpg
Kramer: vm-20arii

1:20 Composite Video & Stereo Audio Distribution Amplifier

The VM20ARII is a multi-format, high-performance distribution amplifier that can also be configured for composite video and unbalanced stereo audio signals. The...

Inputs    4 Video, Looping, 1Vpp/75Ω on BNC Connectors with Termination Switches; 4 Unbalanced Stereo
Outputs    Video: 20 (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5) 1Vpp/75Ω on BNC Connectors; Audio: 20 (1:20, 2x1:10, 4x1:5, 1:10, 2x1:5) Stereo or Balanced Mono, 4dBu/50Ω, 27Vpp Max. on RCA Connectors
Video Bandwidth(-3dB)    430MHz
Audio Bandwidth(-3dB)    110kHz
Diff. Gain    0.06%
vm-216h.jpg
Kramer: vm-216h

2x1:16 HDMI Distribution Amplifier

The VM216H is a distribution amplifier for HDMI signals. The VM 216H reclocks and equalizes one of 2 selectable input signals and distributes it to 8 or 16...

Inputs    2 on HDMI connectors
Outputs    16 on HDMI connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
Controls    EDID, IN 1, IN 2, IR remote controller and LOCK buttons
vm-22h.jpg
Kramer: vm-22h

2x1:2 HDMI Distribution Amplifier

The VM22H is a distribution amplifier for HDMI signals. The VM 22H reclocks and equalizes one of two selectable input signals and distributes it to two identical...

Inputs    2 HDMI connectors
Outputs    2 HDMI connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
Controls    EDID SETUP button, input select button, IR
vm-22hd.jpg
Kramer: vm-22hd

Dual-Mode 1:2 HD-SDI Distribution Amplifier

The VM22HD is a high-performance distribution amplifier for HD-SDI and dual link HD-SDI signals. The VM 22HD can be configured as two 1:2 distribution amplifier,...

Inputs    2 SMPTE-259M, 344M, 292M, 372M serial video, 75Ω on a BNC connector
Ouptuts    4 equalized and reclocked SMPTE-259M, 344M, 292M, 372M outputs, 75Ω on BNC connectors
Max. Output Level    800mVpp/75Ω
Max. Baud Rate    1.485Gbps
Power Source    12VDC, 250mA
vm-24h.jpg
Kramer: vm-24h

2x1:4 HDMI Distribution Amplifier

The VM24H is a distribution amplifier for HDMI signals. The VM 24H reclocks and equalizes one of 2 selectable input signals and distributes it to 4 identical...

Inputs    2 HDMI connectors
Outputs    4 HDMI connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
controls    EDID SELECT, EDID READ, IN 1, IN 2 buttons, RS-232, IR
vm-24hc.jpg
Kramer: vm-24hc

2x1:4 HDMI Switcher & DA

The VM−24HC is a high−performance switcher and distribution amplifier for HDMI signals. The unit accepts one of two HDMI inputs and distributes the selected signal to...

vm-24hdcp.jpg
Kramer: vm-24hdcp

2:4 DVI Distribution Amplifier

The VM24HDCP is a high-performance distribution amplifier for DVI signals. The VM 24HDCP reclocks and equalizes one of two input signals and distributes it to...

Inputs    2 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
Outputs    4 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Controls    EDID SELECT, EDID READ, IN 1, IN 2 buttons, RS-232, IR
Indicator LEDs    Output status LEDs
vm-25.jpg
Kramer: vm-25

1:25 Composite Video Distribution Amplifier

The VM25 is a high-performance distribution amplifier for composite video signals. The VM 25 takes one input, provides correct buffering and isolation, and...

Input    1 Composite Video, Looping on an RCA Connector
Outputs    25 Composite Video on RCA Connectors, 1 Loop on an RCA Connector
Max. Output Level    1.7Vpp
Bandwidth (-3dB)    430MHz
Diff. Gain    0.08%
vm-28h.jpg
Kramer: vm-28h

2x1:8 HDMI Distribution Amplifier

The VM−28H is a distribution amplifier for HDMI signals. It reclocks and equalizes one of 2 selectable input signals and distributes it to 8 identical

Inputs    2 on HDMI connectors
Outputs    8 on HDMI connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI and HDCP
Controls    EDID, IN 1, IN 2, IR remote controller and LOCK buttons
vm-2c.jpg
Kramer: vm-2c

1:2 Component Video Distribution Amplifier

The VM-2C is a high-performance distribution amplifier for component Video (RGB/YUV) signals. The VM-2C takes one input, provides correct buffering and isolation...

