Audio Video Supply | Wholesale | Cameras | Lenses

PCIe X4 Frame Grabber For High Resolution, High Quality, Analog Video

The EPIX Analog Video for PCI Express PIXCI-A310 video frame grabber acquires images from monochrome or component RGB color, interlaced or progressive scan, from cameras or other...

Video Formats	UXGA, WSGA , WXGA, SXGA , SXGA, XGA, SVGA, VGA, RS343, CCIR, RS-170, and others
Supported Resolutions Include	1920x1080p, 1920x1080i, 1280x720p, 720x480p, 720x576p, and others
Bit Depth	30, 24, 10, or 8 bits per pixel
Pixel Clock Range	12 MHz to 165 MHz
Maximum PCIe Data Rate	700 Megabyte per second sustained data transfer

More Information

EPIX: pixci-cl1

Camera Link Interface

The EPIX Camera Link for PCI PIXCI-CL1 accepts data from a Camera Link camera while providing exposure, reset, and serial control. The PIXCI® CL1 capture and control board...

Resolution	8 to 4,096 pixels per line; 1 to 4,096 lines per image (area scan); 1 to 65,534 lines per image (line scan)
Signals	Differential RS-644; Differential Trigger IN / Strobe OUT; 2 TTL input/outputs
Connections	1 26-pin Camera Link; 1 9-pin D-Subminiature; 2 10-pin headers
Maximum frame rate	Camera Dependent
CE / FCC Certification	PIXCI CL1 was tested per EMC directive 89/336/EEC and performed to class B

More Information

EPIX: pixci-cl2

64-Bit/66MHz PCI Interface Board For Full, Medium & Base Configuration Camera Link Cameras

The EPIX Camera Link for PCI PIXCI-CL2 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the 64-bit/ 66MHz PCI bus, the CL2 board...

PCI Bus

64-bit/66MHz or PCI-X

More Information

EPIX: pixci-d2x

Frame Grabber Supports Over 300 Digital Output Cameras

The EPIX Camera Link for PCI PIXCI-D2X is designed for scientific and machine vision applications that require the highest image quality. To insure that precise camera data is...

Resolution	8 to 4,096 pixels per line, 1 to 4,096 lines per image (area scan), 1 to 65,534 lines per image (line scan)
Signals	Differential RS-644 or RS-422 camera / board signaling (camera dependent). Differential Trigger IN / Strobe OUT 2
Maximum frame rate	Camera Dependent
Connections	1 68-pin (SCSI II) cable receptacle, 2 10-pin headers
CE / FCC Certification	PIXCI D2X was tested per EMC directive 89/336/EEC and performed to class B.

More Information

EPIX: pixci-d3x

Frame Grabber Supports Over 24 Multi-Channel Digital Output Cameras

The EPIX Camera Link for PCI PIXCI-D3X is a PCI-compatible imaging board supporting camera configurations with 3 to 8 data channels, or with 30 to 64 total data bits - cameras...

Resolution	8 to 4,096 pixels per line, 1 to 4,096 lines per image (area scan), 1 to 65,534 lines per image (line scan)
Signals	Differential RS-644, Differential Trigger IN / Strobe OUT (Optional "TTL Module" allows TTL Trigger IN and TTL Strobe OUT)
Connections	1 100-pin cable receptacle, 2 10-pin headers
Maximum frame rate	Camera Dependent
CE / FCC Certification	PIXCI D3X was tested per EMC directive 89/336/EEC and performed to class B.

More Information

EPIX: pixci-e104x4

Embedded Camera Link Applications PCIe/104 Frame Grabber

The EPIx PIxCI e104x4 is a PCIe/104 Frame Grabber For Embedded Camera Link Applications.

SIGNAL INPUT & OUTPUT	EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz.
CONNECTIONS	Four 26 pin MDR Camera Link connectors for up to four Base cameras or one or two 10 tap, Full, or Medium cameras. Two 10 pin headers for trigger inputs and strobe outputs.
BUS REQUIREMENTS	Type 1 Bottom-Stacking PCIe/104 V2.01 With Gen 2.0 Protocol (2.5 to 5 GT/s)
POWER REQUIREMENTS	12 V @ 120 mA 3.3 V @ 720 mA Total 3.816 Watts
DIMENSIONS	11.56 cm long by 9.59 cm high (4.55"" long x 3.775"" high)

More Information

EPIX: pixci-e4db

Dual Base Camera Link Frame Grabber For PCI Express

The EPIX Camera Link for PCI Express PIXCI-E4DB frame grabber connects two Base camera link cameras to the PCI Express bus. The PIXCI E4DB is handled by EPIX software as if two...

