The Imaging Source DFG/USB2-PRO is a 2 input Video-to-USB converter. This DFG/USB2 PRO converter comes with up to 768x576 pixels and up to 30 images/second.
...

Video formats	PAL/NTSC, RS-170/CCIR
Max resolution	PAL= 768x76 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs	1xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface	USB 2.0, Typ B
Color formats	UYVY, Y800

The Imaging Source DFG/USB2-PROPCB is a 2 input Video-to-USB converter. This DFG/USB2 PROPCB converter comes with up to 768x576 pixels and up to 30 images/second.<...

Video formats	PAL/NTSC, RS-170/CCIR
Max resolution	PAL= 768x576 at 25 fps; NTSC= 640x480 at 30 fps
Analog inputs	1xRCA (cinch); 1xY/C (S-Video); Multiplexed
Bus interface	USB 2.0, Typ B
Color formats	UYVY, Y800

The Vicon FMC-RK Fiber-Optic Media Converters with Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and o...

The FMC Series provides a low-cost and effective solution for extending the range of your video network. The FMC-TRM-A and B Ethernet 2-port media converters are designed to transm...

The FMC Series provides a low-cost and effective solution for extending the range of your video network. The FMC-TRRM-A and B Ethernet 2-port media converters are designed to trans...

The Ganz GNFE1003MAC2-M Ethernet media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100Mbps electric...

The Ganz GNFE1005M2 is an Industrial Grade Media Converter, with 100Mbps, Multimode Fiber, Standard Size, ST Connector.

The GNFE1005M2 Ether...

The Ganz GNFE1005MAC2-M Ethernet media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100Mbps electric...

The Ganz GNFE1005SAC2-M Ethernet media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100Mbps electric...

The Bosch LTC 8782/60-02 Code Translators are accessory units that convert Biphase code to other manufacturers' control codes, or converts other manufacturers' codes to Biphase. Ma...

The Bosch LTC 8786/60 of data converters are designed to convert Bosch "Receiver/Driver and AutoDome RS-232 Control Code Protocol" into Allegiant Bi-Phase control code. These units...

The SDI to HDMI Converter converts 3G-SDI or HD-SDI to HDMI. The VAC-11SH allows an SDI signal to be converted and viewed on a consumer HDMI monitor. The embedded audio signal brou...

The most popular format in consumer monitors, HDMI, can now easily be converted to professional 3G-SDI/HD-SDI in real time. Changing HDMI to SDI is simple with the VAC-12HS. Conversion is purely di...

The ViewZ VZ-DLA converts an auto iris lens from DC drive to video drive. A built-in amplifier in the VZ-DLA increases the video signal to automatically operate th...

The Tv One 1T-AP-299 Dolby Digital to Analog Audio Converter is a versatile tool that provides conversion capabilities between Optical, Coaxial and L/R Analog audio signals. The

The TV One 1T-C2-150 Down Converter PLUS is based on TV One’s exclusive CORIO2™ technology and provides high quality scan conversion from Computer or HDTV signa...

Analog Input Signal Type	RGBHV, RGBS, RGsB, YPbPr
Sync	TTL Level, 10K°, Pos or Neg
Termination	Auto-terminating into 75Ω
Input Connectors	1x HD-15 Female with Loop-thru
R-G-B Level Range	0.5-2.0 Vp-p

The TV One 1T-C2-520 is a high performance converter that transforms DVI-D 720p or 1080i HD signals to HD-SDI for broadcast and professional use. An analog YPbPr or RGBHV signal ca...

DVI-D or RGBHV Input	1x via DVI-I Connector
YUV or YPbPr Input	1x via 3x BNC Connectors
SD/HD-SDI Video Output	SMPTE259M @ 270Mb/s, SMPTE292M to 1485Mb/s = 1x via BNC Connector; Video Processing = 24 bit, 4:4:4
Output Resolutions (Note 1)	525-line interlaced YUV @ 59.94Hz = 525-line SD-SDI @ 59.94Hz; 625-line interlaced YUV @ 50Hz = 625-line SD-SDI @ 50Hz
Display Control	On screen display

The TV One 1T-DVI-HDMI converts a Digital DVI signal to an HDMI compliant output allowing the viewing or switching of a DVI signal on an HDMI system.

All standard HD...

Video Input	1x DVI via DVI-I Connector
Audio Inputs	1x SPDIF Coaxial via RCA
Video Outputs	1x HDMI via HDMI Connector
HD I/O Resolutions (YPbPr)	Interlaced (50&60Hz) = 480i, 576i, 1080i; Progressive (50&60Hz) = 480p, 576p, 720p, 1080p; Special (24 to 30Hz) = 1080p@24, 1080p@25, 1080p@30
PC I/O Resolutions (RGBHV)	VGA, SVGA, XGA = 60,72,75,85 Hz; XGAi = 87 Hz; SXGA = 60,75,85 Hz; UXGA = 60 Hz; WUXGA = 60 Hz (reduced blanking); 1152x864 = 70,75,85 Hz

The 1T-FC-326 is a high quality device that allows selection of either of its two HDMI inputs for conversion to an analog YPbPr or YUV output. Very wide video bandwidth insures tha...