Input    1 component video (Y, PB/CB, PR/CR, or Y, U, V) on RCA connectors, 1Vpp/75Ω
Outputs    2 component video (Y, PB/CB, PR/CR, or Y, U, V) on RCA connectors, 1Vpp/75Ω
Max. Output level    2.4Vpp
Bandwidth (-3dB)    510MHz
Diff. Gain    0.03%
vm-2dp.jpg
Kramer: vm-2dp

1:2 DisplayPort Distribution Amplifier

The VM-2DP is a high-quality distribution amplifier for DisplayPort signals. The VM-2DP distributes one input signal to two identical outputs.

Input    1 DisplayPort connector
Outputs    2 DisplayPort connectors
Bandwidth    Supports up to 2.7Gbps bandwidth per lane, 10.8Gps total for all four lanes
Compliance with HDMI Standard    Supports DisplayPort 1.1a and HDCP 1.3
Controls    Output and EDID select buttons
vm-2hd.jpg
Kramer: vm-2hd

1:2 HD-SDI Video Distribution Amplifier

The VM-2HD is a high-performance distribution amplifier for HD-SDI signals. The VM-2HD takes one input, provides reclocking and equalization and distributes the...

Input    1 SMPTE-259M/292M/344M SDI, 75Ω on a BNC connector
Outputs    2 equalized and reclocked SMPTE-259M/292M/344M outputs 75Ω on BNC connectors
Maximum Data Rate    1.485Gbps
Max. Output Level    800mVpp/75Ω
Coupling    AC
vm-2hdcpxl.jpg
Kramer: vm-2hdcpxl

1:2 DVI Distribution Amplifier

The VM-2HDCPxl is an HDCP compliant distribution amplifier for DVI-D signals with resolutions up to and including WUXGA and 1080p. The VM-2HDCPxl reclocks and...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
Outputs    2 DVI, 1.2Vpp on DVI Molex 24-pin female connectors; DDC signal 5Vpp (TTL)
Compliance with Standards    Supports DVI 1.1 and HDCP
Max. Resolution    Up to WUXGA (1920x1200), 1080p
Bandwidth    2.25Gbps
vm-2hdxl.jpg
Kramer: vm-2hdxl

1:2 3G HD-SDI Distribution Amplifier

The VM-2HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM-2HDxl takes one input, provides reclocking and equalization and...

Input    1 SMPTE-259M/292M/344M/424M serial video, 75Ω on a BNC connector
Outputs    2 equalized and reclocked SMPTE-259M/292M/344M/424M outputs 75Ω on BNC connectors
Maximum Data Rate    2.97Gbps
Max. Output Level    800mVpp/75Ω
Coupling    AC
vm-2hxl.jpg
Kramer: vm-2hxl

1:2 HDMI Distribution Amplifier

The VM-2Hxl is a distribution amplifier for HDMI signals. The VM 2Hxl reclocks and equalizes the signal and distributes it to two identical outputs.
...

Input    1 HDMI connector
Outputs    2 HDMI connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3 and HDCP
controls    EDID SETUP button, input select button
vm-2n.jpg
Kramer: vm-2n

1:2 Composite Video & Stereo Audio Distribution Amplifier

VM-2N: 1:2 Composite Video & Stereo Audio Distribution Amplifier The VM-2N is a high-performance distribution amplifier for composite or SDI video and unbalanced...

Input    1 Composite Video - DC Coupled, 1Vpp/75Ω on A BNC Connector; 1 Balanced Stereo/Mono Audio - 4dB/50kΩ on RCA Connectors
Output    2 Composite Video - 1Vpp/75Ω on BNC Connectors; 2 Balanced Stereo/Mono Audio - 4dB/50Ω on RCA Connectors
Max. Audio Level (-3dB)    22dB
Video Bandwidth    Exceeding 400MHz
Audio Bandwidth    >100kHz (1dB)
vm-30av.jpg
Kramer: vm-30av

1:3 Composite Video & Stereo Audio Distribution Amplifier

The VM-30AV is a compact distribution amplifier for composite video and unbalanced stereo audio signals. VM 30AV provides controls to compensate for signal losses...