More Information

EPIX: pixci-e8

PCI Express X8 Frame Grabber For High Bandwidth Camera Link Cameras

The EPIX Camera Link for PCI Express PIXCI-E8 is a Camera Link frame grabber supporting the highest data rate cameras. The PIXCI E8 supports more than 900 Extended, Full, Medium,...

More Information

EPIX: pixci-eb1

Low Cost & Profile, PoCL Base Camera Link PCI Express Frame Grabber

The EPIX Camera Link for PCI Express PIXCI-EB1 is a low cost, low profile frame grabber with Power over Camera Link (PoCL). The PIXCI EB1P is compatible with all area scan and...

Signal Input & Output	EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz
Conections	One 26-pin 3M MDR Camera Link connector for Base. 6-pin connector for Trigger, Frame Enable, and Strobe. Camera Link cables available
Data Transfers	Supports cameras with data output rates up to 250 MBytes/second. 64-bit memory addressing
Bus Requirements	PCI Express x1 slot. Operates in PCI Express x16, x8, x4, or x1 slot
Dimesions	8.38 cm long by 6.88 cm high (3.30" long x 2.71" high)

More Information

EPIX: pixci-eb1mini

Smallest Camera Link Frame Grabber

The PIXCI EB1mini frame grabber provides a vertical Camera Link SDR connector with FPGA on a single printed circuit board using a full size mini card slot. At the maximum Camera...

More Information

EPIX: pixci-eb1minif

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniF moves the Camera Link connector to a separate board and connects the two with detachable flat ribbon cable. This allows for more mounting options in space...

More Information

EPIX: pixci-eb1minig

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniG has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less...

More Information

EPIX: pixci-eb1minih

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half...

More Information

EPIX: pixci-ec1

ExpressCard - Notebook Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-EC1 frame grabber supports all Full, Medium, and Base configuration Camera Link cameras with bandwidth requirements of 191 Megabytes...

More Information

EPIX: pixci-ecb1

ExpressCard - Notebook Base Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-ECB1 frame grabber supports all Base configuration Camera Link cameras with bandwidth requirements of 191 Megabytes (1528 Mbits) per...

More Information

EPIX: pixci-ecb1-34

Base Camera Link ExpressCard/34 Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI ECB 134 base Camera Link frame grabber plugs into an ExpressCard/34 or ExpressCard/54 slot in a notebook computer. With 200 megabyte per...

More Information

EPIX: pixci-ecb2

ExpressCard - Notebook Dual Base Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-ECB2 frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI ECB2 is handled by EPIX' software as if two...

More Information

EPIX: pixci-el1

Low Cost PCI Express X1 Frame Grabber For Camera Link Cameras

The EPIX Camera Link for PCI Express PIXCI-EL1 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the PCI Express x1 (by one) bus,...

More Information

EPIX: pixci-el1db

Dual Base Camera Link Frame Grabber In One PCI Express X1 Expansion Slot

The EPIX Camera Link for PCI Express PIXCI-EL1DB frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI EL1DB is handled by EPIX' software as if two...

More Information

EPIX: pixci-si2

Silicon Video Frame Grabbers, Up To 2 Cameras

The EPIX Silicon Video Frame Grabbers PIXCI-SI2 frame grabber provides low cost high resolution capture from two SILICON VIDEO cameras. Two cameras, operating at maximum...

Bus requirements	PCI Express bus x1 thru x16 slot.
Power requirements	1.56 Amps @ 3.3 Volts, 0.21 Amps @ 12 Volts With two SV9T001C 3-megapixel color cameras at 48 MHz pixel clock.
Dimensions (excluding bracket)	3.94 inches long by 2.75 inches high, 100 mm long by 70 mm high (Available with standard or low profile bracket.)
Transfer rates	Provides burst transfer rates, from cameras to on-board memory, up to 280 megabytes per second. Transfer rates from on-board memory through the PCI Express bustypically reach 202 megabytes per second
On-board memory	64 megabytes of frame buffer memory

More Information

EPIX: pixci-si1

Silicon Video Frame Grabbers, Supports One Camera

The EPIX Silicon Video Frame Grabbers PIXCI-SI2 frame grabber provides low cost high resolution capture from two SILICON VIDEO cameras. Two cameras, operating at maximum...