Video Inputs (HDMI)	2x via HDMI Connectors
Video Outputs (YPbPr or YUV)	1x via 3x RCA Connectors
Video Output Level	Y=1V p-p, Pb/Pr=0.7Vp-p
Video Bandwidth	>160MHz
Impedance	75Ω

The TV One 1T-FC-425 converts DVI to RGBHV or Component YPbPr, enabling viewing on analog displays or other devices. A DVI input can be converted to either analog RGBHV or YPbPr.

Video Inputs	1x RGB/YPbPr via HD-15
Video Outputs	1x DVI-D via DVI-I Connector
Component Signal I/O	Y Component = 1V p-p@75Ω; Pb/Pr Component = 0.7V p-p@75Ω
RGBHV Signal I/O	R-G-B = 0.7V p-p@75Ω; HV Sync = 3-5V p-p@75Ω
Frequency	Up to 165Mhz

The TV One 1T-FC-524 converts analog RGBHV or Component YPbPr inputs to DVI signals, enabling their display on DVI or HDTV monitors or other devices. An analog YPbPr input can be c...

Video Inputs	1x RGB/YPbPr via HD-15
Video Outputs	1x DVI-D via DVI-I Connector
Component Signal I/O	Y Component = 1V p-p@75Ω; Pb/Pr Component = 0.7V p-p@75Ω
RGBHV Signal I/O	R-G-B = 0.7V p-p@75Ω; HV Sync = 3-5V p-p@75Ω
Frequency	Up to 165Mhz

The TV One 1T-FC-677 3G-SDI Extender with HDMI Converter allows SD-SDI, HD-SDI and 3G-SDI signals to be displayed on either an SDI and an HDMI monitor simultaneously. The high Bitr...

The TV One 1T-FC-766 HDMI to 3G SDI Converter allows HDMI signals to be displayed on an SDI monitor. The high Bit rate processing ensures fast signal transmission without signal lo...

Video Input (HDMI)	1x via HDMI Connector
Video Outputs (3G-SDI)	2x via BNC (SD, HD & 3G SDI)
Audio Inputs (Stereo R L)	2x RCA Connectors
Video Input Signal	Automatic Detection of Type
Video Output Signal	Equalized SDI Output

The TV One 1T-PAL-NTSC-GL is an ultra compact, high performance Standard Converter that converts any of the widely used world television standards to any others. In addition, it al...

Composite Video Input	1x via BNC Connector
YC Input (S-Video)	1x via 4-PIN Mini-DIN Connector
Genlock Input	via BNC (1T-PAL-NTSC-GL Only)
Genlock Loop-thru	with 75O Termination Switch
Impedance	75Ω

The TV One 1T-V1280DVI Video Scaler is an ultra compact video to DVI-D PC/HD up-converter that features inputs for Composite Video, YC and Component 480i/576i YUV Video. The output...

The TV One 1T-VS-647 SDI to HDMI Scaler with Audio converts a variety of SDI transmission rates and video resolutions into an HDMI signal. It also provides audio flexibility by out...

The 401-C is a high-performance format converter for s-Video (Y/C) signals. The 401 C converts an s-Video input to two composite and two s-Video (Y/C) outputs simu...

→ Input	1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector
→ Outputs	2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors
→ Max. Output Level	1.4Vpp
→ Video Bandwidth (-3dB)	160MHz (Y)
→ Non-Linearity	0.05%

The 401-DN is a high-performance format converter for composite video signals. The 401 DN converts a composite video input to an s-Video (Y/C) output.

The 482-xl is a high-performance audio transcoder for balanced and unbalanced stereo audio signals. The 482 xl simultaneously converts balanced stereo signals to u...

→ Input	1 unbalanced audio stereo on a 3-pin terminal block connector; 1 balanced audio stereo on a 5-pin terminal block
→ Output	1 balanced audio stereo on a 5-pin terminal block connector; 1 unbalanced audio stereo on a 3-pin terminal block connector
→ Max. Output Level	Balanced: 21dBu; unbalanced: 21dBu @max gain
→ Bandwidth (-3dB)	>100kHz
→ Controls	-57dB to 6dB (balanced to unbalanced level); -16dB to 19dB (unbalanced to balanced level)

The 6808HDxl is a high-performance audio de-embedder for 3G HD-SDI video signals. The 6808 HDxl can de-embed two selectable AES audio streams.
 

The 6810HDxl is a high-performance audio embedder and de-embedder for 3G HD-SDI video signals. The 6810 HDxl can embed and de-embed four AES/3id audio streams.