Inputs    1 Video, 1 Vpp/75Ω on an RCA Connector; 1 Audio Stereo, 1Vpp/70kΩ on RCA Connectors
Outputs    3 Video, 1 Vpp/75Ω on RCA Connectors; 3 Audio Stereo, 1Vpp/150Ω on RCA Connectors
Max. Output Level    Video: 2Vpp; Audio: 5.4Vpp
Bandwidth (-3dB)    Video: 430MHz, Audio: 100kHz
Diff. Gain    0.04%
vm-30avb.jpg
Kramer: vm-30avb

1:3 Composite Video & Stereo Audio Distribution Amplifier

The VM-30AVB is a compact distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 30AVB provides controls to compensate for...

Inputs    1 Video, 1 Vpp/75Ω on A BNC Connector; 1 Audio Stereo, 1Vpp/70kΩ on RCA Connectors
Outputs    3 Video, 1 Vpp/75Ω on BNC Connectors; 3 Audio Stereo, 1Vpp/150Ω on RCA Connectors
Max. Output Level    Video: 2Vpp; Audio: 5.4Vpp
Bandwidth (-3dB)    Video: 430MHz, Audio: 100kHz
Diff. Gain    0.04%
vm-3an.jpg
Kramer: vm-3an

1:3 Balanced Stereo Audio Distribution Amplifier

The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The VM-3AN takes one stereo input and distributes the signal to three...

Input    1 balanced audio stereo on 5-pin terminal block
Outputs    3 balanced audio stereo on 5-pin terminal blocks
Max. Output Level    Audio: 18.5Vpp
Bandwidth (-3dB)    >100 kHz
S/N Ratio    90dB @1kHz
vm-3sn.jpg
Kramer: vm-3sn

1:3 S-Video Distribution Amplifier

The VM-3SN is a high-performance distribution amplifier for s-Video (Y/C) signals. The VM 3SN takes one s-Video input and distributes the signal to three...

Input    1 composite video on a BNC connector
Outputs    3 composite video on BNC connectors
Max. Output Level    1.8Vpp
Bandwidth (-3dB)    135MHz
DIFF Gain    0.12%
vm-3vn.jpg
Kramer: vm-3vn

1:3 Composite Video Distribution Amplifier

The VM-3VN is a distribution amplifier for composite video signals. The VM-3VN takes one input, provides correct buffering and isolation and distributes the...

Input    1 Composite Video on A BNC Connector
Outputs    3 Composite Video on BNC Connectors
Max. Output Level    1.8Vpp
Bandwidth (-3dB)    430MHz
Diff Gain    0.12%
vm-400hdcp.jpg
Kramer: vm-400hdcp

1:4 DVI DA - HDCP Compliant

The VM−400HDCP is a distribution amplifier for DVI signals. It reclocks and equalizes the signal and distributes it to four identical

vm-4dp.jpg
Kramer: vm-4dp

1:4 DisplayPort Distribution Amplifier

The Kramer VM-4DP is a high−quality distribution amplifier for DisplayPort signals.

The VM4 DPunit distributes one input signal to four...

Input    1 DisplayPort connector.
Outputs    4 DisplayPort connectors.
Bandwidth    Supports up to 2.7Gbps bandwidth per lane, 10.8Gps total for all four lanes.
Compliance With Hdmi Standard    Supports DisplayPort 1.1a and HDCP 1.3.
Controls    EDID Select and Read buttons.
vm-4hc.jpg
Kramer: vm-4hc

Desktop 1:4 HDMI Distribution Amplifier

The Kramer VM-4HC is a distribution amplifier for HDMI signals.The VM 4HC reclocks and equalizes the signal and distributes it to four identical outputs.
...

INPUT    1 HDMI connector.
OUTPUTS    4 HDMI connectors.
BANDWIDTH    Supports up to 2.25Gbps bandwidth per graphic channel.
COMPLIANCE WITH HDMI STANDARD    HDMI and HDCP.
CONTROLS    SELECT and READ buttons for selecting and storing EDID information.
vm-4hdcpxl.jpg
Kramer: vm-4hdcpxl

1:4 DVI Distribution Amplifier

The VM-4HDCPxl is a high-performance distribution amplifier for DVI signals. The VM 4HDCPxl reclocks and equalizes one input signal and distributes it to four...