More Information

EPIX: pixci-si4

Silicon Video Frame Grabbers, Up To 4 Cameras

The EPIX Silicon Video Frame Grabbers PIXCI-SI4 frame grabber supports 1 to 4 SILICON VIDEO cameras. Cameras may be identical or mixed, and can operate simultaneously or...

More Information

EPIX: pixci-sv5

Analog Video For PCI, 2 BNC And 1 S-Video Multiplexed Inputs

The EPIX Analog Video for PCI PIXCI-SV5 is a video-rate frame grabber that captures high quality, uncompressed, scientific quality digital images from standard analog output video...

4 Pin DIN	S-Video Input
Two BNC-Jacks	Composite Video Inputs
DB15	TTL I/O Triggers
Color or Monochrome Video Acquisition	S-Video, RS-170, CCIR, NTSC, PAL
Resolution-Pixels	754x480: RS-170, NTSC, S-Video 922x580: CCIR, PAL, S-Video

More Information

EPIX: pixci-sv5a

Analog Video For PCI, 3 Multiplexed BNC Inputs

The EPIX Analog Video for PCI PIXCI-SV5A offers 3 multiplexed BNC inputs. All other features on the PIXCISV5A are identical to the PIXCI

Capture FIELDs to Double the Capture Rate	If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames	If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame	This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards	As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory	The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

More Information

EPIX: pixci-sv5b

Analog Video For PCI, 1 BNC Input And 1 Loop Thru BNC Output

The EPIX Analog Video for PCI PIXCI-SV5B offers 1 BNC input and 1 Loop Thru BNC output. The S-Video and trigger connectors are removed to allow for a low-profile PCI form factor...

Capture FIELDs to Double the Capture Rate	If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames	If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame	This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards	As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory	The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

More Information

EPIX: pixci-sv5l

Analog Video For PCI, 2 Mini BNC And 1 S-Video Multiplexed Inputs

The EPIX Analog Video for PCI PIXCI-SV5L offers 2 Mini BNC and 1 S-Video multiplexed inputs. The PIXCISV5L trigger connector has been removed to allow for a...

Capture FIELDs to Double the Capture Rate	If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames	If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame	This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards	As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory	The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

More Information

EPIX: pixci-sv5s

Analog Video For PCI, 2 BNC And 1 S-Video Multiplexed Inputs

The EPIX Analog Video for PCI PIXCI-SV5S offers 2 BNC and 1 S-Video multiplexed inputs. The PIXCISV5S adds additional circuitry that separates the vertical sync....

Capture FIELDs to Double the Capture Rate	If fast capture rate is more important than vertical resolution, then selecting the Field at Field mode doubles a field capture rate while cutting vertical resolution in half. Capture 50 fields per second from a PAL or CCIR camera; capture 60 fields per second from an NTSC or RS-170 camera
Capture FIELDs instead of full Frames	If memory or storage capacity is limited, and field resolution is sufficient, then selecting, Field at Frame allows the capturing of a sequence of fields instead of a sequence of frames (at the camera’s 25 frames per second (fps) PAL/CCIR or 30 fps NTSC/RS-170). The PIXCI SV5 Video Format menu allows resolution selection in single pixel increments for greater control, but Field at Frame offers a simple “one-click” option for added convenience
Capture Frame at Frame	This is the default capture option offering maximum vertical resolution images at the camera’s frame rate. Selected Capture from Three Video Sources using one PIXCI SV5(A): The PIXCI SV5 imaging board features a 3-input video multiplexer that allows signal selection from two BNC and one S-Video input. The PIXCI SV5A allows signal selection from three BNC inputs
Capture from Multiple PIXCI SV5 boards	As many as eight PIXCI® SV5 boards can be installed in one computer allowing selected capture from multiple video sources controlled by a single program. Because the multiplexer on each board allows connection of up to 3 sources, a total of 24 sources can be connected. Simultaneous capture from up to eight sources is possible – subject to the bandwidth constraints of the PCI bus or buses on the selected motherboard. There are motherboards with multiple PCI buses. Each PCI bus has a bandwidth of approximately 110 megabytes per second. Capture Short Sequence with Selected Image Save: The XCAP-Lite imaging program, provided at no charge with the purchase of the PIXCI SV5 imaging board, allows sequence capture into as much as 64 Mbytes of computer memory. Individual images can be saved one at a time
Capture and Save Sequence into PC Memory	The optional XCAP-Ltd imaging program allows maximum resolution and frame rate sequence capture into the computer’s available memory, to a maximum of approximately 3 to 3.5 gigabytes. At full resolution and frame rate, capture a color sequence with duration of 150 seconds, or a monochrome sequence with duration of 300 seconds. Capture and Save Sequence to Hard Drive: The optional XCAP-Std imaging program ($1495) allows maximum resolution and frame rate sequence capture direct to a 7200 rpm drive or to a RAID system. Using a 750 gigabyte drive, XCAP-Std can capture a full resolution uncompressed sequence for up to 5 hours from a color source, or for up to 10 hours from a monochrome source. Longer sequence capture is available with more drives