→ Inputs	1 x SD/HD/3G HD-SDI, 1 x SD/HD/3G HD-SDI loop, 4 x AES/3id on BNC connectors
→ Outputs	1 x SD/HD/3G HD-SDI, 4 x AES/3id on BNC connectors
→ Sample Rate Conversion	48kHz
→ Power Source	5V DC, 1.04A
→ Dimensions	21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H

The Ensemble-Designs 7130 module has an HD SDI input with HD SDI, SD SDI and composite outputs, serving as both a downconverter and a distribution amplifier. If an...

The 7408 is a format converter for SDI (SMPTE 259M) signals. It converts an SDI video signal to composite video and s-Video (Y/C), or component (YUV) video.

The 7508 is a multi-format converter for composite video or s-Video (Y/C) signals. It converts either PAL, SECAM, and NTSC composite or s-Video (Y/C) signals into two SDI video (SM...

→ Input	1 composite video, 1Vpp/75Ω on a BNC connector; 1 s-Video, 1Vpp, 0.3Vpp/75Ω on a 4-pin connector
→ Output	2 SDI SMPTE-259M, ITU-R BT.601 on BNC connectors
→ Digital Resolution	10 bits
→ Bandwidth	5MHz (-0.2dB)
→ Signal to Noise Ratio	57dB

The 7900 is a flexible, configurable Up and Downconverter for use in broadcast and post. It can process SD (Standard Definition) signals into HD, downconvert HD signals into standa...

The Ensemble-Designs 7910 module accepts an SD or HD SDI input and has four HD SDI outputs. Excellent for on-air use, the 7910 is equally at home ...

The Ensemble-Designs 7920 module has an HD SDI input and four outputs that can be configured as two SDI and two composite outputs, or four SDI outputs. Whether it'...

The Ensemble-Designs 7925 module is a two-channel, dual downconverter with HD and SD outputs that can be used in the most demanding broadcast applications. With tw...

The Ensemble-Designs 7930 module provides cross conversion between HD 1.5 Gb/s formats, processing all popular variations of 1080 and 720, making it simple for every facility to in...

The TV One A2-7302 Format Converter is a high quality audio format converters designed primarily to provide maximum format flexibility for the C2-7310 HD Audio/Video Processor's au...

Interface	via HD-44 Connector
Audio Inputs	8 Channels AES3 via 8x XLR
Audio Outputs	8 Channels AES3 via 8x XLR
DARS Reference	75ΩBNC
Impedance	110Ω(Digital I/O)

The TV One A2-7312 breakout unit is a high quality audio format converters designed primarily to provide maximum format flexibility for the C2-7310 HD Audio/Video Processor's audio...

Interface	via HD-44 Connector
Audio Inputs	8 Channels AES3-id via 8 x BNC
Audio Outputs	8 Channels AES3-id via 8 x BNC
DARS Reference	75ΩBNC
Impedance	75Ω (Digital I/O)

The TV One A2-7322 format converter is a high quality audio format converters designed primarily to provide maximum format flexibility for the C2-7310 HD Audio/Video Processor's au...

Interface	via HD-44 Connector
Audio Inputs	8 Channels Stereo via Terminals
Audio Outputs	8 Channels Stereo via Terminals
DARS Reference	75ΩBNC
Impedance	600ΩBalanced (Analog I/O)

The TV One A2-7342 format converter is a high quality audio format converter designed primarily to provide maximum format flexibility for the C2-7310 HD Audio/Video Processor's aud...

Interface	via HD-44 Connector
Audio Inputs	4 Channels Stereo via 8x XLR
Audio Outputs	4 Channels Stereo via 8x XLR
DARS Reference	75ΩBNC
Voltage Level	0dbFS =6Vp-p (8.75 dBu) AES3 input maximum

The BAC-03 Converts Balanced / Unbalanced Audio. Bi-directional conversion in real-time. Ideal for connecting consumer products to professional equipment, or vice versa.

BrightEye 15 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required.

BrightEye 16 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required. It’s also a ...

BrightEye 30 is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and ...

BrightEye 46 is an electrical to optical converter and distribution amplifier that can be used with standard definition video signals, 3 Gb/s and 1.5 Gb/s high definition signals, ...

BrightEye 48 is an optical to electrical converter that can be used with standard definition video signals, 3 Gb/s and 1.5 Gb/s high definition signals, or ASI signals. The optical...

Pay a tenth of the cost for your monitors. Combine the Ensemble-Designs BrightEye 72 with any HDMI monitor for high-end display applications in broadcast and post. BrightEy...

This item is DISCONTINUED.

The Ensemble-Designs BrightEye 75 is an analog video to digital converter and audio embedder. Standard definition...

BrightEye 76 is an analog video to digital converter and audio embedder. Standard definition component or composite, or high definition analog component video is accepted on the in...