Input    1 DVI, 1.2Vpp on a DVI Molex 24-pin (F) connector; DDC signal 5Vpp (TTL)
Outputs    4 DVI, 1.2Vpp on DVI Molex 24-pin (F) connectors; DDC signal 5Vpp (TTL)
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Controls    EDID Select, EDID Read
Indicator LEDs    OUTPUT STATUS LEDs
vm-4hdxl.jpg
Kramer: vm-4hdxl

1:4 3G HD-SDI Video Distribution Amplifier

The VM-4HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The VM 4HDxl takes one input, provides reclocking and equalization and...

Input    1 SMPTE-259M/292M/344M/424M serial video 75Ω on a BNC connector
Outputs    4 equalized and reclocked SMPTE-259M/292M/344M/424M outputs 75Ω on BNC
Maximum Data Rate    2.97Gbps
Max. Output Level    800mVpp/75Ω
Coupling    AC
vm-4hxl.jpg
Kramer: vm-4hxl

1:4 HDMI Distribution Amplifier

The VM−4Hxl is a distribution amplifier for HDMI signals with resolutions up to and including WUXGA and 1080p. The unit reclocks and equalizes the signal and distributes it...

Input    1 HDMI connector
Outputs    4 HDMI connectors
Bandwidth    Supports up to 2.25Gbps bandwidth per graphic channel
Max. Resolution    Up to WUXGA (1920x1200), 1080p
Compliance with HDMI Standard    Supports HDMI 1.3 and HDCP
vm-50an.jpg
Kramer: vm-50an

1:5 Balanced & Unbalanced Stereo Audio Distribution Amplifier

The VM-50AN is a high-performance distribution amplifier for balanced and unbalanced stereo audio signals. The VM 50AN takes one balanced or unbalanced stereo...

Inputs    1 balanced stereo audio, 4dBu/50kΩ on a detachable terminal block connector; 1 unbalanced stereo audio, 1Vpp/50kΩ on a 3.5mm mini jack. Balanced/Unbalanced input selection
Output    5 balanced stereo audio, 4dBu/50Ω on detachable terminal block connectors; 5 unbalanced stereo audio, 1Vpp/470Ω on 3.5mm mini jacks
Max. Output Level    >24dBm
Bandwidth (-3dB)    40kHz; fully loaded
S/N Ratio    84dB, unweighted
vm-50ca.jpg
Kramer: vm-50ca

1:5 Component Video, S/PDIF & Stereo Audio Distribution Amplifier

The VM-50CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. The VM 50CA takes one input of...

Inputs    1 component video (Y, Pb/Cb, Pr/Cr); 1Vpp/0.7Vpp, 75Ω on 3 RCA connectors; 1 digital audio (S/PDIF) 75Ω on an RCA connector; 1 unbalanced stereo audio 50kΩ, 4dBu on 2 RCA connectors
Outputs    5 component video (Y, Pb/Cb, Pr/Cr) 1Vpp/0.7Vpp, 75Ω on 15 RCA connectors; 5 digital audio (S/PDIF) on 5 RCA connectors; 5 unbalanced stereo audio 150O, 4dBu on 10 RCA connectors
Max. Output Level    Video 2.3Vpp; Audio 1.8Vpp (S/PDIF); 22dBu (analog)
Bandwidth (-3dB)    Video 400MHz, Fully Loaded; Audio 350MHz (S/PDIF); 40kHz (analog)
Diff. Gain    0.08%
vm-50hn.jpg
Kramer: vm-50hn

1:5 Stereo Headphone Distribution Amplifier

The VM-50HN is a high-performance distribution amplifier for headphone signals. The VM 50HN takes one stereo headphone input and distributes the signal to five...

Input    1 unbalanced stereo audio, 1Vpp/50kΩ on a 6.5mm phone jack
Outputs    5 unbalanced stereo audio, 500mW/8Ω on 6.5mm phone jacks
Audio Bandwidth (-3dB)    25kHz
Control    5 stereo output level controls (front), 1 mono switch (rear)
Gain Range    -60dB to 10dB
vm-50v.jpg
Kramer: vm-50v

1:5 Composite Video Distribution Amplifier

The VM-50V is a high-performance distribution amplifier for composite or SDI signals. The VM 50V takes one input, provides correct buffering and isolation, and...