More Information

EPIX: pixci-sv7

Dual Composite Video Express Bus Frame Grabber

The EPIX Analog Video for PCI Express PIXCI-SV7 digitizes analog video from one or two standard composite video cameras (NTSC, RS-170, PAL or CCIR). The two inputs are...

Camera video formats

TSC, RS-170, PAL or CCIR

More Information

EPIX: pixci-sv8

Color & Monochrome Analog Video Frame Grabber

The EPIx PIxCI SV8 is a Frame grabber for color and monochrome analog video: S-Video, NTSC, PAL, RS-170,

Video connections	One S-Video input. Four HD-BNC inputs. Six optional video inputs.
Trigger and I/O Header	Trigger in and out. Frame Enable in and out. Dual GPIO in and out. Eight optional ins or outs.
Bus	PCI Express x1 or wider.
Power Requirements	12 V @ 70 mA 3.3 V @ 390mA Total 2.127 Watts
Dimensions	3.45 inches long by 2.713 inches high. (8.67 cm long by 6.89 cm high).

More Information

EPIX: silicon-video-022

Custom Cameras

SV022C and SV022M cameras feature small size and LVDS differential digital video output. Images with 8 or 10 bits per pixel, 752H by 480V, 60 frames per second...

More Information

EPIX: silicon-video-035

Custom Cameras

The SV035C camera features a very small size and NTSC or PAL analog video output over RG-179 coax. The SV035C uses a high performance Aptina MT9V135 image sensor...

More Information

EPIX: silicon-video-10c6

Color 10 Megapixel Camera

The EPIX Silicon Video Camera SV 10C6 color, or 10M6 monochrome camera, offers 10 megapixel progressive scan capture in an active programmable array resolution of 3840H x 2764V...

Optical Format	1/2.3-inch
Active Image Size	6.41mm(H) x 4.62mm(V)
Full Resolution	3840H x 2764V
Pixel Size	1.67µm x 1.67µm
Color Filter Array	Monochrome or Color RGB Bayer Pattern

More Information

EPIX: silicon-video-10m6

Monochromatic 10 Megapixel Camera

The EPIX Silicon Video Camera SV 10C6 color, or SV 10M6 monochrome camera, offers 10 megapixel progressive scan capture in an active programmable array resolution of 3840H x 2764V...

Optical Format	1/2.3-inch
Active Image Size	6.41mm(H) x 4.62mm(V)
Full Resolution	3840H x 2764V
Pixel Size	1.67µm x 1.67µm
Color Filter Array	Monochrome or Color RGB Bayer Pattern

More Information

EPIX: silicon-video-1281

SILICON VIDEO® 1281 CMOS Cameras With PIXCI® D2X1 PCI Interface

SILICON VIDEO 1281 CMOS camera systems offer the advantages of high resolution progressive scan image capture, low noise digital signalling, small size, convenient software...

More Information

EPIX: silicon-video-1310

SILICON VIDEO® 1310C CMOS Camera With PIXCI® D2X1 PCI Interface

SILICON VIDEO 1310C is a 10-bit Bayer Pattern color camera system with the advantages of high resolution progressive scan image capture, low noise digital signaling, convenient software control,...

More Information

EPIX: silicon-video-1c45

1 Megapixel Color Camera

The EPIX SILICON VIDEO® 1C45 (color) and 1M45 (monochrome) are 1 megapixel progressive scan cameras with a resolution of 1280 horizontal x 960 vertical, 12 bit pixels. The...