Convert HD or SD SDI video feeds to HDMI with the Ensemble-Designs BrightEye 81. Convenient for feeding a video monitor, BrightEye 81 provides a reliable way to ac...

Convert HDMI to HD or SD SDI with the Ensemble-Designs BrightEye 83. Convenient for broadcast video cameras and other sources with an HDMI output, BrightEye 83 pre...

The Ensemble-Designs BrightEye 3 is an agile Time Base Corrector and Frame Synchronizer with composite, component and Y/C inputs and SD SDI video out. Input signals are digitized t...

The Bolide BE8019 is specially designed for computer CRT monitor and LCD color monitors,multi Signal inputs: VGA, Composite Video, S-Video,support NTSC, PAL video system,output mod...

The Ensemble-Designs BrightEye 90 is a versatile up/down/cross converter or aspect ratio converter for use with analog and digital video signals. Simply set the BrightEye 9...

The Ensemble-Designs BrightEye 90-A is a versatile up/down/cross converter or aspect ratio converter for use with analog and digital video signals. Simply set the BrightEye...

BrightEye 90-F is a versatile up/down/cross converter or aspect ratio converter for use with analog and digital video signals with the addition of an optical output. Optical connec...

The Ensemble-Designs BrightEye 91 is an upconverter with analog composite and SD SDI inputs. Feed the analog composite or SD SDI output of a camera to a BrightEye 91

The Ensemble-Designs BrightEye 92-A will downconvert any type of HD signal and provides both an SD SDI output and an analog composite output that are suitable for broadcast or moni...

The BrightEye Mitto BEM-1 is a High Performance Scan Converter for PC and Mac with DVI I/O, VGA and HDMI Support with an Adapter, Memory Presets for Your Favorite Settings, and 5-Y...

The BrightEye Mitto BEM-2 is a High Performance Scan Converter for PC and Mac with DVI I/O, VGA and HDMI Support with an Adapter, Memory Presets for Your Favorite Settings, and 5-Y...

The BrightEye Mitto BEM-4 is a High Performance Scan Converter for PC and Mac with DVI I/O, VGA and HDMI Support with an Adapter, Memory Presets for Your Favorite Settings, and 5-Y...

The BHD930-AG Broad Scan HD by Analog Way is a Broadcast and Professional Computer to Video and High Definition TV Scan Converter. Fitted with Digital DVI and Analog RGB input, it ...

The BHD930-DG Broad Scan HD by Analog Way is a Broadcast and Professional Computer to Video and High Definition TV Scan Converter. Fitted with Digital DVI and Analog RGB input, it ...

Broad Scan SDI™ is a Broadcast and Professional Computer to Video Scan Converter. Fitted with Digital DVI and Analog RGB input, it converts Workstation, PC or Mac graphic images up to 1600x1200@60...

Broad Scan SDI is a Broadcast and Professional Computer to Video Scan Converter. Fitted with Digital DVI and Analog RGB input, it converts Workstation, PC or Mac graphic images up to 1600x1200@60Hz...

The TV One C2-160 PCI/ISA Card Down Converter is based on TV One’s exclusive CORIO2™ technology and provides high quality scan conversion from Computer or HDTV signals to standa...

VGA Video Input	1x HD-15 Male Connector
Analog Input Signal Type	RGBHV, RGBS, RGsB, YPbPr
Sync	TTL Level, 10K&Omega, Pos or Neg
Termination	Auto-terminating into 75&Omegal
R-G-B Level Range	0.5-2.0 Vp-p

The TV One C2-2375A Universal 3G-SDI Converter is based on TV One’s exclusive CORIO®2 technology and provides high quality bi-directional conversion between a variety of analog a...

SDI inputs	1x SD/HD/3G-SDIwith re-clocked out
DVI inputs	2x DVI
Analog inputs	2x CV/YC/YUV/YPbPr
Genlock inputs	1x Tri/Bi with loop-through
Supports	NTSC, PAL, PAL-M, PAL-N, SECAM

The CNRJ11 is a 1-1 converter used to adapt between a standard 4-wire Cresnet cable and a modular Cresnet cable. One 4-pin connector and one 6-pin RJ11 jack are provided, wired in ...

The Datavideo DAC-50S converts 3G/HD-SDI video to one of the following analogue outputs:

• 1 x component (YUV) output & 1 x composite (CV) output including stereo a...
  

The Datavideo DAC-60 is an HD/SD-SDI to VGA Converter. Rack mount kit available. It fits 8x DAC-60 in a 2RU 19" rack mount. Please look at RMK-2.

Datavideo DAC-7 is a small but powerful mini converter that enables users to convert the output from any camera, including prosumer level cameras, to professional SD-SDI for easy c...

Datavideo DAC-70 up/down/cross converter is designed to convert video signals from VGA, HDMI, SDI with Audio input to 3G/HD/SD SDI ouptuts.

Perfect for connecting a ...