Input    1 Video, Looping, 1Vpp/75Ω on BNC Connectors With A Termination Switch
Outputs    5 Video, 1Vpp/75Ω on BNC Connectors
Max. Video Output    2Vpp
Video Bandwidth (-3dB)    480MHz
Diff. Gain    0.05%
vm-51.jpg
Kramer: vm-51

1:5 Composite Video Distribution Amplifier

The VM-51 is a high-performance distribution amplifier for composite or SDI video signals. The VM 51 takes one input, provides correct buffering and isolation and...

Input    1 Video, 1Vpp/75Ω on A BNC Connector
Outputs    5 Video, 1Vpp/75Ω on BNC Connectors
Max. Output Level    2.3Vpp/75Ω
Bandwidth (-3dB)    420MHz
Diff. Gain    0.05%
vm-5arii.jpg
Kramer: vm-5arii

1:5 Composite Video & Stereo Audio Distribution Amplifier

The VM-5ARII is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 5ARII provides controls to...

Inputs    1 Video, Composite or Single Component, Looping, 1Vpp/75Ω on BNC Connectors with Termination Switch; 1 Unbalanced Stereo Audio Looping, 4dB/50kΩ on RCA Connectors
Outputs    5 Video, Composite or Single Component, 1Vpp/75Ω on BNC Connectors; 5 Unbalanced Stereo Audio, 4dB/150Ω, 27Vpp Max. on RCA Connectors
Max. Output Level    Video 2.2Vpp; Audio 27Vpp
Video Bandwidth(-3dB)    360MHz
Audio Bandwidth(-3dB)    60kHz
vm-5hdxln.jpg
Kramer: vm-5hdxln

1:5 3G HD-SDI DA

The VM−5HDxln is a high−performance distribution amplifier for 3G HD−SDI signals. The unit takes one input, provides reclocking and equalization, and distributes...

vm-5s.jpg
Kramer: vm-5s

1:5 Composite Video & Stereo Audio Distribution Amplifier

The VM-5S is a high-performance distribution amplifier for composite or SDI video and unbalanced stereo audio signals. The VM 5S takes one input, provides correct...

Input    1 Video AC/DC Coupled (Internal Jumper), Looping 1Vpp/75Ω on BNC Connectors with Rear Termination Switch; 1 Balanced Stereo/Mono Audio, Up to 21v/50kΩ on RCA Connectors
Outputs    5 Video, 1Vpp/75Ω on BNC Connectors; 5 Balanced Stereo/Mono Audio, Up to 21v/220Ω on RCA Connectors
Max. Video Output    1.7Vpp
Video Bandwidth (-3dB)    340MHz
Audio Bandwidth(-3dB)    20kHz
vm-73.jpg
Kramer: vm-73

1:3 Multi-Format Video, HDMI & Computer Graphics Video Distribution Amplifier

The VM-73 is a 5-input multi-format distribution amplifier for composite, s-Video (Y/C), component (YUV), computer graphics video and HDMI signals. The VM 73 is...

Inputs    1 Composite on A BNC Connector, 1 S-Video on A 4-Pin Connector, 1 Component (Y, Pb/Cb, Pr/Cr) on 3 RCA Connectors, 1 XGA on A 15-Pin Hd Connector, 1 Hdmi on an Hdmi Connector
Outputs    3 Composite on BNC Connectors, 3 S-Video on 4-Pin Connectors, 3 Component (Y, Pb/Cb, Pr/Cr) on 3 RCA Connectors Each, 3 XGA on 15-Pin Hd Connectors, 3 Hdmi on Hdmi Connectors
Output Level    1.8Vpp (Composite), 1.9Vpp (Y/C), 2.0Vpp (Component), 2.0Vpp (XGA)
Bandwidth (-3dB)    430MHz (Composite), 440MHz (Y/C), 430MHz (Component), 405MHz (XGA), 2.25gbps (Hdmi)
Diff. Gain    0.05% (Composite), 0.06% (Y/C),0.05% (Component), 0.05% (XGA)
vm-80a.jpg
Kramer: vm-80a

1:8 Balanced Stereo Audio Distribution Amplifier

The VM-80A is a high-performance distribution amplifier for balanced stereo audio signals. The VM 80A can also be configured as two 1: 4 DAs.