Optical Format	1/3-inch
Active Image Size	4.8mm(H) x 3.6mm(V) x 6.0mm Diagonal
Full Resolution	1280H x 960V
Pixel Size	3.75µm x 3.75µm
Color Filter Array	Color (RGB Bayer Pattern)

More Information

EPIX: silicon-video-1m45

1 Megapixel Monochorome Camera

The SILICON VIDEO 1C45 (color) and 1M45 (monochrome) are 1 megapixel progressive scan cameras with a resolution of 1280 horizontal x 960 vertical, 12 bit pixels. The SV1C45 and...

Optical Format	1/3-inch
Active Image Size	4.8mm(H) x 3.6mm(V) × 6.0mm Diagonal
Full Resolution	1280H x 960V
Pixel Size	3.75µm x 3.75µm
Color Filter Array	Monochrome (RGB Bayer Pattern)

More Information

EPIX: silicon-video-2112c

SILICON VIDEO® 2112C CMOS Cameras With PIXCI® D2X PCI Interface

Epix SILICON VIDEO 2112C color camera, from EPIX, Inc., features an active programmable array resolution of 1288 x 1032 pixels, with sub-windowing, sub-sampling, mirror and flip...

More Information

EPIX: silicon-video-2ks

340 fps Stereo Camera

The EPIX SILICON VIDEO 2KS stereo camera has two 2048 pixel by 1088 line global shutter, monochrome or color 5.5 micron pitch sensors on one inch centers. The camera case is 2.125...

Optical Format	2/3 inch
Image Sensor Pitch	5.5 microns
Active Pixels	2048H x 1088V
Full Well Charge	13.5 Ke
Sensitivity	4.64 V/Lux s

More Information

EPIX: silicon-video-5c10

5 Megapixel Capture At 10 Fps With Exceptional Image Quality

The EPIX Silicon Video Camera SV 5C10 (color) and 5M10 (monochrome) camera systems offer 5 megapixel progressive scan capture, low noise digital signaling, small size, flexible...

Format	Bayer Pattern Color (SV5C10) Monochrome (SV5M10)
Pixel Clock Range	25 MHz - 70 MHz
Frame Resolution	2592 (H) x 1944 (V) Maximum, 4 (H) x 4 (V) Minimum
Exposure Time	50 msec Minimum @ 70 MHz 9.15 sec Maximum @ 25 MHz
Camera Head Dimensions	4.85 cm (H) x 3.84 cm (W) x 1.88 cm (D), 1.91" (H) x 1.51" (W) x 0.74" (D)

More Information

EPIX: silicon-video-5m10

5 Megapixel Capture At 10 Fps With Exceptional Image Quality

The EPIX Silicon Video Camera SV 5C10 (color) and 5M10 (monochrome) camera systems offer 5 megapixel progressive scan capture, low noise digital signaling, small size, flexible...

Format	Bayer Pattern Color (SV5C10) Monochrome (SV5M10)
Pixel Clock Range	25 MHz - 70 MHz
Frame Resolution	2592 (H) x 1944 (V) Maximum, 4 (H) x 4 (V) Minimum
Exposure Time	50 msec Minimum @ 70 MHz 9.15 sec Maximum @ 25 MHz
Camera Head Dimensions	4.85 cm (H) x 3.84 cm (W) x 1.88 cm (D), 1.91" (H) x 1.51" (W) x 0.74" (D)

More Information

EPIX: silicon-video-642

204 Frames Per Second

The SILICON VIDEO 642M camera system provides 640 by 480 resolution at 204 frames per second (fps). Reducing the number of lines to 4 allows frame rates up to 19,600 fps. Fast...

More Information

EPIX: silicon-video-643c

Color Silicon Video

The EPIX Silicon Video Camera SV 643C monochrome 643M and color 643C cameras provide 640 by 480 resolution at 211 frames per second (fps). Reducing the number of lines to 2 allows...

Optical Format	1/2 inch
Active Image Size	6.3mm(H) x 4.7mm(V) 7.8mm Diagonal
Active Pixels	640H x 480V
Pixel Size	9.9um x 9.9um
Color Filter Array	Monochrome or Color RGB Bayer Pattern

More Information

EPIX: silicon-video-643m

Monochrome Silicon Video

The EPIX Silicon Video Camera SV 643C monochrome 643M and color 643C cameras provide 640 by 480 resolution at 211 frames per second (fps). Reducing the number of...