The DAC-8P is small and intelligent converter for converting HD & SD-SDI to HDMI.

Datavideo's DAC-8P converts from both HD-SDI and SD-SDI to HDMI enablin...

Datavideo's DAC-8PA SDI to HDMI Converter transforms an SDI video signal along with embedded audio for output on an HDMI output port, which has a support tab. It supports both US a...

Many new High Definition camcorders and devices provide HDMI as the only High Definition output option. Datavideo's DAC-9P allows users to connect HDMI devices to professional SDI ...

If you want to upgrade your existing CCTV system to a Hi-Tech digital PTZ camera system; DR-AD300 is the prefect solution for you. The Bolide DR-AD300 is designed to work with Coax...

The Bolide DR-AD3016 coaxial converter is another newly developed converter with high performances, multi-function and extendibility. With built-in high performance CPU module and ...

The Digital Watchdog DWC-GPLT is a Converter Plate for Electronic Gang Box for MEGApix® PANO™ Dome Camera, Snapit™ Cameras, Surface Mount Dome Cameras, V5-6 Outdoor Domes, D3...

The EAUP-16RJ i3DVR International produces a range of camera and
DVR accessories applicable for many retail, commercial and industrial applications. From aluminium camera br...

The FC10ETH is a bi-directional RS-232 or RS-485 to Ethernet control signal converter. The FC-10ETH allows two RS-232 (or one RS-232 and one RS-485) controllable d...

→ Ethernet Interface	10/100BaseT Ethernet
→ Serial Interfaces	2 RS-232 connectors, signals: RX, TX, RTS, CTS, ground on 9-pin D-sub (M) ports; 1 RS-485 on a detachable terminal block connector
→ Network Protocols	ICMP, ARP (ping), TCP, UDP
→ Power Source	12V DC, <80mA
→ Dimensions	12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H

The FC113 is a high-performance format converter for HDMI signals. The FC113 converts an HDMI input signal to two identical SDI video signals with embedded audio.<...

→ Input	1 HDMI connector
→ Outputs	2 SD/HD-SDI, 3G HD-SDI on BNC connectors
→ Max. Data rate	Up to 3Gbps
→ Standard Compliance	HDMI
→ Input Formats	525i, 625i; 1080p @23.98/24/25/29.97/30/50/59.94/60; 1080i @50/59.94/60; 720p @50/59.94/60

The FC31xl is a high-performance format converter for computer graphics signals with resolutions up to and including WUXGA. The FC 31xl converts a computer graphic...

→ Input	1 UXGA on a 15-pin HD connector
→ Output	1 DVI , 1.2Vpp on a DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
→ Supported Resolutions	640x480 @60Hz/72Hz/75Hz/85Hz; 720x400 @70Hz/85Hz; 800x600 @56Hz/60Hz/72Hz/75Hz/85Hz; 848x480 @60Hz; 1024x768 @60Hz/72Hz/75Hz/85Hz; 1152x864 @75Hz; 1280x768 @60Hz (RB)/75Hz/85Hz; 1280x800 @60Hz; 1280x960 @60Hz/85Hz; 1280x1024 @60Hz/75Hz/85Hz; 1360x768 @60Hz; 1400x1050 @60Hz(RB)/75Hz; 1440x900 @60Hz; 1440x1050 @60Hz; 1600x1200 @60Hz; 1680x1050 @60Hz; 1920x1080 @60Hz; 1920x1200 @60Hz(RB)
→ DVI Bandwidth	1.65GHz
→ Controls	DIP-switches

The FC32 is a high-performance format converter for DVI-D signals. The FC 32 converts (without scaling) a DVI-D input to a computer graphics or component video out...

→ Input	1 DVI-D, 1.2Vpp on a Molex 24-pin (F) connector, DDC signal 5Vpp (TTL)
→ Outputs	1 VGA or YPbPr on a 15-pin HD (F) connector; YPbPr is with bi-level sync
→ Resolution	Up to WUXGA, 1080p
→ Control	Switch for RGB/YPbPr selection
→ Power Source	5V DC, 490mA

The FC321 is a high-performance format converter for 3G HD-SDI signals. The FC 321 converts one of two 3G HD-SDI signals to an HDMI output signal with the same res...

→ Inputs	2 SDI, HD-SDI, 3G HD-SDI on a BNC connector
→ Output	1 HDMI connector
→ Max. Data Rate	Up to 3Gbps
→ Standard Compliance	HDMI
→ Indicator LEDs	SD/HD, OUT, ON

The FC322 is a high-performance format converter for 3G HD-SDI signals. The FC 322 converts one of two 3G HD-SDI signals to two HDMI output signals with the same r...

→ Inputs	2 SDI, HD-SDI, 3G HD-SDI on BNC connectors
→ Outputs	2 HDMI connectors
→ Max. Data Rate	Up to 3Gbps
→ Standard Compliance	HDMI
→ Indicator LEDs	SD/HD, OUT, ON

The FC331 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 331 converts the input video format (with embedded audio) to an HDMI out...