Inputs    2 balanced stereo audio 4dBu, 100kΩ on terminal block connectors
Outputs    8 (or 2 x 4) balanced stereo audio, 4dBu, 50Ω on terminal block connectors
Max. Audio output    20Vpp
Audio Bandwidth (-3dB)    20kHz
Gain Range    0.2 to 5.8dB (4 trimmers, 2 for each input channel)
vm-80v.jpg
Kramer: vm-80v

1:8 Composite Video Distribution Amplifier

The VM-80V is a high-performance distribution amplifier for composite or SDI signals. The VM 80V can also be configured as a 1:4 DA for s-Video (Y/C) signals and...

Inputs    2 Video: 1Vpp/75Ω on BNC Connectors With Termination Switches
Outputs    2x4 Video, 1Vpp/75Ω on BNC Connectors
Max. Output    2Vpp
Video Bandwidth (-3dB)    330MHz
Diff. Gain    0.12%
vm-8h.jpg
Kramer: vm-8h

1:8 HDMI Distribution Amplifier

The VM8H is a distribution amplifier for HDMI signals. The VM 8H reclocks and equalizes the signal and distributes it to 8 identical outputs.

Input    HDMI connector
Outputs    8 HDMI connectors
Bandwidth    Supports up to 2.25Gbps per graphic channel
Compliance with HDMI Standard    Supports HDMI 1.3a and HDCP
Controls    SELECT and READ buttons for selecting and storing EDID information
vm-92.jpg
Kramer: vm-92

9 Channel Multi-Mode Video Distribution Amplifier

The VM-92 is a high-performance multimode distribution amplifier for composite, s- Video (Y/C), component (YUV), and RGBS video signals. The VM-92 can also be...

Inputs    9 Independent Channels 1vpp/75Ω on Bnc Connectors
Outputs    9x2 Independent Channels 1vpp/75Ω on Bnc Connectors; 9 Loops (1 Per Channel) 1vpp/75Ω on Bnc Connectors
Max. Output Level    3.3vpp
Bandwidth (-3db)    500mhz
Diff. Gain    0.03%
vp-10.jpg
Kramer: vp-10

1:10 RGBHV Video Distribution Amplifier

The VP10 is a high-performance distribution amplifier for RGBHV video signals. The VP10 provides correct buffering and isolation and distributes the signal to all...

Input    Analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input coupling selection switches
Output    10 sets of analog red, green, blue signals, 0.7Vpp/75Ω, H & V syncs, TTL or analog level on BNC connectors with termination switches and AC/DC input Coupling: Video AC/DC Coupling Selection
Video Bandwidth(-3dB)    350MHz
Diff. Gain    0.12%
Diff. Phase    0.15Deg
vp-108.jpg
Kramer: vp-108

1:8 Computer Graphics Video & Balanced Stereo Audio Distribution Amplifier

The VP-108 is a high-performance computer graphics video amplifier for computer graphics signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. The...

Inputs    1 XGA input, looping, on 15-pin HD (F) connectors; 1 balanced audio 4dBu 100kΩ on detachable terminal block connectors
Outputs    8 XGA on 15-pin HD (F) connectors; 8 balanced audio 4dBu/50O on detachable terminal block connectors
Max. Output Level    Video 1.5Vpp, Audio 25Vpp
Bandwidth (-3dB)    Video 400MHz, Audio 100kHz
Diff. Gain    0.03%
vp-111k.jpg
Kramer: vp-111k

1:1 Computer Graphics Video Line Amplifier

The VP-111K is a high-performance line driver for signals exceeding UXGA. The VP 111K provides controls to compensate for signal losses inherent in long cable...

Input    1 XGA, looping on a 15-pin HD connector
Outputs    1 XGA on a 15-pin HD connector
Max Output Level    2.2Vpp
Bandwidth (-3dB)    500MHz
Diff. Gain    0.05%
vp-123.jpg
Kramer: vp-123

1:3 RGBHV Computer Graphics Video Distribution Amplifier

The VP-123 is a high-performance amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP 123 takes one...