Optical Format	1/2 inch
Active Image Size	6.3mm(H) x 4.7mm(V) 7.8mm Diagonal
Active Pixels	640H x 480V
Pixel Size	9.9um x 9.9um
Color Filter Array	Monochrome or Color RGB Bayer Pattern

More Information

EPIX: silicon-video-9c10

9 Megapixel Capture At 10 Fps With Exceptional Image Quality

The EPIX Silicon Video Camera SV 9C10 color camera system offers 9 Megapixel progressive scan capture, low noise digital signaling, small size, flexible interface cable,...

Format	Bayer Pattern Color
Pixel Clock Range	25 MHz - 64 MHz
Frame Resolution	3488 (H) x 2616 (V) Maximum, 4 (H) x 4 (V) Minimum
Exposure Time	55 msec Minimum @ 64 MHz, 9.26 sec Maximum @ 25 MHz
Camera Head Dimensions	4.85 cm (H) x 3.84 cm (W) x 1.88 cm (D), 1.91" (H) x 1.51" (W) x 0.74" (D)

More Information

EPIX: silicon-video-9m001

Silicon Video Camera With Exceptional Image Quality, Small Size And Low Cost

The EPIX Silicon Video Camera SV 9M001 CMOS camera system offers the advantages of high resolution progressive scan image capture, low noise digital signalling, small size,...

Format	SV9M001 Monochrome
Pixel Clock Range	25 MHz - 70 MHz (Adjustable)
Frame Resolution	1280 (H) x 1024 (V) Maximum 4 (H) x 4 (V) Minimum
Exposure Time	22 msec Minimum @ 70 MHz, 436.581 msec Maximum @ 25 MHz
MICRON CMOS MT9M001 Sensor Resolution	1280H x 1024V

More Information

EPIX: silicon-video-9t001c

3.0 Megapixel Progressive Scan Image Capture

The EPIX Silicon Video Camera SV 9T001C offers the advantages of 3.0 Megapixel progressive scan image capture, low noise digital signalling, small size, flexible interface cable,...

Format	Bayer Pattern Color
Pixel Clock Range	25 MHz - 70 MHz
Frame Resolution	2048 (H) x 1536 (V) Maximum, 4 (H) x 4 (V) Minimum
Exposure Time	35 msec Minimum @ 70 MHz 102.25 sec Maximum @ 25 MHz
MICRON CMOS MT9T001 Sensor Resolution	2048H x 1536V

More Information

EPIX: silicon-video-has21

EPIX Monochrome board camera

The EPIX HAS21 board camera uses a High Accuracy Star Tracker (HAS) Version 2 CMOS Active Pixel image sensor which provides 1024 pixel by 1024 line images with 12 bits per pixel...

Sensor	ON Semiconductor NOIH2SM1000T-HHC with BK7G18 radiation resistant optical glass (Formerly Cypress CYIH1SM1000AA-HHCS)
Full Resolution	1024 x 1024
Master Clock	10 MHz
Frame Rate	9 fps
ADC Resolution	12-bit

More Information

EPIX: silicon-video-wgac

Epix Global Shutter- High Dynamic Range Camera

The SILICON VIDEO WGAC (color) and WGAM (monochrome) cameras provide up to 752 pixel by 480 line images with up to 10 bits of grey scale per pixel in a...

Optical Format	1/3-inch
Active Image Size	4.51mm(H) x 2.88mm(V) 5.35mm Diagonal
Active Pixels	752H x 480V
Pixel Size	6.0um x 6.0um
Color Filter Array	Monochrome or Color RGB Bayer Pattern

More Information

EPIX: silicon-video-wgam

Epix Global Shutter- High Dynamic Range Camera Monochrome

The SILICON VIDEO WGAC (color) and WGAM (monochrome) cameras provide up to 752 pixel by 480 line images with up to 10 bits of grey scale per pixel in a...

Optical Format	1/3-inch
Active Image Size	4.51mm(H) x 2.88mm(V) 5.35mm Diagonal
Active Pixels	752H x 480V
Pixel Size	6.0um x 6.0um
Color Filter Array	Monochrome or Color RGB Bayer Pattern

More Information

Call Now: 1-800-284-2288

EPIX

Call Now: 1-800-284-2288

Email Us: sales@avsupply