→ Input	1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
→ Outputs	1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector, 1 HDMI connector
→ Max. Data Rate	Up to 3Gbps
→ Standard Compliance	HDMI
→ Indicator LEDs	SD/HD, OUT, ON

The FC332 is a high-performance format converter for video signals up to 3G HD-SDI. The FC 332 converts the input video format (with embedded audio) to two HDMI ou...

→ Input	1 SDI, HD-SDI, 3G HD-SDI on a BNC connector
→ Outputs	1 SDI, HD-SDI, 3G HD-SDI loop on a BNC connector; 2 HDMI connectors
→ Max. Data Rate	Up to 3Gbps
→ Standard Compliance	HDMI
→ Indicator LEDs	SD/HD, OUT, ON

The FC−340 is a broadcast−quality video scaler, audio embedder/de−embedder and scan converter for digital video signals up to 3G HD−SDI. The unit inputs an SDI signal and s...

This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.

The FC400 i...

→ Inputs	1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 SYNC (genlock): looped 75Ω/Hi-Z on BNC connectors
→ Outputs	1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1 Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4- pin connector
→ Video Standards	NTSC (3.58) or PAL-B (DIP-switch selectable). No standards conversion
→ Digital Resolution	10 bits
→ Bandwidth (-0.5dB)	5MHz

The FC−4002 is a high−performance broadcast quality, universal video transcoder for analog video signals. It converts a composite video, s−Video (Y/C) or component video (RGB...

Kramer's FC−46H2 is a professional HDMI audio de−embedder for HDMI signals up to 4K@60Hz (4:4:4) resolution. The unit de−embeds the audio signal from the HDMI input or from t...

This item is DISCONTINUED.  For alternate solution see Kramer FC-46H2

The Kra...

→ Input	1 HDMI connector
→ Outputs	1 HDMI connector, 1 TOSLINK® optical digital audio connector, 1 S/PDIF digital audio on an RCA connector, 1 unbalanced stereo audio on a 3.5mm mini connector
→ Operation Frequency	Supports up to 2.25Gbps (1080p @60Hz) 36-bit Deep Color
→ Compliance with Standards	Supports HDMI, HDCP 1.4
→ Controls	Audio source select button

The FC7402 is a format converter for SDI (SMPTE 259M) signals. The FC 7402 converts an SDI video signal to composite video, s-Video (Y/C), and RGB/component (RGsB ...

→ Input	1 SDI: SMPTE 259M, ITU-R BT.601 (CCIR-601), 75Ω on a BNC connector
→ Outputs	1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (luma), 0.3Vpp/75Ω (chroma) on a 4-pin connector; 1 component: RGB/Y, R-Y, B-Y (1V, 0.7V, 0.7V/75Ω) on BNC connectors; 1 SDI (reclocked): SMPTE 259M, ITU-R BT.601 (CCIR-601) 75Ω on a BNC connector
→ Resolution	10-bit
→ Bandwidth (-3dB)	5.7MHz
→ Non-Linearity	/-1.0%

The FC-7501 is a format converter for composite video, s-Video or component video (YUV) signals. The FC7 501 converts either PAL, SECAM, and NTSC composite video, ...

→ Input	1 composite video: 1Vpp/75Ω (Y) looping on BNC connectors with a termination switch; 1 (B-Y): 0.7Vpp/75Ω looping on BNC connectors with a termination switch; 1 (R-Y)/C 0.7Vpp/0.3Vpp/75Ω looping on BNC connectors with a termination switch
→ Outputs	2 SDI on BNC connectors
→ Video Standards	CV, Y/C: NTSC (M, Japan, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L)
→ Bandwidth (-3dB)	6MHz
→ Resolution	10 bits

The EIKI HQVIEW100S Harnesses the power of the Reon™ video processor running state of the art HQV™ algorithms with expertly designed hardware and firmware from Calibre,...

The EIKI HQVIEW200S Harnesses the power of the Reon™ video processor running state of the art HQV™ algorithms with expertly designed hardware and firmware from Calibre,

Harnessing the power of the ReonTM video processor running state of the art HQVTM algorithms with expertly designed hardware and firmware from Calibre, HQView500S is a highly flexi...

Harnessing the power of the ReonTM video processor running state of the art HQVTM algorithms with expertly designed hardware and firmware from Calibre, HQView510 is a highly flexib...

Harnessing the power of the ReonTM video processor running state of the art HQVTM algorithms with expertly designed hardware and firmware from Calibre, HQView520 is a highly flexib...

HQView530 is a universal image scaler and scan converter which provides stunning image quality for professional, broadcast and corporate AV users. HQView530 featur...