Input    1x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors; H Sync and V Sync, TTLlevel
Output    3x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors 3 x H Sync, V Sync TTL level on BNC connectors
Bandwidth (-3dB)    450MHz
Max. Output Level    2.1Vpp/75Ω (R, G, B)
Diff. Gain    0.13%
vp-123v.jpg
Kramer: vp-123v

1:3 RGBHV Computer Graphics Video Distribution Amplifier

The VP-123V is a high-performance amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP 123V takes one...

Input    1x3 component/RGB/composite video, 1Vpp/75Ω on a 15-pin HD (F) connector; H Sync and V Sync, TTL level
Output    3x3 component/RGB/composite video, 1Vpp/75Ω on BNC connectors 3 x H Sync, V Sync TTL level on BNC connectors
Bandwidth (-3dB)    450MHz
Max. Output Level    2.1Vpp/75Ω (R, G, B)
Diff. Gain    0.13%
vp-200ak.jpg
Kramer: vp-200ak

1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier

The VP-200AK is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and stereo audio signals. The VP...

Inputs    1 XGA on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini jack
Outputs    2 UXGA on 15-pin HD (F) connectors; 2 unbalanced stereo audio on 3.5mm mini jacks; 2 balanced stereo audio on detachable 5-pin terminal blocks
Max. Output Level    Video 2.0Vpp; Audio 7.2Vpp
Bandwidth (-3dB)    Video 510MHz; Audio >100kHz
Diff. Gain    0.55%
vp-200dxl.jpg
Kramer: vp-200dxl

1:2 Computer Graphics Video Differential Line Amplifier

The VP-200Dxl is a high-performance differential line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP...

Input    Analog red, green, blue signals - 0.7Vpp/75Ω, H & V sync, TTL level, on a 15-pin HD (F) connector
Outputs    2 analog red, green, blue signals - 0.7Vpp/75Ω, H & V syncs, TTL level, on 15-pin HD (F) connectors
Bandwidth (-3dB)    400MHz
Diff. Gain    0.17%
Diff. Phase    0.1Deg
vp-200k.jpg
Kramer: vp-200k

1:2 High Resolution UXGA Distribution Amplifier

The VP200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The VP 200K takes one input, provides correct buffering and...

Input    1 UXGA on an 15-pin HD connector
Outputs    2 UXGA on 15-pin HD connectors
Max. Output level    2.2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.03%
vp-200n5.jpg
Kramer: vp-200n5

1:2 Computer Graphics Video Distribution Amplifier

The VP200N5 is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The VP200N5 takes one input, provides correct buffering and...

Input    1 UXGA on an 15-pin HD connector
Outputs    2 UXGA on 15-pin HD connectors
Max. Output Level    1.8Vpp
Bandwidth (-3dB)    370MHz
Diff. Gain    0.03%
vp-200xln.jpg
Kramer: vp-200xln

1:2 Computer Graphics Video Line & Distribution Amplifier

The VP200xln is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP200xln...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    2 XGA on 15-pin HD (F) connectors
Max. Output level    2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.05%
vp-210k.jpg
Kramer: vp-210k

1:1 Computer Graphics Video Line Amplifier (350MHz)

The VP-210K is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP-210K provides controls to...

Input    1 UXGA on a 15-pin HD (F) connector;1 LOOP UXGA on an 15-pin HD (F) connector
Output    1 UXGA on a 15-pin HD (F) connector
Video Bandwidth (-3dB)    350MHz
Diff. Gain    0.41%
Diff. Phase    0.53Deg
vp-2k.jpg
Kramer: vp-2k

1:2 Computer Graphics Video & Stereo Audio Distribution Amplifier

The VP2K is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The...

Inputs    Video 1 UXGA on a 15-pin HD (F) connector; Audio 1 audio stereo on RCA connectors
Outputs    Video 2 UXGA on 15-pin HD (F) connectors; Audio 2 audio stereo on RCA connectors
Max. Output Level    Video 2.2Vpp; Audio 6.8Vpp
Bandwidth (–3dB)    Video 380MHz; Audio >100kHz
Diff. Gain    0.03%
vp-2l.jpg
Kramer: vp-2l

1:1 Computer Graphics Video Line Amplifier

The VP2L is a high-performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP2L provides controls to...

Input    1 UXGA on a 15-pin HD (F) connector
Output    1 UXGA on a 15-pin HD (F) connector
Max. Output level    1.5Vpp
Resolution    Up to UXGA
Diff. Gain    2.7%
vp-300k.jpg
Kramer: vp-300k

1:3 Computer Graphics Video Distribution Amplifier

The VP-300K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The VP-300K takes one input, provides correct...

Input    1 UXGA on an 15-pin HD connector
Outputs    3 UXGA on 15-pin HD connectors
max. output level    2.2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.03%
vp-3xl.jpg
Kramer: vp-3xl

1:3 Computer Graphics Video Distribution Amplifier

The VP3xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP3xl...

Input    1 VGA/UXGA input on a 15-pin HD (F) connector
Output    3 VGA/UXGA on 15-pin HD (F) connectors
Bandwidth (-3dB)    375MHz
Max. Output Level    1.9Vpp
Diff. Gain    0.12%
vp-400k.jpg
Kramer: vp-400k

1:4 Computer Graphics Video Distribution Amplifier

The VP-400K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The VP 400K takes one input, provides correct...

Input    1 UXGA on an 15-pin HD connector
Outputs    4 UXGA on 15-pin HD connectors
Max. Output Level    2.2Vpp
Bandwidth (-3dB)    400MHz
Diff. Gain    0.03%
vp-4xl.jpg
Kramer: vp-4xl

1:4 Computer Graphics Video Distribution Amplifier

The VP4xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP4xl...

Input    1 VGA/UXGA input on a 15-pin HD (F) connector
Output    4 VGA/UXGA on 15-pin HD (F) connectors
Bandwidth (-3dB)    375MHz
Max. Output level    1.9Vpp
Diff. Gain    0.12%
vp-597.jpg
Datavideo: vp-597

2x6 3G HD/SD-SDI Distribution Amplifier

Datavideo VP-597 is a six output SDI distribution amplifier with A/B inputs switching control (non-locked). It supports 3G/HD/SD SDI video with embedded Audio and re-clock design...

vp-5xl.jpg
Kramer: vp-5xl

1:5 Computer Graphics Video Distribution Amplifier

The VP5xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The VP5xl...

Input    1 VGA/UXGA input on a 15-pin HD (F) connector
Output    5 VGA/UXGA on 15-pin HD (F) connectors
Bandwidth (-3dB)    375MHz
Max. Output Level    1.9Vpp
Diff. Gain    0.12%
vp-6a.jpg
Kramer: vp-6a

1:6 Computer Graphics Video & Audio Distribution Amplifier With Twisted Pair Transmitter

The VP6A is a high-performance computer graphics video distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA with balanced or...

Inputs    Video 1 XGA on a 15-pin HD (F) connector; Audio 1 unbalanced stereo audio on a 3.5mm mini jack; 1 balanced stereo audio on a 5-pin terminal block connector
Outputs    Video 6 XGA on 15-pin HD (F) connectors; 1 RJ-45 connector; Audio 6 unbalanced stereo audio on 3.5mm mini jacks; 6 balanced stereo audio on 5-pin terminal block connectors
Max. Output Level    Video 1.7Vpp; Audio 26Vpp
Bandwidth (-3dB)    Video 500MHz (15-pin HD); Audio >100kHz
Diff. Gain    0.09%
vp-6xln.jpg
Kramer: vp-6xln

1:6 Computer Graphics Video Distribution Amplifier

The VP6xlN is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP6xlN takes one input,...

Input    1 XGA on a 15-pin HD (F) connector
Outputs    6 XGA on 15-pin HD (F) connectors
Max. Output level    1.7Vpp
Bandwidth    500MHz
Diff. Gain    0.09%
vp-8k.jpg
Kramer: vp-8k

1:8 Computer Graphincs Video Distribution Amplifier

The VP8K is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The VP8K takes one input,...

Input    1 VGA/UXGA on a 15-pin HD (F) connector
Outputs    8 VGA/UXGA on 15-pin HD (F) connectors
Max. Output level    2.2Vpp
Bandwidth (–3dB)    370MHz
Diff. Gain    0.05%


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.