The Nitek MC712SG-10 (10KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. ...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1550R
Typical Distance	10km

The Nitek MC712SG-20 (20KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. ...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1550R
Typical Distance	20km

The Nitek MC712SG-40 (40KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. ...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1550R
Typical Distance	40km

The Nitek MC712ST-20 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full duplex/ha...

The Nitek MC712ST-40 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full duplex/hal...

The Nitek MC712ST-60 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full duplex/ha...

The Nitek MC713SG-10 (10KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. ...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1550T/1310R
Typical Distance	10km

The Nitek MC713SG-20 (20KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. ...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1550T/1310R
Typical Distance	20km

The Nitek MC713SG-40 (40KM) is a compact WDM single fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. ...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1550T/1310R
Typical Distance	40km

The Nitek MC713ST-20 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full duplex/ha...

The Nitek MC713ST-40 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full duplex/ha...

The Nitek MC713ST-60 are compact WDM single fiber bi-directional fiber optic media converters. Each converter features LED diagnostics for power, activity, link and full duplex/hal...

The Nitek Gigabit Multi-Mode Dual Fiber Media Converter MC721MG-1 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC ...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	1000BaseT (1) RJ45 Jack
Fiber	1000BaseFX (1) SC Duplex Connector
Wavelength	850T/850R

The Nitek 10/100TX to 100FX Multi-Mode Dual Fiber Media Converter MC722MT-2 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfil...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (2) SC Duplex Connectors
Wavelength	1310nm

The Nitek MC722SG-10 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emission standards. Each converter features L...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R
Typical Distance	10km

The Nitek MC722SG-20 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emission standards. Each converter features L...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R
Typical Distance	20km

The Nitek MC722SG-40 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emission standards. Each converter features L...

IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R
Typical Distance	40km

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-100 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emiss...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-20 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emissi...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-40 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emissi...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-60 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emissi...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R

The Nitek Single-Mode Dual Fiber Media Converter MC722ST-80 is a compact dual fiber media converter. The standalone device is constructed of a metal cases to fulfill the FCC emissi...

Unit	Transceiver
IEEE	802.3, 802.3u
Ethernet	10/100BaseT (1) RJ45 Jack
Fiber	100BaseFX (1) SC Duplex Connector
Wavelength	1310T/1310R

The NVT UTP Video Passive Transmitter 12VDC Converter NV-226J-PV Video Transmitter 12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC conv...

Video Common-mode / Differential-mode rejection	50 KHz to 10 MHz 60 dB typ
Video Impedance Coax, male BNC	75 ohms
Video Impedance UTP, RJ45 Data Connector	100 ohms
Camera Input voltage	13 to 30 VAC/DC
Camera Input current	Class II SELV floating power supply

The JVC ProHD-4601 HDMI to SDI Converter converts an HDMI input to two SDI outputs, uncompressed, with embedded audio, allowing you to send the HDMI signal to two SDI devices. A me...

The PT-1SPDIF is a format converter for S/PDIF digital audio signals. It converts an S/PDIF signal to a TOSLINK® optical signal.

The PT-2SPDIF is a format converter for S/PDIF digital audio signals. It converts an S/PDIF signal to a TOSLINK® optical signal.

The American Dynamics RCSN422 SensorNet to RS-422 Code Converter converts SensorNet communication from the ADTT16E controller to the RS-422 protocol. This provides a migration pat...

The AVUE SDH-R01 (SDI/HD-SDI/3G-SDI to HDMI) utilizes the latest chipset conversion technology to seamlessly convert broadcast-quality SDI signals to HDMI. Not only does it conver...

The AVUE SDH-T01 HDMI to SDI converter converts HDMI audio/video embedded signals to broadcast-quality SDI signals, utilizing the latest video conversion technology for a more accu...

This item is DISCONTINUED. Please contact [email protected] for a suitable alternative.

The SP12HD ...

→ Inputs	1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 1 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on a BNC connector
→ Outputs	1 composite video: 1Vpp/75Ω on a BNC connector; 1 Y/C: 1Vpp/75Ω(Y), 0.3Vpp/75Ω (C) on a 4-pin connector; 1 component: Y/R-Y/B-Y (1Vpp/0.7Vpp/0.7Vpp)/75Ω on BNC connectors; 2 SDI: SMPTE-259M, SMPTE-292M, SMPTE-344M, ITU-R BT.601 on BNC connectors
→ Bandwidth	0.5dB to 5MHz (SDTV), to 10MHz (EDTV), to 30MHz (HDTV), fully loaded
→ S/N Ratio	60dB
→ Standards	CVBS (SDTV): PAL-B/D/G/H/I/M/N, NTSC-3.58/4.43, SECAM; EDTV: 480p/60, 576p/50; HDTV: 720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98, 1080p/24, 1080p/25, 1080p/29.97, 1080p/30, 1080psf/23.98, 1080psf/24, 1080psf/25, 1080psf/29.97 and 1080psf/30

The ToteVision CV-500 is a SDI Transmitter, generating a SMPTE compliant serial digital output signal.

The ToteVision CV-600 is a 3G/HD/SD-SDI to HDMI Converter, generating HDMI compliant format from a SMPTE compliant serial digital input signal.

The VM−2DH is a converter for DisplayPort signals. The unit inputs a DisplayPort signal that it converts to HDMI and DVI outputs.

The VP1 is a high-performance passive format converter for all RGBHV and 15-pin HD connector applications. The VP1 converts 15-pin HD computer graphics video signa...

→ Input	VGA/UXGA on a 15-pin HD (F) connector or RGBHV on BNC connectors
→ Outputs	RGBHV on BNC connectors or VGA/UXGA on a 15-pin HD connector
→ Max. Output Level	4Vpp/75Ω
→ Bandwidth (-3dB)	1800MHz (1.8GHz)
→ Controls	ID bit on/off

The VP-100 is a high-performance format converter for computer graphics video signals. The VP 100 converts a computer graphics video signal on a 15-pin HD connecto...

→ Input	Looping analog red, green, blue signals: 0.7Vpp/75Ω, H & V sync, TTL level, on a 15-pin HD (F) connector
→ Outputs	1 analog red, green (with or without composite sync), blue signals: 0.7 Vpp/75Ω; H & V syncs: TTL level (Hi-Z load) or analog level (75Ω load) on BNC connectors; composite sync: TTL levels (Hi-Z load) or analog level (75Ω load)
→ Video Bandwidth (-3dB)	350MHz
→ Diff. Gain	0.07%
→ Diff. Phase	0.03Deg

The VP-102xl is a high-performance format converter for computer graphics video and stereo audio signals. The VP 102xl converts a computer graphics video signal on...

→ Input	1 UXGA on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini-jack
→ Output	1 RGBHV on 5 BNC connectors; 1 UXGA active loop on a 15-pin HD (F) connector; 1 unbalanced stereo audio on a 3.5mm mini-jack
→ Max. Output Level	Video: 2Vpp; Audio: 6.8Vpp
→ Bandwidth (-3dB)	Video: 420MHz; Audio: >100kHz
→ Diff. Gain	0.05%

The VP-14xl is a port extender for RS-232, RS-485 or USB command signals. The VP 14xl converts the incoming commands to three RS-232 outputs.
 

The VP43xl is a bi-directional converter between RS-232, RS-485, and RS-422 formats. Input data into the VP 43xl, any format, is converted to the other two formats...

→ Input/Output	RS-232 IN on 9-pin D-sub (F), RS-232 OUT on 9-pin D-sub (M) compliant to TIA/EIA-232-F. RS-485 on 3 wires detachable terminal block compliant to TIA/EIA-485-A. RS-422 on 9-pin D-sub (F) compliant to TIA/EIA-422-B
→ Baud Rates	1200, 2400, 9600, 19200, 38400
→ Format	1 start bit, 8 data bits, 1 stop bit
→ Display	Power ON LED
→ Power Source	12V DC, 80mA

The VP−501N is a scan converter for computer graphics and HDTV component video signals. It converts the input up to UXGA (1600x1200) and HDTV (1080p) to composite and s−Video (...

The VP−505 is a high−performance scan converter for digital video signals up to 3G HD−SDI. The unit de−embeds the audio to unbalanced stereo audio and down−scales the vid...

This item is DISCONTINUED.

The VP−506 is a high−quality scan converter for down−scaling DVI, computer graphics (VGA) and component vid...

The VP-701xl is a scan converter for computer graphics video signals. The VP 701xl converts computer graphics video signals up to 2048x2048 or HDTV signals up to 1...

→ Input	1 computer graphics or component HDTV on a 15 pin HD (F) connector plus loop
→ Output	2 CV on a BNC connector, 2 s-Video on a 4-pin connector
→ Input Resolution	Up to 2048x2048 (computer) and 1080p (HDTV). 24-100kHz H-Freq & 40-150Hz V-Freq
→ Output Standards	NTSC or PAL (selectable)
→ Controls	Front panel, IR, and RS-232

The VP-704xl is a scan converter for computer graphics video signals. VP 704xl converts a computer graphics video signal up to 2048x2048 or an HDTV signal up to 10...

→ Input	1 computer graphics (RGB/S/HV) or component HDTV on a 15 pin HD (F) connector plus loop; 1 CV & 1 Y/C for genlock
→ Output	NTSC or PAL (selectable). 1 CV (BNC), 1 s-Video (4-pin) & 1 YUV/Y, R-Y, B-Y (BNCs)
→ Input Resolution	Up to 2048x2048 (computer) and 1080p (HDTV). 24-100kHz H-Freq & 40-150Hz V-Freq
→ Control	Front panel, IR, and RS-232
→ Power Source	100-240V AC